162-8540 STEERING COLUMN GP-ADJUSTABLE S/N 4PS1-458 PART OF 137-5843 CONTROL GP-STEERING D250E II ARTICULATED TRUCK

Part No	Qty	Parts name
162-8552	[1]	ADAPTER AS
185-3886	[1]	CLAMP AS-CABLE
162-8551	[2]	JOINT AS-UNIVERSAL
169-3261 M	[1]	NUT (M18X1.5-THD)

		AVAILABLE REPAIR KIT(S):
162-8545	[1]	SHAFT
162-8550	[1]	KIT-GAS STRUT
189-9368	[1]	KIT-COLUMN
161-1333	[1]	KIT-HORN
M		METRIC PART

#SEBP26080381

189-9365: STEERING COLUMN GP-ADJUSTABLE

STEERING COLUMN GP-ADJUSTABLE

189-9365 STEERING COLUMN GP-ADJUSTABLE
S/N 4PS459-UP
PART OF 137-5843 CONTROL GP-STEERING

i01442892 SEBP2608

1899365 STEERING COLUMN GP-ADJUSTABLE Parts scheme

For full view, you need register

Parts for your D250E II ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	252-7981	[1]	ADAPTER AS
2.	162-8551	[2]	JOINT AS-UNIVERSAL
			(EACH INCLUDES)
	099-3649 M	[2]	BOLT (M8X1.25X40-MM)
	131-3540 M	[2]	LOCKNUT (M8X1.25-THD)
3.	332-7047	[1]	KIT-GAS STRUT (STEERING COLUMN TILT)
			(INCLUDES STRUT, BOLTS, NUTS & SPACERS)
4.	300-2960	[1]	COLUMN AS
5.	191-3700	[1]	KIT-TILT LEVER (STEERING COLUMN)
			(INCLUDES CONTROL AS, SCREWS & CLAMP AS)
6.	252-8054	[1]	KIT-CONTACT (STEERING COLUMN TILT)
			(INCLUDES HORN CONTACT AS & SCREWS)
7.	162-8545	[1]	SHAFT
8.	6V-8227 M	[1]	NUT (M18X1.5-THD)
9.	185-3886	[1]	CLAMP AS-CABLE
10.	323-3467	[1]	KIT-PIVOT (STEERING COLUMN)
			(INCLUDES BUSHINGS & PINS)
11.	201-5121	[1]	KIT-SHAFT (STEERING COLUMN)
			(INCLUDES UPPER SHAFT, WASHERS, SPRING, PIN & HORN CONTACT)
12.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
13.	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
14.	9G-3695	[1]	PLUG-SEAL
	M		METRIC PART

#SEBP26080382

170-1601: VALVE GP-SIG & PRESS REDUCING

VALVE GP-SIG & PRESS REDUCING

170-1601 VALVE GP-SIG & PRESS REDUCING
S/N 4PS1-UP
PART OF 174-2097 LINES GP-STEERING

i01538677 SEBP2608

1701601 VALVE GP-SIG & PRESS REDUCING Parts scheme

For full view, you need register

Parts for your D250E II ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3K-0360	[1]	SEAL-O-RING
2.	2M-9780	[2]	SEAL-O-RING
3.	7M-8485	[1]	SEAL-O-RING

#SEBP26080383

137-1881: VALVE GP-STEERING

VALVE GP-STEERING

137-1881 VALVE GP-STEERING
S/N 4PS1-UP
PART OF 137-4635, 174-2097 LINES GP-STEERING

i00563023 SEBP2608

For full view, you need register

Parts for your D250E II ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	141-1233	[1]	VALVE GP-CHECK
2.	134-9911	[1]	VALVE-CHECK

#SEBP26080384

141-5502: ACTUATOR GP-PILOT CONTROL

ACTUATOR GP-PILOT CONTROL

141-5502 ACTUATOR GP-PILOT CONTROL
S/N 4PS1-UP
PART OF 133-8900, 174-0018 VALVE GP-HOIST CONTROL

i00570329 SEBP2608

1415502 ACTUATOR GP-PILOT CONTROL Parts scheme

For full view, you need register

Parts for your D250E II ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5S-6980	[1]	RING-RETAINING
2.	366-4695	[3]	PLUG AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	360-3679	[1]	PLUG-CONNECTOR (9/16-18-THD)
3.	137-4756	[1]	SPRING
4.	141-5497	[1]	SPRING
5.	141-5498	[1]	SPRING
6.	159-8402	[1]	SPRING
7.	077-3241	[1]	SEAL-O-RING
8.	486-7563	[1]	SOLENOID AS (PILOT CONTROL ACTUATOR)
	1S-9593	[2]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	129-3174 M	[4]	BOLT-SOCKET HEAD (M4X0.7X60-MM)
9.	367-6001	[5]	PLUG AS
			(EACH INCLUDES)
	4J-7533	[1]	SEAL-O-RING
	360-3675	[1]	PLUG
10.	142-2864	[1]	RETAINER

	107-3198 FM	[4]	BOLT (M4X0.7X65-MM)
	096-6166 F	[12]	WASHER-HARD (4.5X9X1-MM THK)
	F		NOT SHOWN
	M		METRIC PART

#SEBP26080385

141-5503: ACTUATOR GP-PILOT CONTROL

ACTUATOR GP-PILOT CONTROL

141-5503 ACTUATOR GP-PILOT CONTROL
S/N 4PS1-UP
PART OF 133-8900, 174-0018 VALVE GP-HOIST CONTROL

i00579492 SEBP2608

1415503 ACTUATOR GP-PILOT CONTROL Parts scheme

For full view, you need register

Parts for your D250E II ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5S-6980	[1]	RING-RETAINING
2.	367-6001	[5]	PLUG AS
			(EACH INCLUDES)
	4J-7533	[1]	SEAL-O-RING
	360-3675	[1]	PLUG
3.	126-7654	[1]	SPACER (29X36X7-MM THK)
4.	137-4756	[1]	SPRING
5.	141-5497	[1]	SPRING
6.	141-5498	[1]	SPRING (OUTER)
7.	141-5501	[1]	SPRING (INNER)
8.	077-3241	[1]	SEAL-O-RING
9.	486-7563	[1]	SOLENOID AS (PILOT CONTROL ACTUATOR)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	1S-9593	[2]	STRAP-CABLE
	129-3174 M	[4]	BOLT-SOCKET HEAD (M4X0.7X60-MM)
11.	142-2864	[1]	RETAINER
12.	366-4695	[3]	PLUG AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	360-3679	[1]	PLUG-CONNECTOR (9/16-18-THD)

	107-3198 FM	[4]	BOLT (M4X0.7X65-MM)
	096-6166 F	[12]	WASHER-HARD (4.5X9X1-MM THK)

			AVAILABLE REPAIR KIT(S):
	204-1320	[1]	KIT-RETAINING RING
			(INCLUDES RETAINING RINGS)
	F		NOT SHOWN
	M		METRIC PART

#SEBP26080386

137-4645: CYLINDER & MTG GP-HOIST

CYLINDER & MTG GP-HOIST

137-4645 CYLINDER & MTG GP-HOIST
S/N 4PS1-UP
PART OF 134-9384 HYDRAULIC AR

i01073479 SEBP2608

1374645 CYLINDER & MTG GP-HOIST Parts scheme

For full view, you need register

Parts for your D250E II ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2U-9204	[1]	SPACER (17X25.4X11.5-MM THK)
2.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
3.	5U-7151	[1]	CAP-GREASE
4.	6V-0406	[1]	SEAL-BONDED
5.	124-6696	[1]	ADAPTER
6.	127-1736	[1]	PIN AS
7.	141-4335 Y	[1]	CYLINDER GP-HOIST
8.	150-6553	[1]	PIN
9.	164-8408 B	[2]	PLATE-SPACER
10.	166-7871	[2]	WASHER-RUBBER (52X100X8-MM THK)
11.	8C-2949	[1]	RING-RETAINING
12.	8T-4167	[2]	WASHER-HARD (26X44X4-MM THK)
13.	8T-4779 M	[1]	BOLT (M16X2X35-MM)
14.	8T-5878 M	[2]	BOLT (M24X3X80-MM)
15.	9X-8257	[1]	WASHER (17.5X30X3.5-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP26080387

137-9623: CYLINDER & MTG GP-TAILGATE

CYLINDER & MTG GP-TAILGATE

137-9623 CYLINDER & MTG GP-TAILGATE
S/N 4PS1-UP
PART OF 137-5656 TAILGATE AR
AN ATTACHMENT

i01073640 SEBP2608

1379623 CYLINDER & MTG GP-TAILGATE Parts scheme

For full view, you need register

Parts for your D250E II ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5U-5605	[2]	WASHER (26X70X10-MM THK)
2.	151-2611 Y	[1]	CYLINDER GP-TAILGATE
3.	6U-2193	[1]	PIN-CENTER
4.	6U-2270 B	[5]	SHIM (1.6-MM THK)
5.	6U-2271 B	[5]	SHIM (3-MM THK)
6.	6U-2272 B	[5]	SHIM (5-MM THK)
7.	6V-7676 M	[1]	NUT (M24X3-THD)
8.	7U-6339	[1]	MOUNTING AS-CYLINDER
9.	7X-2555 M	[4]	BOLT (M16X2X80-MM)
10.	7X-2578 M	[1]	BOLT (M24X3X200-MM)
11.	8T-4132 M	[4]	NUT (M16X2-THD)
12.	8T-4167	[1]	WASHER-HARD (26X44X4-MM THK)
13.	9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
14.	155-7687	[1]	BRACKET-SUPPORT
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP26080388

141-4335: CYLINDER GP-HOIST

CYLINDER GP-HOIST

141-4335 CYLINDER GP-HOIST
S/N 4PS1-UP
114.3MM (4.5 IN) BORE X 2332MM (91.81 IN) STROKE
PART OF 137-4645 CYLINDER & MTG GP-HOIST

i00571532 SEBP2608

For full view, you need register

Parts for your D250E II ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
2.	141-4336	[1]	CYLINDER AS
	1J-6472	[2]	RING-RETAINING
	066-5815	[1]	BEARING-SELF-ALIGNING
		[1]	CAP
3.	141-4337	[1]	HEAD
4.	141-4338	[1]	PISTON
5.	141-4339	[1]	ROD AS
	1J-6472	[2]	RING-RETAINING
	066-5815	[1]	BEARING-SELF-ALIGNING
6.	225-3284	[1]	SEAL-WIPER
7.	167-2208	[1]	SEAL AS-BUFFER
8.	167-2319	[1]	SEAL-U-CUP
9.	175-7902 J	[1]	SEAL-O-RING
10.	1K-7095 J	[1]	RING-BACKUP
11.	2U-2576	[1]	NUT (1-1/2-6-THD)
12.	3S-6162	[1]	WASHER-HARD (40.5X67X6-MM THK)
13.	4J-3745 J	[2]	RING-WEAR
14.	8T-7584 J	[1]	RING-WEAR
15.	9X-7269 J	[1]	SEAL AS

			AVAILABLE REPAIR KIT(S):
	445-9451 J	[1]	KIT-HYD CYLINDER SEAL
			(ALSO INCLUDES SEAL AS & SEALS)
			FOR USE WITH REHS1392
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP26080389

151-2611: CYLINDER GP-TAILGATE

CYLINDER GP-TAILGATE

151-2611 CYLINDER GP-TAILGATE
S/N 4PS1-UP
76.2-MM (3-IN) BORE X 350-MM (13.8-IN) STROKE
PART OF 137-9623 CYLINDER & MTG GP-TAILGATE
AN ATTACHMENT

i00752892 SEBP2608

1512611 CYLINDER GP-TAILGATE Parts scheme

For full view, you need register

Parts for your D250E II ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8488	[1]	FITTING-GREASE (1/8-27 PTF)
2.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
3.	5U-6605	[1]	PLUG (GRUB)
4.	151-7033	[1]	CYLINDER AS
	4D-1736	[1]	RING-RETAINING
	6U-7417	[1]	RING-CUSHION
5.	151-7037	[1]	PISTON
6.	151-7038	[1]	HEAD
7.	193-0676	[1]	ROD AS
8.	289-2935	[1]	SEAL AS-BUFFER
9.	289-2946	[1]	SEAL-U-CUP
10.	308-1845	[1]	SEAL-WIPER
11.	1H-7339	[1]	SEAL-O-RING
12.	2W-1145	[4]	RING-RETAINING (INTERNAL)
13.	4T-5613 J	[1]	RING-WEAR
14.	6J-1972 J	[1]	SEAL AS
15.	6J-5731 J	[1]	RING-BACKUP
16.	6J-5733 J	[1]	RING-WEAR
17.	6V-5002	[2]	BEARING-ALIGNING
18.	9F-2247	[1]	PLUG-PIPE

			AVAILABLE REPAIR KIT(S):
	238-4462 J	[1]	KIT-SEAL (LIFT CYLINDER)
			(INCLUDES O RING SEAL, U CUP SEAL & SEAL AS BUFFER)
	J		KIT MARKED J SERVICES PART(S) MARKED J