WORK TOOLS
RIPPER GPGROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSGASKET & SEAL KITS
WORK TOOLS
RIPPER GP
#SEBP26350620
9W-0804: RIPPER AR
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9T-2716 Y | [1] | CYLINDER GP-RIPPER | ||
| 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | ||
| 9W-1018 Y | [1] | LINES GP-RIPPER | ||
| 9W-0610 Y | [1] | MOUNTING GP-RIPPER | ||
| 9W-1017 Y | [1] | RIPPER GP | ||
| 8M-3494 | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26350621
9W-1017: RIPPER GP
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-0201 | [1] | CARRIAGE AS | |
| 1A. | 5K-7748 | [3] | HOLDER-BIT | |
| 9W-0513 | [2] | PLATE AS | ||
| 2. | 2K-4309 | [1] | REINFORCEMENT (RH) | |
| 2K-4310 | [1] | REINFORCEMENT (LH) | ||
| 3. | 9W-0553 | [1] | PLATE AS | |
| 4. | 9J-9598 | [2] | PIN | |
| 5. | 7X-0292 | [2] | BOLT (3/8-16X4.5-IN) | |
| 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | ||
| 6. | 8T-9389 | [8] | BOLT (1/2-13X2.75-IN) | |
| 7. | 6V-8188 | [8] | NUT (1/2-13-THD) | |
| 8. | 9W-0873 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 9. | 9W-0876 | [2] | BUSHING | |
| 10. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 11. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 12. | 3K-8510 | [1] | PIN | |
| 13. | 5C-6565 | [2] | BOLT (1/2-13X1.125-IN) | |
| 14. | 2K-0703 | [1] | BAR | |
| 15. | 189-0985 | [1] | FRAME & BEARING AS | |
| 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | ||
| 16. | 9W-0099 | [4] | BUSHING | |
| 17. | 1U-0159 | [2] | PIN | |
| 18. | 7X-0340 | [2] | BOLT (1/2-13X6.5-IN) | |
| 19. | 9J-8926 Y | [1] | TOOTH GP-RIPPER | |
| 20. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26350622
3A-7880: TOOTH GP-RIPPER
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8J-2189 Y | [3] | TOOTH GP-RIPPER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26350623
8J-2189: TOOTH GP-RIPPER
8J-2189 TOOTH GP-RIPPER -STRAIGHT
S/N 4FM1-UP
PART OF 3A-7880 TOOTH GP-RIPPER
Type 1
AN ATTACHMENT
S/N 4FM1-UP
PART OF 3A-7880 TOOTH GP-RIPPER
Type 1
AN ATTACHMENT
For full view, you need register
#SEBP26350624
8J-2189: TOOTH GP-RIPPER
8J-2189 TOOTH GP-RIPPER -STRAIGHT
S/N 4FM1-UP
PART OF 3A-7880 TOOTH GP-RIPPER
Type 2
AN ATTACHMENT
S/N 4FM1-UP
PART OF 3A-7880 TOOTH GP-RIPPER
Type 2
AN ATTACHMENT
For full view, you need register
#SEBP26350625
9J-8926: TOOTH GP-RIPPER
9J-8926 TOOTH GP-RIPPER -CURVED
S/N 3SH1-UP; 4FM1-UP
PART OF 9W-1017 RIPPER GP
AN ATTACHMENT
S/N 3SH1-UP; 4FM1-UP
PART OF 9W-1017 RIPPER GP
AN ATTACHMENT
For full view, you need register
#SEBP26350626
126-2297: FILM GP
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 107-9250 | [1] | FILM-STRIPE (CAT, RH)(CATERPILLAR RH FRONT) | |
| 2. | 126-2285 | [1] | FILM-STRIPE (CAT, LH)(CATERPILLAR LH FRONT) | |
| 3. | 126-2281 | [1] | FILM-STRIPE (CATERPILLAR, FRONT)(CATERPILLAR FRONT) | |
| 4. | 126-2295 | [1] | FILM-STRIPE (D6R, LH)(D6R LH) | |
| 5. | 126-2282 | [1] | FILM-STRIPE (RH)(RH) | |
| 6. | 126-2296 | [1] | FILM-STRIPE (D6R RH) | |
| 7. | 126-2280 | [1] | FILM-STRIPE (CATERPILLAR, REAR)(CATERPILLAR REAR) | |
| 8. | 137-3924 | [1] | FILM-STRIPE (LH) | |
| 9. | [1] | FILM-STRIPE (LH) | ||
#SEBP26350627
148-0293: KIT-GASKET
148-0293 KIT-GASKET
S/N 4FM1-UP
KIT INCLUDES GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FIELD INSTALLATION
S/N 4FM1-UP
KIT INCLUDES GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FIELD INSTALLATION
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6H-8778 | [2] | GASKET | ||
| 2S-0795 | [2] | GASKET | ||
| 2W-4561 | [1] | GASKET | ||
| 4N-3841 | [1] | GASKET | ||
| 5S-6051 | [2] | GASKET | ||
| 7F-7590 | [1] | GASKET | ||
| 4N-0699 | [1] | GASKET | ||
| 9Y-6860 | [1] | GASKET | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 451-1493 | [2] | SEAL-O-RING | ||
| 114-2687 | [3] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP26350628
177-4134: KIT-GASKET
177-4134 KIT-GASKET -TORQUE CONVERTER
S/N 4FM1-UP
KIT INCLUDES ALL SEALS, GASKETS & BENDABLE LOCKS TO OVERHAUL A TORQUE CONVERTER
FOR USE WITH @@@@@ 1T-2004@@@@@
FIELD INSTALLATION
S/N 4FM1-UP
KIT INCLUDES ALL SEALS, GASKETS & BENDABLE LOCKS TO OVERHAUL A TORQUE CONVERTER
FOR USE WITH @@@@@ 1T-2004@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8H-9818 | [1] | GASKET | ||
| 136-2216 | [1] | SEAL-LIP TYPE | ||
| 1S-9799 | [1] | SEAL-O-RING | ||
| 2S-2251 | [1] | SEAL-O-RING | ||
| 6F-4718 | [1] | SEAL-O-RING | ||
| 8M-4433 | [2] | SEAL-O-RING | ||
| 8M-4986 | [1] | SEAL-O-RING | ||
| 8M-8157 | [1] | SEAL-O-RING | ||
| 9H-0846 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP26350629
297-1744: KIT-GASKET
297-1744 KIT-GASKET
S/N 4FM1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.
FIELD INSTALLATION
S/N 4FM1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.
FIELD INSTALLATION
For full view, you need register
