AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

C-10 Truck Engine 3CS00001-UP FUEL SYSTEM Caterpillar SIS



TRUCK ENGINE C-10 TRUCK ENGINE 3CS
 C-10 Truck Engine 3CS00001-UP SEBP2603 C-10 3CS   (1996)

Parts group C-10:

  For full view, you need register
FUEL SYSTEM
FILTER GP-FUEL
COVER GP-FUEL FILTER BASE
116-5410 COVER GP-FUEL FILTER BASE
116-5410 COVER GP-FUEL FILTER BASE
PROVIDES COVER AND SEAL WHEN NO PRIMING PUMP IS REQUIRED
FOR USE WITH METRIC FUEL FILTER BASE, FUEL FILTER GPS
CANNOT BE USED WITH FUEL PRIMING PUMPS
ALSO AN ATTACHMENT
117-2790 COVER GP-FUEL FILTER BASE
117-2790 COVER GP-FUEL FILTER BASE
S/N 3CS725-UP
FOR USE WITH REMOTE MOUNTED SECONDARY FILTER
ALSO AN ATTACHMENT
COVER GP-FUEL FILTER BASE
118-4490 COVER GP-FUEL FILTER BASE
118-4490 COVER GP-FUEL FILTER BASE
S/N 3CS748-UP
PART OF 117-2790 COVER GP-FUEL FILTER BASE
ALSO AN ATTACHMENT
FILTER GP-FUEL
117-2779 FILTER GP-FUEL
117-2779 FILTER GP-FUEL
2 MICRON
CANNOT BE USED WITH @@@@@157-0068@@@@@
ALSO AN ATTACHMENT
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
PRIMARY
AN ATTACHMENT
FILTER GP-PRIMARY FUEL
227-2431 FILTER GP-PRIMARY FUEL
227-2431 FILTER GP-PRIMARY FUEL
PROVIDES PRIMARY FUEL FILTER
AN ATTACHMENT
FILTER GP-PRIMARY FUEL
2W-6071 FILTER GP-PRIMARY FUEL
2W-6071 FILTER GP-PRIMARY FUEL
AN ATTACHMENT
FILTER GP-SECONDARY FUEL
116-5413 FILTER GP-SECONDARY FUEL
116-5413 FILTER GP-SECONDARY FUEL
ADVANCED EFFICIENCY
AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
S/N 3CS12372-UP
ALSO AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
FIELD REPLACEMENT FOR @@@@@8N-0940@@@@@
FIELD INSTALLATION
VALVE GP-CHECK
233-6742 VALVE GP-CHECK
233-6742 VALVE GP-CHECK -FUEL
S/N 3CS3530-UP
PART OF 130-0780, 130-0782, 130-0784, 165-0627, 165-0628, 165-0629, 165-0630, 166-6363, 187-3317 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
VALVE GP-CHECK
233-6742 VALVE GP-CHECK
233-6742 VALVE GP-CHECK -FUEL
S/N 3CS12530-UP
PART OF 130-0780, 130-0782, 130-0784, 165-0627, 165-0628, 165-0629, 165-0630, 166-6363, 187-3317 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
VALVE GP-CHECK
238-0296 VALVE GP-CHECK
238-0296 VALVE GP-CHECK -FUEL
S/N 3CS12530-UP
PART OF 233-6742 VALVE GP-CHECK
ALSO AN ATTACHMENT
VALVE GP-CHECK
281-2725 VALVE GP-CHECK
281-2725 VALVE GP-CHECK -FUEL
PART OF 233-6742 VALVE GP-CHECK
ALSO AN ATTACHMENT
FUEL SYSTEM GP
419-9849 KIT-FUEL SYSTEM GASKET
419-9849 KIT-FUEL SYSTEM GASKET
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL ENGINE MOUNTED FUEL SYSTEM COMPONENTS. KIT DOES NOT INCLUDE INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED
FIELD INSTALLATION
KIT-FUEL SYSTEM PARTS
248-1394 KIT-INJECTOR
248-1394 KIT-INJECTOR
FOR USE WITH PQ0863
FIELD INSTALLATION
LINES GP-FUEL
FITTING GP-FUEL LINES
116-5407 FITTING GP-FUEL LINES
116-5407 FITTING GP-FUEL LINES
3/4-16X45 DEGREE FLARE-#8-90 DEGREE CONNECTOR
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
116-5409 FITTING GP-FUEL LINES
116-5409 FITTING GP-FUEL LINES
S/N 3CS1-704; 3CS750-UP
FUEL RETURN, 3/4-16X45-DEGREE FLARE, 90-DEGREE ELBOW
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
116-5419 FITTING GP-FUEL LINES
116-5419 FITTING GP-FUEL LINES
S/N 3CS725-UP
3/4-16X45 DEGREE FLARE- #8 STRAIGHT CONNECTOR
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
116-5420 FITTING GP-FUEL LINES
116-5420 FITTING GP-FUEL LINES
S/N 3CS719-29190
7/8-14X45-DEG FLARE, 90-DEG ELBOW. #10 FUEL SUPPLY CONNECTION
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
116-5421 FITTING GP-FUEL LINES
116-5421 FITTING GP-FUEL LINES
7/8-14X45-DEGREE FLARE, TEE CONNECTOR WITH BLEED FITTING
CANNOT BE USED WITH @@@@@123-0783@@@@@
AN ATTACHMENT
FITTING GP-FUEL LINES
116-5437 FITTING GP-FUEL LINES
116-5437 FITTING GP-FUEL LINES
7/8-14X37 DEGREE FLARE, 45 DEGREE ELBOW
FOR USE WITH DUAL SEAT HOSE ENDS
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
117-0183 FITTING GP-FUEL LINES
117-0183 FITTING GP-FUEL LINES
S/N 3CS1-715; 3CS717-UP
NUMBER 10 STRAIGHT FUEL INLET FITTING WITHOUT BLEED AND HAS 7/8-14X45-DEG FLARE
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
117-0184 FITTING GP-FUEL LINES
117-0184 FITTING GP-FUEL LINES
S/N 3CS717-UP
5/8-18X45 DEG FLARE-#6 STRAIGHT CONNECTOR
ALSO AN ATTACHMENT
PLUG GP-FUEL LINES
123-0782 PLUG GP-FUEL LINES
123-0782 PLUG GP-FUEL LINES
S/N 3CS719-29190
FUEL BLEED LOCATION ON FUEL ADAPTER
CANNOT BE USED WITH @@@@@123-0783@@@@@
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
123-0774 LINES GP-FUEL INJECTION
123-0774 LINES GP-FUEL INJECTION
S/N 3CS704-704
HIGH MOUNT
FOR USE WITH 90 DEGREE RETURN FITTING
LINES GP-FUEL INJECTION
130-0780 LINES GP-FUEL INJECTION
130-0780 LINES GP-FUEL INJECTION
S/N 3CS1-704; 3CS717-12529
STANDARD FILTER LOCATION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
130-0780 LINES GP-FUEL INJECTION
130-0780 LINES GP-FUEL INJECTION
S/N 3CS12530-30296
STANDARD FILTER LOCATION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
130-0780 LINES GP-FUEL INJECTION
130-0780 LINES GP-FUEL INJECTION
S/N 3CS29719-UP
STANDARD FILTER LOCATION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
130-0782 LINES GP-FUEL INJECTION
130-0782 LINES GP-FUEL INJECTION
S/N 3CS769-12530
STERLING
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
130-0782 LINES GP-FUEL INJECTION
130-0782 LINES GP-FUEL INJECTION
S/N 3CS12531-UP
STERLING
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
130-0784 LINES GP-FUEL INJECTION
130-0784 LINES GP-FUEL INJECTION
S/N 3CS705-715; 3CS717-30296
HIGH MOUNT FILTER-PETERBILT
FOR USE WITH @@@@@116-5407@@@@@
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
130-0784 LINES GP-FUEL INJECTION
130-0784 LINES GP-FUEL INJECTION
S/N 3CS13118-29190; 3CS29292-UP
HIGH MOUNT FILTER-PETERBILT
FOR USE WITH @@@@@116-5407@@@@@
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
165-0627 LINES GP-FUEL INJECTION
165-0627 LINES GP-FUEL INJECTION
S/N 3CS729-12539
NAVISTAR-LOW SIDE CLEARANCE
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
165-0627 LINES GP-FUEL INJECTION
165-0627 LINES GP-FUEL INJECTION
S/N 3CS12540-29910
NAVISTAR-LOW SIDE CLEARANCE
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
165-0628 LINES GP-FUEL INJECTION
165-0628 LINES GP-FUEL INJECTION
S/N 3CS993-12529
STEEL BRAIDED FUEL LINES
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
165-0628 LINES GP-FUEL INJECTION
165-0628 LINES GP-FUEL INJECTION
S/N 3CS12530-29190
STEEL BRAIDED FUEL LINES
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
165-0629 LINES GP-FUEL INJECTION
165-0629 LINES GP-FUEL INJECTION
S/N 3CS1554-4508; 3CS9592-13578
FOR USE WITH REMOTE FUEL FILTER-750MM LINES
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
165-0629 LINES GP-FUEL INJECTION
165-0629 LINES GP-FUEL INJECTION
S/N 3CS13579-18371
FOR USE WITH REMOTE FUEL FILTER-750MM LINES
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
165-0630 LINES GP-FUEL INJECTION
165-0630 LINES GP-FUEL INJECTION
S/N 3CS742-13578
PROVIDES LINES 1083MM IN LENGTH AND BASE FOR REMOTE FUEL FILTER LOCATION
FOR USE WITH 4 CYLINDER AIR COMPRESSOR
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
165-0630 LINES GP-FUEL INJECTION
165-0630 LINES GP-FUEL INJECTION
S/N 3CS13579-29190
PROVIDES LINES 1083MM IN LENGTH AND BASE FOR REMOTE FUEL FILTER LOCATION
FOR USE WITH 4 CYLINDER AIR COMPRESSOR
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
166-6363 LINES GP-FUEL INJECTION
166-6363 LINES GP-FUEL INJECTION
S/N 3CS3530-27172
NO SECONDARY FUEL FILTER BASE
CANNOT BE USED WITH FUEL FILTER OR PRIMING PUMP
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
187-3317 LINES GP-FUEL INJECTION
187-3317 LINES GP-FUEL INJECTION
S/N 3CS18376-19670; 3CS20219-27172
FOR USE WITH @@@@@189-9148@@@@@
ALSO AN ATTACHMENT
PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-0801 PUMP GP-FUEL INJECTION
130-0801 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-0801 PUMP GP-FUEL INJECTION
130-0801 PUMP GP-FUEL INJECTION
S/N 3CS29309-UP
WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR
WIRING GP-UNIT INJECTOR
257-4183 WIRING GP-UNIT INJECTOR
257-4183 WIRING GP-UNIT INJECTOR
FOR USE AS SERVICE REPAIR FOR INJECTOR HARNESSES WITH THE 7E-6513 CONNECTOR
FIELD INSTALLATION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
116-5411 PUMP GP-FUEL PRIMING
116-5411 PUMP GP-FUEL PRIMING -HAND
S/N 3CS704-715; 3CS717-12330
FOR USE WITH @@@@@130-0780@@@@@
ALSO AN ATTACHMENT
PUMP GP-FUEL PRIMING
116-5411 PUMP GP-FUEL PRIMING
116-5411 PUMP GP-FUEL PRIMING -HAND
S/N 3CS12331-UP
FOR USE WITH @@@@@130-0780@@@@@
ALSO AN ATTACHMENT
PUMP GP-FUEL PRIMING
116-5412 PUMP GP-FUEL PRIMING
116-5412 PUMP GP-FUEL PRIMING
S/N 3CS1-704; 3CS750-12330
FORWARD MOUNT
FOR USE WITH @@@@@130-0780@@@@@
ALSO AN ATTACHMENT
PUMP GP-FUEL PRIMING
116-5412 PUMP GP-FUEL PRIMING
116-5412 PUMP GP-FUEL PRIMING
S/N 3CS12331-UP
FORWARD MOUNT
FOR USE WITH @@@@@130-0780@@@@@
ALSO AN ATTACHMENT
PUMP GP-FUEL TRANSFER
PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
S/N 3CS1-19477
PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
S/N 3CS19478-UP
SEPARATOR GP-WATER
FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
S/N 3CS12372-UP
ALSO AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
FIELD REPLACEMENT FOR @@@@@8N-0940@@@@@
FIELD INSTALLATION
SEPARATOR GP-WATER
8N-0940 SEPARATOR GP-WATER
8N-0940 SEPARATOR GP-WATER
PRIMARY 10 MICRON FILTER/WATER SEPARATOR, USE ON SUCTION SIDE OF TRANSFER PUMP WITH 1/2 INCH HOSE
FIELD REPLACEMENT ORDER @@@@@459-3810@@@@@
AN ATTACHMENT

Information:

(For parts list, see above)

Truck Engine News
A New Check Valve is Available for the Fuel Filter Base {1262}
2003/06/01
Improved Seal on Fuel Filter {1261}
2005/10/01
A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Truck Engines {1261, 1274, 5067}
2010/04/15
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Primary Filter/Water Separator - Drain
3406E, C-10, C-12, C-15, C-16 Truck Engines
Fuel System Primary Filter - Clean/Replace
3406E, C-10, C-12, C-15, C-16 Truck Engines
Fuel System Secondary Filter - Replace
3406E, C-10, C-12, C-15, C-16 Truck Engines
Special Instruction
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter Base - Remove and Install
C-10 and C-12 On-Highway Engines
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Truck Engine News
A New Abrasion Resistant Fuel Line is Now Used {1274}
2004/11/01
A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Truck Engines {1261, 1274, 5067}
2010/04/15
Special Instruction
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
Specifications
Fuel Lines
C-10 and C-12 Truck Engines
Disassembly and Assembly
Fuel Manifold - Remove
C-10 and C-12 On-Highway Engines
Fuel Manifold - Install
C-10 and C-12 On-Highway Engines
Truck Engine News
The Procedure for the Removal of the Electronic Unit Injector has Changed {1290}
2004/04/01
The Procedure for the Installation of the Electronic Unit Injector has Changed {1290}
2004/04/01
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2009/10/29
Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/01
Technical Information Bulletin
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Truck Engine News
The Procedure For Tightening The Clamping Bolt For The Unit Injector Has Changed {1250, 1290}
2002/10/01
Operation and Maintenance Manual
Hoses and Clamps - Inspect/Replace
3406E, C-10, C-12, C-15, C-16 Truck Engines
Fuel System - Prime
3406E, C-10, C-12, C-15, C-16 Truck Engines
Truck Engine News
Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
2006/04/01
Torque Increased for Nuts on Fuel Injector Wiring Harness {1290}
1999/12/01
Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254}
2003/11/01
The Procedure for the Removal of the Electronic Unit Injector has Changed {1290}
2004/04/01
The Procedure for the Installation of the Electronic Unit Injector has Changed {1290}
2004/04/01
Replace the Fuel Injector Hold-Down Bolt When You Service Electronic Unit Injectors {1290}
2004/06/01
Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
2006/04/01
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2009/10/29
Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Procedure to Program Injector Trim Files When Injector Trim Files Are Missing in the ECM of Certain Engines {1290, 1920}
2012/09/17
Cat<SUP>&reg;</SUP> Reman Is Announcing an Appearance Change to the EI550 Classic, Bridge, and ACERT Electronic Unit Injectors for Certain Truck Engines {1290}
2015/06/26
Operation and Maintenance Manual
Electronic Unit Injector - Inspect/Adjust
3406E, C-10, C-12, C-15, C-16 Truck Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES
THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-CSARL
THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES
THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-Truck/Ag/Marine
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES
THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
Technical Information Bulletin
Inspection Of The Unit Injector Lifter Assembly
Inspection Of The Unit Injector Lifter Assembly
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
Specifications
Electronic Unit Injector Wiring
C-10 and C-12 Truck Engines
Electronic Unit Injector Mechanism
C-10 and C-12 Truck Engines
Electronic Unit Injector
C-10 and C-12 Truck Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Information Release Memo
REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND ON-HIGHWAY TRUCK APPLICATIONS-ADDENDUM
REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND ON-HIGHWAY TRUCK APPLICATIONS-ADDENDUM
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTOR ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN FUEL INJECTORS FROM DEALERS PARTS STOCK
Testing and Adjusting
Electronic Unit Injector - Adjust
C-10 and C-12 Truck Engines
Electronic Unit Injector - Test
C-10 and C-12 Truck Engines
Troubleshooting
Injector Solenoid Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
0001-11 Cylinder #1 Injector current fault (72)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
0002-11 Cylinder #2 Injector current fault (72)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
0003-11 Cylinder #3 Injector current fault (73)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
0004-11 Cylinder #4 Injector current fault (73)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
0005-11 Cylinder #5 Injector current fault (74)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
0006-11 Cylinder #6 Injector current fault (74)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
Injector Code - Calibrate
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
Disassembly and Assembly
Electronic Unit Injector - Remove
C-10 and C-12 On-Highway Engines
Electronic Unit Injector - Install
C-10 and C-12 On-Highway Engines
Service Magazine
Replace the Fuel Injector Hold-Down Bolt When You Service Electronic Unit Injectors {1251, 1290}
2004/06/07
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/08
Operation and Maintenance Manual
Fuel System - Prime
3406E, C-10, C-12, C-15, C-16 Truck Engines
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Fuel Priming Pump
C-10 and C-12 Truck Engines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Fuel System - Prime
C-10 and C-12 Truck Engines
Disassembly and Assembly
Fuel Priming Pump - Remove and Install
C-10 and C-12 On-Highway Engines
Service Magazine
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Truck Engine News
A New Mounting Gasket for the Fuel Transfer Pump is Available {1256, 1256}
2004/10/01
A New Fuel Transfer Pump Has Been Released {1256}
2005/05/01
A New Fuel Transfer Pump Is Now Available for Certain Truck Engines {1256}
2014/10/03
Specifications
Fuel Transfer Pump
C-10 and C-12 Truck Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Testing and Adjusting
Fuel System Pressure - Test
C-10 and C-12 Truck Engines
Disassembly and Assembly
Fuel Transfer Pump - Remove
C-10 and C-12 On-Highway Engines
Fuel Transfer Pump - Install
C-10 and C-12 On-Highway Engines
Operation and Maintenance Manual
Fuel Tank Water and Sediment - Drain
3406E, C-10, C-12, C-15, C-16 Truck Engines
Fuel System Primary Filter/Water Separator - Drain
3406E, C-10, C-12, C-15, C-16 Truck Engines
Fuel System Water Separator - Drain
3406E, C-10, C-12, C-15, C-16 Truck Engines
Fuel Tank Water and Sediment - Drain
3406E, C-10, C-12, C-15, C-16 Truck Engines
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Truck Engine News
A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Truck Engines {1261, 1274, 5067}
2010/04/15
Special Instruction
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}
A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.