WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP26320680
107-3291: EDGE GP-BIT & CUTTING
107-3291 EDGE GP-BIT & CUTTING
S/N 9BM1-UP
EXTENDED WEAR LIFE/SEMI-UNIVERSAL
AN ATTACHMENT
S/N 9BM1-UP
EXTENDED WEAR LIFE/SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
#SEBP26320681
107-3293: EDGE GP-BIT & CUTTING
107-3293 EDGE GP-BIT & CUTTING
S/N 9BM1-UP
EXTENDED WEAR LIFE-STRAIGHT
FOR USE WITH @@@@@108-3982@@@@@, @@@@@108-3983@@@@@
AN ATTACHMENT
S/N 9BM1-UP
EXTENDED WEAR LIFE-STRAIGHT
FOR USE WITH @@@@@108-3982@@@@@, @@@@@108-3983@@@@@
AN ATTACHMENT
For full view, you need register
#SEBP26320682
6Y-2039: EDGE GP-BIT & CUTTING
6Y-2039 EDGE GP-BIT & CUTTING
S/N 4BP1-UP
PART OF 9U-8094 BLADE & EDGE GP-STRAIGHT
AN ATTACHMENT
S/N 4BP1-UP
PART OF 9U-8094 BLADE & EDGE GP-STRAIGHT
AN ATTACHMENT
For full view, you need register
#SEBP26320683
9W-3762: EDGE GP-BIT & CUTTING
9W-3762 EDGE GP-BIT & CUTTING
S/N 9BM1-UP; 3FP1-UP; 4AP1-UP
PART OF 9U-8095 BLADE & EDGE GP-SEMI-UNIVERSAL, 9U-8608 BLADE GP-SEMI-UNIVERSAL
AN ATTACHMENT
S/N 9BM1-UP; 3FP1-UP; 4AP1-UP
PART OF 9U-8095 BLADE & EDGE GP-SEMI-UNIVERSAL, 9U-8608 BLADE GP-SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
#SEBP26320684
506-5922: EDGE-CUTTING
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP26320685
9W-0610: MOUNTING GP-RIPPER
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-0609 | [4] | SPACER (53X100X35-MM THK) | |
| 2. | 1U-0301 | [2] | BRACKET AS | |
| 3. | 1U-0612 | [2] | PIN | |
| 4. | 7X-0292 | [2] | BOLT (3/8-16X4.5-IN) | |
| 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | ||
| 5. | 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | |
| 6. | 5D-3118 | [20] | STUD-TAPERLOCK (1-8-THD) | |
| 7. | 7X-0335 | [2] | BOLT (1/2-13X5.25-IN) | |
| 8. | 1U-0300 | [1] | BRACKET AS (RH) | |
| 7T-1975 | [1] | BRACKET AS (LH) | ||
| 9. | 1U-0159 | [2] | PIN | |
| 10. | 9N-4449 B | [12] | SPACER (68X121X1.5-MM THK) | |
| 11. | 6V-8190 | [20] | NUT (1-8-THD) | |
| 12. | 9N-4450 B | [4] | SPACER (68X120X5-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP26320686
9W-0804: RIPPER AR
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9T-2716 Y | [1] | CYLINDER GP-RIPPER | ||
| 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | ||
| 9W-1018 Y | [1] | LINES GP-RIPPER | ||
| 9W-0610 Y | [1] | MOUNTING GP-RIPPER | ||
| 9W-1017 Y | [1] | RIPPER GP | ||
| 8M-3494 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26320687
9W-1017: RIPPER GP
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-0201 | [1] | CARRIAGE AS | |
| 1A. | 5K-7748 | [3] | HOLDER-BIT | |
| 9W-0513 | [2] | PLATE AS | ||
| 2. | 2K-4309 | [1] | REINFORCEMENT (RH) | |
| 2K-4310 | [1] | REINFORCEMENT (LH) | ||
| 3. | 9W-0553 | [1] | PLATE AS | |
| 4. | 9J-9598 | [2] | PIN | |
| 5. | 7X-0292 | [2] | BOLT (3/8-16X4.5-IN) | |
| 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | ||
| 6. | 8T-9389 | [8] | BOLT (1/2-13X2.75-IN) | |
| 7. | 6V-8188 | [8] | NUT (1/2-13-THD) | |
| 8. | 9W-0873 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 9. | 9W-0876 | [2] | BUSHING | |
| 10. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 11. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 12. | 3K-8510 | [1] | PIN | |
| 13. | 5C-6565 | [2] | BOLT (1/2-13X1.125-IN) | |
| 14. | 2K-0703 | [1] | BAR | |
| 15. | 189-0985 | [1] | FRAME & BEARING AS | |
| 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | ||
| 16. | 9W-0099 | [4] | BUSHING | |
| 17. | 1U-0159 | [2] | PIN | |
| 18. | 7X-0340 | [2] | BOLT (1/2-13X6.5-IN) | |
| 19. | 9J-8926 Y | [1] | TOOTH GP-RIPPER | |
| 20. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26320688
3A-7880: TOOTH GP-RIPPER
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8J-2189 Y | [3] | TOOTH GP-RIPPER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26320689
8J-2189: TOOTH GP-RIPPER
8J-2189 TOOTH GP-RIPPER -STRAIGHT
S/N 9BM1-UP
PART OF 3A-7880 TOOTH GP-RIPPER
Type 1
AN ATTACHMENT
S/N 9BM1-UP
PART OF 3A-7880 TOOTH GP-RIPPER
Type 1
AN ATTACHMENT
For full view, you need register
Information:
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
