MACHINE ARRANGEMENT
MACHINE ARENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
CAMSHAFT GPCARRIER GP-SEAL
CYLINDER BLOCK GP
MACHINE ARRANGEMENT
MACHINE AR#SEBP26440001
126-7783: CHASSIS AR
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 112-6950 Y | [1] | CONTROL GP-BUCKET | ||
| S/N 8JW1-429 | ||||
| 201-2427 Y | [1] | CONTROL GP-BUCKET | ||
| S/N 8JW430-UP | ||||
| 143-4873 Y | [1] | CONTROL GP-SERVICE BRAKE | ||
| 112-6954 Y | [1] | COUNTERWEIGHT GP | ||
| 112-6956 Y | [1] | CYLINDER & MTG GP-STEERING | ||
| 112-6957 Y | [1] | DOOR GP-BATTERY | ||
| S/N 8JW1-272 | ||||
| 165-4586 Y | [1] | DOOR GP-BATTERY | ||
| S/N 8JW273-UP | ||||
| 112-6958 Y | [1] | FENDER GP | ||
| 112-6308 Y | [1] | FRAME AS-LOADER | ||
| S/N 8JW1-464 | ||||
| 213-8460 Y | [1] | FRAME AS-LOADER | ||
| S/N 8JW465-UP | ||||
| 113-3293 Y | [1] | FRAME AS-REAR | ||
| S/N 8JW1-272 | ||||
| Y | [1] | FRAME AS-REAR | ||
| S/N 8JW273-UP | ||||
| 126-7693 Y | [1] | GUARD GP-FRONT | ||
| 112-6953 Y | [1] | HITCH GP-ARTICULATING | ||
| 112-6964 Y | [1] | HOOD & GUARD GP | ||
| 112-6965 Y | [1] | LADDER GP | ||
| 112-6972 Y | [1] | LINES GP-FUEL | ||
| 112-6967 Y | [1] | LINES GP-GREASE | ||
| 112-6968 Y | [1] | LINES GP-CAB HEATER | ||
| 145-4673 Y | [1] | LINES GP-HYDRAULIC OIL COOLER | ||
| 143-4874 Y | [1] | LINES GP-STEERING | ||
| 112-6971 Y | [1] | LINES GP-TORQUE CONV COOLER | ||
| 112-6973 Y | [1] | LINK GP-STEERING FRAME LOCK | ||
| 6V-1970 Y | [1] | LITERATURE GP (STANDARD CAB) | ||
| 165-4104 Y | [1] | MOUNTING GP-LUBRICATION CHART | ||
| 112-6976 Y | [1] | PLATE & FILM GP | ||
| 146-4317 Y | [1] | RADIATOR & FAN GP | ||
| 112-6959 Y | [1] | SUPPORT GP-AIR INLET | ||
| 112-6978 Y | [1] | TANK GP-FUEL | ||
| 126-7695 Y | [1] | WASHER GP-WINDOW | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26440002
126-7782: GENERAL AR
126-7782 GENERAL AR
S/N 8JW1-UP
S/N 8JW1-UP
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-7783 Y | [1] | CHASSIS AR | ||
| 148-5656 Y | [1] | ELECTRICAL AR | ||
| 116-8670 Y | [1] | ENGINE AR | ||
| Y | [1] | HYDRAULIC AR-2 VALVE | ||
| 116-8669 Y | [1] | INSTALLATION AR-ENGINE | ||
| Y | [1] | OPERATOR AR | ||
| 157-1030 Y | [1] | POWER TRAIN AR | ||
| -OR- | ||||
| Y | [1] | POWER TRAIN AR | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26440003
116-8670: ENGINE AR
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4W-3462 Y | [1] | CARRIER GP-SEAL | ||
| 7E-9912 Y | [1] | CONTROL GP-GOVERNOR | ||
| 100-6269 Y | [1] | COOLER GP-ENGINE OIL | ||
| 4P-0512 Y | [1] | COVER GP-CYLINDER BLOCK | ||
| S/N 55K2081-3412; 6JK384-5195 | ||||
| 173-1577 Y | [1] | COVER GP-CYLINDER BLOCK | ||
| S/N 6JK5196-UP | ||||
| 136-0815 Y | [1] | COVER GP-FRONT HOUSING | ||
| S/N 55K2081-3412; 6JK384-5195 | ||||
| 166-8800 Y | [1] | COVER GP-FRONT HOUSING (OIL FILLER) | ||
| S/N 6JK5196-UP | ||||
| 4W-2172 Y | [1] | COVER GP-VALVE MECHANISM | ||
| 136-3632 Y | [1] | DRAIN GP-ENGINE OIL | ||
| 4W-5428 Y | [1] | DRIVE GP-WATER PUMP | ||
| 7C-0044 Y | [1] | DRIVE GP-FAN | ||
| S/N 6JK3140-5362 | ||||
| 187-6119 Y | [1] | DRIVE GP-FAN | ||
| S/N 6JK5363-5894 | ||||
| 188-2006 Y | [1] | DRIVE GP-FAN | ||
| S/N 6JK5895-UP | ||||
| 136-5992 Y | [1] | ENGINE AR-CORE | ||
| 130-7193 Y | [1] | FILLER GP-ENGINE OIL | ||
| S/N 55K2081-3412; 6JK384-1784 | ||||
| Y | [1] | FILLER GP-ENGINE OIL | ||
| S/N 6JK1785-5195 | ||||
| 138-1827 Y | [1] | FILTER & LINES GP-SEC FUEL | ||
| S/N 55K2081-3412; 6JK384-4947 | ||||
| 171-6968 Y | [1] | LINES GP-FUEL FILTER | ||
| S/N 6JK4948-UP | ||||
| 4P-8183 Y | [1] | FILTER GP-ENGINE OIL | ||
| 7E-0519 Y | [1] | FLYWHEEL GP | ||
| 7W-8420 Y | [1] | FUMES DISPOSAL GP | ||
| S/N 55K2081-3412; 6JK384-562 | ||||
| 133-1842 Y | [1] | FUMES DISPOSAL GP | ||
| S/N 6JK563-1384 | ||||
| 143-3217 Y | [1] | FUMES DISPOSAL GP | ||
| S/N 6JK1385-6035 | ||||
| 190-0108 Y | [1] | FUMES DISPOSAL GP | ||
| S/N 6JK6036-UP | ||||
| 130-7185 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
| 134-2356 Y | [1] | STARTING AID GP (AIR INLET HEATER) | ||
| 4W-1103 Y | [1] | HOUSING GP-FLYWHEEL | ||
| 101-4539 Y | [1] | HOUSING GP-FRONT | ||
| 4W-2515 Y | [1] | LIFTING GP-ENGINE | ||
| S/N 55K2081-3412; 6JK384-3747 | ||||
| 117-3476 Y | [1] | LIFTING GP-ENGINE | ||
| S/N 6JK3748-UP | ||||
| 136-0589 Y | [1] | LINES GP-AIR | ||
| 7C-2475 Y | [1] | LINES GP-ENGINE OIL | ||
| 4P-7703 Y | [1] | LINES GP-TURBOCHARGER OIL | ||
| 132-5235 Y | [1] | LINES GP-WATER | ||
| 7W-9248 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 115-5340 Y | [1] | PAN GP-OIL | ||
| 156-0228 Y | [1] | PLUG GP-CYLINDER BLOCK | ||
| S/N 6JK1603-UP | ||||
| 4W-5429 Y | [1] | PULLEY GP-CRANKSHAFT | ||
| 9Y-0758 Y | [1] | PULLEY GP-FAN DRIVE | ||
| 143-5608 Y | [1] | PUMP GP-WATER | ||
| S/N 55K2081-3412; 6JK384-3747 | ||||
| 123-8388 Y | [1] | PUMP GP-WATER | ||
| S/N 6JK3748-UP | ||||
| 7C-1770 Y | [1] | SEAL GP-FLYWHEEL HOUSING | ||
| 7C-4028 Y | [1] | SOLENOID GP-SHUTOFF (FUEL) | ||
| 2T-2951 Y | [1] | VALVE GP-FLUID SAMPLING | ||
| AVAILABLE GASKET KIT(S): | ||||
| 159-6065 | KIT-GASKET (CENTRAL, LOWER STRUCTURE) | |||
| 7X-2523 | KIT-GASKET (FRONT STRUCTURE) | |||
| 162-4012 | KIT-GASKET (FUEL SYSTEM) | |||
| 155-9805 | KIT-GASKET (REAR STRUCTURE) | |||
| 154-5092 | KIT-GASKET (SINGLE CYLINDER HEAD) | |||
| 142-2220 | KIT-GASKET (TURBOCHARGER) | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26440004
136-5992: ENGINE AR-CORE
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 136-0596 Y | [1] | AFTERCOOLER GP-WATER | ||
| 139-3527 Y | [1] | BREATHER GP (CRANKCASE) | ||
| 100-4966 Y | [1] | CAMSHAFT GP | ||
| 105-1695 Y | [1] | CONTROL GP-FUEL INJECTION | ||
| 113-6087 Y | [1] | CRANKSHAFT GP | ||
| 141-8283 Y | [1] | CYLINDER BLOCK GP | ||
| S/N 55K2081-2849; 6JK384-1602 | ||||
| 129-1165 Y | [1] | CYLINDER BLOCK GP | ||
| S/N 55K2850-3412; 6JK1603-UP | ||||
| 129-1150 Y | [1] | CYLINDER HEAD GP | ||
| S/N 6JK384-3330 | ||||
| 140-7370 Y | [1] | CYLINDER HEAD GP | ||
| S/N 6JK3331-UP | ||||
| 117-8272 Y | [1] | DAMPER & PULLEY GP | ||
| S/N 55K2081-2122; 6JK384-888 | ||||
| 117-8276 Y | [1] | DAMPER & PULLEY GP | ||
| S/N 55K2123-3412; 6JK889-3139 | ||||
| 115-5339 Y | [1] | DAMPER & PULLEY GP | ||
| S/N 6JK3140-UP | ||||
| 101-4540 Y | [1] | GEAR GP-FRONT | ||
| 119-2895 Y | [1] | GOVERNOR GP-UNIT INJECTOR | ||
| S/N 55K2081-3412; 6JK384-2709 | ||||
| 164-5470 Y | [1] | GOVERNOR GP-UNIT INJECTOR | ||
| S/N 6JK2710-UP | ||||
| 107-7731 Y | [1] | LINES GP-FUEL RATIO CONTROL | ||
| 143-2936 Y | [1] | MANIFOLD GP-INLET | ||
| S/N 55K2081-2094; 6JK384-791 | ||||
| Y | [1] | MANIFOLD GP-INLET | ||
| S/N 55K2095-2503; 6JK792-888 | ||||
| Y | [1] | MANIFOLD GP-INLET | ||
| S/N 55K2504-3412; 6JK889-UP | ||||
| 4P-4372 Y | [1] | MECHANISM GP-FUEL PUMP & VALVE | ||
| 147-9592 Y | [6] | PISTON & ROD GP | ||
| 4W-2195 Y | [1] | PUMP GP-ENGINE OIL | ||
| Y | [6] | PUMP GP-FUEL INJECTION | ||
| S/N 55K2081-2183; 6JK384-791 | ||||
| 107-7734 Y | [6] | PUMP GP-FUEL INJECTION | ||
| S/N 55K2184-3412; 6JK792-UP | ||||
| 115-4210 Y | [1] | SEAL GP-CRANKSHAFT | ||
| 119-2932 Y | [1] | TURBOCHARGER GP | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26440005
116-8669: INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 116-8664 Y | [1] | AIR CLEANER GP | ||
| 116-8662 Y | [1] | ALTERNATOR GP-CHARGING | ||
| S/N 8JW1-262 | ||||
| 162-9490 Y | [1] | ALTERNATOR GP-CHARGING | ||
| S/N 8JW263-UP | ||||
| -OR- | ||||
| 222-4389 Y | [1] | ALTERNATOR GP-CHARGING | ||
| 116-8667 Y | [1] | LINES GP-AIR | ||
| 168-8976 Y | [1] | LINES GP-ENGINE OIL DRAIN | ||
| S/N 8JW263-UP | ||||
| 116-8666 Y | [1] | MOUNTING GP-ENGINE & XMSN | ||
| 116-8661 Y | [1] | MUFFLER GP | ||
| 152-6843 Y | [1] | EXTENSION GP-EXHAUST | ||
| 165-8096 Y | [1] | PULLEY GP-FAN & ALT DRIVE | ||
| S/N 8JW263-UP | ||||
| 126-7692 Y | [1] | PUMP & MTG GP-HYDRAULIC FAN | ||
| 151-6342 Y | [1] | PUMP GP-FUEL PRIMING | ||
| S/N 8JW1-264 | ||||
| 151-6351 Y | [1] | PUMP GP-FUEL PRM & PRIM FILTER | ||
| S/N 8JW265-UP | ||||
| 111-4275 Y | [1] | STARTING MOTOR GP-ELECTRIC (COLD WEATHER) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26440006
100-4966: CAMSHAFT GP
For full view, you need register
#SEBP26440007
4W-3462: CARRIER GP-SEAL
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS#SEBP26440008
173-1577: COVER GP-CYLINDER BLOCK
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 342-4977 | [3] | COVER-SIDE | |
| 2. | 4Y-9652 | [3] | GASKET | |
| 3. | 6V-2317 M | [24] | BOLT (M8X1.25X30-MM) | |
| 4. | 9M-1974 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 110-7618 | [4] | BOLT AS | |
| (EACH INCLUDES) | ||||
| 6V-5215 M | [1] | BOLT (M8X1.25X16-MM) | ||
| 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 6. | 2W-6544 | [1] | COVER | |
| 7. | 517-0553 | [1] | GASKET | |
| 8. | 7W-3872 | [6] | SLEEVE | |
| 9. | 9S-4191 | [3] | PLUG (9/16-18-THD) | |
| 10. | 3J-1907 | [3] | SEAL-O-RING | |
| 11. | 9Y-0747 | [1] | MANIFOLD-OIL | |
| 12. | 4F-9653 | [1] | SEAL-O-RING | |
| 13. | 6V-5842 M | [2] | BOLT (M10X1.5X40-MM) | |
| 14. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
#SEBP26440009
4P-0512: COVER GP-CYLINDER BLOCK
4P-0512 COVER GP-CYLINDER BLOCK
S/N 55K2081-3412; 6JK384-5195
PART OF 116-8670 ENGINE AR
S/N 55K2081-3412; 6JK384-5195
PART OF 116-8670 ENGINE AR
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-2317 M | [23] | BOLT (M8X1.25X30-MM) | |
| 2. | 9M-1974 | [19] | WASHER-HARD (8.8X16X2-MM THK) | |
| 3. | 7W-3872 | [6] | SLEEVE (LOCATIONS MARKED X) | |
| 4. | 277-4421 | [2] | COVER-SIDE | |
| 5. | 4Y-9652 | [3] | GASKET | |
| 6. | 7W-9395 | [1] | COVER-SIDE | |
| 8. | 2W-6544 | [1] | COVER | |
| 9. | 9S-4191 | [3] | PLUG (9/16-18-THD) | |
| 10. | 3J-1907 | [3] | SEAL-O-RING | |
| 11. | 4F-9653 | [1] | SEAL-O-RING | |
| 12. | 9Y-0747 | [1] | MANIFOLD-OIL | |
| 13. | 6V-5842 M | [2] | BOLT (M10X1.5X40-MM) | |
| 14. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 15. | 110-7618 | [4] | BOLT AS | |
| (EACH INCLUDES) | ||||
| 6V-5215 M | [1] | BOLT (M8X1.25X16-MM) | ||
| 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 16. | 175-1367 | [4] | SPACER (8.8X16X10-MM THK) | |
| 17. | 134-4640 | [1] | SPACER (9X15X15-MM THK) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
