221-4480 CYLINDER BLOCK GP S/N 6JK1603-UP PART OF 221-4481 CYLINDER BLOCK GP ALSO AN ATTACHMENT IT38G

BASIC ENGINE

CYLINDER BLOCK GP

0. 221-4480 CYLINDER B
1. 221-4481 CYLINDER B

CYLINDER HEAD GP

2. 126-0496 CYLINDER H
3. 140-7373 CYLINDER H
4. 190-9066 CYLINDER H
5. 126-0483 CYLINDER H
6. 129-1150 CYLINDER H
7. 140-7370 CYLINDER H
8. 140-7371 CYLINDER H
9. 160-5130 CYLINDER H
0. INFORMATION

INTEGRATED TOOLCARRIER IT38G INTEGRATED TOOLCARRIER 1CW
IT38G Integrated Toolcarrier 1CW00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2643 IT38G 1CW (1998)

BASIC ENGINE

CYLINDER BLOCK GP

141-8282 CYLINDER BLOCK GP

141-8283 CYLINDER BLOCK GP

221-4480 CYLINDER BLOCK GP

221-4481 CYLINDER BLOCK GP

156-0228 PLUG GP-CYLINDER BLOCK

#SEBP26430040

221-4480: CYLINDER BLOCK GP

CYLINDER BLOCK GP

221-4480 CYLINDER BLOCK GP
S/N 6JK1603-UP
PART OF 221-4481 CYLINDER BLOCK GP
ALSO AN ATTACHMENT

i01974590 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
2.	7E-2968	[7]	CAP-CRANKSHAFT BEARING
3.	9X-8916 M	[14]	BOLT (M16X2X140-MM)
4.	5P-8247	[14]	WASHER-HARD (17X32X3.5-MM THK)
	M		METRIC PART

#SEBP26430041

221-4481: CYLINDER BLOCK GP

CYLINDER BLOCK GP

221-4481 CYLINDER BLOCK GP
S/N 6JK1603-UP
PART OF 129-1165 CYLINDER BLOCK GP
ALSO AN ATTACHMENT

i01974526 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	221-4480 Y	[1]	CYLINDER BLOCK GP
2.	2M-6471	[2]	PLUG-CUP
3.	3H-5552	[1]	PLUG-CUP
4.	9S-8006	[1]	PLUG (7/8-14-THD)
5.	2M-9780	[1]	SEAL-O-RING
6.	216-5586	[1]	BUSHING (CAMSHAFT)
7.	2W-7213	[6]	BUSHING (CAMSHAFT)

	107-7604 ABF		SLEEVE-CYLINDER
			(FOR SALVAGE OF CYLINDER BORE IN BLOCK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	Y		SEPARATE ILLUSTRATION

#SEBP26430042

126-0496: CYLINDER HEAD AS

CYLINDER HEAD AS

126-0496 CYLINDER HEAD AS
S/N 6JK1-3330
PART OF 126-0483 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@140-7373@@@@@
ALSO AN ATTACHMENT

i00513252 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	Z	[1]	CYLINDER HEAD
2.	1W-2713	[6]	INSERT-VALVE SEAT (EXHAUST)
3.	130-9004	[6]	INSERT-VALVE SEAT (INLET)
4.	119-3061	[6]	SLEEVE
5.	8M-5860	[6]	PLUG-CUP
	Z		NOT SERVICED SEPARATELY

#SEBP26430043

140-7373: CYLINDER HEAD AS

CYLINDER HEAD AS

140-7373 CYLINDER HEAD AS
S/N 6JK1-UP
FIELD REPLACEMENT FOR @@@@@126-0496@@@@@, @@@@@190-9066@@@@@

i00948800 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-8848	[12]	GUIDE-VALVE
2.	9S-8003	[3]	PLUG (1/2-20-THD)
3.	1J-9671	[3]	SEAL-O-RING
4.	2M-6471	[2]	PLUG-CUP
5.	119-3036	[12]	SEAL-VALVE STEM
6.	190-9066 Y	[1]	CYLINDER HEAD AS
7.	3J-7354	[1]	SEAL-O-RING
8.	9S-8002	[1]	PLUG (7/16-20-THD)
	Y		SEPARATE ILLUSTRATION

#SEBP26430044

190-9066: CYLINDER HEAD AS

CYLINDER HEAD AS

190-9066 CYLINDER HEAD AS
S/N 6JK3331-UP
PART OF 140-7373 CYLINDER HEAD AS, 140-7371 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@140-7373@@@@@
ALSO AN ATTACHMENT

i01504050 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-2713	[6]	INSERT-VALVE SEAT (EXHAUST)
2.	163-9063	[6]	INSERT-VALVE SEAT (INLET)
3.	119-3061	[6]	SLEEVE
4.	8M-5860	[6]	PLUG-CUP

#SEBP26430045

126-0483: CYLINDER HEAD GP

CYLINDER HEAD GP

126-0483 CYLINDER HEAD GP
S/N 6JK1-3330
PART OF 129-1150 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5130@@@@@
ALSO AN ATTACHMENT

i00513240 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	126-0496 Y	[1]	CYLINDER HEAD AS
2.	113-6180	[6]	VALVE-INLET
3.	136-0819	[6]	VALVE-EXHAUST
4.	1W-2715	[24]	LOCK-RETAINER
5.	7C-4273	[12]	SPRING-VALVE
6.	119-3036	[12]	SEAL-VALVE STEM
7.	9Y-8848	[12]	GUIDE-VALVE
8.	7E-7779	[12]	RETAINER-SPRING
	Y		SEPARATE ILLUSTRATION

#SEBP26430046

129-1150: CYLINDER HEAD GP

CYLINDER HEAD GP

129-1150 CYLINDER HEAD GP
S/N 6JK1-3330
PART OF 139-7667 ENGINE AR, 143-2935, 154-6034 ENGINE AR-CORE
ALSO AN ATTACHMENT

i00695275 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-9671	[3]	SEAL-O-RING
2.	126-0483 Y	[1]	CYLINDER HEAD GP
3.	126-0529	[14]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
4.	8T-3282	[1]	WASHER-HARD (22X35X3.5-MM THK)
5.	127-4836 M	[1]	BOLT (M20X2.5X160-MM)
6.	2M-6471	[2]	PLUG-CUP
7.	144-3450	[1]	GASKET-CYLINDER HEAD
8.	8T-5030 M	[6]	BOLT (M10X1.5X120-MM)
9.	9S-8003	[3]	PLUG (1/2-20-THD)
10.	3J-7354	[1]	SEAL-O-RING
11.	9S-8002	[1]	PLUG (7/16-20-THD)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP26430047

140-7370: CYLINDER HEAD GP

CYLINDER HEAD GP

140-7370 CYLINDER HEAD GP
S/N 6JK3331-UP
PART OF 139-7667 ENGINE AR, 143-2935, 154-6034, 196-4105, 197-3541, 197-3543 ENGINE AR-CORE
ALSO AN ATTACHMENT

i00947818 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-9671	[3]	SEAL-O-RING
2.	140-7371 Y	[1]	CYLINDER HEAD GP
3.	3J-7354	[1]	SEAL-O-RING
4.	9S-8002	[1]	PLUG (7/16-20-THD)
5.	2M-6471	[2]	PLUG-CUP
6.	205-1293	[1]	GASKET-CYLINDER HEAD
7.	8T-5030 M	[6]	BOLT (M10X1.5X120-MM)
8.	9S-8003	[3]	PLUG (1/2-20-THD)
9.	127-4836 M	[14]	BOLT (M20X2.5X160-MM)
	8T-3282	[14]	WASHER-HARD (22X35X3.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP26430048

140-7371: CYLINDER HEAD GP

CYLINDER HEAD GP

140-7371 CYLINDER HEAD GP
S/N 6JK3331-UP
PART OF 140-7370, 160-5130 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5130@@@@@
ALSO AN ATTACHMENT

i00948801 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	190-9066 Y	[1]	CYLINDER HEAD AS
2.	161-4280	[6]	VALVE-INLET
3.	136-0819	[6]	VALVE-EXHAUST
4.	1W-2715	[24]	LOCK-RETAINER
5.	7E-7779	[12]	RETAINER-SPRING
6.	7C-4273	[12]	SPRING-VALVE
7.	9Y-8848	[12]	GUIDE-VALVE
8.	119-3036	[12]	SEAL-VALVE STEM
	Y		SEPARATE ILLUSTRATION

#SEBP26430049

160-5130: CYLINDER HEAD GP

CYLINDER HEAD GP

160-5130 CYLINDER HEAD GP
S/N 6JK1-3330
FIELD REPLACEMENT FOR @@@@@126-0483@@@@@, @@@@@140-7371@@@@@

i01069403 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-9671	[3]	SEAL-O-RING
2.	140-7371 Y	[1]	CYLINDER HEAD GP
3.	2M-6471	[2]	PLUG-CUP
4.	9S-8003	[3]	PLUG (1/2-20-THD)
5.	9S-8002	[1]	PLUG (7/16-20-THD)
6.	3J-7354	[1]	SEAL-O-RING
	Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Special Instruction

Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}

Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Technical Information Bulletin

Blowby Values On 3114/3116/3126 Gosselies Built Vehicle Application Engines
Blowby Values On 3114/3116/3126 Gosselies Built Vehicle Application Engines

Tool Operating Manual

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Testing and Adjusting

Cylinder Block - Inspect
3114, 3116, and 3126 Engines

Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines

Main Bearings - Inspect
3114, 3116, and 3126 Engines

Disassembly and Assembly

Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Service Magazine

Use 142-2285 Stress Plate for Honing Individual Engine Cylinders {1223}
1998/08/03

New Main Bearing Material{1203}
1999/05/24

Correction to Guideline for Reusable Parts and Salvage Operations, SEBF8192-02 {1201}
2000/01/31

Correction to Guideline for Reusable Parts and Salvage Operations, SEBF8277-00 {1201}
2000/02/21

Caterpillar Parts SIS Catalog IT38G :

141-8283 CYLINDER BLOCK GP

141-8282 CYLINDER BLOCK GP

129-1165 CYLINDER BLOCK GP

129-1163 CYLINDER BLOCK GP

141-8281 CYLINDER BLOCK AS

113-6087 CRANKSHAFT GP

9Y-1224 COVER GP-VALVE MECHANISM

221-4481 CYLINDER BLOCK GP

126-0496 CYLINDER HEAD AS

140-7373 CYLINDER HEAD AS

190-9066 CYLINDER HEAD AS

126-0483 CYLINDER HEAD GP

129-1150 CYLINDER HEAD GP

140-7370 CYLINDER HEAD GP

140-7371 CYLINDER HEAD GP

Truck sale:

Caterpillar IT38G
- Wheel Loaders
ZIEGLER CAT

Caterpillar IT38G II, Misc Forklifts, Material handling equipment

30.773

Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung

63.000

Caterpillar IT38G II 3, Radlader, Bau-Und Bergbauausrüstung

Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung