AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

168-8000 FILLER GP-POWER TRAIN OIL S/N 1CW1-UP PART OF 144-5458, 157-2213, 204-6032 CONVERSION AR-MACHINE AN ATTACHMENT IT38G


POWER TRAIN
FILLER GP-POWER TRAIN OIL
FILTER GP
DIFFERENTIAL & BEVEL GEAR GP
GEAR GP

INTEGRATED TOOLCARRIER IT38G INTEGRATED TOOLCARRIER 1CW
 IT38G Integrated Toolcarrier 1CW00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2643 IT38G 1CW   (1998)

POWER TRAIN

FILLER GP-POWER TRAIN OIL
COVER GP-XMSN OIL FILLER CAP
7K-5636 COVER GP-XMSN OIL FILLER CAP
FILLER GP-POWER TRAIN OIL
103-6098 FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
149-2958 FILLER GP-POWER TRAIN OIL
168-8000 FILLER GP-POWER TRAIN OIL
 

#SEBP26430340
 

168-8000: FILLER GP-POWER TRAIN OIL

168-8000 FILLER GP-POWER TRAIN OIL
S/N 1CW1-UP
PART OF 144-5458, 157-2213, 204-6032 CONVERSION AR-MACHINE
AN ATTACHMENT
i01028468 SEBP2643
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4B-9782 [1] BALL  
  8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  8T-4185 M [2] BOLT (M10X1.5X50-MM)  
  8T-4186 M [2] BOLT (M10X1.5X40-MM)  
  5K-1568 [1] CAP-FILLER  
  7S-8920 [1] CLIP (SLOT)  
  7S-8921 [1] CLIP (TAB)  
  124-0174 [1] CLIP (LOOP)  
  4K-5537 [1] GASKET  
  9C-7456 [1] GAUGE  
  5V-8451 [1] HASP  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  5P-8502 [1] PADLOCK GP  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
  6H-5139 [1] PLATE-PRESSURE  
  1P-3707 [1] SEAL-RECTANGULAR  
  6F-5188 [1] SEAL-RING  
  149-2957 [1] TUBE AS  
  106-8886 [1] TUBE AS  
  3K-6905 [1] VALVE-BREATHER  
  8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
  A   NOT PART OF THIS GROUP
  M   METRIC PART
 

#SEBP26430341
 

139-1450: FILTER & LINES GP-TRANSMISSION

139-1450 FILTER & LINES GP-TRANSMISSION
S/N 1CW1-99999
PART OF 141-9548, 170-0226 POWER TRAIN AR
ALSO AN ATTACHMENT
i00614846 SEBP2643
1391450 FILTER & LINES GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
2. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
3. 4J-0520 [2] SEAL-O-RING  
4. 8C-3206 [4] FLANGE-HALF  
5. 5K-9090 [3] SEAL-O-RING  
6. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
7. 139-1451 [1] TUBE AS  
8. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
9. 105-3018 [1] TUBE AS  
10. 3D-2824 [2] SEAL-O-RING  
11. 8T-1889 [1] CLIP (SLOT)  
12. 8T-1890 [1] CLIP (TAB)  
13. 105-3014 I [1] HOSE AS  
14. 8T-6684 [1] ELBOW  
15. 122-6456 Y [1] FILTER GP-OIL (POWER TRAIN)  
16. 149-7544 I [1] HOSE AS  
17. 8T-7970 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26430342
 

122-6456: FILTER GP-OIL

122-6456 FILTER GP-OIL -POWER TRAIN
S/N 1CW1-99999
PART OF 139-1450 FILTER & LINES GP-TRANSMISSION
ALSO AN ATTACHMENT
i00671973 SEBP2643
1226456 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8878 [1] FILTER-OIL (ADVANCED EFFICIENCY)  
2. 8C-3446 [1] VALVE-SAMPLING  
3. 8C-3447 [1] CAP-DUST  
4. 3J-7354 [1] SEAL-O-RING  
5. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
6. 6V-0852 [1] CAP-DUST  
7. 3J-1907 [1] SEAL-O-RING  
 

#SEBP26430343
 

100-3810: GEAR GP-BEVEL & PINION

100-3810 GEAR GP-BEVEL & PINION -FIXED AXLE
S/N 1CW1-499
PART OF 100-3809, 111-0870, 152-8867 AXLE AR-FIXED
ALSO AN ATTACHMENT
i01555637 SEBP2643
1003810 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-2694 [1] CONE-BEARING  
2. 1P-2695 [1] CUP-BEARING  
3. 5L-2031 [1] CUP-BEARING  
4. 5L-2030 [1] CONE-BEARING  
5. 6W-1638 [1] WASHER (71X95X5-MM THK)  
6. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
7. 9U-1913 [1] SLEEVE AS  
8. 030-0060 [1] CUP-BEARING  
9. 9U-1912 [1] SLEEVE AS  
10. 6Y-2540 [1] CUP-BEARING  
11. 4E-3897 [2] LOCK  
12. 6Y-2539 [1] CONE-BEARING  
13. 030-0061 [1] CONE-BEARING  
14. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
15. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
16. 158-6479 [1] GEAR SET-BEVEL  
17. 9X-6492 M [16] BOLT (M16X2X160-MM)  
18. 9X-2619 [4] PIN-SPRING  
19. 9X-2620 [4] PIN-SPRING  
21. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
22. 9V-2429 [1] RETAINER  
23. 2H-3088 [1] SEAL-O-RING  
24. 127-1693 CJ [1] YOKE  
25. 4E-4031 [2] PIN  
26. 4E-3896 M [2] BOLT (M6X1X14-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  J   TO BE USED WITH 1234003 SEAL-LIP
  M   METRIC PART
 

#SEBP26430344
 

167-0979: GEAR GP-BEVEL & PINION

167-0979 GEAR GP-BEVEL & PINION -FIXED AXLE
S/N 1CW500-UP
PART OF 167-0981, 194-2230 AXLE AR-FIXED
ALSO AN ATTACHMENT
i01401586 SEBP2643
1670979 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-2694 [1] CONE-BEARING  
2. 1P-2695 [1] CUP-BEARING  
3. 5L-2031 [1] CUP-BEARING  
4. 5L-2030 [1] CONE-BEARING  
5. 6W-1638 [1] WASHER (71X95X5-MM THK)  
6. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
7. 9U-1913 [1] SLEEVE AS  
  030-0060 [1] CUP-BEARING  
8. 9U-1912 [1] SLEEVE AS  
  6Y-2540 [1] CUP-BEARING  
9. 4E-4031 [2] PIN  
10. 4E-3896 M [2] BOLT (M6X1X14-MM)  
11. 4E-3897 [2] LOCK  
12. 6Y-2539 [1] CONE-BEARING  
13. 030-0061 [1] CONE-BEARING  
14. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
15. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
16. 158-6479 [1] GEAR SET-BEVEL  
17. 9X-6492 M [16] BOLT (M16X2X160-MM)  
18. 9X-2619 [4] PIN-SPRING  
19. 9X-2620 [4] PIN-SPRING  
21. 8T-0372 M [1] BOLT (M12X1.75X90-MM)  
22. 9V-2429 [1] RETAINER  
23. 2H-3088 [1] SEAL-O-RING  
24. 166-6757 [1] YOKE  
  M   METRIC PART
 

#SEBP26430345
 

167-0980: GEAR GP-BEVEL & PINION

167-0980 GEAR GP-BEVEL & PINION -OSCILLATING AXLE
S/N 1CW500-UP
PART OF 167-0982, 194-2231, 194-2232 AXLE AR-OSCILLATING
ALSO AN ATTACHMENT
i01401576 SEBP2643
1670980 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-1913 [1] SLEEVE AS  
2. 030-0060 [1] CUP-BEARING  
3. 030-0061 [1] CONE-BEARING  
4. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
5. 4E-3897 [2] LOCK  
6. 4E-3896 M [2] BOLT (M6X1X14-MM)  
7. 4E-4031 [2] PIN  
8. 1P-2694 [1] CONE-BEARING  
9. 1P-2695 [1] CUP-BEARING  
10. 5L-2030 [1] CONE-BEARING  
11. 5L-2031 [1] CUP-BEARING  
12. 6W-1638 [1] WASHER (71X95X5-MM THK)  
13. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
14. 158-6482 [1] GEAR SET-BEVEL  
16. 9X-2619 [4] PIN-SPRING  
17. 9X-2620 [4] PIN-SPRING  
18. 6Y-2539 [1] CONE-BEARING  
19. 9X-6492 M [16] BOLT (M16X2X160-MM)  
20. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
21. 9U-1912 [1] SLEEVE AS  
22. 6Y-2540 [1] CUP-BEARING  
23. 159-1846 [1] YOKE AS  
24. 4E-9413 [1] GUARD  
25. 160-4816 [1] KIT-SERVICE  
    (INCLUDES DUST CUP, SEAL & SNAP RING)
  M   METRIC PART
 

#SEBP26430346
 

9C-8170: GEAR GP-BEVEL & PINION

9C-8170 GEAR GP-BEVEL & PINION
S/N 1CW1-499
OSCILLATING AXLE, FOR THE COMPLETE REPLACEMENT OF THE DIFFERENTIAL BEARINGS,
PART OF 100-3700, 111-0869, 152-8868 AXLE AR-OSCILLATING
ALSO AN ATTACHMENT
i01589457 SEBP2643
9C8170 GEAR GP-BEVEL & PINION Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-1913 [1] SLEEVE AS  
2. 030-0060 [1] CUP-BEARING  
3. 030-0061 [1] CONE-BEARING  
4. 4E-4030 [1] NUT-ADJUSTMENT (M160X2-THD)  
5. 4E-3897 [2] LOCK  
6. 4E-3896 M [2] BOLT (M6X1X14-MM)  
7. 4E-4031 [2] PIN  
8. 1P-2694 [1] CONE-BEARING  
9. 1P-2695 [1] CUP-BEARING  
10. 5L-2030 [1] CONE-BEARING  
11. 5L-2031 [1] CUP-BEARING  
12. 6W-1638 [1] WASHER (71X95X5-MM THK)  
13. 9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
14. 158-6482 [1] GEAR SET-BEVEL  
16. 9X-2619 [4] PIN-SPRING  
17. 9X-2620 [4] PIN-SPRING  
18. 6Y-2539 [1] CONE-BEARING  
19. 9X-6492 M [16] BOLT (M16X2X160-MM)  
20. 4E-4029 [1] NUT-ADJUSTMENT (M190X2 SPL-THD)  
21. 9U-1912 [1] SLEEVE AS  
22. 6Y-2540 [1] CUP-BEARING  
23. 127-1694 CJ [1] YOKE AS  
24. 4E-9413 [1] GUARD  
25. 160-4816 [1] KIT-SERVICE  
  C   CHANGE FROM PREVIOUS TYPE
  J   FOR USE WITH 123-4003 SEAL-LIP
  M   METRIC PART
 

#SEBP26430347
 

170-1857: GEAR GP-OUTPUT TRANSFER

170-1857 GEAR GP-OUTPUT TRANSFER
S/N BJJ1-UP; CGJ323-1333
PARKING BRAKE
PART OF 170-1856, 196-2780 TRANSMISSION AR
ALSO AN ATTACHMENT
i01412326 SEBP2643
1701857 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3088 [2] SEAL-O-RING  
2. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
3. 4S-5824 [2] RETAINER  
4. 2P-8987 [2] CONE-BEARING  
5. 6Y-8293 [1] SHAFT-OUTPUT  
6. 3T-6581 [1] GEAR (49-TEETH)  
7. 2P-8986 [1] CUP-BEARING  
8. 6V-7991 [1] SEAL-O-RING  
9. 9X-7743 [1] SEAL-LIP TYPE  
10. 103-1712 [1] DRUM  
11. 118-2291 Y [1] BRAKE GP-PARKING  
12. 6V-8201 M [4] BOLT-SOCKET HEAD (M16X2X45-MM)  
13. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 6V-3668 M [8] BOLT (M12X1.75X30-MM)  
15. 142-4247 [1] CAGE-BEARING  
16. 8E-9550 [1] SPACER (61X75X9.85-MM THK)  
17. 6Y-4873 [1] LEVER  
18. 166-6762 [1] YOKE-BRAKE  
19. 8E-4950 [1] YOKE  
20. 6V-4249 M [1] BOLT (M10X1.5X50-MM)  
21. 2Y-5829 M [1] NUT (M10X1.5-THD)  
22. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
23. 9X-8268 [4] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26430348
 

170-1857: GEAR GP-OUTPUT TRANSFER

170-1857 GEAR GP-OUTPUT TRANSFER
S/N CGJ1334-UP; CWM1-99999
PARKING BRAKE
PART OF 196-2780 TRANSMISSION AR
i01536968 SEBP2643
1701857 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3088 [2] SEAL-O-RING  
2. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
3. 4S-5824 [2] RETAINER  
4. 2P-8987 [2] CONE-BEARING  
5. 6Y-8293 [1] SHAFT-OUTPUT  
6. 3T-6581 [1] GEAR (49-TEETH)  
7. 2P-8986 [1] CUP-BEARING  
8. 6V-7991 [1] SEAL-O-RING  
9. 9X-7743 [1] SEAL-LIP TYPE  
10. 103-1712 [1] DRUM  
11. 200-1315 CY [1] BRAKE GP-PARKING  
12. 6V-8201 M [4] BOLT-SOCKET HEAD (M16X2X45-MM)  
13. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 6V-3668 M [8] BOLT (M12X1.75X30-MM)  
15. 142-4247 [1] CAGE-BEARING  
16. 8E-9550 [1] SPACER (61X75X9.85-MM THK)  
17. 6Y-4873 [1] LEVER  
18. 166-6762 [1] YOKE-BRAKE  
19. 8E-4950 [1] YOKE  
20. 6V-4249 M [1] BOLT (M10X1.5X50-MM)  
21. 2Y-5829 M [1] NUT (M10X1.5-THD)  
22. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
23. 9X-8268 [4] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26430349
 

8E-3132: GEAR GP-OUTPUT TRANSFER

8E-3132 GEAR GP-OUTPUT TRANSFER
S/N 7ZX4601-99999
PARKING BRAKE
PART OF 6Y-8245 TRANSMISSION AR
i00695218 SEBP2643
8E3132 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3088 [2] SEAL-O-RING  
2. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
3. 4S-5824 [2] RETAINER  
4. 2P-8987 [2] CONE-BEARING  
5. 6Y-8293 [1] SHAFT-OUTPUT  
6. 3T-6581 [1] GEAR (49-TEETH)  
7. 2P-8986 [1] CUP-BEARING  
8. 6V-7991 [1] SEAL-O-RING  
9. 9X-7743 [1] SEAL-LIP TYPE  
10. 103-1712 [1] DRUM  
11. 118-2291 Y [1] BRAKE GP-PARKING  
12. 8T-6594 M [4] BOLT-SOCKET HEAD (M16X2X35-MM)  
13. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 6A-5591 M [8] BOLT (M12X1.75X25-MM)  
15. 142-4247 [1] CAGE-BEARING  
16. 8E-9550 [1] SPACER (61X75X9.85-MM THK)  
17. 6Y-4873 [1] LEVER  
18. 103-1713 [1] YOKE-BRAKE FLANGE  
19. 102-2516 [1] YOKE  
20. 6V-4249 M [1] BOLT (M10X1.5X50-MM)  
21. 2Y-5829 M [1] NUT (M10X1.5-THD)  
22. 3B-4507 [1] LOCKWASHER (7/16)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Transmission Oil - Change
938G Wheel Loader and IT38G Integrated Toolcarrier
Transmission Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
A New Two-Piece Transmission Filler Tube is Used {3005}
2005/11/07

Caterpillar Parts SIS Catalog IT38G :

FILLER GP-POWER TRAIN OIL
149-2958 FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
103-6098 FILLER GP-POWER TRAIN OIL
DIFFERENTIAL GP-NOSPIN
8R-9833 DIFFERENTIAL GP-NOSPIN
DIFFERENTIAL GP-NOSPIN
4E-3488 DIFFERENTIAL GP-NOSPIN
DIFFERENTIAL GP-LIMITED SLIP
144-4464 DIFFERENTIAL GP-LIMITED SLIP
DIFFERENTIAL GP
144-5417 DIFFERENTIAL GP
111-9253 DIFFERENTIAL AR-REAR
111-9252 DIFFERENTIAL AR-FRONT
FILTER & LINES GP-TRANSMISSION
139-1450 FILTER & LINES GP-TRANSMISSION
FILTER GP-OIL
122-6456 FILTER GP-OIL
GEAR GP-BEVEL & PINION
100-3810 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
167-0979 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
167-0980 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
9C-8170 GEAR GP-BEVEL & PINION
GEAR GP-OUTPUT TRANSFER
170-1857 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
170-1857 GEAR GP-OUTPUT TRANSFER

Truck sale:

Caterpillar IT38G
 
Caterpillar IT38G
- Wheel Loaders
ZIEGLER CAT
 
 
Caterpillar IT38G II, Misc Forklifts, Material handling equipment


 
30.773 
Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung


 
63.000 
Caterpillar IT38G II 3, Radlader, Bau-Und Bergbauausrüstung


Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung
 
Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.