AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

129-1102 BASE GP-FUEL FILTER S/N 4TF41772-UP PART OF 107-8182 LINES GP-FUEL FILTER M318 EXCAVATOR


FUEL SYSTEM
FILTER GP-FUEL
CONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR
GOVERNOR GP
PUMP GP-FUEL INJECTION
GOVERNOR GP
PUMP GP-REFUELING
LINES GP-FUEL

EXCAVATOR M318 EXCAVATOR 6ES
 M318 Excavator 6ES00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2614 M318 6ES   (2015)

FUEL SYSTEM

FILTER GP-FUEL
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
PUMP GP-FUEL PRM & PRIM FILTER
1W-3790 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & WATER SEP
127-6449 PUMP GP-FUEL PRM & WATER SEP
 

#SEBP26140110
 

129-1102: BASE GP-FUEL FILTER

129-1102 BASE GP-FUEL FILTER
S/N 4TF41772-UP
PART OF 107-8182 LINES GP-FUEL FILTER
i00822437 SEBP2614
1291102 BASE GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-1142 [1] BASE AS  
2. 112-6523 [1] INSERT-FUEL FILTER  
3. [1] INSERT-FUEL FILTER  
4. 129-1101 Y [1] VALVE GP-CHECK  
5. 6V-4589 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26140111
 

105-1695: CONTROL GP-FUEL INJECTION

105-1695 CONTROL GP-FUEL INJECTION
S/N 4TF18221-UP
PART OF 118-3600 ENGINE AR
i00478251 SEBP2614
1051695 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-8756 [1] CONTROL GP-FUEL INJECTION  
2. 6V-5683 M [4] BOLT (M6X1X16-MM)  
  M   METRIC PART
 

#SEBP26140112
 

111-1848: CONTROL GP-GOVERNOR

111-1848 CONTROL GP-GOVERNOR
S/N 6ES1-UP
PART OF 140-6077 CHASSIS AR
i00476476 SEBP2614
1111848 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 152-0197 Y [1] ACTUATOR GP-GOVERNOR  
2. 112-8084 M [1] STUD  
3. 112-8089 [1] ROD  
4. 112-8090 [1] PLATE  
5. 112-8091 [1] PLATE  
6. 113-0475 I [1] HOSE AS  
7. 130-5583 I [1] HOSE AS  
8. 113-0454 I [1] HOSE AS  
9. 123-3884 [2] PIN  
10. 123-3885 [1] ROD END  
11. 123-3886 [1] ROD END  
12. 123-3887 M [1] NUT-HEX (M8X1.25-THD, LH)  
13. 123-5029 M [1] NUT-HEX (M8X1-THD)  
14. 6V-9872 [2] CONNECTOR  
15. 5C-7261 M [1] NUT (M8X1.25-THD)  
16. 6V-8397 [6] SEAL-O-RING  
17. 3J-7354 [2] SEAL-O-RING  
18. 6V-8994 [1] UNION (STRAIGHT)  
19. 6V-9168 [1] NUT (11/16-16-THD)  
20. 6V-9836 [1] TEE-SWIVEL  
21. 7X-2537 M [3] BOLT (M8X1.25X35-MM)  
22. 8T-4138 M [1] BOLT (M6X1X20-MM)  
23. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
25. 8T-0341 M [2] BOLT-SOCKET HEAD (M10X1.5X60-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26140113
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 4TF18221-UP
PART OF 130-7323 GOVERNOR GP-UNIT INJECTOR
i00772966 SEBP2614
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
  7S-5005 [2] DOWEL  
  7S-6798 [1] SEAL-LIP TYPE  
  9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUTOFF  
3A. 9X-8902 M [4] BOLT-SOCKET HEAD (M3X0.5X8-MM)  
3B. 4P-9492 [1] BRACKET-SHAFT  
3C. 4P-9493 [1] LEVER-SHUTOFF (SOLENOID)  
3D. 4P-9494 [1] SPRING-SHUTOFF  
3E. 105-0585 [1] LEVER-SHUTOFF (OUTPUT)  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATOR  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

#SEBP26140114
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 4TF18221-UP
PART OF 119-2903 GOVERNOR GP
i00412438 SEBP2614
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#SEBP26140115
 

119-2903: GOVERNOR GP

119-2903 GOVERNOR GP
S/N 4TF18221-UP
PART OF 118-3600 ENGINE AR
i00519350 SEBP2614
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  118-0687 Y [1] GOVERNOR GP-UNIT INJECTOR  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26140116
 

118-0687: GOVERNOR GP-UNIT INJECTOR

118-0687 GOVERNOR GP-UNIT INJECTOR
S/N 4TF18221-UP
PART OF 119-2903 GOVERNOR GP
i00479281 SEBP2614
1180687 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7323 YC [1] GOVERNOR GP-UNIT INJECTOR  
2. 124-6011 [1] CAM-TORQUE  
3. 7E-9749 SPRING GP-GOVERNOR  
  [1] SPRING-LOW IDLE  
  [1] SPRING  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-5746 [1] CONTROL AS-FUEL RATIO  
  6I-1564 [1] DIAPHRAGM  
  7C-5599 [1] WASHER  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  8T-5447 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26140117
 

130-7323: GOVERNOR GP-UNIT INJECTOR

130-7323 GOVERNOR GP-UNIT INJECTOR
S/N 4TF18221-UP
PART OF 118-0687 GOVERNOR GP-UNIT INJECTOR
i00503625 SEBP2614
1307323 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 130-7322 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING  
41. 5C-8312 M [1] NUT (M4X0.7-THD)  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 128-4794 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP26140118
 

8U-0876: HOSE GP-REFUELING

8U-0876 HOSE GP-REFUELING
S/N 6ES1-UP
PART OF 111-1929 PUMP GP-FUEL TRANSFER
AN ATTACHMENT
i00427339 SEBP2614
8U0876 HOSE GP-REFUELING Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-8654 [1] COUPLING  
2. 5W-8655 [1] HOSE AS (SUCTION)  
3. 5W-8656 [1] SCREEN AS (REFUELING)  
4. 5W-8657 [1] COUPLING  
5. 5W-8650 [2] CLAMP-HOSE  
 

#SEBP26140119
 

111-1860: LINES GP-FUEL

111-1860 LINES GP-FUEL
S/N 6ES1-228
PART OF 140-6077 CHASSIS AR
i00476591 SEBP2614
1111860 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-5259 C [1] VALVE AS  
2. 121-5626 C [1] PLATE AS-HEAT SHIELD  
3. 130-1382 C [1] ANGLE  
4. 130-6953 C [1] CLAMP-DOUBLE  
5. 130-7727 C [1] HOSE AS  
6. 130-7728 C [2] HOSE AS  
7. 140-1795 C [1] PLATE  
8. 140-1965 C [1] TUBE AS  
9. 096-0061 BC [3] STRAP-CABLE  
10. 1J-9671 [4] SEAL-O-RING  
11. 3J-1907 C [3] SEAL-O-RING  
12. 3K-8460 [2] PLUG (1/2-20-THD)  
13. 6V-8397 C [9] SEAL-O-RING  
14. 6V-8636 C [3] CONNECTOR  
15. 6V-9850 C [1] ELBOW  
16. 7X-2536 M [2] BOLT (M8X1.25X14-MM)  
17. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4133 M [2] NUT (M10X1.5-THD)  
19. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
20. 8T-4199 CM [1] BOLT (M8X1.25X12-MM)  
21. 8T-4971 M [1] BOLT (M6X1X30-MM)  
22. 8T-5043 [2] ADAPTER  
23. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Specifications
Fuel Filter Base
3114, 3116, 3126 Engines
Fuel Filter and Water Separator
3114, 3116, 3126 Engines
Fuel Filter (Primary)
3114, 3116, 3126 Engines
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
Disassembly and Assembly
Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Fuel Filter Base - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14

Caterpillar Parts SIS Catalog M318 :

ACTUATOR GP-GOVERNOR
152-0197 ACTUATOR GP-GOVERNOR
ACTUATOR GP-GOVERNOR
112-7593 ACTUATOR GP-GOVERNOR
TURBOCHARGER GP
115-1179 TURBOCHARGER GP
TURBOCHARGER GP
113-6248 TURBOCHARGER GP
MUFFLER GP
111-1891 MUFFLER GP
MUFFLER GP
111-1891 MUFFLER GP
253-4363 MUFFLER & CONVERTER GP
MANIFOLD GP-INLET
4W-3480 MANIFOLD GP-INLET
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR
111-1848 CONTROL GP-GOVERNOR
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
119-2903 GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
118-0687 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7323 GOVERNOR GP-UNIT INJECTOR
HOSE GP-REFUELING
8U-0876 HOSE GP-REFUELING

Truck sale:

 
 
Caterpillar M318
- wheel excavator
FINANZAUTO S.A.
Caterpillar M318-07A, wheel excavator, Construction
 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M318-07A, wheel excavator, Construction
162,224 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M318-07A, wheel excavator, Construction
183,999 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M318-07A, wheel excavator, Construction
207,572 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.