C-10 Truck Engine 3CS00001-UP BASIC ENGINE Caterpillar SIS

TRUCK ENGINE C-10 TRUCK ENGINE 3CS
C-10 Truck Engine 3CS00001-UP SEBP2603 C-10 3CS (1996)

Parts group C-10:

For full view, you need register

BASIC ENGINE

ADAPTER GP-ENGINE TO XMSN

117-0176 ADAPTER GP-ENGINE TO XMSN
S/N 3CS733-29670
FOR USE WITH @@@@@124-2660@@@@@, @@@@@118-0444@@@@@, @@@@@117-2766@@@@@
CANNOT BE USED WITH @@@@@117-2769@@@@@, @@@@@117-2794@@@@@, @@@@@216-8573@@@@@, REAR POWER TAKE-OFF
ALSO AN ATTACHMENT

117-0206 ADAPTER GP-ENGINE TO XMSN

117-0206 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@118-0444@@@@@
CANNOT BE USED WITH @@@@@117-2769@@@@@, @@@@@117-2794@@@@@, REAR POWER TAKE-OFF
AN ATTACHMENT

117-0207 ADAPTER GP-ENGINE TO XMSN

117-0207 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@118-0444@@@@@, @@@@@117-2769@@@@@
CANNOT BE USED WITH @@@@@117-2793@@@@@
AN ATTACHMENT

117-0208 ADAPTER GP-ENGINE TO XMSN

117-0208 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@117-2769@@@@@, @@@@@118-0444@@@@@, @@@@@117-2766@@@@@
CANNOT BE USED WITH @@@@@117-2793@@@@@
AN ATTACHMENT

124-2665 ADAPTER GP-ENGINE TO XMSN

124-2665 ADAPTER GP-ENGINE TO XMSN
S/N 3CS742-UP
FOR USE WITH @@@@@117-2766@@@@@, @@@@@118-0444@@@@@, VISCOUS DAMPER
CANNOT BE USED WITH @@@@@117-2769@@@@@, @@@@@117-2794@@@@@, @@@@@216-8573@@@@@, REAR POWER TAKE-OFF
ALSO AN ATTACHMENT

142-2024 ADAPTER GP-ENGINE TO XMSN

142-2024 ADAPTER GP-ENGINE TO XMSN
S/N 3CS5587-29230
FOR USE WITH @@@@@117-2766@@@@@, @@@@@118-0444@@@@@, @@@@@117-2769@@@@@
CANNOT BE USED WITH @@@@@117-2793@@@@@
ALSO AN ATTACHMENT

AIR COMPRESSOR GP

129-2859 AIR COMPRESSOR GP

129-2859 AIR COMPRESSOR GP
PART OF 133-7035 AIR COMPRESSOR GP
AN ATTACHMENT

131-6679 AIR COMPRESSOR GP

131-6679 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
PART OF 133-7031, 133-7035, 166-6342 AIR COMPRESSOR GP
Type 1
ALSO AN ATTACHMENT

131-6679 AIR COMPRESSOR GP

131-6679 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
PART OF 133-7031, 133-7035, 166-6342 AIR COMPRESSOR GP
Type 2
ALSO AN ATTACHMENT

132-9814 AIR COMPRESSOR GP

132-9814 AIR COMPRESSOR GP
S/N 3CS748-748
16.5 CFM AT 1250 RPM
PART OF 133-7032, 133-7034 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

133-7031 AIR COMPRESSOR GP

133-7031 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. TWO CYLINDER, SINGLE STAGE, 1.14:1 RATIO
FOR USE WITH @@@@@117-0185@@@@@
ALSO AN ATTACHMENT

133-7032 AIR COMPRESSOR GP

133-7032 AIR COMPRESSOR GP
16.5 CFM, 1.14:1 RATIO
FOR USE WITH @@@@@117-0185@@@@@
AN ATTACHMENT

133-7032 AIR COMPRESSOR GP

133-7032 AIR COMPRESSOR GP
S/N 3CS740-UP
16.5 CFM, 1.14:1 RATIO
FOR USE WITH @@@@@117-0185@@@@@
ALSO AN ATTACHMENT

133-7033 AIR COMPRESSOR GP

133-7033 AIR COMPRESSOR GP
31.0 CFM AT 1250 RPM. FOUR CYLINDER, SINGLE STAGE
AN ATTACHMENT

133-7033 AIR COMPRESSOR GP

133-7033 AIR COMPRESSOR GP
S/N 3CS6042-18374
31.0 CFM AT 1250 RPM. FOUR CYLINDER, SINGLE STAGE
ALSO AN ATTACHMENT

133-7034 AIR COMPRESSOR GP

133-7034 AIR COMPRESSOR GP
S/N 3CS748-748
16.5 CFM, 1.14:1 RATIO
FOR USE WITH @@@@@117-0185@@@@@, @@@@@132-9816@@@@@
CANNOT BE USED WITH @@@@@124-2657@@@@@
ALSO AN ATTACHMENT

133-7034 AIR COMPRESSOR GP

133-7034 AIR COMPRESSOR GP
S/N 3CS749-29190
16.5 CFM, 1.14:1 RATIO
FOR USE WITH @@@@@117-0185@@@@@, @@@@@132-9816@@@@@
CANNOT BE USED WITH @@@@@124-2657@@@@@
ALSO AN ATTACHMENT

133-7035 AIR COMPRESSOR GP

133-7035 AIR COMPRESSOR GP
12.9 CFM AT 1250 RPM. TWO CYLINDER, SINGLE STAGE
AN ATTACHMENT

133-7035 AIR COMPRESSOR GP

133-7035 AIR COMPRESSOR GP
S/N 3CS732-UP
12.9 CFM AT 1250 RPM. TWO CYLINDER, SINGLE STAGE
ALSO AN ATTACHMENT

145-9957 AIR COMPRESSOR GP

145-9957 AIR COMPRESSOR GP
S/N 3CS2169-UP
31.0 CFM AT 1250 RPM
PART OF 133-7033, 165-0590, 165-0591 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

163-6367 AIR COMPRESSOR GP

163-6367 AIR COMPRESSOR GP
S/N 3CS18003-UP
27.0 CFM AT 1250 RPM
PART OF 175-2173 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

164-7564 AIR COMPRESSOR GP

164-7564 AIR COMPRESSOR GP
S/N 3CS477-UP
16.5 CFM AT 1250 RPM
PART OF 133-7032, 133-7034 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

165-0590 AIR COMPRESSOR GP

165-0590 AIR COMPRESSOR GP
31.0 CFM RATED DISPLACEMENT AT 1250 RPM. 4 CYLINDER, SINGLE STAGE, WATER COOLED, GEAR DRIVEN, LEFT HAND
AN ATTACHMENT

165-0591 AIR COMPRESSOR GP

165-0591 AIR COMPRESSOR GP
S/N 3CS2169-9517; 3CS9592-18371
31.0 CFM AT 1250 RPM. 4 CYLINDER SINGLE STAGE

166-6342 AIR COMPRESSOR GP

166-6342 AIR COMPRESSOR GP
13 CFM AT 1250 RPM. MAGNUM AND COUNTRY COACH
FOR USE WITH @@@@@117-0185@@@@@
AN ATTACHMENT

166-7162 AIR COMPRESSOR GP

166-7162 AIR COMPRESSOR GP
PART OF 175-2172 AIR COMPRESSOR GP
AN ATTACHMENT

175-2172 AIR COMPRESSOR GP

175-2172 AIR COMPRESSOR GP
15.6 CFM ,1.14:1 RATIO
FOR USE WITH NON-BOOSTED AIR
AN ATTACHMENT

175-2173 AIR COMPRESSOR GP

175-2173 AIR COMPRESSOR GP
S/N 3CS18003-29230; 3CS29292-UP
27 CFM AT 1250 RPM, 1.14:1 RATIO
FOR USE WITH NON-BOOSTED AIR
ALSO AN ATTACHMENT

117-2791 COVER GP-AIR COMPRESSOR

117-2791 COVER GP-AIR COMPRESSOR
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT

160-2326 COVER GP-AIR COMPRESSOR

160-2326 COVER GP-AIR COMPRESSOR
S/N 3CS25728-29190
FOR USE WITH @@@@@117-0185@@@@@
ALSO AN ATTACHMENT

196-3796 FITTING GP-AIR COMPRESSOR

196-3796 FITTING GP-AIR COMPRESSOR
S/N 3CS19785-29190; 3CS29292-UP
INLET
ALSO AN ATTACHMENT

197-9639 FITTING GP-AIR COMPRESSOR

197-9639 FITTING GP-AIR COMPRESSOR
DISCHARGE
AN ATTACHMENT

197-9640 FITTING GP-AIR COMPRESSOR

197-9640 FITTING GP-AIR COMPRESSOR
S/N 3CS26579-29230
INLET AND DISCHARGE
ALSO AN ATTACHMENT

197-9670 FITTING GP-AIR COMPRESSOR

197-9670 FITTING GP-AIR COMPRESSOR
S/N 3CS23127-29190; 3CS29449-UP
INLET - 60 DEGREE INBOARD. DISCHARGE - 18 DEGREES OUTBOARD
ALSO AN ATTACHMENT

166-6339 PIPE AS-AIR COMPRESSOR LINES

166-6339 PIPE AS-AIR COMPRESSOR LINES
PROVIDES A 6.0 IN OD PIPE WITH A 1.0 IN OD NIPPLE, FOR FIELD CONVERTING THE TF-1400 AIR COMPRESSOR INLET AIR SUPPLY FROM TURBOCHARGED TO NATURALLY ASPIRATED
FIELD INSTALLATION

BELT TIGHTENER GP

136-4279 BELT TENSIONER GP

136-4279 BELT TENSIONER GP
INCLUDES ALTERNATOR BRACKET AND UNFLANGED 370 IN/LB BELT TIGHTENER
ALSO AN ATTACHMENT

136-4280 BELT TENSIONER GP

136-4280 BELT TENSIONER GP
S/N 3CS19193-UP
INCLUDES ALTERNATOR BRACKET AND FLANGED 240IN/LB BELT TIGHTENER
ALSO AN ATTACHMENT

136-4281 BELT TENSIONER GP

136-4281 BELT TENSIONER GP
S/N 3CS732-UP
INCLUDES ALTERNATOR BRACKET, POSITIONING STRAP, AND 370 IN/LB BELT TIGHTENER
ALSO AN ATTACHMENT

136-4282 BELT TENSIONER GP

136-4282 BELT TENSIONER GP
INCLUDES ALTERNATOR BRACKET, POSITIONING STRAP, AND 240 IN/LB BELT TIGHTENER
AN ATTACHMENT

136-4327 BELT TENSIONER GP

136-4327 BELT TENSIONER GP
S/N 3CS717-6531
INCLUDES ALTERNATOR BRACKET, STIFFENER STRAP, AND UNFLANGED 370 IN/LB BELT TIGHTENER FOR FAN HEIGHT 17 INCH OR OVER
ALSO AN ATTACHMENT

136-4327 BELT TENSIONER GP

136-4327 BELT TENSIONER GP
S/N 3CS6532-UP
INCLUDES ALTERNATOR BRACKET, STIFFENER STRAP, AND UNFLANGED 370 IN/LB BELT TIGHTENER FOR FAN HEIGHT 17 INCH OR OVER
ALSO AN ATTACHMENT

136-4328 BELT TENSIONER GP

136-4328 BELT TENSIONER GP
ALTERNATOR BRACKET,NO STIFFENER STRAP AND 370 IN-LB BELT TIGHTENER FOR FAN HEIGHTS 17 INCHES OR OVER
Type 1
AN ATTACHMENT

136-4328 BELT TENSIONER GP

136-4328 BELT TENSIONER GP
ALTERNATOR BRACKET,NO STIFFENER STRAP AND 370 IN-LB BELT TIGHTENER FOR FAN HEIGHTS 17 INCHES OR OVER
Type 2
AN ATTACHMENT

136-4329 BELT TENSIONER GP

136-4329 BELT TENSIONER GP
S/N 3CS750-6530
INCLUDES ALTERNATOR BRACKET, POSITIONING STRAP, AND UNFLANGED 370IN/LB BELT TIGHTENER FOR FAN HEIGHTS LESS THAN 17 INCH
ALSO AN ATTACHMENT

136-4329 BELT TENSIONER GP

136-4329 BELT TENSIONER GP
S/N 3CS6531-UP
INCLUDES ALTERNATOR BRACKET, POSITIONING STRAP, AND UNFLANGED 370IN/LB BELT TIGHTENER FOR FAN HEIGHTS LESS THAN 17 INCH
ALSO AN ATTACHMENT

136-4330 BELT TENSIONER GP

136-4330 BELT TENSIONER GP
S/N 3CS704-715; 3CS717-6526
ALTERNATOR BRACKET AND UNFLANGED 370 IN-LB BELT TIGHTENER FOR FAN HEIGHT LESS THAN 17 INCHES
ALSO AN ATTACHMENT

136-4330 BELT TENSIONER GP

136-4330 BELT TENSIONER GP
S/N 3CS6527-9637; 3CS29395-UP
ALTERNATOR BRACKET AND UNFLANGED 370 IN-LB BELT TIGHTENER FOR FAN HEIGHT LESS THAN 17 INCHES
ALSO AN ATTACHMENT

142-1989 BELT TENSIONER GP

142-1989 BELT TENSIONER GP
CANNOT BE USED WITH @@@@@117-2694@@@@@, @@@@@128-0325@@@@@
AN ATTACHMENT

142-1991 BELT TENSIONER GP

142-1991 BELT TENSIONER GP
UNFLANGED-370 IN-LB
AN ATTACHMENT

151-2913 BELT TENSIONER GP

151-2913 BELT TENSIONER GP
ALTERNATOR BRACKET, POSITIONING STRAP AND UNFLANGED 370 IN-LB BELT TIGHTENER FOR FAN HEIGHT LESS THAN 17 INCHES
Type 1
AN ATTACHMENT

151-2913 BELT TENSIONER GP

151-2913 BELT TENSIONER GP
ALTERNATOR BRACKET, POSITIONING STRAP AND UNFLANGED 370 IN-LB BELT TIGHTENER FOR FAN HEIGHT LESS THAN 17 INCHES
Type 2
AN ATTACHMENT

157-0064 BELT TENSIONER GP

157-0064 BELT TENSIONER GP
UNIVERSAL FAN DRIVE BRACKET W/ALTERNATOR BRACKET ON LEFT SIDE OF ENGINE
Type 1
FOR USE WITH @@@@@157-0062@@@@@, PIERCE FIRETRUCK CHASSIS
CANNOT BE USED WITH @@@@@138-2539@@@@@
AN ATTACHMENT

157-0064 BELT TENSIONER GP

157-0064 BELT TENSIONER GP
UNIVERSAL FAN DRIVE BRACKET W/ALTERNATOR BRACKET ON LEFT SIDE OF ENGINE
Type 2
FOR USE WITH @@@@@157-0062@@@@@, PIERCE FIRETRUCK CHASSIS
CANNOT BE USED WITH @@@@@138-2539@@@@@
AN ATTACHMENT

173-1440 BELT TENSIONER GP

173-1440 BELT TENSIONER GP
S/N 3CS16599-29190
HYUNDAI
ALSO AN ATTACHMENT

190-3973 BELT TENSIONER GP

190-3973 BELT TENSIONER GP
S/N 3CS21400-24631
PROVIDES PAD MOUNTED ALTERNATOR BRACKET AND UNFLANGED 370IN/LB BELT TIGHTENER
FOR USE WITH FAN CENTER HEIGHTS LESS THAN 17IN
ALSO AN ATTACHMENT

190-3973 BELT TENSIONER GP

190-3973 BELT TENSIONER GP
S/N 3CS24632-24906
PROVIDES PAD MOUNTED ALTERNATOR BRACKET AND UNFLANGED 370IN/LB BELT TIGHTENER
FOR USE WITH FAN CENTER HEIGHTS LESS THAN 17IN
ALSO AN ATTACHMENT

190-3973 BELT TENSIONER GP

190-3973 BELT TENSIONER GP
S/N 3CS24907-29230
PROVIDES PAD MOUNTED ALTERNATOR BRACKET AND UNFLANGED 370IN/LB BELT TIGHTENER
FOR USE WITH FAN CENTER HEIGHTS LESS THAN 17IN
ALSO AN ATTACHMENT

211-7877 BELT TENSIONER GP

211-7877 BELT TENSIONER GP
S/N 3CS24667-29190
PROVIDES AUTOMATIC BELT TIGHTENER AND FRONT MOUNTING PLATE
ALSO AN ATTACHMENT

220-1173 BELT TENSIONER GP

220-1173 BELT TENSIONER GP
S/N 3CS25728-UP
FOR USE WITH FAN CENTERS FROM 11 INCHES TO 20.375 INCHES WHEN ADDITIONAL BELT WRAP IS REQUIRED
ALSO AN ATTACHMENT

132-9809 BELT TIGHTENER GP

132-9809 BELT TIGHTENER GP
S/N 3CS719-24666
MANUAL TENSIONER W/FRONT MOUNTING PLATE
CANNOT BE USED WITH @@@@@117-2694@@@@@, @@@@@128-0325@@@@@
ALSO AN ATTACHMENT

142-2017 MOUNTING GP-BELT TENSIONER

142-2017 MOUNTING GP-BELT TENSIONER
S/N 3CS742-29190
MAGNUM
FOR USE WITH @@@@@142-2016@@@@@, @@@@@136-4327@@@@@
ALSO AN ATTACHMENT

ENGINE BRAKE GP

117-2768 ENGINE BRAKE & MOUNTING GP

117-2768 ENGINE BRAKE & MOUNTING GP
S/N 3CS1-704; 3CS717-UP
12 VOLT
CANNOT BE USED WITH @@@@@116-5408@@@@@
ALSO AN ATTACHMENT

129-2843 ENGINE BRAKE & MOUNTING GP

129-2843 ENGINE BRAKE & MOUNTING GP
24 VOLT
CANNOT BE USED WITH @@@@@116-5408@@@@@
AN ATTACHMENT

148-7497 ENGINE BRAKE GP

148-7497 ENGINE BRAKE GP
12 VOLT
FIELD INSTALLATION

148-7498 ENGINE BRAKE GP

148-7498 ENGINE BRAKE GP
24 VOLT
FIELD INSTALLATION

109-5299 HOUSING GP-ENGINE BRAKE

109-5299 HOUSING GP-ENGINE BRAKE
12 VOLT
PART OF 117-2768 ENGINE BRAKE & MOUNTING GP, 148-7497 ENGINE BRAKE GP
ALSO AN ATTACHMENT

128-0377 HOUSING GP-ENGINE BRAKE

128-0377 HOUSING GP-ENGINE BRAKE
24 VOLT
PART OF 129-2843 ENGINE BRAKE & MOUNTING GP, 148-7498 ENGINE BRAKE GP
AN ATTACHMENT

143-6626 KIT-BRAKE

143-6626 KIT-BRAKE -ENGINE
TUNE-UP KIT FOR COMPRESSION BRAKE
FIELD INSTALLATION

143-6652 CONTROL GP-ENGINE BRAKE

143-6652 CONTROL GP-ENGINE BRAKE
FOR USE WITH JAKE BRAKE
FIELD INSTALLATION

143-6620 SWITCH GP-ENGINE BRAKE

143-6620 SWITCH GP-ENGINE BRAKE
PART OF 143-6652 CONTROL GP-ENGINE BRAKE
FOR USE WITH JAKE BRAKE

143-6632 SWITCH GP-ENGINE BRAKE

143-6632 SWITCH GP-ENGINE BRAKE
PART OF 143-6620 SWITCH GP-ENGINE BRAKE
FOR USE WITH JAKE BRAKE

143-6633 SWITCH GP-ENGINE BRAKE

143-6633 SWITCH GP-ENGINE BRAKE
PART OF 143-6620 SWITCH GP-ENGINE BRAKE
FOR USE WITH JAKE BRAKE

CAMSHAFT GP

131-6668 CAMSHAFT GP

131-6668 CAMSHAFT GP

COMPRESSOR GP-REFRIGERANT

115-9376 MOUNTING GP-REFRIGERANT COMPR

115-9376 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS1-704; 3CS725-UP
STIFFENER
FOR USE WITH CUSTOMER PROVIDED REFRIGERANT COMPRESSOR MOUNTING BRACKETS
ALSO AN ATTACHMENT

116-5439 MOUNTING GP-REFRIGERANT COMPR

116-5439 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS705-715; 3CS717-UP
FOR USE WITH ROTARY REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT

124-2646 MOUNTING GP-REFRIGERANT COMPR

124-2646 MOUNTING GP-REFRIGERANT COMPR
FOR ROTARY REFRIGERANT COMPRESSOR
FOR USE WITH @@@@@138-2546@@@@@, @@@@@138-2545@@@@@, @@@@@124-2650@@@@@
ALSO AN ATTACHMENT

132-9840 MOUNTING GP-REFRIGERANT COMPR

132-9840 MOUNTING GP-REFRIGERANT COMPR
FOR USE WITH 4 CYL AIR COMPRESSOR
AN ATTACHMENT

132-9842 MOUNTING GP-REFRIGERANT COMPR

132-9842 MOUNTING GP-REFRIGERANT COMPR
FOR USE WITH 4 CYL AIR COMPRESSOR
AN ATTACHMENT

132-9843 MOUNTING GP-REFRIGERANT COMPR

132-9843 MOUNTING GP-REFRIGERANT COMPR
PROVIDES HOLES FOR RESERVOIR MTG.
FOR USE WITH 4 CYL AIR COMPRESSOR
AN ATTACHMENT

132-9847 MOUNTING GP-REFRIGERANT COMPR

132-9847 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS2169-30296
PROVIDES HOLES FOR RESERVOIR MTG.
FOR USE WITH 4 CYL AIR COMPRESSOR
ALSO AN ATTACHMENT

136-4337 MOUNTING GP-REFRIGERANT COMPR

136-4337 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS704-704; 3CS717-2433; 3CS6134-29230; 3CS29292-UP
PROVIDES UNIVERSAL FAN DRIVE MOUNTING BRACKET WITH REFRIGERANT COMPRESSOR MOUNTING SUPPORT HOLES, (POLY-VEE DRIVE)
FOR USE WITH @@@@@124-2650@@@@@, @@@@@132-9842@@@@@, @@@@@132-9847@@@@@
CANNOT BE USED WITH @@@@@138-2539@@@@@
ALSO AN ATTACHMENT

136-4338 MOUNTING GP-REFRIGERANT COMPR

136-4338 MOUNTING GP-REFRIGERANT COMPR
PROVIDES UNIVERSAL FAN DRIVE MOUNTING BRACKET WITH REFRIGERANT COMPRESSOR MOUNTING SUPPORT HOLES (VEE-BELT DRIVE)
FOR USE WITH @@@@@124-2650@@@@@, @@@@@132-9842@@@@@, @@@@@132-9847@@@@@
CANNOT BE USED WITH @@@@@138-2539@@@@@
AN ATTACHMENT

136-4341 MOUNTING GP-REFRIGERANT COMPR

136-4341 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS28758-29190
PROVIDES UNIVERSAL FAN DRIVE MOUNTING BRACKET WITH ROTARY REFRIGERANT COMPRESSOR MOUNTING SUPPORT HOLES, (POLY-VEE DRIVE WITH 225 IN/LB BELT TIGHTENER)
FOR USE WITH @@@@@124-2650@@@@@, @@@@@132-9842@@@@@, @@@@@132-9847@@@@@, 12IN OR 13IN FAN CENTER HEIGHTS AND ROTARY REFRIGERANT COMPRESSOR
CANNOT BE USED WITH @@@@@138-2539@@@@@
ALSO AN ATTACHMENT

138-2597 MOUNTING GP-REFRIGERANT COMPR

138-2597 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS717-29230; 3CS29317-UP
PROVIDES ADDITIONAL MOUNTING SPACER FOR REFRIGERANT COMPRESSOR
FOR USE WITH @@@@@136-4337@@@@@, @@@@@136-4338@@@@@
ALSO AN ATTACHMENT

142-2016 MOUNTING GP-REFRIGERANT COMPR

142-2016 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS742-18623
FOR USE WITH @@@@@142-2017@@@@@, @@@@@138-2546@@@@@, FIXED CENTER REFRIGERANT COMPRESSOR WITH POLY-VEE BELT, SPRING LOADED BELT TENSIONER
ALSO AN ATTACHMENT

148-1986 MOUNTING GP-REFRIGERANT COMPR

148-1986 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS732-UP
FOR USE WITH @@@@@128-0325@@@@@, @@@@@142-2017@@@@@, @@@@@117-2694@@@@@, @@@@@138-2546@@@@@, FIXED CENTER REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT

157-0062 MOUNTING GP-REFRIGERANT COMPR

157-0062 MOUNTING GP-REFRIGERANT COMPR
REFRIGERANT COMPRESSOR-RIGHT SIDE OF ENGINE
FOR USE WITH @@@@@157-0064@@@@@, @@@@@183-5893@@@@@, PIERCE FIRETRUCK CHASSIS
CANNOT BE USED WITH @@@@@117-2788@@@@@, @@@@@136-4288@@@@@, @@@@@136-4290@@@@@
AN ATTACHMENT

157-0110 MOUNTING GP-REFRIGERANT COMPR

157-0110 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS6042-18374
PROVIDES SUPPORT FOR CUSTOMER PROVIDED REFRIGERANT COMPRESSOR MOUNTING BRACKETS AND HOLES FOR RESERVOIR MOUNTING
FOR USE WITH @@@@@117-2694@@@@@, @@@@@128-0325@@@@@, 4 CYLINDER AIR COMPRESSOR
ALSO AN ATTACHMENT

166-6364 MOUNTING GP-REFRIGERANT COMPR

166-6364 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS748-29230; 3CS29296-UP
PROVIDES UNIVERSAL FAN DRIVE MOUNTING BRACKET WITH REFRIGERANT COMPRESSOR MOUNT SUPPORT HOLES, (POLY-VEE DRIVE)
FOR USE WITH @@@@@124-2650@@@@@, @@@@@132-9842@@@@@, @@@@@132-9847@@@@@, 15IN OR 20IN FAN HEIGHTS
CANNOT BE USED WITH @@@@@138-2539@@@@@
ALSO AN ATTACHMENT

188-7271 MOUNTING GP-REFRIGERANT COMPR

188-7271 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS14384-29190; 3CS29309-UP
PROVIDES UNIVERSAL FAN DRIVE MOUNTING WITH ROTARY REFRIGERANT COMPRESSOR MOUNTING SUPPORT HOLES, (POLY-VEE DRIVE WITH 225 IN/LB BELT TENSIONER
FOR USE WITH @@@@@124-2650@@@@@, 17IN OR 18IN FAN CENTER HEIGHT AND ROTARY REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT

207-8086 MOUNTING GP-REFRIGERANT COMPR

207-8086 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS25728-29190; 3CS29231-29337
FOR USE WITH @@@@@124-2650@@@@@, @@@@@138-2546@@@@@, 19 INCH FAN CENTER HTS. AND ROTARY COMPRESSOR
CANNOT BE USED WITH @@@@@138-2539@@@@@
ALSO AN ATTACHMENT

207-8088 MOUNTING GP-REFRIGERANT COMPR

207-8088 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS29234-UP
PROVIDES UNIVERSAL FAN DRIVE MTG BRACKET W/REFRIGERANT COMPRESSOR MOUNTING SUPPORT HOLES
FOR USE WITH 20 AND 20.375 IN FAN CENTER HEIGHTS, AND ROTARY COMPRESSOR
CANNOT BE USED WITH @@@@@138-2539@@@@@
ALSO AN ATTACHMENT

207-8095 MOUNTING GP-REFRIGERANT COMPR

207-8095 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS25728-UP
PROVIDES UNIVERSAL FAN DRIVE MOUNTING BRACKET WITH ROTARY REFRIGERANT COMPRESSOR MOUNTING SUPPORT HOLES, (POLY-VEE DRIVE WITH 225 IN/LB BELT TENSIONER
FOR USE WITH @@@@@124-2650@@@@@, @@@@@138-2546@@@@@, 11IN FAN CENTER HEIGHT AND ROTARY REFRIGERANT COMPRESSOR
CANNOT BE USED WITH @@@@@138-2539@@@@@
ALSO AN ATTACHMENT

207-8119 MOUNTING GP-REFRIGERANT COMPR

207-8119 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS24997-UP
PROVIDES ADDITIONAL MOUNTING SPACER
FOR USE WITH @@@@@136-4337@@@@@, @@@@@136-4338@@@@@, @@@@@136-4341@@@@@, @@@@@207-8088@@@@@, @@@@@207-8093@@@@@, @@@@@207-8095@@@@@

211-7881 MOUNTING GP-REFRIGERANT COMPR

211-7881 MOUNTING GP-REFRIGERANT COMPR
S/N 3CS18624-29190
PROVIDES SUPPORT AND MOUNTING BRACKETS FOR CUSTOMER PROVIDED FIXED CENTER ROTARY REFRIGERANT COMPRESSOR
FOR USE WITH @@@@@142-2017@@@@@, @@@@@138-2546@@@@@

CRANKSHAFT GP

132-3210 CRANKSHAFT GP

132-3210 CRANKSHAFT GP
S/N 3CS1-11999

132-3210 CRANKSHAFT GP

132-3210 CRANKSHAFT GP
S/N 3CS12000-UP

169-4188 CRANKSHAFT GP

169-4188 CRANKSHAFT GP
AN ATTACHMENT

116-1091 SEAL GP-CRANKSHAFT

116-1091 SEAL GP-CRANKSHAFT
S/N 3CS1-715; 3CS717-UP
REAR
CANNOT BE USED WITH @@@@@117-2769@@@@@
ALSO AN ATTACHMENT

124-2661 SEAL GP-CRANKSHAFT

124-2661 SEAL GP-CRANKSHAFT -DOUBLE LIP
S/N 3CS992-29190; 3CS29320-29528
FOR USE WITH WET FLYWHEEL
CANNOT BE USED WITH @@@@@117-2769@@@@@, @@@@@117-2775@@@@@
ALSO AN ATTACHMENT

CYLINDER BLOCK GP

115-2985 COVER GP-CYLINDER BLOCK

115-2985 COVER GP-CYLINDER BLOCK
FOR USE WITH @@@@@117-2787@@@@@, @@@@@117-2786@@@@@, SPIN ON PAPER BYPASS FILTER OR WHEN NO BYPASS FILTER IS USED
ALSO AN ATTACHMENT

132-9807 COVER GP-CYLINDER BLOCK

132-9807 COVER GP-CYLINDER BLOCK
FOR USE WITH @@@@@117-2786@@@@@, @@@@@117-2787@@@@@
AN ATTACHMENT

128-0407 CYLINDER BLOCK AS

128-0407 CYLINDER BLOCK AS
S/N 3CS717-723
PART OF 144-2958 CYLINDER BLOCK AS

132-3207 CYLINDER BLOCK AS

132-3207 CYLINDER BLOCK AS
S/N 3CS1-716
PART OF 130-0876 CYLINDER BLOCK GP

144-2958 CYLINDER BLOCK AS

144-2958 CYLINDER BLOCK AS
S/N 3CS717-723
PART OF 115-2982 CYLINDER BLOCK GP

148-2062 CYLINDER BLOCK AS

148-2062 CYLINDER BLOCK AS
S/N 3CS724-21950
PART OF 148-2095 CYLINDER BLOCK AS

148-2095 CYLINDER BLOCK AS

148-2095 CYLINDER BLOCK AS
S/N 3CS724-21950
PART OF 115-2982 CYLINDER BLOCK GP

200-2054 CYLINDER BLOCK AS

200-2054 CYLINDER BLOCK AS
S/N 3CS21951-UP
PART OF 204-3450, 520-4957 CYLINDER BLOCK AS

204-3450 CYLINDER BLOCK AS

204-3450 CYLINDER BLOCK AS
S/N 3CS21951-UP
PART OF 115-2982 CYLINDER BLOCK GP

520-4957 CYLINDER BLOCK AS

520-4957 CYLINDER BLOCK AS
S/N 3CS21951-UP
PART OF 115-2982 CYLINDER BLOCK GP

115-2982 CYLINDER BLOCK GP

115-2982 CYLINDER BLOCK GP
S/N 3CS717-723

115-2982 CYLINDER BLOCK GP

115-2982 CYLINDER BLOCK GP
S/N 3CS724-21950

115-2982 CYLINDER BLOCK GP

115-2982 CYLINDER BLOCK GP
S/N 3CS21951-UP
Type 1

115-2982 CYLINDER BLOCK GP

115-2982 CYLINDER BLOCK GP
S/N 3CS21951-UP
Type 2

130-0876 CYLINDER BLOCK GP

130-0876 CYLINDER BLOCK GP
S/N 3CS1-716

115-2984 PLUG GP-CYLINDER BLOCK

115-2984 PLUG GP-CYLINDER BLOCK
PROVIDES PORT PLUGS FOR THE RIGHT HAND OIL GALLERY
ALSO AN ATTACHMENT

116-5451 PLUG GP-CYLINDER BLOCK

116-5451 PLUG GP-CYLINDER BLOCK
S/N 3CS725-UP
PROVIDES ADAPTER WITH PLUGS FOR RIGHT HAND SIDE OF OIL GALLERY
ALSO AN ATTACHMENT

117-0164 PLUG GP-CYLINDER BLOCK

117-0164 PLUG GP-CYLINDER BLOCK
CANNOT BE USED WITH OIL GAUGE
ALSO AN ATTACHMENT

117-0165 PLUG GP-CYLINDER BLOCK

117-0165 PLUG GP-CYLINDER BLOCK -OIL GALLERY, END
S/N 3CS1-715; 3CS717-UP
CANNOT BE USED WITH @@@@@117-2769@@@@@
ALSO AN ATTACHMENT

117-0185 PLUG GP-CYLINDER BLOCK

117-0185 PLUG GP-CYLINDER BLOCK
PROVIDES PLUG FOR 4 CYLINDER AIR COMPRESSOR DRAIN
FOR USE WITH @@@@@117-2791@@@@@, TWO CYLINDER AIR COMPRESSOR
ALSO AN ATTACHMENT

138-2028 PLUG GP-CYLINDER BLOCK

138-2028 PLUG GP-CYLINDER BLOCK
USE WHEN DIPSTICK IS NOT REQUIRED

117-0178 PLUG GP-ENGINE

117-0178 PLUG GP-ENGINE -REAR CRANKSHAFT
S/N 3CS750-UP
PROVIDES PLUGS FOR REAR CRANKSHAFT FLANGE WHEN ENGINE BUILT WITHOUT FLYWHEEL
CANNOT BE USED WITH @@@@@117-2769@@@@@, FLYWHEEL
ALSO AN ATTACHMENT

CYLINDER HEAD GP

132-3251 CYLINDER HEAD AS

132-3251 CYLINDER HEAD AS
S/N 3CS701-714
PART OF 133-7052 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@138-2007@@@@@

133-7056 CYLINDER HEAD AS

133-7056 CYLINDER HEAD AS
S/N 3CS1-700
PART OF 133-7052 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@138-2007@@@@@

138-1995 CYLINDER HEAD AS

138-1995 CYLINDER HEAD AS
S/N 3CS715-716
PART OF 138-2007 CYLINDER HEAD AS, 133-7052 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@138-2007@@@@@

138-2007 CYLINDER HEAD AS

138-2007 CYLINDER HEAD AS
S/N 3CS1-716
FIELD REPLACEMENT FOR @@@@@133-7056@@@@@, @@@@@138-1995@@@@@, @@@@@132-3251@@@@@

148-2145 CYLINDER HEAD AS

148-2145 CYLINDER HEAD AS
S/N 3CS717-13910
PART OF 148-2144 CYLINDER HEAD GP

179-9458 CYLINDER HEAD AS

179-9458 CYLINDER HEAD AS
S/N 3CS13911-UP
PART OF 179-9461 CYLINDER HEAD AS, 148-2144 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@179-9461@@@@@

179-9461 CYLINDER HEAD AS

179-9461 CYLINDER HEAD AS
S/N 3CS13911-UP
FIELD REPLACEMENT FOR @@@@@179-9458@@@@@

132-3208 CYLINDER HEAD GP

132-3208 CYLINDER HEAD GP
S/N 3CS1-716

132-3208 CYLINDER HEAD GP

132-3208 CYLINDER HEAD GP
S/N 3CS717-UP

133-7052 CYLINDER HEAD GP

133-7052 CYLINDER HEAD GP
S/N 3CS1-700
PART OF 132-3208 CYLINDER HEAD GP

133-7052 CYLINDER HEAD GP

133-7052 CYLINDER HEAD GP
S/N 3CS701-714
PART OF 132-3208 CYLINDER HEAD GP

133-7052 CYLINDER HEAD GP

133-7052 CYLINDER HEAD GP
S/N 3CS715-716
PART OF 132-3208 CYLINDER HEAD GP

148-2144 CYLINDER HEAD GP

148-2144 CYLINDER HEAD GP
S/N 3CS717-13910
PART OF 132-3208 CYLINDER HEAD GP

148-2144 CYLINDER HEAD GP

148-2144 CYLINDER HEAD GP
S/N 3CS13911-UP
PART OF 132-3208 CYLINDER HEAD GP

107-5792 FASTENER GP-CYLINDER HEAD

107-5792 FASTENER GP-CYLINDER HEAD
PART OF 117-2768, 129-2843 ENGINE BRAKE & MOUNTING GP
ALSO AN ATTACHMENT

116-1083 FASTENER GP-CYLINDER HEAD

116-1083 FASTENER GP-CYLINDER HEAD
PART OF 116-5408 MOUNTING GP-VALVE MECHANISM
ALSO AN ATTACHMENT

417-4374 KIT-CYLINDER HEAD GASKET

417-4374 KIT-CYLINDER HEAD GASKET
S/N 3CS717-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FIELD REPLACEMENT FOR @@@@@316-4396@@@@@

117-0178 PLUG GP-ENGINE

DAMPER GP

117-2766 DAMPER GP

117-2766 DAMPER GP
PROVIDES A VISCONIC DAMPER, ADAPTER AND FASTENING HARDWARE TO ATTACH THE DAMPER TO THE ADAPTER.
FOR USE WITH @@@@@110-5115@@@@@, @@@@@180-5168@@@@@
ALSO AN ATTACHMENT

141-5089 DAMPER GP

141-5089 DAMPER GP
S/N 3CS719-UP

117-2771 FASTENER GP-DAMPER & PULLEY

117-2771 FASTENER GP-DAMPER & PULLEY
S/N 3CS1-715; 3CS717-19784
FOR USE WITH @@@@@116-5444@@@@@, @@@@@117-2795@@@@@
CANNOT BE USED WITH @@@@@110-5115@@@@@, @@@@@117-2770@@@@@, @@@@@122-0762@@@@@, @@@@@123-0817@@@@@, @@@@@129-2907@@@@@, @@@@@155-7898@@@@@, @@@@@157-0068@@@@@, @@@@@187-3321@@@@@, @@@@@197-9563@@@@@
ALSO AN ATTACHMENT

117-2771 FASTENER GP-DAMPER & PULLEY

117-2771 FASTENER GP-DAMPER & PULLEY
S/N 3CS19785-UP
FOR USE WITH @@@@@116-5444@@@@@, @@@@@117-2795@@@@@
CANNOT BE USED WITH @@@@@110-5115@@@@@, @@@@@117-2770@@@@@, @@@@@122-0762@@@@@, @@@@@123-0817@@@@@, @@@@@129-2907@@@@@, @@@@@155-7898@@@@@, @@@@@157-0068@@@@@, @@@@@187-3321@@@@@, @@@@@197-9563@@@@@
ALSO AN ATTACHMENT

180-5168 FASTENER GP-DAMPER & PULLEY

180-5168 FASTENER GP-DAMPER & PULLEY
S/N 3CS18442-29190; 3CS29309-UP
FOR USE WITH @@@@@187-3321@@@@@, @@@@@155-7898@@@@@, @@@@@122-0761@@@@@, @@@@@110-5115@@@@@, @@@@@122-0762@@@@@, CAST IRON CRANKSHAFT PULLEYS
CANNOT BE USED WITH @@@@@117-2795@@@@@, @@@@@116-5444@@@@@, @@@@@117-2770@@@@@, @@@@@129-2907@@@@@, @@@@@197-9562@@@@@, @@@@@197-9563@@@@@, @@@@@157-0068@@@@@
ALSO AN ATTACHMENT

DRIVE GP-AUXILIARY

117-2770 ADAPTER GP-AUXILIARY DRIVE

117-2770 ADAPTER GP-AUXILIARY DRIVE
S/N 3CS733-19784
FOR USE WITH @@@@@117-2766@@@@@, @@@@@116-5444@@@@@, @@@@@117-2795@@@@@, @@@@@122-0762@@@@@, CUSTOMER SUPPLIED PTO FLANGE
CANNOT BE USED WITH @@@@@117-2771@@@@@, @@@@@180-5168@@@@@, @@@@@123-0817@@@@@, @@@@@157-0068@@@@@, @@@@@187-3321@@@@@
ALSO AN ATTACHMENT

117-2770 ADAPTER GP-AUXILIARY DRIVE

117-2770 ADAPTER GP-AUXILIARY DRIVE
S/N 3CS19785-UP
FOR USE WITH @@@@@117-2766@@@@@, @@@@@116-5444@@@@@, @@@@@117-2795@@@@@, @@@@@122-0762@@@@@, CUSTOMER SUPPLIED PTO FLANGE
CANNOT BE USED WITH @@@@@117-2771@@@@@, @@@@@180-5168@@@@@, @@@@@123-0817@@@@@, @@@@@157-0068@@@@@, @@@@@187-3321@@@@@
ALSO AN ATTACHMENT

129-2907 ADAPTER GP-AUXILIARY DRIVE

129-2907 ADAPTER GP-AUXILIARY DRIVE
S/N 3CS1-19784
FRONT PTO
FOR USE WITH @@@@@116-5444@@@@@, @@@@@117-2766@@@@@, @@@@@117-2795@@@@@, CUSTOMER SUPPLIED PTO FLANGE AND
CANNOT BE USED WITH @@@@@117-2771@@@@@, @@@@@180-5168@@@@@, @@@@@157-0068@@@@@
AN ATTACHMENT

129-2907 ADAPTER GP-AUXILIARY DRIVE

129-2907 ADAPTER GP-AUXILIARY DRIVE
S/N 3CS19785-UP
FRONT PTO
FOR USE WITH @@@@@116-5444@@@@@, @@@@@117-2766@@@@@, @@@@@117-2795@@@@@, CUSTOMER SUPPLIED PTO FLANGE AND
CANNOT BE USED WITH @@@@@117-2771@@@@@, @@@@@180-5168@@@@@, @@@@@157-0068@@@@@
AN ATTACHMENT

197-9562 ADAPTER GP-AUXILIARY DRIVE

197-9562 ADAPTER GP-AUXILIARY DRIVE
S/N 3CS18442-29190; 3CS29309-UP
FRONT PTO
FOR USE WITH @@@@@117-2766@@@@@, @@@@@122-0762@@@@@, @@@@@187-3321@@@@@, CUSTOMER SUPPLIED PTO FLANGES AND
CANNOT BE USED WITH @@@@@117-2771@@@@@, @@@@@180-5168@@@@@, @@@@@117-2795@@@@@, @@@@@116-5444@@@@@, @@@@@123-0817@@@@@, @@@@@157-0068@@@@@
ALSO AN ATTACHMENT

197-9563 ADAPTER GP-AUXILIARY DRIVE

197-9563 ADAPTER GP-AUXILIARY DRIVE
FRONT PTO
FOR USE WITH @@@@@117-2766@@@@@
CANNOT BE USED WITH @@@@@117-2771@@@@@, @@@@@180-5168@@@@@, @@@@@116-5444@@@@@, @@@@@117-2795@@@@@
AN ATTACHMENT

DRIVE GP-FAN

117-2694 MOUNTING GP-FAN DRIVE

117-2694 MOUNTING GP-FAN DRIVE
S/N 3CS732-UP
FOR FAN TO CRANK HEIGHTS OF 279.4MM, 330.2MM, 406.4MM, 457.2MM, 508MM - SIDE "B" OUT
ALSO AN ATTACHMENT

128-0325 MOUNTING GP-FAN DRIVE

128-0325 MOUNTING GP-FAN DRIVE
S/N 3CS744-29190
FOR FAN TO CRANK HEIGHTS OF 254MM, 304.8MM, 355.6MM, 381MM, 431.8MM, 482.6MM, 533.4MM, SIDE "A" OUT
ALSO AN ATTACHMENT

138-2550 MOUNTING GP-FAN DRIVE

138-2550 MOUNTING GP-FAN DRIVE
S/N 3CS719-UP
ALSO AN ATTACHMENT

138-2551 MOUNTING GP-FAN DRIVE

138-2551 MOUNTING GP-FAN DRIVE
ADAPTABLE TO MULTIPLE FAN MOUNTING STUDS
ALSO AN ATTACHMENT

207-8093 MOUNTING GP-FAN DRIVE

207-8093 MOUNTING GP-FAN DRIVE
PROVIDES UNIVERSAL FAN DRIVE MOUNTING WITH ROTARY REFRIGERANT COMPRESSOR MOUNTING SUPPORT HOLES, (POLY-VEE DRIVE WITH 225 IN/LB BELT TENSIONER)
FOR USE WITH @@@@@124-2650@@@@@, @@@@@138-2546@@@@@, 15IN FAN CENTER HEIGHT AND ROTARY REFRIGERANT COMPRESSOR
CANNOT BE USED WITH @@@@@138-2539@@@@@
AN ATTACHMENT

117-0177 PULLEY GP-FAN & ALT DRIVE

117-0177 PULLEY GP-FAN & ALT DRIVE
S/N 3CS732-UP
3.34:1 DRIVE RATIO. 68.5 MM (2.9 IN) DIAMETER, 8 GROOVE
FOR USE WITH @@@@@116-5444@@@@@, 22.19 MM (0.87 IN) DIAMETER ALTERNATOR SHAFT WITH OR WITHOUT KEY, 228.5 MM (9.0 IN) DIAMETER CRANKSHAFT PULLEY
CANNOT BE USED WITH @@@@@117-2795@@@@@, @@@@@122-0762@@@@@, @@@@@123-0817@@@@@
ALSO AN ATTACHMENT

FLYWHEEL GP

117-0176 ADAPTER GP-ENGINE TO XMSN

117-0206 ADAPTER GP-ENGINE TO XMSN

117-0206 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@118-0444@@@@@
CANNOT BE USED WITH @@@@@117-2769@@@@@, @@@@@117-2794@@@@@, REAR POWER TAKE-OFF
AN ATTACHMENT

117-0207 ADAPTER GP-ENGINE TO XMSN

117-0207 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@118-0444@@@@@, @@@@@117-2769@@@@@
CANNOT BE USED WITH @@@@@117-2793@@@@@
AN ATTACHMENT

117-0208 ADAPTER GP-ENGINE TO XMSN

117-0208 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@117-2769@@@@@, @@@@@118-0444@@@@@, @@@@@117-2766@@@@@
CANNOT BE USED WITH @@@@@117-2793@@@@@
AN ATTACHMENT

124-2665 ADAPTER GP-ENGINE TO XMSN

142-2024 ADAPTER GP-ENGINE TO XMSN

142-2024 ADAPTER GP-ENGINE TO XMSN
S/N 3CS5587-29230
FOR USE WITH @@@@@117-2766@@@@@, @@@@@118-0444@@@@@, @@@@@117-2769@@@@@
CANNOT BE USED WITH @@@@@117-2793@@@@@
ALSO AN ATTACHMENT

117-2793 FASTENER GP-FLYWHEEL

117-2793 FASTENER GP-FLYWHEEL
FOR USE WITH @@@@@117-2774@@@@@, @@@@@117-2769@@@@@, @@@@@123-0815@@@@@
CANNOT BE USED WITH @@@@@117-0207@@@@@, @@@@@117-0208@@@@@, @@@@@142-2024@@@@@
ALSO AN ATTACHMENT

117-2794 FASTENER GP-FLYWHEEL

117-2794 FASTENER GP-FLYWHEEL
S/N 3CS1-715; 3CS717-UP
FOR USE WITH @@@@@117-2774@@@@@
CANNOT BE USED WITH @@@@@117-2769@@@@@, @@@@@117-0206@@@@@, @@@@@117-0176@@@@@, @@@@@124-2665@@@@@, GEAR GP-REAR (RPTO)
ALSO AN ATTACHMENT

126-0177 FASTENER GP-FLYWHEEL

126-0177 FASTENER GP-FLYWHEEL
S/N 3CS2580-30296
FOR USE WITH @@@@@117-2769@@@@@, REAR PTO ENGINES WITHOUT A FLYWHEEL OR ADAPTER GP
CANNOT BE USED WITH FLYWHEEL GP, HOUSING GP-FLYWHEEL, ADAPTER GP
ALSO AN ATTACHMENT

216-8573 FASTENER GP-FLYWHEEL

216-8573 FASTENER GP-FLYWHEEL
CANNOT BE USED WITH @@@@@117-2769@@@@@, @@@@@117-0206@@@@@, @@@@@117-0176@@@@@, @@@@@124-2665@@@@@, FLYWHEEL OR FLYWHEEL ADAPTER
AN ATTACHMENT

117-2774 FLYWHEEL GP

117-2774 FLYWHEEL GP
S/N 3CS719-29190
394-MM (15.5-INCH). FLAT
FOR USE WITH @@@@@117-2793@@@@@, @@@@@117-2794@@@@@
ALSO AN ATTACHMENT

123-0815 FLYWHEEL GP

123-0815 FLYWHEEL GP
394-MM (15.5-INCH). FLAT
FOR USE WITH @@@@@117-2793@@@@@, @@@@@117-2794@@@@@, 7-SPRING CLUTCH
ALSO AN ATTACHMENT

123-0816 FLYWHEEL GP

123-0816 FLYWHEEL GP
S/N 3CS731-29190
356-MM (14-INCH)
FOR USE WITH @@@@@117-2794@@@@@, @@@@@117-2793@@@@@
ALSO AN ATTACHMENT

200-2260 FLYWHEEL GP

200-2260 FLYWHEEL GP
S/N 3CS24424-29230
432-MM (17-INCH) SINGLE PLATE CLUTCH
FOR USE WITH @@@@@117-2793@@@@@, @@@@@117-2794@@@@@
ALSO AN ATTACHMENT

117-2769 GEAR GP-REAR

117-2769 GEAR GP-REAR
S/N 3CS1-29198
1.3:1 OUTPUT RATIO
FOR USE WITH @@@@@117-2793@@@@@, @@@@@126-0177@@@@@, SAE NO.1 FLYWHEEL HOUSING
CANNOT BE USED WITH @@@@@117-0176@@@@@, @@@@@117-0206@@@@@, @@@@@124-2665@@@@@, @@@@@117-0178@@@@@, @@@@@117-0165@@@@@, @@@@@116-1091@@@@@, @@@@@124-2661@@@@@
ALSO AN ATTACHMENT

117-2769 GEAR GP-REAR

117-2769 GEAR GP-REAR
S/N 3CS29199-29230; 3CS29239-UP
1.3:1 OUTPUT RATIO
FOR USE WITH @@@@@117-2793@@@@@, @@@@@126-0177@@@@@, SAE NO.1 FLYWHEEL HOUSING
CANNOT BE USED WITH @@@@@117-0176@@@@@, @@@@@117-0206@@@@@, @@@@@124-2665@@@@@, @@@@@117-0178@@@@@, @@@@@117-0165@@@@@, @@@@@116-1091@@@@@, @@@@@124-2661@@@@@
ALSO AN ATTACHMENT

GEAR GP

117-2750 GEAR GP-FRONT

117-2750 GEAR GP-FRONT
S/N 3CS1-714

117-2750 GEAR GP-FRONT

117-2750 GEAR GP-FRONT
S/N 3CS715-UP

117-2769 GEAR GP-REAR

133-7075 HOUSING GP-FRONT

133-7075 HOUSING GP-FRONT
S/N 3CS1-5800

133-7075 HOUSING GP-FRONT

133-7075 HOUSING GP-FRONT
S/N 3CS5801-11999

133-7075 HOUSING GP-FRONT

133-7075 HOUSING GP-FRONT
S/N 3CS12000-UP

HOUSING GP-FLYWHEEL

117-0176 ADAPTER GP-ENGINE TO XMSN

117-0206 ADAPTER GP-ENGINE TO XMSN

117-0206 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@118-0444@@@@@
CANNOT BE USED WITH @@@@@117-2769@@@@@, @@@@@117-2794@@@@@, REAR POWER TAKE-OFF
AN ATTACHMENT

117-0207 ADAPTER GP-ENGINE TO XMSN

117-0207 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@118-0444@@@@@, @@@@@117-2769@@@@@
CANNOT BE USED WITH @@@@@117-2793@@@@@
AN ATTACHMENT

117-0208 ADAPTER GP-ENGINE TO XMSN

117-0208 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@117-2769@@@@@, @@@@@118-0444@@@@@, @@@@@117-2766@@@@@
CANNOT BE USED WITH @@@@@117-2793@@@@@
AN ATTACHMENT

124-2665 ADAPTER GP-ENGINE TO XMSN

142-2024 ADAPTER GP-ENGINE TO XMSN

142-2024 ADAPTER GP-ENGINE TO XMSN
S/N 3CS5587-29230
FOR USE WITH @@@@@117-2766@@@@@, @@@@@118-0444@@@@@, @@@@@117-2769@@@@@
CANNOT BE USED WITH @@@@@117-2793@@@@@
ALSO AN ATTACHMENT

133-1209 COVER GP-FLYWHEEL HOUSING

133-1209 COVER GP-FLYWHEEL HOUSING
RIGHT STARTER BORE
Type 1
CANNOT BE USED WITH ELECTRIC STARTING MOTORS
AN ATTACHMENT

133-1209 COVER GP-FLYWHEEL HOUSING

133-1209 COVER GP-FLYWHEEL HOUSING
RIGHT STARTER BORE
Type 2
CANNOT BE USED WITH ELECTRIC STARTING MOTORS
AN ATTACHMENT

117-2747 FLANGE GP-OUTPUT SHAFT

117-2747 FLANGE GP-OUTPUT SHAFT
FOR USE WITH @@@@@117-2769@@@@@, CUSTOMER SUPPLIED PTO FLANGE
ALSO AN ATTACHMENT

117-2775 HOUSING GP-FLYWHEEL

117-2775 HOUSING GP-FLYWHEEL
S/N 3CS1-715; 3CS717-UP
SAE NO.1-ENGINE INSTALLATION ANGLE VERTICAL
CANNOT BE USED WITH @@@@@124-2661@@@@@
ALSO AN ATTACHMENT

124-2660 HOUSING GP-FLYWHEEL

124-2660 HOUSING GP-FLYWHEEL
S/N 3CS733-29670
SAE NO. 1 FLYWHEEL HOUSING, VERTICAL ENGINE INSTALLATION ANGLE
FOR USE WITH @@@@@117-2766@@@@@, WET TRANSMISSION
ALSO AN ATTACHMENT

148-2014 HOUSING GP-FLYWHEEL

148-2014 HOUSING GP-FLYWHEEL
SAE NO. 1-5 DEGREE COUNTERCLOCKWISE ENGINE INSTALLATION
CANNOT BE USED WITH @@@@@124-2661@@@@@
AN ATTACHMENT

157-0104 HOUSING GP-FLYWHEEL

157-0104 HOUSING GP-FLYWHEEL
S/N 3CS25728-UP
PETERBILT-SAE #1-ENGINE INSTALLATION ANGLE IS VERTICAL
CANNOT BE USED WITH @@@@@124-2661@@@@@
ALSO AN ATTACHMENT

9Y-7285 HOUSING GP-FLYWHEEL

9Y-7285 HOUSING GP-FLYWHEEL
FOR USE WITH 12 DEGREE INSTALLATIONS
AN ATTACHMENT

HOUSING GP-FRONT

124-2650 BRACKET GP-SUPPORT

124-2650 BRACKET GP-SUPPORT -REFRIGERANT COMPRESSOR
S/N 3CS704-704; 3CS717-UP
FOR USE WITH @@@@@138-2539@@@@@
ALSO AN ATTACHMENT

138-2545 BRACKET GP-SUPPORT

138-2545 BRACKET GP-SUPPORT -REFRIGERANT COMPRESSOR
PROVIDES "L" BRACKET FOR STIFFENING, WITH RADIATOR SUPPORT HOLES-PETERBILT
ALSO AN ATTACHMENT

138-2546 BRACKET GP-SUPPORT

138-2546 BRACKET GP-SUPPORT -REFRIGERANT COMPRESSOR
S/N 3CS725-UP
PROVIDES 2 BOLTS FOR FRONT HOUSING TO "L" BRACKET HOLES
FOR USE WITH @@@@@124-2650@@@@@, @@@@@132-9842@@@@@, @@@@@132-9847@@@@@, @@@@@124-2646@@@@@, @@@@@142-2016@@@@@, @@@@@148-1986@@@@@
ALSO AN ATTACHMENT

113-8987 COVER GP-FRONT HOUSING

113-8987 COVER GP-FRONT HOUSING
POWER TAKE-OFF

122-0761 COVER GP-FRONT HOUSING

122-0761 COVER GP-FRONT HOUSING
CANNOT BE USED WITH OIL FILLER
ALSO AN ATTACHMENT

117-2773 FASTENER GP-FRONT HOUSING

117-2773 FASTENER GP-FRONT HOUSING
S/N 3CS719-UP
FOR THE LOWER HOUSING BLOCK JOINT WHEN NO FRONT SUPPORT IS PROVIDED
CANNOT BE USED WITH @@@@@115-3004@@@@@, @@@@@126-0175@@@@@, @@@@@129-2910@@@@@, @@@@@130-0900@@@@@, @@@@@130-0901@@@@@, @@@@@138-2591@@@@@
ALSO AN ATTACHMENT

138-2539 FASTENER GP-FRONT HOUSING

138-2539 FASTENER GP-FRONT HOUSING
S/N 3CS719-UP
FOR USE WITH @@@@@124-2650@@@@@, REFRIGERANT COMPRESSOR MOUNTING BRACKET
ALSO AN ATTACHMENT

117-2750 GEAR GP-FRONT

117-2750 GEAR GP-FRONT
S/N 3CS1-714

117-2750 GEAR GP-FRONT

117-2750 GEAR GP-FRONT
S/N 3CS715-UP

133-7075 HOUSING GP-FRONT

133-7075 HOUSING GP-FRONT
S/N 3CS1-5800

133-7075 HOUSING GP-FRONT

133-7075 HOUSING GP-FRONT
S/N 3CS5801-11999

133-7075 HOUSING GP-FRONT

133-7075 HOUSING GP-FRONT
S/N 3CS12000-UP

LIFTING GP-ENGINE

116-5388 LIFTING GP-ENGINE

116-5388 LIFTING GP-ENGINE
S/N 3CS14384-UP
PROVIDES TALL LIFTING EYES
ALSO AN ATTACHMENT

117-2748 LIFTING GP-ENGINE

117-2748 LIFTING GP-ENGINE
S/N 3CS1-715; 3CS717-UP
STANDARD
ALSO AN ATTACHMENT

MOUNTING GP-ALTERNATOR

132-9816 MOUNTING GP-ALTERNATOR

132-9816 MOUNTING GP-ALTERNATOR
S/N 3CS719-29190
FOR USE WITH @@@@@132-9809@@@@@, @@@@@142-1989@@@@@, @@@@@133-7034@@@@@
CANNOT BE USED WITH COMPRESSOR MOUNTING
ALSO AN ATTACHMENT

136-4313 MOUNTING GP-ALTERNATOR

136-4313 MOUNTING GP-ALTERNATOR
S/N 3CS725-UP
FOR USE WITH DOUBLE LUG MOUNT ALTERNATOR WITH 101.6 MM LUG SPREAD
CANNOT BE USED WITH FAN DRIVE MOUNTING
ALSO AN ATTACHMENT

138-2538 MOUNTING GP-ALTERNATOR

138-2538 MOUNTING GP-ALTERNATOR
PROVIDES REAR SUPPORT BRACKET
AN ATTACHMENT

MOUNTING GP-ENGINE

166-6378 MOUNTING GP-ENGINE

166-6378 MOUNTING GP-ENGINE
S/N 3CS750-UP
ALSO AN ATTACHMENT

115-3004 SUPPORT GP-ENGINE

115-3004 SUPPORT GP-ENGINE
FRONT
CANNOT BE USED WITH @@@@@117-2773@@@@@
ALSO AN ATTACHMENT

116-5449 SUPPORT GP-ENGINE

116-5449 SUPPORT GP-ENGINE
FRONT
AN ATTACHMENT

116-5459 SUPPORT GP-ENGINE

116-5459 SUPPORT GP-ENGINE
S/N 3CS769-UP
STERLING-FLAT BOTTOM
ALSO AN ATTACHMENT

122-0759 SUPPORT GP-ENGINE

122-0759 SUPPORT GP-ENGINE
S/N 3CS769-UP
STERLING-FRONT RADIAL MOUNT
ALSO AN ATTACHMENT

124-2670 SUPPORT GP-ENGINE

124-2670 SUPPORT GP-ENGINE
FRONT
FOR USE WITH ADEM II AND ADEM III ENGINE CONTROL MODULES
AN ATTACHMENT

126-0175 SUPPORT GP-ENGINE

126-0175 SUPPORT GP-ENGINE
S/N 3CS731-UP
FRONT-SLOTTED FRAME MOUNTING HOLES
CANNOT BE USED WITH @@@@@117-2773@@@@@
ALSO AN ATTACHMENT

129-2910 SUPPORT GP-ENGINE

129-2910 SUPPORT GP-ENGINE
S/N 3CS993-29190
FRONT
CANNOT BE USED WITH @@@@@117-2773@@@@@
ALSO AN ATTACHMENT

130-0892 SUPPORT GP-ENGINE

130-0892 SUPPORT GP-ENGINE
CANNOT BE USED WITH @@@@@117-2773@@@@@
AN ATTACHMENT

130-0900 SUPPORT GP-ENGINE

130-0900 SUPPORT GP-ENGINE
S/N 3CS725-UP
NAVISTAR-FRONT
CANNOT BE USED WITH @@@@@117-2773@@@@@
ALSO AN ATTACHMENT

130-0901 SUPPORT GP-ENGINE

130-0901 SUPPORT GP-ENGINE
S/N 3CS1017-UP
NAVISTAR-FRONT
CANNOT BE USED WITH @@@@@117-2773@@@@@
ALSO AN ATTACHMENT

130-0902 SUPPORT GP-ENGINE

130-0902 SUPPORT GP-ENGINE
S/N 3CS1-715

138-2591 SUPPORT GP-ENGINE

138-2591 SUPPORT GP-ENGINE
CANNOT BE USED WITH @@@@@117-2773@@@@@
AN ATTACHMENT

148-1998 SUPPORT GP-ENGINE

148-1998 SUPPORT GP-ENGINE
S/N 3CS759-16016; 3CS16048-29230; 3CS29296-UP
FOR USE WITH FREIGHTLINER CABOVER TRUCK CHASSIS
ALSO AN ATTACHMENT

166-6362 SUPPORT GP-ENGINE

166-6362 SUPPORT GP-ENGINE
S/N 3CS28758-29190
FRONT
ALSO AN ATTACHMENT

196-7877 SUPPORT GP-ENGINE

196-7877 SUPPORT GP-ENGINE
S/N 3CS25728-UP
FRONT, RADIAL
ALSO AN ATTACHMENT

197-8889 SUPPORT GP-ENGINE

197-8889 SUPPORT GP-ENGINE
SLOTTED
AN ATTACHMENT

267-5588 SUPPORT GP-ENGINE

267-5588 SUPPORT GP-ENGINE
FRONT, PROVIDES MOUNTING HOLES FOR FAN SHROUD
AN ATTACHMENT

130-0885 SUPPORT-FRONT

130-0885 SUPPORT-FRONT
FOR NAVISTAR APPLICATIONS
AN ATTACHMENT

PAN GP-OIL

117-2777 PAN GP-OIL

117-2777 PAN GP-OIL -ENGINE
S/N 3CS1-715; 3CS717-UP
FRONT DEEP SUMP
ALSO AN ATTACHMENT

123-0772 PAN GP-OIL

123-0772 PAN GP-OIL -ENGINE
REAR DEEP SUMP
ALSO AN ATTACHMENT

124-2652 PAN GP-OIL

124-2652 PAN GP-OIL -ENGINE
S/N 3CS5982-23563
REAR SHALLOW SUMP
ALSO AN ATTACHMENT

124-2654 PAN GP-OIL

124-2654 PAN GP-OIL -ENGINE
S/N 3CS17135-23563; 3CS23768-29230; 3CS29719-UP
FRONT SHALLOW SUMP
ALSO AN ATTACHMENT

126-0164 PAN GP-OIL

126-0164 PAN GP-OIL -ENGINE
S/N 3CS719-29190
STANDARD CENTER SUMP
ALSO AN ATTACHMENT

166-6346 PAN GP-OIL

166-6346 PAN GP-OIL -ENGINE
S/N 3CS744-30396
FRONT DEEP SUMP
ALSO AN ATTACHMENT

166-6346 PAN GP-OIL

166-6346 PAN GP-OIL -ENGINE
S/N 3CS29269-UP
FRONT DEEP SUMP
ALSO AN ATTACHMENT

166-6347 PAN GP-OIL

166-6347 PAN GP-OIL -ENGINE
S/N 3CS744-30296
REAR DEEP SUMP

PISTON & ROD GP

132-3203 PISTON & ROD GP

132-3203 PISTON & ROD GP
16:1 RATIO

133-7082 RING GP-PISTON

133-7082 RING GP-PISTON
FOR USE WITH 10L ENGINES
FIELD INSTALLATION

POWER TAKE-OFF GP

117-2747 FLANGE GP-OUTPUT SHAFT

117-2747 FLANGE GP-OUTPUT SHAFT
FOR USE WITH @@@@@117-2769@@@@@, CUSTOMER SUPPLIED PTO FLANGE
ALSO AN ATTACHMENT

PULLEY GP

117-2771 FASTENER GP-DAMPER & PULLEY

180-5168 FASTENER GP-DAMPER & PULLEY

148-2140 PULLEY AS-IDLER

148-2140 PULLEY AS-IDLER
S/N 3CS16599-29190
FOR USE WITH CUSTOMER SUPPLIED BRACKET
ALSO AN ATTACHMENT

138-2516 PULLEY GP

138-2516 PULLEY GP -ALTERNATOR
2.8:1 DRIVE RATIO-82MM (3.23 INCH) DIAMETER PULLEY-FREIGHTLINER
FOR USE WITH 228.5MM (9 INCH) DIAMETER CRANK PULLEY, 22.19MM (.87 INCH) DIAMETER SHAFT WITH OR W/O KEY
CANNOT BE USED WITH @@@@@116-5444@@@@@
AN ATTACHMENT

123-0789 PULLEY GP-ALTERNATOR

123-0789 PULLEY GP-ALTERNATOR
S/N 3CS733-UP
3.34:1 DRIVE RATIO. 57 MM (2.24 IN) DIAMETER PULLEY
FOR USE WITH @@@@@117-2795@@@@@, 190.5 MM (7.5 IN) DIAMETER CRANKSHAFT PULLEY, 22.19 MM (0.87 IN) DIAMETER ALTERNATOR SHAFT WITH OR WITHOUT KEY
CANNOT BE USED WITH @@@@@116-5444@@@@@, @@@@@122-0762@@@@@, @@@@@123-0817@@@@@
ALSO AN ATTACHMENT

110-5115 PULLEY GP-CRANKSHAFT

110-5115 PULLEY GP-CRANKSHAFT
304.8MM(12 INCH) DIAMETER-12 GR00VE
FOR USE WITH @@@@@180-5168@@@@@
AN ATTACHMENT

116-5444 PULLEY GP-CRANKSHAFT

116-5444 PULLEY GP-CRANKSHAFT
S/N 3CS1-704; 3CS717-19785
225.5-MM (9-INCH) DIAMETER, 8 GROOVE
FOR USE WITH @@@@@117-2770@@@@@, @@@@@117-2771@@@@@, @@@@@129-2907@@@@@
CANNOT BE USED WITH @@@@@180-5168@@@@@, @@@@@123-0789@@@@@, @@@@@138-2516@@@@@, @@@@@197-9562@@@@@, @@@@@197-9563@@@@@
ALSO AN ATTACHMENT

116-5444 PULLEY GP-CRANKSHAFT

116-5444 PULLEY GP-CRANKSHAFT
S/N 3CS19785-UP
225.5-MM (9-INCH) DIAMETER, 8 GROOVE
FOR USE WITH @@@@@117-2770@@@@@, @@@@@117-2771@@@@@, @@@@@129-2907@@@@@
CANNOT BE USED WITH @@@@@180-5168@@@@@, @@@@@123-0789@@@@@, @@@@@138-2516@@@@@, @@@@@197-9562@@@@@, @@@@@197-9563@@@@@
ALSO AN ATTACHMENT

117-2795 PULLEY GP-CRANKSHAFT

117-2795 PULLEY GP-CRANKSHAFT
S/N 3CS1-19784
190.5-MM (7.5-INCH) DIAMETER, 8 GROOVE
FOR USE WITH @@@@@117-2770@@@@@, @@@@@117-2771@@@@@, @@@@@129-2907@@@@@
CANNOT BE USED WITH @@@@@180-5168@@@@@, @@@@@117-0177@@@@@, @@@@@197-9562@@@@@, @@@@@197-9563@@@@@
ALSO AN ATTACHMENT

117-2795 PULLEY GP-CRANKSHAFT

117-2795 PULLEY GP-CRANKSHAFT
S/N 3CS19785-UP
190.5-MM (7.5-INCH) DIAMETER, 8 GROOVE
FOR USE WITH @@@@@117-2770@@@@@, @@@@@117-2771@@@@@, @@@@@129-2907@@@@@
CANNOT BE USED WITH @@@@@180-5168@@@@@, @@@@@117-0177@@@@@, @@@@@197-9562@@@@@, @@@@@197-9563@@@@@
ALSO AN ATTACHMENT

122-0762 PULLEY GP-CRANKSHAFT

122-0762 PULLEY GP-CRANKSHAFT
S/N 3CS719-29190
304.8-MM (12-INCH) DIAMETER, 8 GROOVE
FOR USE WITH @@@@@180-5168@@@@@
CANNOT BE USED WITH @@@@@117-0177@@@@@, @@@@@123-0789@@@@@
ALSO AN ATTACHMENT

123-0817 PULLEY GP-CRANKSHAFT

123-0817 PULLEY GP-CRANKSHAFT
S/N 3CS769-UP
269.25-MM (10.6-INCH) DIAMETER, 14 GROOVE "K" RIB
FOR USE WITH @@@@@117-2771@@@@@
CANNOT BE USED WITH @@@@@117-0177@@@@@, @@@@@117-2770@@@@@, @@@@@123-0789@@@@@, @@@@@197-9562@@@@@
ALSO AN ATTACHMENT

155-7898 PULLEY GP-CRANKSHAFT

155-7898 PULLEY GP-CRANKSHAFT
304.8MM(12 INCH) DIAMETER-10 GROOVE
FOR USE WITH @@@@@180-5168@@@@@
AN ATTACHMENT

157-0068 PULLEY GP-CRANKSHAFT

157-0068 PULLEY GP-CRANKSHAFT
304.8-MM (12-INCH) DIAMETER, 10 GROOVE WITH ADAPTER SPACER. INCLUDES MOUNTING BOLTS
CANNOT BE USED WITH @@@@@117-2771@@@@@, @@@@@117-2779@@@@@, @@@@@180-5168@@@@@, @@@@@129-2907@@@@@, @@@@@117-2770@@@@@, @@@@@197-9562@@@@@
AN ATTACHMENT

187-3321 PULLEY GP-CRANKSHAFT

187-3321 PULLEY GP-CRANKSHAFT
S/N 3CS14384-29190; 3CS29309-UP
269.25-MM (10.6-INCH) DIAMETER, 8 GROOVE
FOR USE WITH @@@@@180-5168@@@@@, @@@@@197-9562@@@@@, @@@@@197-9563@@@@@, OR, OR
CANNOT BE USED WITH @@@@@117-2770@@@@@
ALSO AN ATTACHMENT

117-0177 PULLEY GP-FAN & ALT DRIVE

142-2011 PULLEY GP-IDLER

142-2011 PULLEY GP-IDLER
S/N 3CS24667-UP
86.5MM DIAMETER
PART OF 211-7877 BELT TENSIONER GP
ALSO AN ATTACHMENT

SHAFT GP-STUB

117-2747 FLANGE GP-OUTPUT SHAFT

117-2747 FLANGE GP-OUTPUT SHAFT
FOR USE WITH @@@@@117-2769@@@@@, CUSTOMER SUPPLIED PTO FLANGE
ALSO AN ATTACHMENT

SUPPRESSION GP-SOUND

117-2697 PANEL GP-SOUND SUPPRESSION

117-2697 PANEL GP-SOUND SUPPRESSION -ENGINE OIL PAN
FOR USE WITH @@@@@117-2777@@@@@, @@@@@123-0772@@@@@
ALSO AN ATTACHMENT

136-4345 PANEL GP-SOUND SUPPRESSION

136-4345 PANEL GP-SOUND SUPPRESSION
S/N 3CS704-715
FOR DEEP OIL PAN (FRONT OR REAR SUMP)
ALSO AN ATTACHMENT

SERPENTINE/V-BELTS

277-4586 BELT-SERPENTINE

277-4586 BELT-SERPENTINE
FIELD INSTALLATION

VALVE MECHANISM GP

115-9386 LIFTER GP-VALVE

115-9386 LIFTER GP-VALVE -MECHANISM
S/N 3CS1-717
PART OF 117-2749 VALVE MECHANISM GP

148-2063 LIFTER GP-VALVE

148-2063 LIFTER GP-VALVE -MECHANISM
S/N 3CS718-UP
PART OF 117-2749 VALVE MECHANISM GP

116-5408 MOUNTING GP-VALVE MECHANISM

116-5408 MOUNTING GP-VALVE MECHANISM
SHORT, FLAT VALVE COVERS
FOR USE WITH ENGINES NOT EQUIPPED WITH ENGINE COMPRESSION BRAKE
CANNOT BE USED WITH @@@@@117-2768@@@@@, @@@@@129-2843@@@@@
ALSO AN ATTACHMENT

115-9397 ROCKER ARM GP

115-9397 ROCKER ARM GP
PART OF 117-2749 VALVE MECHANISM GP

117-2749 VALVE MECHANISM GP

117-2749 VALVE MECHANISM GP -ENGINE
S/N 3CS1-717

117-2749 VALVE MECHANISM GP

117-2749 VALVE MECHANISM GP -ENGINE
S/N 3CS718-UP

HOUSING GP-REAR

500-1636 KIT-REAR COVER GASKET

500-1636 KIT-REAR COVER GASKET
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION

COVER GP-ENGINE

433-9956 KIT-FRONT COVER GASKET

433-9956 KIT-FRONT COVER GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE OIL PAN GASKET
FOR USE WITH @@@@@195-4121@@@@@, @@@@@198-3695@@@@@, @@@@@205-2515@@@@@, @@@@@169-2359@@@@@, @@@@@169-2370@@@@@, @@@@@171-5010@@@@@, @@@@@171-5012@@@@@, @@@@@171-8369@@@@@, @@@@@174-2658@@@@@, @@@@@175-9159@@@@@, @@@@@185-5050@@@@@, @@@@@187-0071@@@@@, @@@@@187-7812@@@@@, @@@@@191-4069@@@@@, @@@@@191-4198@@@@@, @@@@@191-4237@@@@@, @@@@@191-4269@@@@@, @@@@@197-1147@@@@@, @@@@@197-1174@@@@@, @@@@@198-3518@@@@@, @@@@@198-3668@@@@@, @@@@@199-8620@@@@@, @@@@@201-6337@@@@@, @@@@@202-9582@@@@@, @@@@@206-8187@@@@@, @@@@@214-2705@@@@@, @@@@@214-2753@@@@@, @@@@@215-5427@@@@@, @@@@@218-9560@@@@@, @@@@@221-7215@@@@@, @@@@@221-7316@@@@@, @@@@@221-7377@@@@@, @@@@@221-7478@@@@@, @@@@@222-9715@@@@@, @@@@@222-9728@@@@@, @@@@@225-9913@@@@@, @@@@@226-6837@@@@@
FIELD INSTALLATION

456-1719 KIT-FRONT COVER GASKET

456-1719 KIT-FRONT COVER GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@225-9913@@@@@
FIELD INSTALLATION

465-0764 KIT-FRONT COVER GASKET

465-0764 KIT-FRONT COVER GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@132-3197@@@@@, @@@@@165-0605@@@@@
FIELD INSTALLATION

Information:

(For parts list, see above)

BASIC ENGINE

ADAPTER GP-ENGINE TO XMSN

Specifications

Engine to Transmission Adapter
C-10 and C-12 Truck Engines

AIR COMPRESSOR GP

General Service Information

Introduction
BENDIX AIR COMPRESSOR TU-FLO 1400 AIR COMP

Tu-Flo 1400 Air Compressor
BENDIX AIR COMPRESSOR TU-FLO 1400 AIR COMP

Introduction
BENDIX AIR COMPRESSOR

Description
BENDIX AIR COMPRESSOR

Operation
BENDIX AIR COMPRESSOR

Intake And Compression Of Air (Loaded)
BENDIX AIR COMPRESSOR

Air Induction
BENDIX AIR COMPRESSOR

Preventative Maintenance
BENDIX AIR COMPRESSOR

Removal And Disassembly
BENDIX AIR COMPRESSOR

Cleaning Of Parts
BENDIX AIR COMPRESSOR

Inspection Of Parts
BENDIX AIR COMPRESSOR

Repairs
BENDIX AIR COMPRESSOR

Assembly
BENDIX AIR COMPRESSOR

Tu-Flo 550 Specifications
BENDIX AIR COMPRESSOR

Torque Specifications
BENDIX AIR COMPRESSOR

Dimensional Data
BENDIX AIR COMPRESSOR

Maintenance Kits And Available Service Parts
BENDIX AIR COMPRESSOR

Compressor Troubleshooting
BENDIX AIR COMPRESSOR

Introduction
BENDIX AIR COMPRESSOR

Description
BENDIX AIR COMPRESSOR

Operation
BENDIX AIR COMPRESSOR

Air Induction
BENDIX AIR COMPRESSOR

Preventative Maintenance
BENDIX AIR COMPRESSOR

Removal And Disassembly
BENDIX AIR COMPRESSOR

Cleaning Of Parts
BENDIX AIR COMPRESSOR

Inspection Of Parts
BENDIX AIR COMPRESSOR

Repairs
BENDIX AIR COMPRESSOR

Assembly
BENDIX AIR COMPRESSOR

Tu-Flo 750 Specifications
BENDIX AIR COMPRESSOR

Torque Specifications
BENDIX AIR COMPRESSOR

Dimensional Data
BENDIX AIR COMPRESSOR

Maintenance Kits And Available Service Parts
BENDIX AIR COMPRESSOR

Compressor Troubleshooting
BENDIX AIR COMPRESSOR

EL-740 Air Compressor
MIDLAND AIR COMPRESSORS

EL-1300/EL-1600 Air Compressors
MIDLAND AIR COMPRESSORS

Truck Engine News

Air Compressor Drive Gear Holding Tool Available{0700,1803}
1999/02/01

New Integral Seal (Air Compressor Mounting Seal) Available{1803}
1999/04/01

Special Instructions Are Now Available For Converting Four Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated, Eliminating Inlet Regulating Valve And Related Maintenance{1803}
1999/07/01

The New Bendix DuraFlo 596 Air Compressor Has Reduced Maintenance Costs {1803}
2000/01/01

A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01

Repair Guidelines for Air Compressors {1803}
2003/10/01

A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01

Reworked Air Compressors Now Have "R" on the Serial Number Plate {1803, 1804}
2009/04/01

Operation and Maintenance Manual

Air Compressor - Inspect
3406E, C-10, C-12, C-15, C-16 Truck Engines

Air Compressor Filter - Clean/Replace
3406E, C-10, C-12, C-15, C-16 Truck Engines

Special Instruction

Converting a Four Cylinder Air Compressor Air Supply From a Pressurized Air Supply to a Naturally Aspirated Air Supply{1803}
Converting a Four Cylinder Air Compressor Air Supply From a Pressurized Air Supply to a Naturally Aspirated Air Supply{1803}

Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}

Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}
Retrofitting The Bendix Dura-Flo 596 Air Compressor to Existing Industrial Engines and Truck Engines{1803}

Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-Australia

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-CFEL

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-CSARL

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-Americas

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-Truck/Ag/Marine

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Specifications

Specification
Bendix DuraFlo 596 Air Compressor

Air Compressor Maintenance Procedures
Bendix DuraFlo 596 Air Compressor

Accessory Drive (Air Compressor)
C-10 and C-12 Truck Engines

Air Compressor
C-10 and C-12 Truck Engines

Service Letter-China

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Service Letter-Asia

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Systems Operation

Operation of the Air Compressor
Bendix DuraFlo 596 Air Compressor

Compression of Air (Loaded)
Bendix DuraFlo 596 Air Compressor

No Compression of Air (Unloaded)
Bendix DuraFlo 596 Air Compressor

Lubrication of the Air Compressor
Bendix DuraFlo 596 Air Compressor

Cooling of the Air Compressor
Bendix DuraFlo 596 Air Compressor

Air Induction
Bendix DuraFlo 596 Air Compressor

General Information
Bendix DuraFlo 596 Air Compressor

Service Letter-APD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS

Testing and Adjusting

Air Compressor Fails to Unload
Bendix DuraFlo 596 Air Compressor

Excessive Oil at Exhaust Ports or Air Strainer
Bendix DuraFlo 596 Air Compressor

Air Compressor is Noisy
Bendix DuraFlo 596 Air Compressor

Excessive Build-Up and Recover Time
Bendix DuraFlo 596 Air Compressor

Air Compressor Leaks Oil
Bendix DuraFlo 596 Air Compressor

Air Compressor Cycles Constantly
Bendix DuraFlo 596 Air Compressor

Air Compressor Leaks Coolant
Bendix DuraFlo 596 Air Compressor

Disassembly and Assembly

Air Compressor - Remove and Install
C-10 and C-12 On-Highway Engines

Air Compressor Drive Gear - Install
C-10 and C-12 On-Highway Engines

Air Compressor Drive Gear - Remove
C-10 and C-12 On-Highway Engines

Air Compressor Drive Gear - Install
C-10 and C-12 On-Highway Engines

Air Compressor Drive Gear - Install - Two Cylinder
C-10 and C-12 On-Highway Engines

Air Compressor - Disassemble
C-10 and C-12 On-Highway Engines

Air Compressor - Assemble
C-10 and C-12 On-Highway Engines

Service Magazine

A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23

BELT TIGHTENER GP

Truck Engine News

New Idler Pulley Now Available {1358}
2000/01/01

Operation and Maintenance Manual

Belt Tensioner - Inspect
3406E, C-10, C-12, C-15, C-16 Truck Engines

Service Letter-NACD

Product Support Program For Installing A New Idler Pulley Assembly On Certain 3406E, C-10, And C-12 Engines
Product Support Program For Installing A New Idler Pulley Assembly On Certain 3406E, C-10, And C-12 Engines

Service Letter-Australia

Service Letter-CFEL

Service Letter-Americas

Service Letter-Truck/Ag/Marine

Specifications

Belt Tension Chart
C-10 and C-12 Truck Engines

Belt Tensioner
C-10 and C-12 Truck Engines

Belt Tightener
C-10 and C-12 Truck Engines

Belt Tensioner
C-10 and C-12 Truck Engines

Service Letter-China

Service Letter-Asia

Service Letter-APD

Disassembly and Assembly

Belt Tensioner - Remove and Install
C-10 and C-12 On-Highway Engines

ENGINE BRAKE GP

Truck Engine News

A New Valve Bridge Assembly Is Available For Engines Equipped With A Compression Brake {1119, 1121}
2000/11/01

Compression Brakes Should be Inspected Carefully During Repairs to the Cylinder Head and Valve Mechanism {1119}
2003/05/01

Operation and Maintenance Manual

Auxiliary Engine Brakes
3406E, C-10, C-12, C-15, C-16 Truck Engines

BrakeSaver
3406E, C-10, C-12, C-15, C-16 Truck Engines

Compression Brake
3406E, C-10, C-12, C-15, C-16 Truck Engines

Compression Brake - Inspect/Adjust/Replace
3406E, C-10, C-12, C-15, C-16 Truck Engines

Technical Information Bulletin

Missing Pipe Plugs on the C-10, C-12, C-15, C15, and C-16 Engines Jake Brake{1119}
Missing Pipe Plugs on the C-10, C-12, C-15, C15, and C-16 Engines Jake Brake{1119}

Specifications

Compression Brake
C-10 and C-12 Truck Engines

Systems Operation

Compression Brake
C-10 and C-12 Truck Engines

Testing and Adjusting

Slave Piston Lash - Adjust
C-10 and C-12 Truck Engines

Control Valve (Compression Brake) - Test
C-10 and C-12 Truck Engines

Solenoid Valve (Compression Brake) - Test
C-10 and C-12 Truck Engines

Troubleshooting

Engine Retarder (Compression Brake) Will Not Turn ON
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines

Retarder (Compression Brake) Solenoid Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines

Auxiliary Brake Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines

0121-06 Low/High Retarder current high (14)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines

0121-05 Low/High Retarder current low (14)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines

0122-06 Med/High Retarder current high (14)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines

0122-05 Med/High Retarder current low (14)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines

Disassembly and Assembly

Compression Brake - Remove
C-10 and C-12 On-Highway Engines

Compression Brake - Install
C-10 and C-12 On-Highway Engines

Compression Brake - Disassemble
C-10 and C-12 On-Highway Engines

Compression Brake - Assemble
C-10 and C-12 On-Highway Engines

CAMSHAFT GP

Truck Engine News

Checking the Timing Marks on the Front Gear Train {1204, 1212, 1234}
2004/06/01

Special Instruction

Caterpillar has released a new Cylinder Head, a new Cylinder Block, a new Cylinder Head Gasket, and a new Bracket for the Camshaft Follower on the C-10 and C-12 Truck Engines{1101, 1124, 1201, 1209}
Caterpillar has released a new Cylinder Head, a new Cylinder Block, a new Cylinder Head Gasket, and a new Bracket for the Camshaft Follower on the C-10 and C-12 Truck Engines{1101, 1124, 1201, 1209}

Specifications

Camshaft
C-10 and C-12 Truck Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Testing and Adjusting

Excessive Bearing Wear - Inspect
C-10 and C-12 Truck Engines

Disassembly and Assembly

Camshaft Gear - Remove and Install
C-10 and C-12 On-Highway Engines

Camshaft - Remove
C-10 and C-12 On-Highway Engines

Camshaft - Install
C-10 and C-12 On-Highway Engines

Camshaft Bearings - Install
C-10 and C-12 On-Highway Engines

Camshaft Bearings - Remove
C-10 and C-12 On-Highway Engines

CARRIER GP-SEAL

Crankshaft Rear Seal Carrier - Remove and Install
C-10 and C-12 On-Highway Engines

COMPRESSOR GP-REFRIGERANT

Air Conditioner Support Bracket - Remove and Install
C-10 and C-12 On-Highway Engines

CRANKSHAFT GP

Truck Engine News

Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}
1999/03/01

Identifying the Correct Crankshaft Gear {1204}
2003/03/01

Checking the Timing Marks on the Front Gear Train {1204, 1212, 1234}
2004/06/01

The Maximum Temperature for Heating the Crankshaft Gear for Installation has Changed {1202, 1204}
2005/11/01

Engine News

A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}

Operation and Maintenance Manual

Crankshaft End Play - Test
3406E, C-10, C-12, C-15, C-16 Truck Engines

Special Instruction

Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}

Procedure for Checking the Crankshaft's End Play{1202}
Procedure for Checking the Crankshaft's End Play{1202}

Specifications

Main Bearing Journal
C-10 and C-12 Truck Engines

Connecting Rod Bearing Journal
C-10 and C-12 Truck Engines

Crankshaft
C-10 and C-12 Truck Engines

Crankshaft Seals
C-10 and C-12 Truck Engines

Reuse And Salvage Guidelines

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Testing and Adjusting

Excessive Bearing Wear - Inspect
C-10 and C-12 Truck Engines

Main Bearings - Inspect
C-10 and C-12 Truck Engines

Disassembly and Assembly

Bearing Clearance - Check
C-10 and C-12 On-Highway Engines

Crankshaft Rear Seal - Remove
C-10 and C-12 On-Highway Engines

Crankshaft Rear Seal - Install
C-10 and C-12 On-Highway Engines

Crankshaft Front Seal - Remove
C-10 and C-12 On-Highway Engines

Crankshaft Front Seal - Install
C-10 and C-12 On-Highway Engines

Crankshaft Main Bearings - Remove
C-10 and C-12 On-Highway Engines

Crankshaft Main Bearings - Install
C-10 and C-12 On-Highway Engines

Crankshaft - Remove
C-10 and C-12 On-Highway Engines

Crankshaft - Install
C-10 and C-12 On-Highway Engines

Crankshaft Gear - Remove and Install
C-10 and C-12 On-Highway Engines

Service Magazine

40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}

CYLINDER BLOCK GP

Truck Engine News

Use159-9404 Counterbore Tool Group to Bore Cylinder Block {1201, 1217}
2000/10/01

A New Liner O-Ring Seal is Available for Certain C10 through C13 Truck Engines {1216, 7555}
2013/12/23

Engine News

A New Liner O-Ring Seal is Available for Certain C10 Through C13 Engines {1201, 7555}
2013/12/23

Special Instruction

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}

Specifications

Cylinder Liner Projection
C-10 and C-12 Truck Engines

Main Bearing Journal
C-10 and C-12 Truck Engines

Cylinder Block
C-10 and C-12 Truck Engines

Cylinder Liner
C-10 and C-12 Truck Engines

Piston Cooling Jet
C-10 and C-12 Truck Engines

Cylinder Liner
C-10 and C-12 Truck Engines

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Letter-APD

Testing and Adjusting

Cylinder Block - Inspect
C-10 and C-12 Truck Engines

Cylinder Liner Projection - Inspect
C-10 and C-12 Truck Engines

Excessive Bearing Wear - Inspect
C-10 and C-12 Truck Engines

Main Bearings - Inspect
C-10 and C-12 Truck Engines

Disassembly and Assembly

Bearing Clearance - Check
C-10 and C-12 On-Highway Engines

Cylinder Liner - Install
C-10 and C-12 On-Highway Engines

Piston Cooling Jets - Remove and Install
C-10 and C-12 On-Highway Engines

Crankshaft Main Bearings - Remove
C-10 and C-12 On-Highway Engines

Crankshaft Main Bearings - Install
C-10 and C-12 On-Highway Engines

Cylinder Liner - Remove
C-10 and C-12 On-Highway Engines

Camshaft Bearings - Install
C-10 and C-12 On-Highway Engines

Camshaft Bearings - Remove
C-10 and C-12 On-Highway Engines

CYLINDER HEAD GP

Truck Engine News

Change to Tightening Procedure for Cylinder Head Bolts in Specifications, RENR1322 and Specifications, RENR2234 {1100}
1999/12/01

Change to Tightening Procedure for Cylinder Head Bolts in Disassembly and Assembly, RENR2236 {1100}
1999/12/01

Plastic Cards With The Revised Procedure For Tightening Cylinder Head Bolts Will Be Distributed By Mail {1100}
2000/01/01

New Cylinder Head Gasket for C-10and C-12 Truck Engines {1124}
2000/12/01

Diagnosis of Failure of Exhaust Valve {1105}
2003/08/01

Improved Valve Springs are Now Used {1100, 1108}
2005/12/01

Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01

A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
2006/03/01

Operation and Maintenance Manual

Engine Valve Lash - Inspect/Adjust
3406E, C-10, C-12, C-15, C-16 Truck Engines

Cylinder Head Grounding Stud - Inspect/Clean/Tighten
3406E, C-10, C-12, C-15, C-16 Truck Engines

Special Instruction

Installation of Cylinder Head Gasket{1124}
Installation of Cylinder Head Gasket{1124}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Service Letter-NACD

PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET AFTER A FAILURE HAS OCCURRED ON CERTAIN C-10 AND C-12 TRUCK ENGINES
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET AFTER A FAILURE HAS OCCURRED ON CERTAIN C-10 AND C-12 TRUCK ENGINES

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Failures of Cylinder Heads with the Intake Valves and Exhaust Valves in the Incorrect Positions{1100, 1105}
Failures of Cylinder Heads with the Intake Valves and Exhaust Valves in the Incorrect Positions{1100, 1105}

Specifications

Cylinder Head Valves
C-10 and C-12 Truck Engines

Cylinder Head
C-10 and C-12 Truck Engines

Tool Operating Manual

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}

Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Applied Failure Analysis

Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}

Information Release Memo

CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Testing and Adjusting

Engine Valve Lash - Inspect/Adjust
C-10 and C-12 Truck Engines

Disassembly and Assembly

Electronic Unit Injector Sleeve - Remove
C-10 and C-12 On-Highway Engines

Electronic Unit Injector Sleeve - Install
C-10 and C-12 On-Highway Engines

Inlet and Exhaust Valves - Remove and Install
C-10 and C-12 On-Highway Engines

Inlet and Exhaust Valve Guides - Remove and Install
C-10 and C-12 On-Highway Engines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
C-10 and C-12 On-Highway Engines

Cylinder Head - Remove
C-10 and C-12 On-Highway Engines

Cylinder Head - Install
C-10 and C-12 On-Highway Engines

Inlet and Exhaust Valve Springs - Remove and Install
C-10 and C-12 On-Highway Engines

Camshaft Bearings - Install
C-10 and C-12 On-Highway Engines

Camshaft Bearings - Remove
C-10 and C-12 On-Highway Engines

DAMPER GP

Operation and Maintenance Manual

Crankshaft Vibration Damper - Inspect
3406E, C-10, C-12, C-15, C-16 Truck Engines

Specifications

Vibration Damper and Pulley
C-10 and C-12 Truck Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Testing and Adjusting

Vibration Damper - Check
C-10 and C-12 Truck Engines

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install
C-10 and C-12 On-Highway Engines

DRIVE GP-ACCESSORY

Accessory Drive - Remove
C-10 and C-12 On-Highway Engines

Accessory Drive - Install
C-10 and C-12 On-Highway Engines

Accessory Drive - Disassemble
C-10 and C-12 On-Highway Engines

Accessory Drive - Assemble
C-10 and C-12 On-Highway Engines

DRIVE GP-AUXILIARY

Specifications

Auxiliary Drive Pulley
C-10 and C-12 Truck Engines

DRIVE GP-FAN

Operation and Maintenance Manual

Fan Drive Bearing - Lubricate
3406E, C-10, C-12, C-15, C-16 Truck Engines

Disassembly and Assembly

Fan Drive - Disassemble
C-10 and C-12 On-Highway Engines

Fan Drive - Assemble
C-10 and C-12 On-Highway Engines

Fan Drive - Remove
C-10 and C-12 On-Highway Engines

ENGINE GP

Engine News

Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}

Special Instruction

Oil and Your Engine {1000}
Oil and Your Engine {1000}

Service Magazine

Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}

FASTENER GP-ENGINE

Reuse And Salvage Guidelines

Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}

FLYWHEEL GP

Specifications

Flywheel
C-10 and C-12 Truck Engines

Engine to Transmission Adapter
C-10 and C-12 Truck Engines

Flywheel Housing
C-10 and C-12 Truck Engines

Flywheel Housing - Rear Power Take-Off (RPTO)
C-10 and C-12 Truck Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}

Testing and Adjusting

Flywheel - Inspect
C-10 and C-12 Truck Engines

Disassembly and Assembly

Flywheel - Remove
C-10 and C-12 On-Highway Engines

Flywheel - Install
C-10 and C-12 On-Highway Engines

GEAR GP

Truck Engine News

Air Compressor Drive Gear Holding Tool Available{0700,1803}
1999/02/01

Identifying the Correct Crankshaft Gear {1204}
2003/03/01

Checking the Timing Marks on the Front Gear Train {1204, 1212, 1234}
2004/06/01

The Maximum Temperature for Heating the Crankshaft Gear for Installation has Changed {1202, 1204}
2005/11/01

Special Instruction

Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}
Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}

Specifications

Gear Group (Front)
C-10 and C-12 Truck Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}

Testing and Adjusting

Gear Group (Front) - Time
C-10 and C-12 Truck Engines

Disassembly and Assembly

Gear Group (Front) - Remove
C-10 and C-12 On-Highway Engines

Gear Group (Front) - Install
C-10 and C-12 On-Highway Engines

HOUSING GP-FLYWHEEL

Truck Engine News

New Stronger Bolts And Washers Help Prevent Oil Leaks At Rear Power Take-Off (RPTO) Flywheel Housing To Block Joint{1157}
1999/07/01

A New Flywheel Housing Gasket Is Now Available For Engines With A PTO {1157, 1165}
2002/03/01

Change to Disassembly and Assembly Manual {1157}
2002/03/01

Change to Specifications Manual {1157}
2002/03/01

Special Instruction

Troubleshooting the Flywheel Housing for Failures of the Bolts{1157, 1157}
Troubleshooting the Flywheel Housing for Failures of the Bolts{1157, 1157}

Specifications

Flywheel Housing
C-10 and C-12 Truck Engines

Flywheel Housing - Rear Power Take-Off (RPTO)
C-10 and C-12 Truck Engines

Testing and Adjusting

Flywheel Housing - Inspect
C-10 and C-12 Truck Engines

Disassembly and Assembly

Flywheel Housing - Remove and Install
C-10 and C-12 On-Highway Engines

HOUSING GP-FRONT

Truck Engine News

Front Housing Bolts for the C-10 and C-12 {1151}
2002/07/01

A Improved Gasket is Now Available {1151, 1162}
2005/07/01

Special Instruction

C-10, C-12, 3176C, and 3196 Bolts for the Front Housing{1151}
C-10, C-12, 3176C, and 3196 Bolts for the Front Housing{1151}

Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}
Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}

Technical Information Bulletin

NEW O-RING SEAL USED BETWEEN THE FRONT CRANKSHAFT SEAL AND THE FRONT HOUSING
NEW O-RING SEAL USED BETWEEN THE FRONT CRANKSHAFT SEAL AND THE FRONT HOUSING

Specifications

Housing (Front)
C-10 and C-12 Truck Engines

Crankshaft Seals
C-10 and C-12 Truck Engines

Reuse And Salvage Guidelines

Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Disassembly and Assembly

Housing (Front) - Remove
C-10 and C-12 On-Highway Engines

Front Cover - Remove
C-10 and C-12 On-Highway Engines

Front Cover - Install
C-10 and C-12 On-Highway Engines

Housing (Front) - Install
C-10 and C-12 On-Highway Engines

LIFTER GP

Truck Engine News

Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/01

PAN GP-OIL

Remove Engine Oil Pan To Determine Source Of Internal Coolant Leakage{1302,1348,1361,1395}
1999/04/01

Specifications

Engine Oil Pan
C-10 and C-12 Truck Engines

Disassembly and Assembly

Engine Oil Pan - Remove and Install
C-10 and C-12 On-Highway Engines

PISTON & ROD GP

Truck Engine News

Connecting Rods with Dual Bearing Tab Slots are OK to Use {1218}
2002/10/01

New Guidelines for Inspecting Pistons {1214}
2006/01/01

Engine News

Multiple Configurations of Bearing Tab Slots Are Used on Connecting Rods for Certain C10 and C12 Commercial Engines {1218, 1225, 1239}
2012/09/20

Special Instruction

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

Connecting Rod Bearings
Connecting Rod Bearings

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Specifications

Connecting Rod Bearing Journal
C-10 and C-12 Truck Engines

Piston and Rings
C-10 and C-12 Truck Engines

Piston Cooling Jet
C-10 and C-12 Truck Engines

Connecting Rod
C-10 and C-12 Truck Engines

Tool Operating Manual

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

Reuse And Salvage Guidelines

Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}

Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Testing and Adjusting

Engine Crankcase Pressure (Blowby) - Test
C-10 and C-12 Truck Engines

Piston Ring Groove - Inspect
C-10 and C-12 Truck Engines

Cylinder Liner Projection - Inspect
C-10 and C-12 Truck Engines

Excessive Bearing Wear - Inspect
C-10 and C-12 Truck Engines

Connecting Rod Bearings - Inspect
C-10 and C-12 Truck Engines

Disassembly and Assembly

Bearing Clearance - Check
C-10 and C-12 On-Highway Engines

Piston Cooling Jets - Remove and Install
C-10 and C-12 On-Highway Engines

Pistons and Connecting Rods - Remove
C-10 and C-12 On-Highway Engines

Pistons and Connecting Rods - Install
C-10 and C-12 On-Highway Engines

Pistons and Connecting Rods - Disassemble
C-10 and C-12 On-Highway Engines

Connecting Rod Bearings - Remove
C-10 and C-12 On-Highway Engines

Connecting Rod Bearings - Install
C-10 and C-12 On-Highway Engines

Pistons and Connecting Rods - Assemble
C-10 and C-12 On-Highway Engines

POWER TAKE-OFF GP

Truck Engine News

New Stronger Bolts And Washers Help Prevent Oil Leaks At Rear Power Take-Off (RPTO) Flywheel Housing To Block Joint{1157}
1999/07/01

Specifications

Rear Power Take-Off (RPTO)
C-10 and C-12 Truck Engines

General Information
On-Highway Engines Electronic PTO Installation and Application Guide

Systems Operation

Rear Power Take-Off (RPTO)
C-10 and C-12 Truck Engines

General Information
On-Highway Engines Electronic PTO Installation and Application Guide

General Information
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application

Disassembly and Assembly

Rear Power Take-Off (RPTO) - Remove
C-10 and C-12 On-Highway Engines

Rear Power Take-Off (RPTO) - Install
C-10 and C-12 On-Highway Engines

PULLEY GP

Truck Engine News

An Improved Idler Pulley Has Been Released {1358}
2005/07/01

An Improved Idler Pulley Has Been Released {1358}
2005/08/01

Operation and Maintenance Manual

Crankshaft Vibration Damper - Inspect
3406E, C-10, C-12, C-15, C-16 Truck Engines

Service Letter-NACD

Service Letter-Australia

Service Letter-CFEL

Service Letter-Americas

Service Letter-Truck/Ag/Marine

Specifications

Vibration Damper and Pulley
C-10 and C-12 Truck Engines

Auxiliary Drive Pulley
C-10 and C-12 Truck Engines

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}

Service Letter-APD

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install
C-10 and C-12 On-Highway Engines

TOOLS

Truck Engine News

Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}
1999/03/01

Special Instruction

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Technical Information Bulletin

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}

NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705}
NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Reuse And Salvage Guidelines

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Magazine

40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

SERPENTINE/V-BELTS

Operation and Maintenance Manual

Belt - Inspect
3406E, C-10, C-12, C-15, C-16 Truck Engines

Belt Tensioner - Inspect
3406E, C-10, C-12, C-15, C-16 Truck Engines

Technical Information Bulletin

Belt Squeal
Belt Squeal

Specifications

Belt Tension Chart
C-10 and C-12 Truck Engines

VALVE MECHANISM GP

Truck Engine News

A New Valve Bridge Assembly Is Available For Engines Equipped With A Compression Brake {1119, 1121}
2000/11/01

A New Valve Bridge Assembly Is Available {1121}
2001/03/01

New Inlet Valves for Cylinder Head Groups in Truck Engines {1105}
2001/07/01

New Tightening Procedure for the Base of the Valve Mechanism Cover {1107}
2002/08/01

Improved Valve Springs are Now Used {1100, 1108}
2005/12/01

Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/01

Valve Bridges are Included with Cylinder Heads {1102, 1123}
2009/09/01

Operation and Maintenance Manual

Engine Valve Lash - Inspect/Adjust
3406E, C-10, C-12, C-15, C-16 Truck Engines

Compression Brake
3406E, C-10, C-12, C-15, C-16 Truck Engines

Special Instruction

Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR RESETTING VALVE LASH ON CERTAIN C-10 AND C-12 ENGINES IN ON-HIGHWAY TRUCK AND COMMERCIAL APPLICATIONS, AND IN CERTAIN 3196 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR RESETTING VALVE LASH ON CERTAIN C-10 AND C-12 ENGINES IN ON-HIGHWAY TRUCK AND COMMERCIAL APPLICATIONS, AND IN CERTAIN 3196 MARINE ENGINES

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Camshaft Injector Lifter (Roller Follower) Assembly Replacement
Camshaft Injector Lifter (Roller Follower) Assembly Replacement

Inspection Of The Unit Injector Lifter Assembly
Inspection Of The Unit Injector Lifter Assembly

Specifications

Electronic Unit Injector Rocker Arm
C-10 and C-12 Truck Engines

Valve Mechanism Cover
C-10 and C-12 Truck Engines

Lifter Group
C-10 and C-12 Truck Engines

Rocker Shaft
C-10 and C-12 Truck Engines

Valve Mechanism
C-10 and C-12 Truck Engines

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Information Release Memo

CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Testing and Adjusting

Finding Top Center Position for No. 1 Piston
C-10 and C-12 Truck Engines

Engine Valve Lash - Inspect/Adjust
C-10 and C-12 Truck Engines

Disassembly and Assembly

Valve Mechanism Cover - Remove and Install
C-10 and C-12 On-Highway Engines

Valve Mechanism Cover Base - Remove and Install
C-10 and C-12 On-Highway Engines

Lifter Group - Remove and Install
C-10 and C-12 On-Highway Engines

Compression Brake - Remove
C-10 and C-12 On-Highway Engines

Compression Brake - Install
C-10 and C-12 On-Highway Engines

Compression Brake - Disassemble
C-10 and C-12 On-Highway Engines

Compression Brake - Assemble
C-10 and C-12 On-Highway Engines

Rocker Shaft and Pushrod - Remove
C-10 and C-12 On-Highway Engines

Rocker Shaft and Pushrod - Install
C-10 and C-12 On-Highway Engines

Rocker Shaft - Disassemble
C-10 and C-12 On-Highway Engines

Rocker Shaft - Assemble
C-10 and C-12 On-Highway Engines

COVER GP-ENGINE

Reuse And Salvage Guidelines

Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

ENGINE OVERHAUL KIT

Truck Engine News

A New Improved Seal Is Now Used in the Reman Water Pumps of Certain Engines {1000, 1361, 7555}
2012/05/16

C-10 Truck Engine 3CS00001-UP BASIC ENGINE Caterpillar SIS

Parts group C-10:

Information:

Truck sale: