HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC GP
HYDRAULIC SYSTEM
CYLINDER GP
#SEBP26390400
122-8421: CYLINDER GP-RIPPER
122-8421 CYLINDER GP-RIPPER -RH
S/N 7RP1-UP
114.3-MM (4.5-IN) BORE X 289-MM (11.4-IN) STROKE
PART OF 8E-6128 CYLINDER & MTG GP-RIPPER
AN ATTACHMENT
S/N 7RP1-UP
114.3-MM (4.5-IN) BORE X 289-MM (11.4-IN) STROKE
PART OF 8E-6128 CYLINDER & MTG GP-RIPPER
AN ATTACHMENT
For full view, you need register
Parts for your 963C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 122-8422 | [1] | CYLINDER AS (RH) | |
| 1A. | 4B-4626 | [1] | LUG (3/8-16-THD) | |
| 2. | 7J-8287 | [1] | BOLT-LOCKING (1-1/4-12X3.25-IN) | |
| 3. | 4K-0684 | [3] | WASHER-HARD (34X55X6-MM THK) | |
| 4. | 8J-5549 | [1] | PISTON | |
| 5. | 4J-3745 | [1] | RING-WEAR | |
| 6. | 5J-4986 | [1] | SEAL AS | |
| 7. | 8J-5550 | [1] | CROWN | |
| 8. | 8T-4958 | [1] | RING-WEAR | |
| 9. | 231-3538 | [1] | SEAL-WIPER | |
| 10. | 3G-0199 | [1] | ROD AS | |
| 11. | 167-2307 | [1] | SEAL-U-CUP | |
| 12. | 167-2200 | [1] | SEAL AS | |
| 13. | 1K-7095 | [1] | RING-BACKUP | |
| 14. | 2H-3928 | [1] | SEAL-O-RING | |
| 15. | 9T-9257 | [1] | HEAD |
#SEBP26390401
2Q-5456: CYLINDER GP-TILT
2Q-5456 CYLINDER GP-TILT
S/N 2DS1-UP
165.1-MM (6.5-IN)BORE X 623.6-MM (24.6-IN)STROKE
PART OF 9Z-8332 MODIFICATION GP-KICKOUT & POS
AN ATTACHMENT
S/N 2DS1-UP
165.1-MM (6.5-IN)BORE X 623.6-MM (24.6-IN)STROKE
PART OF 9Z-8332 MODIFICATION GP-KICKOUT & POS
AN ATTACHMENT
For full view, you need register
Parts for your 963C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2H-3856 | [3] | BOLT (7/8-9X3.75-IN) | |
| 2. | 3G-3867 | [1] | CYLINDER AS | |
| 2A. | 3G-0222 | [1] | BUSHING | |
| 0T-0102 | [1] | BOLT (3/8-16X0.625-IN) | ||
| 3. | 4T-8695 J | [1] | SEAL AS | |
| 4. | 5Q-5504 | [1] | ROD AS | |
| 4A. | 3G-0222 | [1] | BUSHING | |
| 5. | 6E-5528 | [1] | HEAD | |
| 6. | 9F-2167 | [1] | SCREW-PURGE (3/8-24X1.164-IN) | |
| 7. | 9T-8420 | [1] | PISTON | |
| 8. | 346-5196 | [1] | SEAL-WIPER | |
| 9. | 346-5192 | [1] | SEAL AS-BUFFER | |
| 10. | 346-5200 | [1] | SEAL-U-CUP | |
| 11. | 1D-4628 | [3] | BOLT (7/8-9X3.25-IN) | |
| 12. | 2J-7686 | [1] | LOCKNUT (2.5X12-THD) | |
| 13. | 5P-8249 | [6] | WASHER-HARD (24X41.5X4-MM THK) | |
| 14. | 7J-1938 J | [1] | RING-WEAR | |
| 15. | 7J-8955 J | [1] | RING-BACKUP | |
| 16. | 7J-8956 J | [1] | SEAL-O-RING | |
| 17. | 8T-7848 J | [1] | RING-WEAR | |
| 18. | 8T-8379 | [1] | SEAL-HEAD | |
| AVAILABLE REPAIR KIT(S): | ||||
| 381-1704 J | [1] | KIT-HYD CYLINDER SEAL (TILT) | ||
| (ALSO INCLUDES BUFFER SEAL AS, WIPER SEAL & U-CUP SEAL) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP26390402
3G-3874: CYLINDER GP-TILT
3G-3874 CYLINDER GP-TILT
S/N 2DS1-UP
165.1MM (6.5 IN) BORE X 623.6MM (24.55 IN) STROKE
PART OF 127-1748, 216-3281 HYDRAULIC AR
S/N 2DS1-UP
165.1MM (6.5 IN) BORE X 623.6MM (24.55 IN) STROKE
PART OF 127-1748, 216-3281 HYDRAULIC AR
For full view, you need register
Parts for your 963C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4. | 2J-7686 | [1] | LOCKNUT (2.5X12-THD) | |
| 5. | 7J-1938 | [1] | RING-WEAR | |
| 6. | 4T-8695 | [1] | SEAL AS | |
| 7. | 9T-8420 | [1] | PISTON | |
| 8. | 1D-4628 | [3] | BOLT (7/8-9X3.25-IN) | |
| 9. | 5P-8249 | [6] | WASHER-HARD (24X41.5X4-MM THK) | |
| 10. | 2H-3856 | [3] | BOLT (7/8-9X3.75-IN) | |
| 11. | 7J-8956 | [1] | SEAL-O-RING | |
| 12. | 7J-8955 | [1] | RING-BACKUP | |
| 13. | 167-2214 | [1] | SEAL AS-BUFFER | |
| 14. | 167-2328 | [1] | SEAL-U-CUP | |
| 15. | 9T-8404 | [1] | ROD AS | |
| 3G-0222 | [1] | BUSHING | ||
| 16. | 227-1149 | [1] | SEAL-WIPER | |
| 17. | 6E-5528 | [1] | HEAD | |
| 18. | 3G-3867 | [1] | CYLINDER AS | |
| 3G-0222 | [1] | BUSHING | ||
| 19. | 9F-2167 | [1] | SCREW-PURGE (3/8-24X1.164-IN) | |
| 20. | 8T-7848 | [1] | RING-WEAR | |
| 21. | 8T-8379 | [1] | SEAL-HEAD | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP26390403
127-1748: HYDRAULIC AR
For full view, you need register
Parts for your 963C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 129-5362 Y | [1] | CONTROL GP-HYDRAULIC | ||
| 6E-6632 Y | [2] | CYLINDER GP-LIFT | ||
| 3G-3874 Y | [1] | CYLINDER GP-TILT | ||
| 8G-0516 Y | [1] | KICKOUT & POSITIONER GP | ||
| 8Y-9623 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 129-5365 Y | [1] | LINES GP-PILOT | ||
| 129-5364 Y | [1] | LINES GP-PUMP | ||
| 3W-3358 Y | [1] | LINES GP-TILT CYLINDER | ||
| 7P-2675 Y | [1] | MOUNTING GP-HYDRAULIC TANK | ||
| 152-8388 Y | [1] | PUMP GP-VANE | ||
| S/N 2DS1-2417 | ||||
| 215-7797 Y | [1] | PUMP GP-VANE | ||
| S/N 2DS2418-2562 | ||||
| 129-5366 Y | [1] | TANK & FILTER GP-HYDRAULIC | ||
| 129-5361 Y | [1] | VALVE GP-CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26390404
129-6608: HYDRAULIC AR
129-6608 HYDRAULIC AR
S/N 2DS1-UP
3-VALVE-SINGLE LEVER WITH DIVERTER & LINES
AN ATTACHMENT
S/N 2DS1-UP
3-VALVE-SINGLE LEVER WITH DIVERTER & LINES
AN ATTACHMENT
For full view, you need register
Parts for your 963C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 133-5178 Y | [1] | CONTROL GP-DIVERTER | ||
| 129-6610 Y | [1] | LINES GP-ATTACHMENT | ||
| 129-6632 Y | [1] | LINES GP-DIVERTER VALVE | ||
| 129-6612 Y | [1] | LINES GP-PUMP | ||
| S/N 2DS1-2562 | ||||
| 129-6614 Y | [1] | VALVE GP-CONTROL | ||
| S/N 2DS1-2562 | ||||
| 219-6528 Y | [1] | VALVE GP-CONTROL | ||
| S/N 2DS2563-UP | ||||
| 127-0863 Y | [1] | VALVE GP-PILOT | ||
| 6V-2435 | [1] | FILM-INSTRUCTION (RIPPER) | ||
| LOCATED TO THE RIGHT OF LIFT/TILT | ||||
| CONTROL FILM IN OPERATORS COMPARTMENT | ||||
| 6V-2436 | [1] | FILM-INSTRUCTION (MULTIPURPOSE BUCKET) | ||
| LOCATED TO THE RIGHT OF RIPPER CONTROL | ||||
| FILM IN OPERATORS COMPARTMENT | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26390405
216-3281: HYDRAULIC AR
For full view, you need register
Parts for your 963C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 129-5362 Y | [1] | CONTROL GP-HYDRAULIC | ||
| 6E-6632 Y | [2] | CYLINDER GP-LIFT | ||
| 3G-3874 Y | [1] | CYLINDER GP-TILT | ||
| 175-7279 Y | [1] | KICKOUT & POSITIONER GP | ||
| 216-3792 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 216-4625 Y | [1] | LINES GP-PILOT | ||
| 216-3201 Y | [1] | LINES GP-PUMP | ||
| 216-3231 Y | [1] | LINES GP-TILT CYLINDER | ||
| 7P-2675 Y | [1] | MOUNTING GP-HYDRAULIC TANK | ||
| 213-7215 Y | [1] | PUMP GP-VANE | ||
| 215-5655 Y | [1] | TANK & FILTER GP-HYDRAULIC | ||
| 129-5361 Y | [1] | VALVE GP-CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26390406
220-8619: HYDRAULIC AR
For full view, you need register
Parts for your 963C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 133-5178 Y | [1] | CONTROL GP-DIVERTER | ||
| 129-6610 Y | [1] | LINES GP-ATTACHMENT | ||
| 129-6632 Y | [1] | LINES GP-DIVERTER VALVE | ||
| 175-3557 Y | [1] | LINES GP-FRONT (LIFT ARMS) | ||
| 219-6528 Y | [1] | VALVE GP-CONTROL | ||
| 127-0863 Y | [1] | VALVE GP-PILOT | ||
| 6V-2435 | [1] | FILM-INSTRUCTION (RIPPER)(RIPPER) | ||
| TO THE RIGHT OF LIFT/TILT CONTROL FILM IN OPERATOR COMPARTMENT | ||||
| 6V-2436 | [1] | FILM-INSTRUCTION (MULTIPURPOSE BUCKET)(MP BUCKET) | ||
| TO THE RIGHT OF THE RIPPER CONTROL FILM IN OPERATOR COMPARTMENT | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26390407
129-6609: HYDRAULIC AR-3 VALVE
For full view, you need register
Parts for your 963C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 129-6610 Y | [1] | LINES GP-ATTACHMENT | ||
| 129-6612 Y | [1] | LINES GP-PUMP | ||
| S/N 2DS1-2562 | ||||
| 149-0386 Y | [1] | LINES GP-REAR ATTACHMENT | ||
| 129-6614 Y | [1] | VALVE GP-CONTROL | ||
| S/N 2DS1-2562 | ||||
| 219-6528 Y | [1] | VALVE GP-CONTROL | ||
| S/N 2DS2563-UP | ||||
| 176-1794 Y | [1] | VALVE GP-PILOT | ||
| 6V-2435 | [1] | FILM-INSTRUCTION (RIPPER) | ||
| (LOCATE TO THE RIGHT OF LIFT/TILT CONTROL FILM IN OPERATORS COMPARTMENT) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26390408
137-0175: HYDRAULIC AR-3 VALVE
137-0175 HYDRAULIC AR-3 VALVE
S/N 2DS1-UP
SINGLE LEVER WITH FRONT LINES
AN ATTACHMENT
S/N 2DS1-UP
SINGLE LEVER WITH FRONT LINES
AN ATTACHMENT
For full view, you need register
Parts for your 963C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 129-6610 Y | [1] | LINES GP-ATTACHMENT | ||
| 173-7409 Y | [1] | LINES GP-FRONT | ||
| S/N 2DS1-705 | ||||
| 180-1268 Y | [1] | LINES GP-FRONT | ||
| S/N 2DS706-2562 | ||||
| 129-6612 Y | [1] | LINES GP-PUMP | ||
| S/N 2DS1-2562 | ||||
| 216-4241 Y | [1] | LINES GP-FRONT | ||
| S/N 2DS2563-UP | ||||
| 5G-7862 Y | [1] | MOUNTING GP-ATTACHMENT | ||
| S/N 2DS1-705 | ||||
| 219-6528 Y | [1] | VALVE GP-CONTROL | ||
| 127-0863 Y | [1] | VALVE GP-PILOT | ||
| 6V-2436 | [1] | FILM-INSTRUCTION (MULTIPURPOSE BUCKET) | ||
| (LOCATED TO THE RIGHT OF LIFT/TILT CONTROL FILM IN OPERATORS COMPARTMENT) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26390409
137-0176: HYDRAULIC AR-3 VALVE
For full view, you need register
Parts for your 963C TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 129-6610 Y | [1] | LINES GP-ATTACHMENT | ||
| 129-6612 Y | [1] | LINES GP-PUMP | ||
| S/N 2DS1-2562 | ||||
| 5G-7862 Y | [1] | MOUNTING GP-ATTACHMENT | ||
| 129-6614 Y | [1] | VALVE GP-CONTROL | ||
| S/N 2DS1-2562 | ||||
| 219-6528 Y | [1] | VALVE GP-CONTROL | ||
| S/N 2DS2563-UP | ||||
| 127-0863 Y | [1] | VALVE GP-PILOT | ||
| 3H-5368 J | [8] | BOLT (7/16-14X1.375-IN) | ||
| 5H-4020 J | [2] | COVER | ||
| 1P-4578 J | [4] | FLANGE-HALF | ||
| 4J-0522 J | [2] | SEAL-O-RING | ||
| 5P-8244 J | [8] | WASHER-HARD (12X22.5X2.5-MM THK) | ||
| J | REQUIRED TO BLOCK AUXILIARY VALVE PORTS | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 963C :
Truck sale:
116,000
