AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T-6135 C-FRAME GP-POWER ANGLING S/N 4EB1-UP ONE PIECE PART OF 1U-0640, 9U-8550 BULLDOZER AR-ANGLING AN ATTACHMENT D7R


IMPLEMENTS
C-FRAME GP
BULLDOZER GP
PUSH ARM GP
BULLDOZER GP
OPERATOR STATION
ADJUSTER GP-STEER & XMSN CONT

TRACK-TYPE TRACTOR D7R TRACK-TYPE TRACTOR 2HR
 D7R Track-Type Tractor 2HR00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2629 D7R 2HR   (1996)

IMPLEMENTS

C-FRAME GP
C-FRAME GP-POWER ANGLING
4T-6135 C-FRAME GP-POWER ANGLING
 

#SEBP26290510
 

4T-6135: C-FRAME GP-POWER ANGLING

4T-6135 C-FRAME GP-POWER ANGLING
S/N 4EB1-UP
ONE PIECE
PART OF 1U-0640, 9U-8550 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00376952 SEBP2629
4T6135 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D7R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 451-1256 C [1] PIN-PIVOT  
2. 9W-7602 B [52] SHIM (0.8-MM THK)  
3. 9X-8258 C [4] WASHER (33X56X6-MM THK)  
4. 193-3063 C [2] CAP AS-BEARING  
5. 195-6283 CM [4] NUT-SQUARE (M30X3.5-THD)  
6. 1U-0725 [1] RETAINER  
7. 3E-9850 CM [4] BOLT (M30X3.5X220-MM)  
8. 7X-2562 CM [2] BOLT (M20X2.5X45-MM)  
9. 9W-9009 [1] FRAME AS  
10. 9W-9001 [1] ADAPTER AS  
11. 8E-5486 [2] BUSHING  
12. 5M-6214 [1] PLUG (1/8-27 PTF)  
13. 9W-5375 [2] BAR  
14. 8E-9575 [1] TRUNNION AS  
15. 8E-9575 [1] TRUNNION AS  
16. 9W-4897 [6] BRACKET AS  
17. 8P-9770 [1] PLATE  
18. 1U-0730 [2] BEARING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP26290511
 

212-7410: LINK GP-STABILIZER

212-7410 LINK GP-STABILIZER
S/N J6L1-UP; J8L1-UP
PART OF 212-7413 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i01770735 SEBP2629
2127410 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D7R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-0065 B [52] SHIM (0.8-MM THK)  
2. 160-6304 [2] CAP-BEARING  
3. 212-2072 [1] LINK AS  
  4V-3638 [2] BOSS  
  4V-7412 [2] BOSS (3/8-16-THD)  
  8P-9770 [1] PLATE  
  9T-0064 [2] BEARING  
4. 6V-8182 [8] NUT (3/4-10-THD)  
5. 7X-0377 [8] BOLT (3/4-10X6.5-IN)  
  B   USE AS REQUIRED
 

#SEBP26290512
 

4T-5307: LINK GP-STABILIZER

4T-5307 LINK GP-STABILIZER
S/N 8LH1-99999; 8MH1-99999; 8NH1-99999
PART OF 3G-5725 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i00376814 SEBP2629
4T5307 LINK GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D7R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-6304 [2] CAP-BEARING  
2. 9T-0065 B [52] SHIM (0.8-MM THK)  
3. 4T-5306 [1] LINK AS  
4. 9T-0064 [2] BEARING  
5. 7X-0377 [8] BOLT (3/4-10X6.5-IN)  
  6V-8182 [8] NUT (3/4-10-THD)  
  B   USE AS REQUIRED
 

#SEBP26290513
 

3G-5723: PUSH ARM GP

3G-5723 PUSH ARM GP -RH
S/N 8LH1-99999; 8MH1-99999; 8NH1-99999; J6L1-UP; J8L1-UP
PART OF 212-7413, 3G-5725 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i00364831 SEBP2629
3G5723 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D7R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0979 [1] PUSH ARM AS (RH)  
2. 1J-6740 [1] BEARING AS  
3. 1U-0904 [1] BRACKET AS  
4. 4T-5249 [1] BRACKET  
5. 1U-2533 [1] BAR  
6. 3E-9850 M [2] BOLT (M30X3.5X220-MM)  
7. 195-6283 M [2] NUT-SQUARE (M30X3.5-THD)  
8. 193-3063 [1] CAP AS-BEARING  
9. 9W-7602 B [26] SHIM (0.8-MM THK)  
10. 9X-8258 [2] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP26290514
 

3G-5724: PUSH ARM GP

3G-5724 PUSH ARM GP -LH
S/N 8LH1-99999; 8MH1-99999; 8NH1-99999; J6L1-UP; J8L1-UP
PART OF 212-7413, 3G-5725 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i00364832 SEBP2629
3G5724 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D7R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8258 [2] WASHER (33X56X6-MM THK)  
2. 9W-7602 B [26] SHIM (0.8-MM THK)  
3. 193-3063 [1] CAP AS-BEARING  
4. 195-6283 M [2] NUT-SQUARE (M30X3.5-THD)  
5. 3E-9850 M [2] BOLT (M30X3.5X220-MM)  
6. 1U-0980 [1] PUSH ARM AS (LH)  
7. 1J-6740 [1] BEARING AS  
8. 124-6273 [1] BRACKET  
9. 4T-5250 [1] BRACKET  
10. 1U-2533 [1] BAR  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP26290515
 

212-7413: PUSH ARM GP-STABILIZER

212-7413 PUSH ARM GP-STABILIZER
S/N J6L1-UP; J8L1-UP
PART OF 212-7420, 212-7421 BULLDOZER AR-SEMI-UNIVERSAL, 212-7422, 218-7469 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i01770746 SEBP2629
2127413 PUSH ARM GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D7R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0872 [2] PIN  
2. 1U-0873 [1] PIN  
3. 3G-0910 [1] CAP-BEARING  
4. 3G-0911 B [26] SHIM (0.8-MM THK)  
5. 3G-4533 Y [1] CYLINDER GP-TILT  
6. 3G-5723 Y [1] PUSH ARM GP (RH)  
7. 3G-5724 Y [1] PUSH ARM GP (LH)  
8. 4F-0255 [1] PIN  
9. 6J-5342 [3] RETAINER  
10. 124-6274 [1] BRACE AS-TILT  
11. 212-7410 Y [1] LINK GP-STABILIZER  
12. 3B-4627 [1] PIN-COTTER  
13. 3F-4971 [1] PIN  
14. 7X-0365 [6] BOLT (3/4-10X1.5-IN)  
15. 7X-0392 [4] BOLT (7/8-9X6-IN)  
16. 7X-0449 [4] NUT-FULL (7/8-9-THD)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP26290516
 

3G-5725: PUSH ARM GP-STABILIZER

3G-5725 PUSH ARM GP-STABILIZER
S/N 8LH1-99999; 8MH1-99999; 8NH1-99999
PART OF 9U-8602, 9U-8605 BULLDOZER AR-SEMI-UNIVERSAL, 9U-8603, 9U-8607 BULLDOZER AR-STRAIGHT, 9U-8601, 9U-8606 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i00364838 SEBP2629
3G5725 PUSH ARM GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your D7R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-5724 Y [1] PUSH ARM GP (LH)  
2. 6J-5342 C [3] RETAINER  
3. 124-6274 C [1] BRACE AS-TILT  
4. 1U-0873 C [1] PIN  
5. 7X-0365 C [6] BOLT (3/4-10X1.5-IN)  
6. 1U-0872 [2] PIN  
7. 4T-5307 Y [1] LINK GP-STABILIZER  
8. 3G-4533 Y [1] CYLINDER GP-TILT  
9. 3G-5723 Y [1] PUSH ARM GP (RH)  
10. 3F-4971 C [1] PIN (2.0IN DIA)  
11. 3G-0910 C [1] CAP-BEARING  
12. 3G-0911 CB [26] SHIM (0.8-MM THK)  
13. 7X-0449 C [4] NUT-FULL (7/8-9-THD)  
14. 7X-0392 C [4] BOLT (7/8-9X6-IN)  
15. 3B-4627 C [1] PIN-COTTER  
16. 4F-0255 C [1] PIN (.5IN DIA)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26290517
 

4T-5316: TRUNNION GP-BULLDOZER

4T-5316 TRUNNION GP-BULLDOZER
S/N 4EB1-UP; 8LH1-99999; 8MH1-UP; 8NH1-UP; J6L1-UP; J8L1-UP; 2HR1-UP
PART OF 1U-0640, 9U-8550 BULLDOZER AR-ANGLING, 212-7420, 212-7421, 9U-8602, 9U-8605 BULLDOZER AR-SEMI-UNIVERSAL, 212-7422, 218-7469, 9U-8603, 9U-8607 BULLDOZER AR-STRAIGHT, 9U-8601, 9U-8606 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i00376818 SEBP2629
4T5316 TRUNNION GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D7R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-5405 [2] TRUNNION AS  
    (EACH INCLUDES)
  5J-4321 [1] TRUNNION  
2. 7X-0351 [32] BOLT (5/8-11X3.75-IN)  
  8T-4122 [32] WASHER-HARD (17X32X3.5-MM THK)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#SEBP26290518
 

122-1511: ADJUSTER GP-CONTROL

122-1511 ADJUSTER GP-CONTROL -MANUAL
S/N 2HR1-UP
PART OF 122-1513 CONTROL GP-STEERING & XMSN
i00518813 SEBP2629
1221511 ADJUSTER GP-CONTROL Parts scheme 1221511 ADJUSTER GP-CONTROL Parts scheme
  For full view, you need register

Parts for your D7R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7975 [2] SLEEVE-BRASS  
2. 8F-7702 [2] SEAL-LIP TYPE  
3. 8T-1172 [2] SEAL-LIP TYPE  
4. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
5. 8T-5410 [2] SEAL-LIP TYPE  
6. 8T-9006 M [1] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
7. 122-4268 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
8. 122-4271 [1] KNOB  
9. 122-6824 [1] PLATE  
10. 122-6825 [1] SPACER  
11. 122-6826 [1] PLATE AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
12. 8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 6V-9632 M [2] NUT-WELD (M6X1-THD)  
14. 130-9989 [2] SLEEVE  
15. 130-9990 [1] SLEEVE  
16. 132-3581 [1] BEARING AS  
17. 133-7212 [1] PLATE  
18. 133-7214 [1] SHAFT  
19. 133-7230 [1] SHAFT  
20. 133-7231 [1] PLATE  
21. 136-2288 [1] BRACKET AS  
  5C-7261 M [4] NUT (M8X1.25-THD)  
22. 136-2290 [1] PLATE AS  
23. 5C-7261 M [1] NUT (M8X1.25-THD)  
24. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
25. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
26. 7X-7729 [8] WASHER (11X25X3-MM THK)  
27. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [4] NUT (M10X1.5-THD)  
29. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
30. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
31. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
32. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
33. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
34. 8T-7934 [4] WASHER-HARD (11X21X5-MM THK)  
35. 124-0799 [1] SPRING  
36. 130-1985 [1] SLEEVE  
  M   METRIC PART
 

#SEBP26290519
 

124-2354: ADJUSTER GP-CONTROL

124-2354 ADJUSTER GP-CONTROL -ELECTRIC
S/N 2HR1-UP
PART OF 124-2356 CONTROL GP-STEERING & XMSN
AN ATTACHMENT
i00516379 SEBP2629
1242354 ADJUSTER GP-CONTROL Parts scheme
  For full view, you need register

Parts for your D7R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7975 E SLEEVE-BRASS (4-CM)  
2. 8F-7702 [4] SEAL-LIP TYPE  
3. 8T-1172 [4] SEAL-LIP TYPE  
4. 8T-2658 M [1] LOCKNUT (M3X0.5-THD)  
5. 8T-5410 [4] SEAL-LIP TYPE  
6. 8T-9006 M [1] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
7. 9X-6772 [4] STRAP-CABLE  
8. 110-7880 [1] SWITCH AS (ROCKER)(CONSOLE RAISE, LOWER)  
  3E-3362 [1] WEDGE-PLUG LOCK (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
9. 122-4268 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
10. 122-4270 [1] BRACKET AS  
10A. 122-6046 [1] MOUNT  
10B. 5C-7261 M [4] NUT (M8X1.25-THD)  
11. 122-4271 [1] KNOB (ARMREST ADJUSTMENT)  
12. 122-6824 [1] PLATE  
13. 122-6825 [1] SPACER  
14. 122-6826 [1] PLATE AS  
14A. 6V-9632 M [2] NUT-WELD (M6X1-THD)  
14B. 8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14C. 8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
15. 124-0799 [1] SPRING  
16. 127-7494 [1] PLATE AS  
16A. 6V-9632 M [2] NUT-WELD (M6X1-THD)  
16B. 122-6049 [1] MOUNT  
16C. 8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
17. 130-0701 [1] SHAFT  
18. 130-1985 [1] SLEEVE  
19. 130-9989 [4] SLEEVE  
20. 130-9990 [2] SLEEVE  
21. 132-3581 [2] BEARING AS  
22. 133-0155 [1] SHAFT  
23. 133-6595 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
24. 133-6974 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
25. 133-7212 [1] PLATE  
26. 133-7214 [1] SHAFT  
27. 133-7230 [1] SHAFT  
28. 133-7231 [1] PLATE  
29. 149-4889 [1] ACTUATOR AS  
  3E-3362 [1] WEDGE-PLUG LOCK (2-PIN)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
30. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
31. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
32. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
33. 7X-7729 [4] WASHER (11X25X3-MM THK)  
34. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [8] NUT (M10X1.5-THD)  
36. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
37. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
40. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
41. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
42. 8T-7934 [12] WASHER-HARD (11X21X5-MM THK)  
43. 8T-9367 [1] BOLT (1/4-20X2-IN)  
44. 8T-9368 [1] BOLT (1/4-20X2.25-IN)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D7R :

9U-8606 BULLDOZER AR-UNIVERSAL
9U-8601 BULLDOZER AR-UNIVERSAL
9U-8607 BULLDOZER AR-STRAIGHT
9U-8603 BULLDOZER AR-STRAIGHT
BULLDOZER AR-STRAIGHT
218-7469 BULLDOZER AR-STRAIGHT
BULLDOZER AR-STRAIGHT
212-7422 BULLDOZER AR-STRAIGHT
9U-8605 BULLDOZER AR-SEMI-UNIVERSAL
9U-8602 BULLDOZER AR-SEMI-UNIVERSAL
LINK GP-STABILIZER
212-7410 LINK GP-STABILIZER
LINK GP-STABILIZER
4T-5307 LINK GP-STABILIZER
PUSH ARM GP
3G-5723 PUSH ARM GP
PUSH ARM GP
3G-5724 PUSH ARM GP
PUSH ARM GP-STABILIZER
212-7413 PUSH ARM GP-STABILIZER
PUSH ARM GP-STABILIZER
3G-5725 PUSH ARM GP-STABILIZER
TRUNNION GP-BULLDOZER
4T-5316 TRUNNION GP-BULLDOZER
ADJUSTER GP-CONTROL
122-1511 ADJUSTER GP-CONTROL

Truck sale:

Caterpillar D7R
 
Caterpillar D7R
- Crawler dozers
FINNING CANADA
 
454,000 
Caterpillar D7R, Crawler dozers, Construction
- Crawler dozers
EMPRESAS MATCO, S.A. DE C.V.
 
590,000 
Caterpillar D7R, Crawler dozers, Construction
- Crawler dozers
EMPRESAS MATCO, S.A. DE C.V.
 
556,000 
Caterpillar D7R, Crawler dozers, Construction
- Crawler dozers
EMPRESAS MATCO, S.A. DE C.V.
Caterpillar D7R, Crawler dozers, Construction
365,216 
Caterpillar D7R, Crawler dozers, Construction
- Crawler dozers
HASTINGS DEERING (AUSTRALIA)
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.