297-4831 KIT-GASKET -WATER PUMP S/N 1CW1-UP KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES. FOR USE WITH @@@@@197-3542@@@@@ FIELD INSTALLATION IT38G

297-4831 KIT-GASKET -WATER PUMP
S/N 1CW1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.
FOR USE WITH @@@@@197-3542@@@@@
FIELD INSTALLATION

i05192105 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Part No	Qty	Parts name
4W-7592	[1]	GASKET
2M-4453	[1]	SEAL-O-RING
3D-2824	[1]	SEAL-O-RING
3K-0360	[3]	SEAL-O-RING
1J-9671	[1]	SEAL-O-RING
4J-0524	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP26430801

460-1407: KIT-GASKET

KIT-GASKET

460-1407 KIT-GASKET
S/N 1CW1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FIELD REPLACEMENT FOR @@@@@288-6377@@@@@
FOR USE WITH @@@@@197-3540@@@@@
FIELD INSTALLATION

i05917428 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Part No	Qty	Parts name
4R-9999	[1]	EXCLUDER-CRANKSHAFT SEAL
139-3526	[1]	GASKET
107-7611	[2]	PLUG
7E-0844	[1]	SEAL
245-7339	[1]	SEAL-CRANKSHAFT (FRONT)
135-9819	[1]	SEAL-INTEGRAL
1T-1068	[1]	SEAL-O-RING
6F-6673	[1]	SEAL-O-RING
061-9455	[1]	SEAL-O-RING
126-1757	[2]	WASHER (10.85X19.3X1.27-MM THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP26430802

460-1469: KIT-GASKET

KIT-GASKET

460-1469 KIT-GASKET -SINGLE CYLINDER HEAD
S/N 1CW1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINE WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE.
FIELD REPLACEMENT FOR @@@@@239-4290@@@@@
FOR USE WITH @@@@@197-3540@@@@@, @@@@@197-3542@@@@@
FIELD INSTALLATION

i05845318 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1S-7057	[1]	GASKET
2.	7C-1152	[2]	GASKET
3.	7C-1159	[1]	GASKET
4.	7C-7431	[1]	GASKET (TURBOCHARGER)
5.	7W-2398	[1]	GASKET (OIL DRAIN)
6.	113-6200	[3]	GASKET
7.	113-6250	[1]	GASKET
8.	119-2940	[1]	GASKET (VALVE COVER)
9.	205-1293	[1]	GASKET-CYLINDER HEAD
10.	2W-7212	[1]	GASKET-WATER REGULATOR
11.	195-7339	[1]	GASKET-WATER REGULATOR
12.	156-0235	[6]	LOCK
13.	3E-8017 M	[4]	LOCKNUT (M10X1.5-THD)
14.	7E-0844	[1]	SEAL
15.	1J-9671	[3]	SEAL-O-RING
16.	3D-2824	[1]	SEAL-O-RING
17.	3J-1907	[7]	SEAL-O-RING
18.	3J-7354	[3]	SEAL-O-RING
19.	3K-0360	[3]	SEAL-O-RING
20.	4J-5477	[2]	SEAL-O-RING
21.	5F-7054	[1]	SEAL-O-RING
22.	5P-7813	[1]	SEAL-O-RING
23.	6F-6673	[1]	SEAL-O-RING
24.	6V-8397	[7]	SEAL-O-RING
25.	8H-2046	[1]	SEAL-O-RING
26.	9M-4849	[1]	SEAL-O-RING
27.	418-6781 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)

			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

			HTTP://DEALER.CAT.COM/RELATED
	M		METRIC PART

#SEBP26430803

463-6136: KIT-GASKET

KIT-GASKET

463-6136 KIT-GASKET
S/N 1CW1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FOR USE WITH @@@@@197-3540@@@@@, @@@@@197-3542@@@@@
FIELD INSTALLATION

i05946352 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Part No	Qty	Parts name
4Y-9652	[3]	GASKET
7C-0358	[1]	GASKET
7W-5340	[1]	GASKET
300-7933	[1]	GASKET
261-3816	[1]	GASKET-OIL PAN (ENGINE)
2M-9780	[1]	SEAL-O-RING
3J-1907	[3]	SEAL-O-RING
3K-0360	[3]	SEAL-O-RING
3P-1156	[2]	SEAL-O-RING
4F-7391	[1]	SEAL-O-RING
4F-9653	[1]	SEAL-O-RING
6V-5063	[2]	SEAL-O-RING
214-7566	[2]	SEAL-O-RING
238-5080	[1]	SEAL-O-RING
238-5081	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP26430804

126-9524: LOCK GP-VANDALISM

LOCK GP-VANDALISM

126-9524 LOCK GP-VANDALISM
S/N 1CW1-UP
PART OF 144-5449 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i00695267 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-8502	[2]	PADLOCK GP
			(EACH INCLUDES)
	5P-8500 A	[1]	KEY
2.	7K-5636 Y	[1]	COVER GP-XMSN OIL FILLER CAP
3.	9G-9288 Y	[1]	CAP GP-PROTECTION
	A		NOT PART OF THIS GROUP
	Y		SEPARATE ILLUSTRATION

#SEBP26430805

126-9524: LOCK GP-VANDALISM

LOCK GP-VANDALISM

126-9524 LOCK GP-VANDALISM
S/N 1CW1-99999
PART OF 144-5449 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i01064991 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	246-2641 C	[2]	PADLOCK GP
			(EACH INCLUDES KEY)
2.	7K-5636 Y	[1]	COVER GP-XMSN OIL FILLER CAP
3.	9G-9288 Y	[1]	CAP GP-PROTECTION
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP26430806

130-4897: PLATE & FILM GP

PLATE & FILM GP

130-4897 PLATE & FILM GP
S/N 1CW1-99999
PART OF 154-4141 SUPPRESSION AR-SOUND
AN ATTACHMENT

i00848260 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Part No	Qty	Parts name
	[1]	PLATE-CERTIFICATION
9R-1948	[4]	RIVET
4B-4158	[4]	SCREW-DRIVE (NO 4X0.25-IN)
8T-9530	[4]	TACK (METAL)
9X-6562	[4]	TACK
9X-8937	[4]	TACK

#SEBP26430807

135-9832: PLATE & FILM GP

PLATE & FILM GP

135-9832 PLATE & FILM GP
S/N 1CW1-99999
PART OF 138-3204 CHASSIS AR

i00554605 SEBP2643

For full view, you need register

Parts for your IT38G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Part No	Qty	Parts name
5P-1175	[1]	FILM-IDENTIFICATION (ENGINE OIL FILL)
		TO CRANKCASE OIL FILLER CAP
Y	[1]	FILM GP
4P-8681	[1]	FILM-IDENTIFICATION (ENGINE OIL FILTER)
		ON OIL FILTER
148-3587	[1]	FILM-INFORMATION (TRANSMISSION OIL LEVEL)
		ON LEFT SIDE OF TMSN SIGHT GAUGE
4P-6464	[1]	FILM-INFORMATION (AIR CLEANER)
		ON AIR FILTER COVER
124-2456	[1]	FILM-INSTRUCTION (NO STEP)
		ON TOP SURFACE OF HOOD IN CENTER
153-0287	[1]	FILM-INSTRUCTION (FUEL FILTER)
		ON THE MAIN BOX RELAY
7X-3229	[4]	FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)
		ONE EACH AT REAR LIFT & TIEDOWN EYES AND
		ONE EACH AT FRONT LIFT & TIEDOWN EYES
221-2724	[2]	FILM-REFLECTOR (RED)
		ON RH & LH SIDES OF COUNTERWEIGHT
156-3849	[1]	FILM-WARNING (RADIATOR)
		NEXT TO RADIATOR FILL CAP
6V-4611	[1]	FILM-WARNING (JUMP START, READ OMM)
		ON LOWER REAR LEFT SIDE OF THE HOOD
114-4285	[2]	FILM-WARNING (MAINTENANCE, REMOVE KEY)
		ON HOOD AT THE HEIGHT OF LOCKING DEVISE OF THE SERVICE DOOR, EACH SIDE
140-2395	[1]	FILM-WARNING (QUICK COUPLER, RADIO, ETHER)
		ON BRACKET ON RH "B" POST, INSIDE CAB
136-9239	[1]	PLATE-WARNING-ROPS/FOPS
		ON LH SIDE OF CAB BELOW RECESSED GRAB HANDLES PROVIDED. USE POP RIVETS
A	[1]	PLATE-SERIAL NUMBER (ENGINE)
		ON LOWER RH SIDE OF CYLINDER BLOCK
5P-7244	[2]	PLATE-WARNING (NO CLEARANCE)
		ON SIDEFACE OF LOADER FRAME APPROX. 100 MM FORWARD OF REAR EDGE AND
		560 MM UP FROM BOTTOM, EACH SIDE. USE TACK FASTENERS.
4S-8264	[4]	RIVET-POP
8L-8413	[6]	STRAP-CABLE (WHITE)
9X-8937	[8]	TACK
A		NOT PART OF THIS GROUP
Y		SEPARATE ILLUSTRATION

Information:

SERVICE EQUIPMENT AND SUPPLIES

GASKET & SEAL KITS

Truck Engine News

The Color of Certain O-Ring Seals Is Changing {7555}
2002/12/01

The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/31

Engine News

The Color of Certain O-Ring Seals Is Changing {7555}
2003/01/01

The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/22

Special Instruction

Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}

Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}

Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}

Service Letter-NACD

6Y8285 Seals Need To Be Removed From Dealer Parts Stock
6Y8285 Seals Need To Be Removed From Dealer Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Correct Packaging Of Transmission Rotating Seals
Correct Packaging Of Transmission Rotating Seals

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Tool Operating Manual

Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}

Service Letter-China

6Y8285 Seals Need To Be Removed From Dealer Parts Stock
6Y8285 Seals Need To Be Removed From Dealer Parts Stock

Service Letter-Asia

Reuse And Salvage Guidelines

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Service Letter-APD

6Y8285 Seals Need To Be Removed From Dealer Parts Stock
6Y8285 Seals Need To Be Removed From Dealer Parts Stock

Disassembly and Assembly

Duo-Cone Conventional Seals - Install
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train

Service Magazine

Improved Caterpillar O-ring Face Seals are Now Available {7555}
2000/05/08

A New Cylinder Head Gasket Is Available For Service Replacement {1124}
2002/03/18

The Color of Certain O-Ring Seals Will Change {7555}
2002/12/09

The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
2003/07/21

Repair Guidelines for Air Compressors {1803}
2003/08/25

A New Cylinder Head Gasket is Now Used {1100, 1124}
2008/12/29

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26

The 1U-8846 Gasket Sealant Is Canceled {7555}
2011/02/02

Caterpillar Parts SIS Catalog IT38G :

126-9524 LOCK GP-VANDALISM

130-4897 PLATE & FILM GP

135-9832 PLATE & FILM GP

Truck sale:

Caterpillar IT38G
- Wheel Loaders
ZIEGLER CAT

Caterpillar IT38G II, Misc Forklifts, Material handling equipment

30.773

Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung

63.000

Caterpillar IT38G II 3, Radlader, Bau-Und Bergbauausrüstung

Caterpillar IT38G, Radlader, Bau-Und Bergbauausrüstung