BASIC ENGINE
BELT TIGHTENER GPSERPENTINE/V-BELTS
HOUSING GP-FRONT
CAMSHAFT GP
BASIC ENGINE
BELT TIGHTENER GP
#SEBP26032230
190-3973: BELT TENSIONER GP
190-3973 BELT TENSIONER GP
S/N 3CS24632-24906
PROVIDES PAD MOUNTED ALTERNATOR BRACKET AND UNFLANGED 370IN/LB BELT TIGHTENER
FOR USE WITH FAN CENTER HEIGHTS LESS THAN 17IN
ALSO AN ATTACHMENT
S/N 3CS24632-24906
PROVIDES PAD MOUNTED ALTERNATOR BRACKET AND UNFLANGED 370IN/LB BELT TIGHTENER
FOR USE WITH FAN CENTER HEIGHTS LESS THAN 17IN
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-7023 C | [1] | PULLEY AS-IDLER | |
| 1A. | 151-2898 C | [1] | SPACER (10.4X38.1X20-MM THK) | |
| 1B. | 166-6358 C | [1] | COVER-DUST | |
| 1C. | 151-2900 CM | [1] | BOLT (M10X1.5X54.25-MM) | |
| 2. | 169-4657 | [1] | BRACKET | |
| 3. | 173-1498 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 3A. | 151-2900 M | [1] | BOLT (M10X1.5X54.25-MM) | |
| 3B. | 173-1500 | [1] | SPACER (10.4X45.1X1.8-MM THK) | |
| 3C. | 166-6358 | [1] | COVER-DUST | |
| 4. | 190-0649 | [1] | BELT TENSIONER | |
| 5. | 3E-4353 | [3] | WASHER-HARD (11X25X3-MM THK) | |
| 6. | 6V-1820 M | [3] | BOLT (M10X1.5X30-MM) | |
| 7. | 6V-3822 M | [2] | BOLT (M10X1.5X35-MM) | |
| 8. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 9. | 8T-0643 M | [3] | BOLT (M10X1.5X80-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP26032231
190-3973: BELT TENSIONER GP
190-3973 BELT TENSIONER GP
S/N 3CS24907-29230
PROVIDES PAD MOUNTED ALTERNATOR BRACKET AND UNFLANGED 370IN/LB BELT TIGHTENER
FOR USE WITH FAN CENTER HEIGHTS LESS THAN 17IN
ALSO AN ATTACHMENT
S/N 3CS24907-29230
PROVIDES PAD MOUNTED ALTERNATOR BRACKET AND UNFLANGED 370IN/LB BELT TIGHTENER
FOR USE WITH FAN CENTER HEIGHTS LESS THAN 17IN
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 169-4657 | [1] | BRACKET | |
| 2. | 173-1498 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 2A. | 151-2900 M | [1] | BOLT (M10X1.5X54.25-MM) | |
| 2B. | 166-6358 | [1] | COVER-DUST | |
| 2C. | 173-1500 | [1] | SPACER (10.4X45.1X1.8-MM THK) | |
| 3. | 190-0649 | [1] | BELT TENSIONER | |
| 4. | 3E-4353 | [3] | WASHER-HARD (11X25X3-MM THK) | |
| 5. | 6V-1820 M | [3] | BOLT (M10X1.5X30-MM) | |
| 6. | 6V-3822 M | [2] | BOLT (M10X1.5X35-MM) | |
| 7. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 8. | 8T-0643 M | [3] | BOLT (M10X1.5X80-MM) | |
| M | METRIC PART | |||
#SEBP26032232
211-7877: BELT TENSIONER GP
211-7877 BELT TENSIONER GP
S/N 3CS24667-29190
PROVIDES AUTOMATIC BELT TIGHTENER AND FRONT MOUNTING PLATE
ALSO AN ATTACHMENT
S/N 3CS24667-29190
PROVIDES AUTOMATIC BELT TIGHTENER AND FRONT MOUNTING PLATE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6K-0806 | [1] | STRAP-CABLE | |
| 2. | 9Y-5631 | [2] | SPACER (13X26X89.9-MM THK) | |
| 3. | 131-4179 | [1] | SPACER | |
| 4. | 142-2011 Y | [2] | PULLEY GP-IDLER | |
| 5. | 193-7732 | [1] | BELT TENSIONER | |
| 6. | 211-7875 | [1] | BRACKET | |
| 7. | 211-7876 | [1] | SPACER | |
| 8. | 211-7878 | [1] | BELT-SERPENTINE (ALTERNATOR) | |
| 9. | 5P-8245 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 11. | 6V-8004 M | [2] | BOLT (M12X1.75X120-MM) | |
| 12. | 6V-8149 M | [2] | NUT (M12X1.75-THD) | |
| 13. | 6V-8214 M | [1] | BOLT (M6X1X20-MM) | |
| 14. | 7X-0909 M | [1] | BOLT (M12X1.75X140-MM) | |
| 15. | 8T-0644 M | [1] | BOLT (M10X1.5X90-MM) | |
| 16. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26032233
220-1173: BELT TENSIONER GP
220-1173 BELT TENSIONER GP
S/N 3CS25728-UP
FOR USE WITH FAN CENTERS FROM 11 INCHES TO 20.375 INCHES WHEN ADDITIONAL BELT WRAP IS REQUIRED
ALSO AN ATTACHMENT
S/N 3CS25728-UP
FOR USE WITH FAN CENTERS FROM 11 INCHES TO 20.375 INCHES WHEN ADDITIONAL BELT WRAP IS REQUIRED
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-7023 | [1] | PULLEY AS-IDLER | |
| 1A. | 151-2898 | [1] | SPACER (10.4X38.1X20-MM THK) | |
| 1B. | 151-2900 M | [1] | BOLT (M10X1.5X54.25-MM) | |
| 1C. | 166-6358 | [1] | COVER-DUST | |
| 2. | 169-4657 | [1] | BRACKET | |
| 3. | 173-1498 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 3A. | 151-2900 M | [1] | BOLT (M10X1.5X54.25-MM) | |
| 3B. | 166-6358 | [1] | COVER-DUST | |
| 3C. | 173-1500 | [1] | SPACER (10.4X45.1X1.8-MM THK) | |
| 4. | 190-0649 | [1] | BELT TENSIONER | |
| 5. | 3E-4353 | [3] | WASHER-HARD (11X25X3-MM THK) | |
| 6. | 6V-1820 M | [3] | BOLT (M10X1.5X30-MM) | |
| 7. | 6V-3822 M | [2] | BOLT (M10X1.5X35-MM) | |
| 8. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 9. | 8T-0643 M | [3] | BOLT (M10X1.5X80-MM) | |
| M | METRIC PART | |||
#SEBP26032234
132-9809: BELT TIGHTENER GP
132-9809 BELT TIGHTENER GP
S/N 3CS719-24666
MANUAL TENSIONER W/FRONT MOUNTING PLATE
CANNOT BE USED WITH @@@@@117-2694@@@@@, @@@@@128-0325@@@@@
ALSO AN ATTACHMENT
S/N 3CS719-24666
MANUAL TENSIONER W/FRONT MOUNTING PLATE
CANNOT BE USED WITH @@@@@117-2694@@@@@, @@@@@128-0325@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 131-4172 | [1] | BRACKET AS | |
| 2. | 131-4174 | [1] | PULLEY-TIGHTENER | |
| 3. | 7X-0909 M | [1] | BOLT (M12X1.75X140-MM) | |
| 4. | 6V-8004 M | [2] | BOLT (M12X1.75X120-MM) | |
| 5. | 5P-8245 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 6V-8149 M | [2] | NUT (M12X1.75-THD) | |
| 7. | 131-6673 M | [2] | BOLT-SPECIAL | |
| 8. | 131-4177 | [1] | NUT | |
| 9. | 9Y-5631 | [2] | SPACER (13X26X89.9-MM THK) | |
| 10. | 133-6985 | [1] | SPACER AS | |
| 11. | 131-4179 | [1] | SPACER | |
| 12. | 124-7791 | [1] | COVER-DUST | |
| 13. | 128-5685 | [1] | PULLEY AS-IDLER | |
| 14. | 133-0942 | [1] | SPACER | |
| 15. | 2Y-5829 M | [2] | NUT (M10X1.5-THD) | |
| 16. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| M | METRIC PART | |||
#SEBP26032235
277-4586: BELT-SERPENTINE
277-4586 BELT-SERPENTINE
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP26032236
124-2650: BRACKET GP-SUPPORT
124-2650 BRACKET GP-SUPPORT -REFRIGERANT COMPRESSOR
S/N 3CS704-704; 3CS717-UP
FOR USE WITH @@@@@138-2539@@@@@
ALSO AN ATTACHMENT
S/N 3CS704-704; 3CS717-UP
FOR USE WITH @@@@@138-2539@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26032237
138-2545: BRACKET GP-SUPPORT
138-2545 BRACKET GP-SUPPORT -REFRIGERANT COMPRESSOR
PROVIDES "L" BRACKET FOR STIFFENING, WITH RADIATOR SUPPORT HOLES-PETERBILT
ALSO AN ATTACHMENT
PROVIDES "L" BRACKET FOR STIFFENING, WITH RADIATOR SUPPORT HOLES-PETERBILT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26032238
138-2546: BRACKET GP-SUPPORT
138-2546 BRACKET GP-SUPPORT -REFRIGERANT COMPRESSOR
S/N 3CS725-UP
PROVIDES 2 BOLTS FOR FRONT HOUSING TO "L" BRACKET HOLES
FOR USE WITH @@@@@124-2650@@@@@, @@@@@132-9842@@@@@, @@@@@132-9847@@@@@, @@@@@124-2646@@@@@, @@@@@142-2016@@@@@, @@@@@148-1986@@@@@
ALSO AN ATTACHMENT
S/N 3CS725-UP
PROVIDES 2 BOLTS FOR FRONT HOUSING TO "L" BRACKET HOLES
FOR USE WITH @@@@@124-2650@@@@@, @@@@@132-9842@@@@@, @@@@@132-9847@@@@@, @@@@@124-2646@@@@@, @@@@@142-2016@@@@@, @@@@@148-1986@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26032239
131-6668: CAMSHAFT GP
131-6668 CAMSHAFT GP
For full view, you need register
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-5217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 2. | 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 3. | 178-3643 | [1] | PIN-THRUST | |
| 4. | 133-7068 | [1] | GASKET-CAMSHAFT COVER | |
| 5. | 118-0459 | [1] | COVER | |
| 6. | 136-4339 | [1] | CAMSHAFT AS | |
| 7. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 8. | 133-7100 | [1] | GEAR-CAMSHAFT DRIVE (96-TEETH)(96 TEETH) | |
| 9. | 128-0411 | [1] | JOURNAL | |
| 10. | 9X-2097 M | [3] | STUD (M8X1.25-THD) | |
| 11. | 4K-9841 | [1] | WASHER (0.406X0.75X0.064-IN THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Information:
BASIC ENGINE
BELT TIGHTENER GP
Truck Engine News
Operation and Maintenance Manual
Service Letter-NACD
Product Support Program For Installing A New Idler Pulley Assembly On Certain 3406E, C-10, And C-12 Engines
Product Support Program For Installing A New Idler Pulley Assembly On Certain 3406E, C-10, And C-12 Engines
Product Support Program For Installing A New Idler Pulley Assembly On Certain 3406E, C-10, And C-12 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Service Letter-China
Product Support Program For Installing A New Idler Pulley Assembly On Certain 3406E, C-10, And C-12 Engines
Product Support Program For Installing A New Idler Pulley Assembly On Certain 3406E, C-10, And C-12 Engines
Product Support Program For Installing A New Idler Pulley Assembly On Certain 3406E, C-10, And C-12 Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
