AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-8794 DRIVE GP-GOV & TRANSFER PUMP S/N 4TF18221-UP PART OF 130-7323 GOVERNOR GP-UNIT INJECTOR M320


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
GOVERNOR GP
PUMP GP-REFUELING
LINES GP-FUEL

EXCAVATOR M320 EXCAVATOR 6WL
 M320 Excavator 6WL00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2612 M320 6WL   (2015)

FUEL SYSTEM

GOVERNOR GP
ACTUATOR GP-GOVERNOR
112-7593 ACTUATOR GP-GOVERNOR
ACTUATOR GP-GOVERNOR
152-0197 ACTUATOR GP-GOVERNOR
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
119-2903 GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
118-0687 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7323 GOVERNOR GP-UNIT INJECTOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
 

#SEBP26120110
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 4TF18221-UP
PART OF 130-7323 GOVERNOR GP-UNIT INJECTOR
i00772966 SEBP2612
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your M320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
  7S-5005 [2] DOWEL  
  7S-6798 [1] SEAL-LIP TYPE  
  9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUTOFF  
3A. 9X-8902 M [4] BOLT-SOCKET HEAD (M3X0.5X8-MM)  
3B. 4P-9492 [1] BRACKET-SHAFT  
3C. 4P-9493 [1] LEVER-SHUTOFF (SOLENOID)  
3D. 4P-9494 [1] SPRING-SHUTOFF  
3E. 105-0585 [1] LEVER-SHUTOFF (OUTPUT)  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATOR  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

#SEBP26120111
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 4TF18221-UP
PART OF 119-2903 GOVERNOR GP
i00412438 SEBP2612
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your M320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#SEBP26120112
 

119-2903: GOVERNOR GP

119-2903 GOVERNOR GP
S/N 4TF18221-UP
PART OF 118-3600 ENGINE AR
i00519350 SEBP2612
  For full view, you need register

Parts for your M320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  118-0687 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26120113
 

118-0687: GOVERNOR GP-UNIT INJECTOR

118-0687 GOVERNOR GP-UNIT INJECTOR
S/N 4TF18221-UP
PART OF 119-2903 GOVERNOR GP
i00479281 SEBP2612
1180687 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your M320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7323 YC [1] GOVERNOR GP-UNIT INJECTOR  
2. 124-6011 [1] CAM-TORQUE  
3. 7E-9749 SPRING GP-GOVERNOR  
  [1] SPRING-LOW IDLE  
  [1] SPRING  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-5746 [1] CONTROL AS-FUEL RATIO  
  6I-1564 [1] DIAPHRAGM  
  7C-5599 [1] WASHER  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  8T-5447 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26120114
 

130-7323: GOVERNOR GP-UNIT INJECTOR

130-7323 GOVERNOR GP-UNIT INJECTOR
S/N 4TF18221-UP
PART OF 118-0687 GOVERNOR GP-UNIT INJECTOR
i00503625 SEBP2612
1307323 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your M320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 130-7322 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING  
41. 5C-8312 M [1] NUT (M4X0.7-THD)  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 128-4794 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP26120115
 

8U-0876: HOSE GP-REFUELING

8U-0876 HOSE GP-REFUELING
S/N 6WL1-UP
PART OF 111-1929 PUMP GP-FUEL TRANSFER
AN ATTACHMENT
i00427339 SEBP2612
8U0876 HOSE GP-REFUELING Parts scheme
  For full view, you need register

Parts for your M320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-8654 [1] COUPLING  
2. 5W-8655 [1] HOSE AS (SUCTION)  
3. 5W-8656 [1] SCREEN AS (REFUELING)  
4. 5W-8657 [1] COUPLING  
5. 5W-8650 [2] CLAMP-HOSE  
 

#SEBP26120116
 

138-3050: LINES GP-FUEL

138-3050 LINES GP-FUEL
S/N 6WL1-272
PART OF 128-4273 CHASSIS AR
i00570325 SEBP2612
1383050 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your M320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-5259 [1] VALVE AS  
2. 106-0378 I [2] HOSE AS  
3. 121-5625 [1] PLATE AS-HEAT SHIELD  
4. 130-1382 [1] ANGLE  
5. 151-2559 [1] CLAMP (TWIN)  
6. 138-1910 I [1] HOSE AS  
7. 140-1795 [1] PLATE  
8. 140-1965 [1] TUBE AS  
9. 096-0061 B [1] STRAP-CABLE  
10. 1J-9671 [4] SEAL-O-RING  
11. 3J-1907 [3] SEAL-O-RING  
12. 3K-8460 [2] PLUG (1/2-20-THD)  
13. 6V-8397 [8] SEAL-O-RING  
14. 6V-8398 [1] SEAL-O-RING  
15. 6V-8724 [3] ELBOW  
16. 6V-9850 [1] ELBOW  
17. 7X-2536 M [2] BOLT (M8X1.25X14-MM)  
18. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4133 M [2] NUT (M10X1.5-THD)  
20. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
21. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
22. 8T-4971 M [1] BOLT (M6X1X30-MM)  
23. 8T-5043 [2] ADAPTER  
24. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26120117
 

138-3050: LINES GP-FUEL

138-3050 LINES GP-FUEL
S/N 6WL273-UP
PART OF 128-4273 CHASSIS AR
i01014648 SEBP2612
1383050 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your M320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 192-4521 [1] VALVE AS  
2. 106-0378 I [2] HOSE AS  
3. 121-5625 [1] PLATE AS-HEAT SHIELD  
4. 130-1382 [1] ANGLE  
5. 151-2559 [1] CLAMP (TWIN)  
6. 111-6599 I [1] HOSE AS  
7. 140-1795 [1] PLATE  
9. 096-0061 B [1] STRAP-CABLE  
11. 3J-1907 [7] SEAL-O-RING  
12. 9S-4191 [2] PLUG (9/16-18-THD)  
13. 6V-8397 [8] SEAL-O-RING  
15. 6V-8724 [4] ELBOW  
16. 6V-9850 [1] ELBOW  
17. 7X-2536 M [2] BOLT (M8X1.25X14-MM)  
18. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4133 M [2] NUT (M10X1.5-THD)  
20. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
21. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
22. 8T-4971 M [1] BOLT (M6X1X30-MM)  
24. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
25. 8T-0788 [1] ELBOW  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26120118
 

107-8182: LINES GP-FUEL FILTER

107-8182 LINES GP-FUEL FILTER
S/N 4TF35829-41771
PART OF 118-3600 ENGINE AR
i00577264 SEBP2612
1078182 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your M320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-1142 [1] BASE AS  
  112-6523 [1] INSERT-FUEL FILTER (TOP FILTER)  
  [1] INSERT-FUEL FILTER (BOTTOM FILTER)  
2. 6V-1820 CM [4] BOLT (M10X1.5X30-MM)  
3. 8W-6154 CI [1] HOSE AS  
4. 3J-1907 C [10] SEAL-O-RING  
5. 5P-7813 [1] SEAL-O-RING  
6. 8T-0151 [1] ADAPTER  
7. 3N-3252 [1] SPRING  
8. 7E-5189 [1] VALVE AS (FUEL)  
9. 7E-5190 [1] TUBE AS  
10. 8T-7547 CM [2] BOLT (M8X1.25X30-MM)  
11. 5F-7054 [1] SEAL-O-RING  
12. 6V-8397 C [7] SEAL-O-RING  
13. 103-2529 CE [2] HOSE (87.5CM EACH)  
14. 131-5482 I [1] HOSE AS  
15. 1R-0751 C [2] FILTER-FUEL (ADVANCED EFFICIENCY)  
16. 5P-4961 C [4] CLAMP-HOSE  
17. 8M-2773 [6] CLIP (LOOP)  
18. 3S-2093 [2] STRAP-CABLE  
19. 6V-8724 C [3] ELBOW  
20. 003-7764 C [2] END-HOSE  
21. 129-1090 C [2] VALVE-DRAIN  
22. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
23. 3E-4352 C [5] WASHER-HARD (8.8X20.5X2.5-MM THK)  
24. 8M-9024 B [2] WASHER-HARD (10.2X22.5X5-MM THK)  
25. 6V-6317 BM [2] BOLT (M10X1.5X20-MM)  
26. 8C-6869 C [2] CONNECTOR  
27. 5P-4924 C [2] ELBOW  
28. 8T-0788 C [2] ELBOW  
29. 096-9988 CM [2] BOLT (M14X2X30-MM)  
30. 9S-4191 C [2] PLUG (9/16-18-THD)  
31. 7X-0510 C [2] WASHER-HARD (15.5X29X3-MM THK)  
32. 139-6024 C [1] SUPPORT  
33. 6V-9850 [1] ELBOW  
34. 8L-5449 C [1] SPACER (0.375X0.75X0.69-IN THK)  
35. 8T-0276 CM [1] BOLT (M8X1.25X45-MM)  
36. 6K-8178 C [1] CLIP (LOOP)  
37. 6V-3940 CM [1] BOLT (M8X1.25X25-MM)  
38. 4N-0205 [1] SPACER (0.42X0.75X0.6-IN THK)  
39. 6V-5842 M [1] BOLT (M10X1.5X40-MM)  
40. 9W-2641 [1] PLATE  
41. 9M-8406 C [1] CLIP (LOOP)  
42. 6V-5217 CM [1] BOLT (M8X1.25X20-MM)  
43. 090-9434 [1] SPACER (9X20X10-MM THK)  
44. 7X-2459 C [1] ADAPTER-TEE  
45. 6V-3918 M [1] BOLT (M8X1.25X50-MM)  
46. 6V-5839 C [5] WASHER (11X21X2.5-MM THK)  
47. 6V-9829 [1] CAP  
48. 5P-1442 CE HOSE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26120119
 

107-8182: LINES GP-FUEL FILTER

107-8182 LINES GP-FUEL FILTER
S/N 4TF41772-UP
PART OF 118-3600 ENGINE AR
i00817446 SEBP2612
1078182 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your M320 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-1102 CY [1] BASE GP-FUEL FILTER  
2. 6V-1820 M [4] BOLT (M10X1.5X30-MM)  
3. 8W-6154 I [1] HOSE AS  
4. 3J-1907 [10] SEAL-O-RING  
5. 5P-7813 [1] SEAL-O-RING  
6. 8T-0151 [1] ADAPTER  
7. 3N-3252 [1] SPRING  
8. 7E-5189 [1] VALVE AS (FUEL)  
9. 7E-5190 [1] TUBE AS  
10. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
11. 5F-7054 [1] SEAL-O-RING  
12. 6V-8397 [7] SEAL-O-RING  
13. 103-2529 E [2] HOSE (87.5CM EACH)  
14. 131-5482 I [1] HOSE AS  
15. 1R-0751 [2] FILTER-FUEL (ADVANCED EFFICIENCY)  
16. 5P-4961 [4] CLAMP-HOSE  
17. 8M-2773 [6] CLIP (LOOP)  
18. 3S-2093 [2] STRAP-CABLE  
19. 6V-8724 [3] ELBOW  
20. 003-7764 [2] END-HOSE  
21. 129-1090 [2] VALVE-DRAIN  
22. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
23. 3E-4352 [5] WASHER-HARD (8.8X20.5X2.5-MM THK)  
24. 8M-9024 B [2] WASHER-HARD (10.2X22.5X5-MM THK)  
25. 6V-6317 BM [2] BOLT (M10X1.5X20-MM)  
26. 8C-6869 [2] CONNECTOR  
27. 5P-4924 [2] ELBOW  
28. 8T-0788 [2] ELBOW  
29. 096-9988 M [2] BOLT (M14X2X30-MM)  
30. 9S-4191 [2] PLUG (9/16-18-THD)  
31. 7X-0510 [2] WASHER-HARD (15.5X29X3-MM THK)  
32. 139-6024 [1] SUPPORT  
33. 6V-9850 [1] ELBOW  
34. 8L-5449 [1] SPACER (0.375X0.75X0.69-IN THK)  
35. 8T-0276 M [1] BOLT (M8X1.25X45-MM)  
36. 6K-8178 [1] CLIP (LOOP)  
37. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
38. 4N-0205 [1] SPACER (0.42X0.75X0.6-IN THK)  
39. 6V-5842 M [1] BOLT (M10X1.5X40-MM)  
40. 9W-2641 [1] PLATE  
41. 9M-8406 [1] CLIP (LOOP)  
42. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
43. 090-9434 [1] SPACER (9X20X10-MM THK)  
44. 7X-2459 [1] ADAPTER-TEE  
45. 6V-3918 M [1] BOLT (M8X1.25X50-MM)  
46. 6V-5839 [5] WASHER (11X21X2.5-MM THK)  
47. 6V-9829 [1] CAP  
48. 5P-1442 E HOSE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Governor
3114, 3116, 3126 Engines
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog M320 :

CONTROL GP-GOVERNOR
138-7499 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
ACTUATOR GP-GOVERNOR
152-0197 ACTUATOR GP-GOVERNOR
ACTUATOR GP-GOVERNOR
112-7593 ACTUATOR GP-GOVERNOR
TURBOCHARGER GP
115-1179 TURBOCHARGER GP
TURBOCHARGER GP
113-6248 TURBOCHARGER GP
MUFFLER GP
133-6388 MUFFLER GP
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
119-2903 GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
118-0687 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7323 GOVERNOR GP-UNIT INJECTOR
HOSE GP-REFUELING
8U-0876 HOSE GP-REFUELING
LINES GP-FUEL
138-3050 LINES GP-FUEL
LINES GP-FUEL
138-3050 LINES GP-FUEL
LINES GP-FUEL FILTER
107-8182 LINES GP-FUEL FILTER

Truck sale:

Caterpillar M320
 
Caterpillar M320
- wheel excavator
MILTON CAT
 
25.206 
Caterpillar M320, mobilbagger, Bau-Und Bergbauausrüstung
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M320F, mobilbagger, Bau-Und Bergbauausrüstung
332.000 
Caterpillar M320F, mobilbagger, Bau-Und Bergbauausrüstung
- wheel excavator
NMC
Caterpillar M320, mobilbagger, Bau-Und Bergbauausrüstung
40.229 
Caterpillar M320, mobilbagger, Bau-Und Bergbauausrüstung
- wheel excavator
MILTON CAT
 
91.732 
Caterpillar HM 320 130, ag - hammer, Bau-Und Bergbauausrüstung
- hammer
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.