AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

450-1415 CARTRIDGE GP-TURBOCHARGER S/N 67Z1302-UP PART OF 120-9187, 134-5402, 450-6710 TURBOCHARGER GP ALSO AN ATTACHMENT 3512


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
MUFFLER GP
LINES GP-EXHAUST

GEN SET ENGINE 3512 GEN SET ENGINE 67Z
 3512 Generator Set Engine 67Z00772-UP SEBP2640 3512 67Z   (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
7N-8640 LINES GP-TURBOCHARGER OIL
118-2988 CARTRIDGE GP-TURBOCHARGER
450-1415 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
6N-7960 CARTRIDGE GP-TURBOCHARGER
LINES GP-TURBOCHARGER AIR
2W-9588 LINES GP-TURBOCHARGER AIR
LINES GP-TURBOCHARGER AIR
4W-0712 LINES GP-TURBOCHARGER AIR
 

#SEBP26400520
 

450-1415: CARTRIDGE GP-TURBOCHARGER

450-1415 CARTRIDGE GP-TURBOCHARGER
S/N 67Z1302-UP
PART OF 120-9187, 134-5402, 450-6710 TURBOCHARGER GP
ALSO AN ATTACHMENT
i06998939 SEBP2640
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  496-5224 [2] BEARING-JOURNAL  
  496-5225 [2] BEARING-JOURNAL  
  496-5226 [2] BEARING-JOURNAL  
  496-5227 [2] BEARING-JOURNAL  
  496-5228 [2] BEARING-JOURNAL  
  496-5229 [2] BEARING-JOURNAL  
  211-2261 [1] BEARING-THRUST  
  4P-3819 M [4] BOLT (M6X1X22-MM)  
  223-4291 [1] COLLAR-THRUST  
  9M-8915 [3] RING-RETAINING  
  1P-1120 [1] RING-SEAL  
  9M-8919 [2] RING-SEAL  
  223-4289 [1] SEAL RING-PISTON  
  461-3792 [3] WASHER (WEAR)  
  M   METRIC PART
 

#SEBP26400521
 

6N-7960: CARTRIDGE GP-TURBOCHARGER

6N-7960 CARTRIDGE GP-TURBOCHARGER
S/N 67Z772-1301
PART OF 1W-6551, 1W-8432, 7W-8008, 7W-8010, 7W-8011 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00389272 SEBP2640
6N7960 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7962 [1] PLATE AS-BACKING  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [3] STUD-DRIVE  
2. 1P-1120 [1] RING-SEAL  
3. 6N-5004 [1] BEARING-THRUST  
4. 7N-3759 [1] RING-PISTON  
5. 9Y-1936 [1] SHROUD  
6. 9N-2043 [1] WHEEL & SHAFT AS  
7. 9M-8915 [3] RING-RETAINING  
8. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
  7W-2368 C [1] RING-SEAL  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9N-2046 [1] SPACER-THRUST  
  9M-8919 [2] RING-SEAL  
11. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
12. 4P-3429 [1] WHEEL-COMPRESSOR  
13. 0S-1616 [4] BOLT (1/4-20X1-IN)  
  9N-2036 [4] PLATE-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING  
    (KIT INCLUDES TWO BEARINGS)
  7C-7446 AB KIT-BEARING (0.51-MM OS)  
  7C-7447 AB KIT-BEARING (0.51-MM OS, 0.25-MM US)  
  7N-3194 AB KIT-BEARING (0.25-MM OS, 0.25-MM US)  
  8N-4157 AB KIT-BEARING (0.25-MM OS)  
  8N-4160 AB KIT-BEARING (0.25-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP26400522
 

249-0470: CONVERTER GP-CATALYTIC

249-0470 CONVERTER GP-CATALYTIC
AN ATTACHMENT
i02103600 SEBP2640
2490470 CONVERTER GP-CATALYTIC Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 249-0436 [1] INSULATION AS  
2. 256-0328 [1] CONVERTER AS  
2A. 249-0379 [1] CATALYST  
 

#SEBP26400523
 

7W-0288: ELBOW GP-EXHAUST

7W-0288 ELBOW GP-EXHAUST
WATERCOOLED
AN ATTACHMENT
i00431196 SEBP2640
7W0288 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-4302 [2] COLLAR-SEAL  
2. 1W-5941 [1] COVER  
3. 1W-6737 [1] HOUSING  
4. 1W-9451 [2] SEAL-TURBOCHARGER  
6. 5P-0599 [2] CLAMP-BAND  
7. 7E-6016 [2] GASKET  
8. 7E-6017 [1] COVER  
9. 7N-3368 [1] GASKET  
10. 7N-6222 [2] ADAPTER-TURBOCHARGER  
11. 7N-7130 [1] TUBE AS  
12. 7N-7415 [1] FITTING  
13. 7W-0290 [1] ELBOW AS-EXHAUST  
  4F-5695 [3] PLUG-CUP  
14. 8N-8954 [1] TUBE AS  
15. 009-4440 [1] CONNECTOR  
16. 0S-1594 [7] BOLT (3/8-16X1-IN)  
17. 2A-4639 [4] BOLT (3/8-16X1.625-IN)  
18. 2P-1312 [1] ELBOW  
19. 3B-0551 [1] PLUG-PIPE  
20. 3J-5389 [2] PLUG (EXTERNAL)  
21. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 7L-4773 [2] SEAL-O-RING  
 

#SEBP26400524
 

8N-8487: ELBOW GP-EXHAUST

8N-8487 ELBOW GP-EXHAUST
FOR USE WITH AIR STARTING MOTOR
AN ATTACHMENT
i00415396 SEBP2640
8N8487 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4566 [2] BOLT (1/2-13X3.5-IN)  
2. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 1D-4569 [2] BOLT (1/2-13X4.25-IN)  
4. 6N-4857 [1] FITTING  
5. 8N-8447 [1] ELBOW  
6. 8N-8452 [1] GASKET  
7. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
 

#SEBP26400525
 

5L-6954: ELBOW-EXHAUST

5L-6954 ELBOW-EXHAUST
12-IN
AN ATTACHMENT
i00925588 SEBP2640
5L6954 ELBOW-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP26400526
 

5N-2458: ELBOW-EXHAUST

5N-2458 ELBOW-EXHAUST
10-IN
AN ATTACHMENT
i00553561 SEBP2640
5N2458 ELBOW-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP26400527
 

5N-2457: FITTING GP-EXHAUST

5N-2457 FITTING GP-EXHAUST -FLEXIBLE
203.2-MM
AN ATTACHMENT
i00384675 SEBP2640
5N2457 FITTING GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-6045 [1] BELLOWS AS  
2. 245-3512 [1] GASKET (EXHAUST)  
3. 3V-3308 [8] WASHER-HARD (10.2X20.5X2.5-MM THK)  
4. 0S-1588 BL [8] BOLT (3/8-16X1.25-IN)  
5. 0S-1571 BJ [8] BOLT (3/8-16X1.75-IN)  
6. 9S-8752 BJ [8] NUT-FULL (3/8-16-THD)  
  B   USE AS REQUIRED
  J   FOR USE WITH HOT EXHAUST
  L   FOR USE WITH WATER COOLED EXHAUST
 

#SEBP26400528
 

5N-9527: FITTING GP-EXHAUST

5N-9527 FITTING GP-EXHAUST -FLEXIBLE
305-MM
FOR USE WITH WATERCOOLED, HOT EXHAUST STACKS
AN ATTACHMENT
i00391425 SEBP2640
5N9527 FITTING GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 207-1332 [1] BELLOWS AS  
2. 495-4092 [1] GASKET-EXHAUST  
3. 5L-4398 B [12] BOLT (1/2-13X2.25-IN)  
4. 1F-7958 B [12] NUT-FULL (1/2-13-THD)  
5. 5P-8245 B [24] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 165-3931 BJ [12] BOLT (3/8-16X1.75-IN)  
7. 9S-8752 BJ [12] NUT-FULL (3/8-16-THD)  
8. 5M-2894 BJ [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  J   FOR USE WITH 1W5532 ELBOW OR 7N6959 ADAPTER
 

#SEBP26400529
 

7N-6967: FITTING GP-EXHAUST

7N-6967 FITTING GP-EXHAUST -FLEXIBLE
305-MM
AN ATTACHMENT
i00410465 SEBP2640
7N6967 FITTING GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-6959 [1] ADAPTER  
2. 245-3512 [1] GASKET (EXHAUST)  
3. 0S-1591 B [8] BOLT (3/8-16X1.5-IN)  
4. 2B-0858 [1] PLUG-PIPE  
5. 3V-3308 B [8] WASHER-HARD (10.2X20.5X2.5-MM THK)  
6. 9S-8752 [8] NUT-FULL (3/8-16-THD)  
  B   USE AS REQUIRED
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/08/25
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage
1984/01/18
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers
1988/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
New Gasket Used In Turbocharger Groups{1052,1061}
1997/03/01
Improved Clamps For Turbocharger Exhaust Couplings Reduce Exhaust Leaks {1052}
1997/08/01
New Support Assembly (Turbocharger) Added {1059}
1998/01/20
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Improved Turbocharger Water Lines are Used {1052, 1059, 1380}
2004/07/01
New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Hole in the Turbine Housing of the Turbocharger {1052}
2006/06/26
Packaging the Turbocharger {1052}
2007/02/26
Cat<SUP>&reg;</SUP> Reman Now Offers New Turbocharger and Cartridge Groups for Certain Commercial Engines {1052, 1053}
2014/09/12
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbocharger
3500 Generator Set Engines
Service Letter-China
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Systems Operation
Turbocharger
3500 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
Disassembly and Assembly
Turbochargers
3500 GENERATOR SET ENGINES
Service Magazine
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage{1052,1061}
1983/12/12
Water Cooled Exhaust Elbow Groups Available{1052,1061}
1985/06/03
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers{1059,1070}
1988/09/19
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3512 :

118-2988 CARTRIDGE GP-TURBOCHARGER
AIR CLEANER GP
8N-9303 AIR CLEANER GP
AIR CLEANER GP
8N-9302 AIR CLEANER GP
AIR CLEANER GP
8N-3378 AIR CLEANER GP
AIR CLEANER GP
5N-7904 AIR CLEANER GP
AIR CLEANER GP
5N-7822 AIR CLEANER GP
AIR CLEANER GP
328-5302 AIR CLEANER GP
AIR CLEANER GP
137-5554 AIR CLEANER GP
CARTRIDGE GP-TURBOCHARGER
6N-7960 CARTRIDGE GP-TURBOCHARGER
CONVERTER GP-CATALYTIC
249-0470 CONVERTER GP-CATALYTIC
ELBOW GP-EXHAUST
7W-0288 ELBOW GP-EXHAUST
ELBOW GP-EXHAUST
8N-8487 ELBOW GP-EXHAUST
ELBOW-EXHAUST
5L-6954 ELBOW-EXHAUST
ELBOW-EXHAUST
5N-2458 ELBOW-EXHAUST
FITTING GP-EXHAUST
5N-2457 FITTING GP-EXHAUST
FITTING GP-EXHAUST
5N-9527 FITTING GP-EXHAUST

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.