AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

217-1452 BUCKET GP-GENERAL PURPOSE -FLUSH MOUNTED TEETH S/N 2DS2725-UP 2.3-CU M (3.0-CU YD) HEAPED CAPACITY BARE BUCKET AN ATTACHMENT 963C


WORK TOOLS
BUCKET GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK LOADER 963C TRACK LOADER 2DS
 963C Track-Type Loader LGP 2DS00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2639 963C 2DS   (1997)

WORK TOOLS

BUCKET GP
BUCKET AS-GENERAL PURPOSE
217-1454 BUCKET AS-GENERAL PURPOSE
BUCKET AS-GENERAL PURPOSE
217-1455 BUCKET AS-GENERAL PURPOSE
BUCKET GP-GENERAL PURPOSE
217-1452 BUCKET GP-GENERAL PURPOSE
BUCKET GP-GENERAL PURPOSE
217-1453 BUCKET GP-GENERAL PURPOSE
BUCKET GP-GENERAL PURPOSE
8Y-9401 BUCKET GP-GENERAL PURPOSE
BUCKET GP-GENERAL PURPOSE
8Y-9408 BUCKET GP-GENERAL PURPOSE
 

#SEBP26390580
 

217-1452: BUCKET GP-GENERAL PURPOSE

217-1452 BUCKET GP-GENERAL PURPOSE -FLUSH MOUNTED TEETH
S/N 2DS2725-UP
2.3-CU M (3.0-CU YD) HEAPED CAPACITY BARE BUCKET
AN ATTACHMENT
i01798860 SEBP2639
2171452 BUCKET GP-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-6748 [2] PLATE-WEAR  
2. 217-1455 Y [1] BUCKET AS-GENERAL PURPOSE  
3. 2J-3506 [8] NUT-FULL (3/4-10-THD)  
4. 4F-7827 [8] BOLT-PLOW (3/4-10X2.25-IN)  
5. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26390581
 

217-1453: BUCKET GP-GENERAL PURPOSE

217-1453 BUCKET GP-GENERAL PURPOSE
S/N 2DS2725-UP
2.3-CU M (3.0-CU YD) HEAPED CAPACITY BARE BUCKET
AN ATTACHMENT
i01798863 SEBP2639
2171453 BUCKET GP-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-6748 [2] PLATE-WEAR  
2. 217-1454 Y [1] BUCKET AS-GENERAL PURPOSE  
3. 2J-3506 [8] NUT-FULL (3/4-10-THD)  
4. 4F-7827 [8] BOLT-PLOW (3/4-10X2.25-IN)  
5. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26390582
 

8Y-9401: BUCKET GP-GENERAL PURPOSE

8Y-9401 BUCKET GP-GENERAL PURPOSE
S/N 2DS1-UP
2.3 CU METER (3.0 CU YD) CAPACITY
AN ATTACHMENT
i00417120 SEBP2639
8Y9401 BUCKET GP-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-9110 [1] BUCKET AS-GENERAL PURPOSE  
2. 3A-6294 [4] HINGE AS  
3. 3A-6296 [1] HINGE AS  
4. 3A-8877 [1] HINGE AS  
5. 6V-3607 [1] FILM-NOTICE (BUCKET CORNER GUARD SYSTEM)  
6. 8V-4981 [2] PLATE (RH)  
7. 8V-4982 [2] PLATE (LH)  
8. 8Y-9403 [1] PLATE AS (RH)  
  5V-2772 [1] CORNER (RH)  
  8Y-9107 [1] BAR  
9. 8Y-6263 [1] EDGE-CUTTING  
10. 8Y-9402 [1] PLATE AS (LH)  
  5V-2773 [1] CORNER (LH)  
  8Y-9106 [1] BAR  
11. 9W-6748 [2] PLATE-WEAR  
12. 4F-7827 [8] BOLT-PLOW (3/4-10X2.25-IN)  
13. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
14. 2J-3506 [8] NUT-FULL (3/4-10-THD)  
 

#SEBP26390583
 

8Y-9408: BUCKET GP-GENERAL PURPOSE

8Y-9408 BUCKET GP-GENERAL PURPOSE
S/N 2DS1-UP
2.17 CU M (2.85 CU YD) CAPACITY
AN ATTACHMENT
i00417125 SEBP2639
8Y9408 BUCKET GP-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-9409 [1] BUCKET AS-GENERAL PURPOSE  
2. 3A-8877 [1] HINGE AS  
3. 8V-4981 [2] PLATE (RH)  
4. 8V-4982 [2] PLATE (LH)  
5. 8Y-9107 [1] BAR (RH)  
6. 8Y-9405 [1] EDGE AS-CUTTING  
7. 1U-1354 [8] ADAPTER  
8. 6W-2453 [1] CORNER (LH)  
9. 8Y-9106 [1] BAR (LH)  
10. 6W-2454 [1] CORNER (RH)  
11. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
12. 9W-6748 [2] PLATE-WEAR  
13. 2J-3506 [8] NUT-FULL (3/4-10-THD)  
14. 4F-7827 [8] BOLT-PLOW (3/4-10X2.25-IN)  
 

#SEBP26390584
 

216-9529: BUCKET GP-MULTIPURPOSE

216-9529 BUCKET GP-MULTIPURPOSE
S/N 2DS2725-UP
1.9-CU M (2.5-CU YD)HEAPED CAPACITY BARE BUCKET
PART OF 216-9532 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
i01799894 SEBP2639
2169529 BUCKET GP-MULTIPURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-6184 [1] BOWL AS  
1A. 5G-7610 [1] EDGE-WEAR  
1B. 5G-7611 [2] BIT-END  
1C. 6W-2980 [1] EDGE-CUTTING  
1D. 8P-9770 [1] PLATE  
2. 5B-3807 [1] PLATE-FILLER  
3. 4F-2699 [1] BLOCK-STOP  
4. 3K-8150 [1] LUG  
5. 7X-0365 [2] BOLT (3/4-10X1.5-IN)  
6. 9K-9731 [2] SPACER (20.4X28.5X14.2-MM THK)  
7. 7X-0582 [2] WASHER-HARD (20X44.5X6-MM THK)  
8. 9V-1094 [2] PIN AS  
9. 216-9533 [1] BULLDOZER & BEARING AS  
9A. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
9B. 7K-9204 [8] SEAL-LIP TYPE  
9C. 7P-1576 [4] BUSHING  
10. 3F-5108 [17] BOLT-PLOW (5/8-11X2.25-IN)  
11. 7X-0448 [17] NUT (5/8-11-THD)  
12. 4T-8084 [1] EDGE-CUTTING  
13. 4T-8085 [2] BIT-END  
 

#SEBP26390585
 

5Q-7744: BUCKET GP-MULTIPURPOSE

5Q-7744 BUCKET GP-MULTIPURPOSE -EXTREME SERVICE
S/N 2DS1-UP
2.0 CU M (2.6 CU YD) CAPACITY
PART OF 5Q-7746 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
i01987379 SEBP2639
5Q7744 BUCKET GP-MULTIPURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Q-7742 [1] BOWL AS  
1A. 5V-1783 [1] CORNER (RH)  
1B. 5V-1784 [1] CORNER (LH)  
1C. 143-6178 [2] HINGE  
1D. 6W-2980 [1] EDGE-CUTTING  
1E. 8P-9770 [1] PLATE  
1F. 5G-7610 [1] EDGE-WEAR  
1G. 5G-7611 [2] BIT-END  
1H. 6V-3607 [1] FILM-NOTICE (BUCKET CORNER GUARD SYSTEM)  
2. 5B-3807 B [1] PLATE-FILLER  
3. 4F-2699 B [1] BLOCK-STOP  
4. 3K-8150 B [1] LUG  
5. 7X-0365 [2] BOLT (3/4-10X1.5-IN)  
6. 9K-9731 [2] SPACER (20.4X28.5X14.2-MM THK)  
7. 7X-0582 [2] WASHER-HARD (20X44.5X6-MM THK)  
8. 9V-1094 [2] PIN AS  
9. 5Q-7743 [1] BULLDOZER AS  
9A. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)(BUCKET HINGE)  
9B. 7K-9204 [8] SEAL-LIP TYPE  
9C. 7P-1576 [4] BUSHING  
9D. 8Y-6473 [1] HINGE AS (CENTER, LH)  
9E. 8Y-6474 [1] HINGE AS (CENTER, RH)  
9F. 9V-1109 [4] HINGE AS  
10. 3F-5108 [17] BOLT-PLOW (5/8-11X2.25-IN)  
11. 7X-0448 [17] NUT (5/8-11-THD)  
12. 4T-8084 [1] EDGE-CUTTING  
13. 4T-8085 [2] BIT-END  
  B   USE AS REQUIRED
 

#SEBP26390586
 

8Y-9626: BUCKET GP-MULTIPURPOSE

8Y-9626 BUCKET GP-MULTIPURPOSE
S/N 2DS1-UP
1.9 CUBIC METER (2.5 CUBIC YARD) CAPACITY
PART OF 8Y-9625 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
i00417327 SEBP2639
8Y9626 BUCKET GP-MULTIPURPOSE Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-6184 [1] BOWL AS  
2. 5G-7610 [1] EDGE-WEAR  
3. 5G-7611 [2] BIT-END  
4. 6V-3607 [1] FILM-NOTICE (BUCKET CORNER GUARD SYSTEM)  
5. 6W-2980 [1] EDGE-CUTTING  
6. 8P-9770 [1] PLATE  
7. 4K-0149 [4] PLUG-CUP  
8. 5V-1783 [1] CORNER (RH)  
9. 143-8477 [4] BAR  
10. 143-6178 [2] HINGE  
11. 5V-1784 [1] CORNER (LH)  
12. 110-4429 [1] BULLDOZER AS  
13. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
14. 7K-9204 [8] SEAL-LIP TYPE  
15. 7P-1576 [4] BUSHING  
16. 1V-8098 [4] BLOCK  
17. 4V-4912 [4] BLOCK  
18. 8P-9770 [3] PLATE  
19. 8Y-6473 [1] HINGE AS (CENTER, LH)  
20. 8Y-6474 [1] HINGE AS (CENTER, RH)  
21. 9V-1109 [4] HINGE AS  
22. 9V-1427 [1] BAR  
23. 3F-5108 [17] BOLT-PLOW (5/8-11X2.25-IN)  
24. 3K-8150 B [1] LUG  
25. 4F-2699 B [1] BLOCK-STOP  
26. 4T-8084 [1] EDGE-CUTTING  
27. 4T-8085 [2] BIT-END  
28. 5B-3807 B [1] PLATE-FILLER  
29. 7X-0365 [2] BOLT (3/4-10X1.5-IN)  
30. 7X-0448 [17] NUT (5/8-11-THD)  
31. 7X-0582 [2] WASHER-HARD (20X44.5X6-MM THK)  
32. 9K-9731 [2] SPACER (20.4X28.5X14.2-MM THK)  
33. 9V-1094 [2] PIN AS  
  B   USE AS REQUIRED
 

#SEBP26390587
 

8Y-9624: CONVERSION AR-BUCKET

8Y-9624 CONVERSION AR-BUCKET
S/N 2DS1-UP
MULTI-PURPOSE BUCKET
AN ATTACHMENT
i01442473 SEBP2639
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8Y-9625 Y [1] BUCKET AR-MULTIPURPOSE  
  5G-7496 Y [1] LINES GP-FRONT  
    -OR-
  175-3557 Y [1] LINES GP-FRONT (LIFT ARMS)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26390588
 

3G-3625: EDGE GP-BIT & CUTTING

3G-3625 EDGE GP-BIT & CUTTING
S/N 2DS1-UP
FOR USE WITH MULTIPURPOSE BUCKETS ONLY
AN ATTACHMENT
i00695175 SEBP2639
3G3625 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-8101 [2] EDGE-END  
2. 253-0062 [1] GUARD-BUCKET CORNER (RH)  
3. 253-0063 [1] GUARD-BUCKET CORNER (LH)  
4. 1U-0600 [2] EDGE-CUTTING  
5. 2J-3507 [12] NUT-FULL (1-8-THD)  
6. 3K-9770 [4] NUT-FULL (1-1/4-7-THD)  
7. 4F-4042 [12] BOLT-PLOW (1-8X3-IN)  
8. 8T-9079 [4] BOLT-PLOW (1-1/4-7X3.35-IN)  
 

#SEBP26390589
 

3G-8956: EDGE GP-BIT & CUTTING

3G-8956 EDGE GP-BIT & CUTTING
S/N 2DS1-UP
AN ATTACHMENT
i01112863 SEBP2639
3G8956 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 963C TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-6395 [2] EDGE-END  
2. 253-0064 [1] GUARD-BUCKET CORNER (RH)  
3. 253-0065 [1] GUARD-BUCKET CORNER (LH)  
4. 1U-0593 [2] EDGE-CUTTING  
5. 3K-9770 [16] NUT-FULL (1-1/4-7-THD)  
6. 5P-8823 [12] BOLT-PLOW (1-1/4-7X4.13-IN)  
7. 6V-6535 [4] BOLT-PLOW (1-1/4-7X3.74-IN)  
 

Information:

Operation and Maintenance Manual
Multipurpose Bucket - Lubricate
963C Track-Type Loader
Bucket Teeth and Cutting Edges - Inspect/Replace
963C Track-Type Loader
Bucket Lower Pivot Pin - Lubricate
963C Track-Type Loader
Special Instruction
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket - Remove and Install
963C Track-Type Loader Machine Systems
Bucket Lever and Link - Remove
963C Track-Type Loader Machine Systems
Bucket Lever and Link - Install
963C Track-Type Loader Machine Systems
Bucket Lever and Link - Disassemble
963C Track-Type Loader Machine Systems
Bucket Lever and Link - Assemble
963C Track-Type Loader Machine Systems
Service Magazine
Orifice May Be Added If Bucket Drift Occurs {6104}
2000/01/24
An Improved General Purpose Bucket Is Now Available {6101}
2005/05/23

Caterpillar Parts SIS Catalog 963C :

BUCKET AS-GENERAL PURPOSE
217-1455 BUCKET AS-GENERAL PURPOSE
BUCKET AS-GENERAL PURPOSE
217-1454 BUCKET AS-GENERAL PURPOSE
8Y-9625 BUCKET AR-MULTIPURPOSE
5Q-7746 BUCKET AR-MULTIPURPOSE
5Q-7745 BUCKET AR-MULTIPURPOSE
216-9532 BUCKET AR-MULTIPURPOSE
114-1895 VANDALISM AR
TANK GP-WINDOW WASHER
117-3428 TANK GP-WINDOW WASHER
BUCKET GP-GENERAL PURPOSE
217-1453 BUCKET GP-GENERAL PURPOSE
BUCKET GP-GENERAL PURPOSE
8Y-9401 BUCKET GP-GENERAL PURPOSE
BUCKET GP-GENERAL PURPOSE
8Y-9408 BUCKET GP-GENERAL PURPOSE
BUCKET GP-MULTIPURPOSE
216-9529 BUCKET GP-MULTIPURPOSE
BUCKET GP-MULTIPURPOSE
5Q-7744 BUCKET GP-MULTIPURPOSE
BUCKET GP-MULTIPURPOSE
8Y-9626 BUCKET GP-MULTIPURPOSE
8Y-9624 CONVERSION AR-BUCKET
EDGE GP-BIT & CUTTING
3G-3625 EDGE GP-BIT & CUTTING

Truck sale:

Caterpillar 963C
 
Caterpillar 963C
- track loaders
FABICK CAT
Caterpillar 963C, track loaders, Construction
54,000 
Caterpillar 963C, track loaders, Construction
- track loaders
FABICK CAT
Caterpillar 963C, Wheel Loaders, Construction
137,500 
Caterpillar 963C, Wheel Loaders, Construction
- Wheel Loaders
QUINN COMPANY
Caterpillar 963C, track loaders, Construction
116,000 
Caterpillar 963C, track loaders, Construction
- track loaders
CARTER MACHINERY COMPANY, INC.
Caterpillar 963C
 
Caterpillar 963C
- track loaders
FABICK CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.