AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

227-0163 GEAR GP-OUTPUT TRANSFER S/N 8JW1-UP PART OF 186-2524 TRANSMISSION AR 950G WHEEL LOADER


POWER TRAIN
GEAR GP
AXLE GP
KIT
COOLER GP

WHEEL LOADER 950G WHEEL LOADER 8JW
 950G Wheel Loader 8JW00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2644 950G 8JW   (1998)

POWER TRAIN

GEAR GP
GEAR GP-OUTPUT TRANSFER
114-8947 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
157-0955 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
227-0163 GEAR GP-OUTPUT TRANSFER
 

#SEBP26440290
 

227-0163: GEAR GP-OUTPUT TRANSFER

227-0163 GEAR GP-OUTPUT TRANSFER
S/N 8JW1-UP
PART OF 186-2524 TRANSMISSION AR
i04505489 SEBP2644
2270163 GEAR GP-OUTPUT TRANSFER Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-5052 [1] CASE-TRANSFER  
2. 188-5046 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
3. 6V-4248 M [27] BOLT (M10X1.5X25-MM)  
4. 4S-8603 [1] SCREEN GP-MAGNETIC  
5. 6V-1720 [1] PLATE-SERIAL NUMBER (TRANSMISSION)  
6. 8P-3251 [1] COVER AS  
7. 7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
8. 7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
  8P-1722 [1] COVER  
9. 7S-8554 [1] SEAL-O-RING  
10. 125-3375 [1] GEAR-TRANSFER (68-TEETH)  
11. 5P-0891 [2] CONE-BEARING  
12. 5P-0890 [2] CUP-BEARING  
13. 265-9465 [1] SHAFT-OUTPUT  
14. 2P-8987 [2] CONE-BEARING  
15. 2P-8986 [2] CUP-BEARING  
16. 223-3925 [1] CAGE-BEARING  
17. 5F-3144 [1] SEAL-O-RING  
18. 8T-0358 M [2] BOLT (M16X2X90-MM)  
19. 138-1509 C [1] DRAIN GP-ECOLOGY (POWER TRAIN OIL)  
19A. 7M-8485 [1] SEAL-O-RING  
19B. 8F-0212 [1] SEAL-O-RING  
  138-1510 [1] PLUG  
23. 9G-6257 [2] GASKET-COVER  
24. 6V-6317 M [12] BOLT (M10X1.5X20-MM)  
25. 3J-0634 [1] SEAL-O-RING  
26. 223-3924 [1] CAGE-BEARING  
27. 6I-8497 B [1] SHIM PACK (INCLUDES 12-SHIMS)  
28. 193-2200 [2] SEAL-LIP TYPE  
29. 115-1326 [1] YOKE AS  
30. 7S-8158 [1] GUARD  
31. 2H-3088 [2] SEAL-O-RING  
32. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
33. 188-5149 [1] CAGE AS-BEARING  
34. 3E-4319 M [4] STUD-TAPERLOCK (M12X1.75X55-MM)  
35. 2N-7006 [1] COVER  
36. 2N-7007 B [1] GASKET  
37. 6V-8149 M [4] NUT (M12X1.75-THD)  
38. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT NO.1)  
38A. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION OUTPUT NO.2)  
39. 200-1315 Y [1] BRAKE GP-PARKING  
41. 103-1712 [1] DRUM  
42. 7X-0622 [8] WASHER (13X24X2.5-MM THK)  
43. 6A-5591 M [8] BOLT (M12X1.75X25-MM)  
44. 129-6329 [1] LEVER  
45. 191-1830 [1] YOKE  
46. 6V-3822 M [1] BOLT (M10X1.5X35-MM)  
47. 115-4783 [1] TUBE AS  
48. 2H-3927 [1] SEAL-O-RING  
49. 1H-9696 [1] SEAL-O-RING  
50. 110-7453 [1] TUBE AS  
51. 3H-2652 [1] SEAL-O-RING  
52. 9C-4937 [1] BREATHER AS (PRESSURE RELIEF)  
53. 6V-8197 M [1] BOLT (M12X1.75X40-MM)  
54. 6V-5696 M [1] BOLT (M12X1.75X80-MM)  
55. 6V-1820 CM [10] BOLT (M10X1.5X30-MM)  
57. 1H-8720 [1] SEAL-O-RING  
58. 6T-7061 [1] EYE-LIFTING  
59. 4S-8598 [1] SCREEN-SUCTION  
60. 8H-7521 [1] SEAL-O-RING  
61. 8T-0375 M [1] BOLT (M16X2X45-MM)  
63. 125-3376 [1] GEAR-TRANSFER (74-TEETH)  
64. 9G-6258 [2] COVER-TRANSMISSION  
65. 265-3930 [2] RETAINER  
66. 3J-1907 [1] SEAL-O-RING  
67. 6V-0852 [1] CAP-DUST  
68. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
69. 9H-1024 [4] WASHER-HARD (17X30X6-MM THK)  
70. 6V-5686 M [4] BOLT (M16X2X50-MM)  
71. 9X-8268 [2] WASHER (17.5X30X3.5-MM THK)  
72. 1V-6341 [2] SEAL  
73. 3E-4353 [10] WASHER-HARD (11X25X3-MM THK)  
74. 5P-2756 [1] PLUG-SEAL  
75. 4F-0186 [1] NIPPLE-PIPE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26440291
 

112-0769: HOUSING GP-FIXED AXLE

112-0769 HOUSING GP-FIXED AXLE
S/N 8JW1-UP
PART OF 112-0768, 126-7843, 157-0336, 157-0337, 157-0338, 157-0339 AXLE AR-FIXED
i00799274 SEBP2644
1120769 HOUSING GP-FIXED AXLE Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-5315 [2] SEAL GP-DUO-CONE  
2. 6Y-2538 [2] CONE-BEARING  
3. 2P-1373 [2] CUP-BEARING  
4. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
5. 5H-3701 [2] SCREW-PURGE  
6. 143-4907 [1] HOUSING AS-FIXED  
  095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
7. 1U-8846 B SEALANT-GASKET  
8. 9C-8421 [2] SHAFT-AXLE  
9. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
10. 9X-2027 [6] WASHER (11X18X2-MM THK)  
11. 6V-5686 M [10] BOLT (M16X2X50-MM)  
12. 5P-8247 [58] WASHER-HARD (17X32X3.5-MM THK)  
13. 8T-0336 [1] FITTING-PRESSURE RELIEF  
14. 4H-6520 [1] SEAL-O-RING  
15. 9C-6021 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
16. 9C-9193 [1] HOUSING-PINION  
17. 4E-8534 [1] RETAINER-SEAL  
18. 123-4003 [1] SEAL-LIP TYPE  
19. 9C-6041 [3] DOWEL  
20. 8T-5002 M [24] BOLT (M16X2X180-MM)  
21. 127-5092 [2] HOUSING-AXLE  
22. 5P-4484 [1] PLUG-MAGNETIC  
23. 3B-0551 [1] PLUG-PIPE  
24. 8T-0649 M [24] BOLT (M16X2X110-MM)  
25. 7M-8485 [3] SEAL-O-RING  
26. 9S-4181 [2] PLUG (1-5/16-12-THD)  
27. 5P-3119 [2] RING-RETAINING  
28. 9C-8419 [2] NUT-BEARING  
29. 8B-6342 [2] CONE-BEARING  
30. 8B-6343 [2] CUP-BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP26440292
 

112-0769: HOUSING GP-FIXED AXLE

112-0769 HOUSING GP-FIXED AXLE
S/N 8JW273-UP
PART OF 126-7843, 157-0337 AXLE AR-FIXED
i01839632 SEBP2644
1120769 HOUSING GP-FIXED AXLE Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-5315 [2] SEAL GP-DUO-CONE  
2. 6Y-2538 [2] CONE-BEARING  
3. 2P-1373 [2] CUP-BEARING  
4. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
5. 5H-3701 [2] SCREW-PURGE  
6. 192-9121 C [1] HOUSING AS  
  095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
7. 8C-8422 B SEALANT  
8. 9C-8421 [2] SHAFT-AXLE  
9. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
10. 9X-2027 [6] WASHER (11X18X2-MM THK)  
11. 6V-5686 M [10] BOLT (M16X2X50-MM)  
12. 5P-8247 [58] WASHER-HARD (17X32X3.5-MM THK)  
13. 8T-0336 [1] FITTING-PRESSURE RELIEF  
14. 4H-6520 [1] SEAL-O-RING  
15. 9C-6021 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
16. 9C-9193 [1] HOUSING-PINION  
17. 4E-8534 [1] RETAINER-SEAL  
18. 123-4003 [1] SEAL-LIP TYPE  
19. 9C-6041 [3] DOWEL  
20. 8T-5002 M [24] BOLT (M16X2X180-MM)  
21. 127-5092 [2] HOUSING-AXLE  
22. 5P-4484 [1] PLUG-MAGNETIC  
23. 3B-0551 [1] PLUG-PIPE  
24. 8T-0649 M [24] BOLT (M16X2X110-MM)  
25. 7M-8485 C [4] SEAL-O-RING  
26. 9S-4181 [2] PLUG (1-5/16-12-THD)  
27. 5P-3119 [2] RING-RETAINING  
28. 9C-8419 [2] NUT-BEARING  
29. 8B-6342 [2] CONE-BEARING  
30. 8B-6343 [2] CUP-BEARING  
31. 9S-9334 C [1] PLUG  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP26440293
 

214-6156: HOUSING GP-FIXED AXLE

214-6156 HOUSING GP-FIXED AXLE
S/N 8JW1-UP
PART OF 214-9397, 214-9398 AXLE AR-FIXED
i01641535 SEBP2644
2146156 HOUSING GP-FIXED AXLE Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-8534 [1] RETAINER-SEAL  
2. 5H-3701 [2] SCREW-PURGE  
3. 8T-0336 [1] FITTING-PRESSURE RELIEF  
4. 226-2684 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
5. 9C-8421 [2] SHAFT-AXLE  
6. 9C-9194 [1] HOUSING-PINION  
7. 9G-5315 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  2M-0344 [2] RING-SEALING  
10. 123-4003 [1] SEAL-LIP TYPE  
11. 192-9121 [1] HOUSING AS  
  095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
12. 372-0715 [2] HOUSING-AXLE  
13. 2P-1373 [2] CUP-BEARING  
14. 3B-0551 [1] PLUG-PIPE  
15. 4H-6520 [1] SEAL-O-RING  
16. 5P-3119 [2] RING-RETAINING  
17. 5P-4484 [1] PLUG-MAGNETIC  
18. 5P-8247 [58] WASHER-HARD (17X32X3.5-MM THK)  
19. 6V-5686 M [10] BOLT (M16X2X50-MM)  
20. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
21. 6Y-2538 [2] CONE-BEARING  
22. 7M-8485 [4] SEAL-O-RING  
23. 8B-6342 [2] CONE-BEARING  
24. 8B-6343 [2] CUP-BEARING  
25. 8T-0649 M [24] BOLT (M16X2X110-MM)  
26. 8T-5002 M [24] BOLT (M16X2X180-MM)  
27. 9C-6041 [3] DOWEL  
28. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (AXLE)  
29. 9C-8419 [2] NUT-BEARING  
30. 9S-4181 [2] PLUG (1-5/16-12-THD)  
31. 9S-9334 [1] PLUG  
32. 9X-2027 [6] WASHER (11X18X2-MM THK)  
33. 1U-8846 B SEALANT-GASKET (62-ML)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP26440294
 

112-0724: HOUSING GP-OSCILLATING AXLE

112-0724 HOUSING GP-OSCILLATING AXLE
S/N 8JW1-262
PART OF 112-0723, 126-7845, 126-7846 AXLE AR-OSCILLATING
i00799321 SEBP2644
1120724 HOUSING GP-OSCILLATING AXLE Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9C-6041 [3] DOWEL  
2. 5H-3701 [2] SCREW-PURGE  
3. 8T-0336 [1] FITTING-PRESSURE RELIEF  
4. 9S-4181 [2] PLUG (1-5/16-12-THD)  
5. 7M-8485 [3] SEAL-O-RING  
6. 5P-4484 [1] PLUG-MAGNETIC  
7. 112-0764 [1] SUPPORT-TRUNNION  
8. 5P-8247 [78] WASHER-HARD (17X32X3.5-MM THK)  
9. 6V-5686 M [30] BOLT (M16X2X50-MM)  
10. 112-0765 [1] SUPPORT-TRUNNION  
11. 4V-5099 [1] COVER  
12. 9C-8421 [2] SHAFT-AXLE  
13. 9W-6671 [2] SEAL GP-DUO-CONE  
14. 6Y-2538 [2] CONE-BEARING  
15. 2P-1373 [2] CUP-BEARING  
16. 8B-6342 [2] CONE-BEARING  
17. 8B-6343 [2] CUP-BEARING  
18. 127-5091 [2] HOUSING-AXLE  
19. 1U-8846 B SEALANT-GASKET  
20. 4H-6520 [1] SEAL-O-RING  
21. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
22. 9X-2027 [6] WASHER (11X18X2-MM THK)  
23. 4E-8534 [1] RETAINER-SEAL  
24. 9C-9194 [1] HOUSING-PINION  
25. 9C-6021 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
26. 5P-3119 [2] RING-RETAINING  
27. 9C-8419 [2] NUT-BEARING  
28. 3B-0551 [1] PLUG-PIPE  
29. 8T-0649 M [24] BOLT (M16X2X110-MM)  
30. 9C-9191 [1] TRUNNION  
31. 2K-0715 [2] WASHER-THRUST (5.03X6.71X0.250-IN THK)  
32. 109-4731 [1] PLATE  
33. 6V-3531 M [4] BOLT (M20X2.5X50-MM)  
34. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
35. 2K-0713 [1] BUSHING  
36. 143-4902 [1] HOUSING AS-OSCILLATING  
  095-0673 M [4] BOLT-SOCKET HEAD (M12X1.75X60-MM)  
37. 8T-5002 M [24] BOLT (M16X2X180-MM)  
38. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
39. 123-4003 [1] SEAL-LIP TYPE  
40. 3K-0159 [1] RING-RETAINING  
41. 3K-0109 [1] BUSHING  
42. 3K-0158 [2] SEAL-LIP TYPE  
43. 6K-2430 [1] SEAL-LIP TYPE  
44. 9S-8005 [1] PLUG (3/4-16-THD)  
45. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP26440295
 

112-0724: HOUSING GP-OSCILLATING AXLE

112-0724 HOUSING GP-OSCILLATING AXLE
S/N 8JW263-UP
PART OF 112-0723, 126-7845, 138-3121, 138-3126, 138-3128 AXLE AR-OSCILLATING
i01067038 SEBP2644
1120724 HOUSING GP-OSCILLATING AXLE Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9C-6041 [3] DOWEL  
2. 5H-3701 [2] SCREW-PURGE  
3. 8T-0336 [1] FITTING-PRESSURE RELIEF  
4. 9S-4181 [2] PLUG (1-5/16-12-THD)  
5. 7M-8485 C [4] SEAL-O-RING  
6. 5P-4484 [1] PLUG-MAGNETIC  
7. 112-0764 [1] SUPPORT-TRUNNION  
8. 5P-8247 [78] WASHER-HARD (17X32X3.5-MM THK)  
9. 6V-5686 M [30] BOLT (M16X2X50-MM)  
10. 112-0765 [1] SUPPORT-TRUNNION  
11. 4V-5099 [1] COVER  
12. 9C-8421 [2] SHAFT-AXLE  
13. 9G-5315 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  2M-0344 [2] RING-SEALING  
14. 6Y-2538 [2] CONE-BEARING  
15. 2P-1373 [2] CUP-BEARING  
16. 8B-6342 [2] CONE-BEARING  
17. 8B-6343 [2] CUP-BEARING  
18. 372-0716 [2] HOUSING-AXLE  
19. 1U-8846 B SEALANT-GASKET  
20. 4H-6520 [1] SEAL-O-RING  
21. 6V-7732 M [6] BOLT (M10X1.5X25-MM)  
22. 9X-2027 [6] WASHER (11X18X2-MM THK)  
23. 4E-8534 [1] RETAINER-SEAL  
24. 9C-9194 [1] HOUSING-PINION  
25. 226-2684 B [1] SHIM PACK (INCLUDES 11-SHIMS)  
26. 5P-3119 [2] RING-RETAINING  
27. 9C-8419 [2] NUT-BEARING  
28. 3B-0551 [1] PLUG-PIPE  
29. 8T-0649 M [24] BOLT (M16X2X110-MM)  
30. 9C-9191 [1] TRUNNION  
31. 2K-0715 [2] WASHER-THRUST (5.03X6.71X0.250-IN THK)  
32. 109-4731 [1] PLATE  
33. 6V-3531 M [4] BOLT (M20X2.5X50-MM)  
34. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
35. 213-1370 C [1] BUSHING  
36. 192-9128 C [1] HOUSING AS-OSCILLATING  
37. 8T-5002 M [24] BOLT (M16X2X180-MM)  
38. 9C-6327 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (AXLE)  
39. 123-4003 [1] SEAL-LIP TYPE  
40. 3K-0159 [1] RING-RETAINING  
41. 213-1365 C [1] BUSHING  
42. 3K-0158 [2] SEAL-LIP TYPE  
43. 6K-2430 [1] SEAL-LIP TYPE  
44. 9S-9334 C [1] PLUG  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP26440296
 

261-5714: KIT-FINAL DRIVE BEARING

261-5714 KIT-FINAL DRIVE BEARING -FINAL DRIVE
S/N 8JW1-UP
KIT CONTAINS ANTI-FRICTION BEARINGS, SLEEVE BEARING/BUSHINGS, THRUST WASHERS/THRUST DISCS. ROLL PINS/SPRING PINS, NUT-STAKE, BEARING CAGE LOCKS, BENDABLE LOCKS, BRAKE WEAR INDICATOR DOWEL, BRAKE PISTON SEALS. PLUG, BEARING LOCATOR DOWELS AND DOWEL HOLE CAPS.. BEARING CAGE RETAINING PIN, DUO-CONE SEAL GROUP, SEALS, GASKETS, LIP SEALS, AND THRUST WASHER. RETAINING SCREWS.
FOR USE WITH @@@@@112-0768@@@@@, @@@@@112-0723@@@@@, @@@@@157-0336@@@@@, @@@@@138-3121@@@@@, @@@@@157-0337@@@@@
i06008069 SEBP2644
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9C-7727 [6] BUSHING  
  1J-4757 [1] CONE-BEARING  
  2D-9455 [1] CONE-BEARING  
  6Y-2538 [2] CONE-BEARING  
  6Y-2539 [1] CONE-BEARING  
  8B-6342 [2] CONE-BEARING  
  030-0061 [1] CONE-BEARING  
  1J-2860 [1] CUP-BEARING  
  2D-9454 [1] CUP-BEARING  
  2P-1373 [2] CUP-BEARING  
  6Y-2540 [1] CUP-BEARING  
  8B-6343 [2] CUP-BEARING  
  030-0060 [1] CUP-BEARING  
  117-1801 [2] DOWEL  
  4E-3897 [2] LOCK  
  9C-8287 M [1] LOCKNUT-STAKE (M70X1.5-THD)  
  4E-4031 [2] PIN  
  8T-2925 [6] PIN-SPRING  
  9X-2619 [4] PIN-SPRING  
  9X-2620 [4] PIN-SPRING  
  138-1645 [6] PIN-SPRING  
  112-0759 [2] PLUG  
  325-3781 [2] RING-BACKUP  
  8R-9207 [2] SEAL  
  325-3780 [2] SEAL  
  9G-5315 [2] SEAL GP-DUO-CONE  
  123-4003 [1] SEAL-LIP TYPE  
  2H-3088 [1] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
  4H-6520 [1] SEAL-O-RING  
  7M-8485 [3] SEAL-O-RING  
  150-4651 [2] SEAL-O-RING  
  293-3609 [6] SPRING  
  9C-9537 [12] WASHER-THRUST  
  M   METRIC PART
 

#SEBP26440297
 

191-9329: KIT-TRANSMISSION BEARING

191-9329 KIT-TRANSMISSION BEARING -TRANSMISSION
S/N 8JW1-UP
CONTAINS ANTI-FRICTION BEARINGS, SLEEVE BEARINGS/BUSHINGS, METAL SEAL RINGS. THRUST WASHERS/THRUST DISCS, ROLL PINS/SPRING PINS, BEARING LOCATOR DOWELS AND DOWEL HOLE CAPS.
FOR USE WITH @@@@@157-0953@@@@@, @@@@@176-0056@@@@@
i06007854 SEBP2644
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7B-7515 [1] BALL BEARING  
  379-2185 [2] BALL BEARING  
  129-2380 [1] BALL BEARING  
  1S-3743 [1] BALL BEARING  
  1T-0043 [1] BALL BEARING  
  8E-5247 [1] BALL BEARING  
  5P-3131 [3] BEARING AS-ROLLER  
  5P-3930 [8] BEARING AS-ROLLER  
  7S-4534 [8] BEARING-CAGED  
  143-4642 [1] BEARING-SPECIAL  
  3T-2094 [4] BUSHING  
  9G-7683 [2] BUSHING  
  2P-8987 [2] CONE-BEARING  
  155-6648 [2] CONE-BEARING  
  2P-8986 [2] CUP-BEARING  
  155-6647 [2] CUP-BEARING  
  8E-8297 [6] DISC-THRUST  
  8E-8299 [32] DISC-THRUST  
  9W-0519 [1] DISC-THRUST  
  4S-8537 [1] DOWEL  
  4S-8541 [2] DOWEL  
  8S-3426 [1] DOWEL  
  3S-8109 [16] PIN-SPRING  
  4H-4737 [4] PIN-SPRING  
  3K-1432 [2] RING-METAL SEAL  
  8P-8950 [2] RING-METAL SEAL  
  9M-1503 [1] RING-METAL SEAL  
  6Y-8030 [1] RING-SEAL  
  8P-9723 [1] RING-SEAL  
  1T-1621 [1] RING-SEAL  
  1T-1622 [1] RING-SEAL  
  3P-7019 [2] SEAL-METAL  
 

#SEBP26440298
 

151-6297: LINES GP-AXLE OIL COOLER

151-6297 LINES GP-AXLE OIL COOLER
S/N 8JW1-UP
PART OF 151-6291 COOLER & MTG AR-AXLE OIL
Type 1
i00857423 SEBP2644
1516297 LINES GP-AXLE OIL COOLER Parts scheme 1516297 LINES GP-AXLE OIL COOLER Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-3673 [1] TUBE AS  
2. 4E-3676 [1] TUBE AS  
3. 6W-5458 [1] SPACER (0.406X0.75X0.5-IN THK)  
4. 7K-1181 [1] STRAP-CABLE  
5. 7Y-5238 M [2] U-BOLT (M10X1.5-THD)  
6. 8C-6875 [4] CONNECTOR  
7. 8J-0426 [4] PLUG  
8. 8W-5084 I [1] HOSE AS  
9. 9R-4764 [1] ROD  
11. 114-9224 [1] SPACER (11.13X19.05X47-MM THK)  
12. 118-6878 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 119-4167 [1] ROD  
14. 121-3284 I [2] HOSE AS  
15. 127-9323 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
16. 130-9505 [2] FILTER-MAGNETIC (AXLE OIL COOLER)  
17. 133-6299 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
18. 137-4679 I [1] HOSE AS  
19. 151-4506 [1] TUBE AS  
20. 151-4507 [1] TUBE AS  
21. 151-4508 I [1] HOSE AS  
22. 151-4510 I [1] HOSE AS  
23. 153-2814 I [1] HOSE AS  
24. 153-2815 I [1] HOSE AS  
25. 153-3495 [1] BRACKET AS  
26. 153-5100 [2] MANIFOLD AS  
27. 155-5509 [1] BRACKET AS  
28. 155-5510 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
29. 2M-9780 [2] SEAL-O-RING  
30. 3D-2824 [2] SEAL-O-RING  
31. 3J-1907 [4] SEAL-O-RING  
32. 3K-0360 [2] SEAL-O-RING  
33. 4S-1962 [4] CLIP (LOOP)  
34. 5K-9090 [8] SEAL-O-RING  
35. 5P-7468 [3] CLIP (SLOT)  
36. 5P-7469 [3] CLIP (TAB)  
37. 5P-8444 [3] GROMMET (37-MM ID)  
38. 6V-1889 [13] CLIP (LOOP)  
39. 6V-8397 [4] SEAL-O-RING  
40. 6V-8398 [6] SEAL-O-RING  
41. 6V-8635 [2] CONNECTOR  
42. 6V-8640 [2] CONNECTOR  
43. 6V-8714 [2] CONNECTOR  
44. 6V-8724 [4] ELBOW  
45. 6V-8789 [2] TEE  
46. 6V-9746 [8] SEAL-O-RING  
47. 7D-4092 [6] CLIP  
48. 7M-8485 [10] SEAL-O-RING  
49. 7X-0752 M [1] BOSS-WELD (M10X1.5X65-MM)  
50. 8C-8762 [2] ELBOW  
51. 8T-4121 [28] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4133 M [12] NUT (M10X1.5-THD)  
53. 8T-4136 M [13] BOLT (M10X1.5X25-MM)  
54. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
55. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
56. 9S-4181 [2] PLUG (1-5/16-12-THD)  
57. 9S-4185 [2] PLUG (3/4-16-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26440299
 

151-6297: LINES GP-AXLE OIL COOLER

151-6297 LINES GP-AXLE OIL COOLER
S/N 8JW1-UP
PART OF 151-6291 COOLER & MTG AR-AXLE OIL
Type 2
i01071620 SEBP2644
1516297 LINES GP-AXLE OIL COOLER Parts scheme 1516297 LINES GP-AXLE OIL COOLER Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-3673 [1] TUBE AS  
2. 4E-3676 [1] TUBE AS  
3. 6W-5458 [1] SPACER (0.406X0.75X0.5-IN THK)  
4. 7K-1181 C [11] STRAP-CABLE  
5. 162-8352 C [2] U-BOLT  
6. 8C-6875 [4] CONNECTOR  
7. 8J-0426 [4] PLUG  
8. 8W-5084 I [1] HOSE AS  
9. 9R-4764 [1] ROD  
10. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 114-9224 [1] SPACER (11.13X19.05X47-MM THK)  
12. 142-1657 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 119-4167 [1] ROD  
14. 161-1742 CI [2] HOSE AS  
15. 127-9323 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
16. 130-9505 [2] FILTER-MAGNETIC (AXLE OIL COOLER)  
17. 133-6299 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
18. 137-4679 I [1] HOSE AS  
19. 151-4506 [1] TUBE AS  
20. 151-4507 [1] TUBE AS  
21. 151-4508 I [1] HOSE AS  
22. 151-4510 I [1] HOSE AS  
23. 153-2814 I [1] HOSE AS  
24. 153-2815 I [1] HOSE AS  
25. 153-3495 [1] BRACKET AS  
26. 153-5100 [2] MANIFOLD AS  
27. 155-5509 [1] BRACKET AS  
28. 155-5510 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
29. 2M-9780 [2] SEAL-O-RING  
30. 3D-2824 [2] SEAL-O-RING  
31. 3J-1907 [4] SEAL-O-RING  
32. 3K-0360 [3] SEAL-O-RING  
33. 4S-1962 C [2] CLIP (LOOP)  
34. 5K-9090 [8] SEAL-O-RING  
35. 5P-7468 [3] CLIP (SLOT)  
36. 5P-7469 [3] CLIP (TAB)  
37. 5P-8444 [3] GROMMET (37-MM ID)  
38. 6V-1889 C [9] CLIP (LOOP)  
39. 6V-8397 [4] SEAL-O-RING  
40. 6V-8398 [6] SEAL-O-RING  
41. 6V-8635 [2] CONNECTOR  
42. 6V-8640 [2] CONNECTOR  
43. 6V-8714 [2] CONNECTOR  
44. 6V-8724 [4] ELBOW  
45. 6V-8789 [2] TEE  
46. 6V-9746 [8] SEAL-O-RING  
47. 7D-4092 [6] CLIP  
48. 7M-8485 [10] SEAL-O-RING  
49. 7X-0752 M [1] BOSS-WELD (M10X1.5X65-MM)  
50. 8C-8762 [2] ELBOW  
51. 8T-4121 C [22] WASHER-HARD (11X21X2.5-MM THK)  
52. 8T-4133 CM [11] NUT (M10X1.5-THD)  
53. 8T-4136 CM [11] BOLT (M10X1.5X25-MM)  
54. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
55. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
56. 5P-4484 [2] PLUG-MAGNETIC  
57. 9S-4185 [3] PLUG (3/4-16-THD)  
58. 7X-7729 [2] WASHER (11X25X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 950G :

GEAR GP-OUTPUT TRANSFER
157-0955 GEAR GP-OUTPUT TRANSFER
GEAR GP-OUTPUT TRANSFER
114-8947 GEAR GP-OUTPUT TRANSFER
GEAR GP-BEVEL & PINION
157-0340 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0778 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0778 GEAR GP-BEVEL & PINION
GEAR GP-BEVEL & PINION
112-0738 GEAR GP-BEVEL & PINION
FILTER GP-OIL
122-6456 FILTER GP-OIL
FILTER & LINES GP-TRANSMISSION
142-8482 FILTER & LINES GP-TRANSMISSION
HOUSING GP-FIXED AXLE
112-0769 HOUSING GP-FIXED AXLE
HOUSING GP-FIXED AXLE
112-0769 HOUSING GP-FIXED AXLE
HOUSING GP-FIXED AXLE
214-6156 HOUSING GP-FIXED AXLE
HOUSING GP-OSCILLATING AXLE
112-0724 HOUSING GP-OSCILLATING AXLE
HOUSING GP-OSCILLATING AXLE
112-0724 HOUSING GP-OSCILLATING AXLE
261-5714 KIT-FINAL DRIVE BEARING
191-9329 KIT-TRANSMISSION BEARING
LINES GP-AXLE OIL COOLER
151-6297 LINES GP-AXLE OIL COOLER

Truck sale:

Caterpillar 950G
 
Caterpillar 950G
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
129,900 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 950GC, Wheel Loaders, Construction
185,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Caterpillar 950GC, Wheel Loaders, Construction
190,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
215,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.