AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

141-7869 GOVERNOR GP-UNIT INJECTOR S/N 55K2081-3590; 6JK1603-UP PART OF 119-2894 GOVERNOR GP-UNIT INJECTOR 962G


FUEL SYSTEM
GOVERNOR GP
NOZZLE GP-UNIT INJECTOR
LINES GP-FUEL
FILTER GP-FUEL
LINES GP-FUEL RATIO CONTROL
GOVERNOR GP
PUMP GP-FUEL INJECTION
FILTER GP-FUEL

WHEEL LOADER 962G WHEEL LOADER 6EW
 962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2645 962G 6EW   (1998)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
119-2894 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
141-7866 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
141-7869 GOVERNOR GP-UNIT INJECTOR
HOUSING GP-GOVERNOR
141-7863 HOUSING GP-GOVERNOR
LINES GP-GOVERNOR OIL
111-2125 LINES GP-GOVERNOR OIL
 

#SEBP26450130
 

141-7869: GOVERNOR GP-UNIT INJECTOR

141-7869 GOVERNOR GP-UNIT INJECTOR
S/N 55K2081-3590; 6JK1603-UP
PART OF 119-2894 GOVERNOR GP-UNIT INJECTOR
i00839577 SEBP2645
1417869 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-7872 [1] CAM AS  
2. 4P-2467 [1] SPRING GP-GOVERNOR  
3. 4P-5605 B [1] SHIM (0.5-MM THK)  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 100-4391 [1] SPRING-OIL SIDE  
7. 141-7866 Y [1] GOVERNOR GP-UNIT INJECTOR  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP26450131
 

141-7863: HOUSING GP-GOVERNOR

141-7863 HOUSING GP-GOVERNOR
S/N 55K2081-3590; 6JK1603-UP
PART OF 141-7866 GOVERNOR GP-UNIT INJECTOR
i00841001 SEBP2645
1417863 HOUSING GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7330 [1] HOUSING AS  
  100-5734 [1] SHAFT-LIMIT  
2. 111-6813 [1] MANIFOLD AS  
  8C-5899 [1] PIN-SPRING  
3. 109-1301 [1] PISTON  
4. 111-3815 [1] COLLAR AS  
5. 033-6032 [1] SEAL-O-RING  
6. 110-6096 [1] SPRING  
7. 111-1576 [1] SEAL-U-CUP  
8. 2M-9780 [1] SEAL-O-RING  
9. 105-4916 M [1] PLUG  
10. 9X-2537 M [3] BOLT-SOCKET HEAD (M6X1X70-MM)  
11. 110-6104 M [1] SCREW-ADJUSTMENT  
12. 4T-8691 M [1] NUT  
13. 129-7707 Y [1] VALVE GP-SOLENOID (DUAL HP)  
14. 033-5879 [1] SEAL-O-RING  
15. 6T-5098 [1] CLIP-CABLE  
16. 099-0822 M [1] BOLT-SOCKET HEAD (M5X0.8X10-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26450132
 

390-9331: KIT-INJECTOR

390-9331 KIT-INJECTOR
S/N 6EW1-UP
SINGLE FUEL INJECTOR
i05934805 SEBP2645
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  114-8718 [1] SEAL-O-RING  
  125-8274 [1] SEAL-O-RING  
 

#SEBP26450133
 

112-6972: LINES GP-FUEL

112-6972 LINES GP-FUEL
S/N 6EW1-UP
PART OF 126-7786 CHASSIS AR
i00808819 SEBP2645
1126972 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-2677 [2] SPACER (10.7X17.14X19.05-MM THK)  
2. 4H-1225 [1] WASHER (11X22X6-MM THK)  
3. 091-9956 I [1] HOSE AS  
4. 128-8013 I [1] HOSE AS  
5. 138-9936 I [1] HOSE AS  
6. 8X-9255 I [1] HOSE AS  
7. 146-2744 [1] TUBE AS  
8. 146-2745 [1] TUBE AS  
9. 146-5234 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
10. 147-6287 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
11. 2B-2404 [4] CLIP  
12. 3J-1907 [2] SEAL-O-RING  
13. 3J-7354 [1] SEAL-O-RING  
14. 4D-9517 [1] CLIP  
15. 4J-5477 [4] SEAL-O-RING  
16. 6V-8397 [6] SEAL-O-RING  
17. 6V-8628 [1] ELBOW  
18. 6V-8724 [2] ELBOW  
19. 6V-8934 [1] ADAPTER  
20. 6V-9850 [1] ELBOW  
21. 7B-1597 [3] CLIP  
22. 7S-0530 [1] CLIP  
23. 7X-2552 M [2] BOLT (M16X2X30-MM)  
24. 8M-2770 [1] CLIP (LOOP)  
25. 8M-2773 [1] CLIP (LOOP)  
26. 8T-3647 M [2] BOLT (M8X1.25X80-MM)  
27. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [1] NUT (M10X1.5-THD)  
29. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
30. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
31. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
32. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26450134
 

171-6968: LINES GP-FUEL FILTER

171-6968 LINES GP-FUEL FILTER
S/N 6JK5010-UP
PROVIDES A BRACKET AS. WITH A THROTTLE CABLE THAT HAS ADJUSTMENT AT THE GOVERNOR END
PART OF 116-8671 ENGINE AR
i01212714 SEBP2645
1716968 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
2. 3L-0594 [1] SPACER (8.7X15.9X15.9-MM THK)  
3. 5P-4961 [2] CLAMP-HOSE  
4. 7E-5189 [1] VALVE AS (FUEL)  
5. 7E-5190 [1] TUBE AS  
6. 7X-2459 [1] ADAPTER-TEE  
7. 9K-6060 [1] CLIP  
8. 129-1102 Y [1] BASE GP-FUEL FILTER  
9. 141-9297 [1] TUBE AS  
10. 141-9298 [1] TUBE AS  
11. 141-9299 [1] TUBE AS  
12. 149-0247 [1] BRACKET AS  
13. 165-0338 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
14. 165-7801 [1] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
15. 141-8275 [2] VALVE-DRAIN (FUEL)  
16. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
17. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
18. 3E-4353 [1] WASHER-HARD (11X25X3-MM THK)  
19. 3J-1907 [11] SEAL-O-RING  
20. 3N-3252 [1] SPRING  
21. 5F-7054 [1] SEAL-O-RING  
22. 5P-7813 [1] SEAL-O-RING  
23. 6V-1820 M [4] BOLT (M10X1.5X30-MM)  
24. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
25. 6V-3918 M [2] BOLT (M8X1.25X50-MM)  
26. 6V-4249 M [1] BOLT (M10X1.5X50-MM)  
27. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
28. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
29. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
30. 6V-8214 M [1] BOLT (M6X1X20-MM)  
31. 6V-8397 [6] SEAL-O-RING  
32. 6V-8724 [3] ELBOW  
33. 6V-8781 [1] TEE  
34. 6V-8837 M [1] BOLT (M6X1X16-MM)  
35. 8H-1603 [1] CLIP  
36. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
37. 8T-0100 M [1] BOLT (M8X1.25X60-MM)  
38. 8T-0151 [1] ADAPTER  
39. 8T-0276 M [2] BOLT (M8X1.25X45-MM)  
40. 8T-0640 M [1] BOLT (M6X1X30-MM)  
41. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
42. 9S-1350 [1] CLIP  
43. 9S-4191 [3] PLUG (9/16-18-THD)  
44. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
45. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
46. 103-2529 E HOSE (55CM EACH)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26450135
 

107-7731: LINES GP-FUEL RATIO CONTROL

107-7731 LINES GP-FUEL RATIO CONTROL
S/N 55K2081-3590; 6JK1603-UP
PART OF 136-5993 ENGINE AR-CORE
i00192115 SEBP2645
1077731 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8647 [1] CONNECTOR  
2. 6V-8723 [1] ELBOW  
3. 107-7680 [1] TUBE AS  
4. 3K-0360 [1] SEAL-O-RING  
5. 4J-5477 [1] SEAL-O-RING  
6. 3J-7354 [1] SEAL-O-RING  
7. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
8. 6V-8397 [1] SEAL-O-RING  
9. 8M-2772 [1] CLIP (LOOP)  
 

#SEBP26450136
 

111-2125: LINES GP-GOVERNOR OIL

111-2125 LINES GP-GOVERNOR OIL
S/N 55K2081-3590; 6JK1603-UP
PART OF 119-2894 GOVERNOR GP-UNIT INJECTOR
i00671964 SEBP2645
1112125 LINES GP-GOVERNOR OIL Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8647 [2] CONNECTOR  
2. 111-2127 [1] TUBE AS  
3. 6V-8773 [1] TEE-FACE SEAL  
4. 7W-0367 [1] TUBE AS  
5. 3J-7354 [3] SEAL-O-RING  
6. 4J-5477 [4] SEAL-O-RING  
 

#SEBP26450137
 

107-7734: PUMP GP-FUEL INJECTION

107-7734 PUMP GP-FUEL INJECTION
S/N 55K2081-3590; 6JK1603-UP
PART OF 136-5993 ENGINE AR-CORE
i00743776 SEBP2645
1077734 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-8218 C [1] INJECTOR GP-FUEL  
2. 114-8718 C [1] SEAL-O-RING  
3. 139-5925 CM [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
4. 9X-8267 C [1] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26450138
 

154-6056: PUMP GP-FUEL PRM & PRIM FILTER

154-6056 PUMP GP-FUEL PRM & PRIM FILTER
S/N 6EW1-231
PART OF 156-8049 INSTALLATION AR-ENGINE
i00840998 SEBP2645
1546056 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4961 [1] CLAMP-HOSE  
2. 160-1067 I [1] HOSE AS  
3. 141-8275 [1] VALVE-DRAIN (FUEL)  
4. 149-2683 Y [1] SEPARATOR GP-WATER  
5. 3E-7410 [1] TEE  
6. 3J-1907 [6] SEAL-O-RING  
7. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
8. 6V-8397 [2] SEAL-O-RING  
9. 6V-8636 [2] CONNECTOR  
10. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
11. 9S-4191 [2] PLUG (9/16-18-THD)  
12. 103-2529 E HOSE (55 CM)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26450139
 

177-0766: PUMP GP-FUEL PRM & PRIM FILTER

177-0766 PUMP GP-FUEL PRM & PRIM FILTER
S/N 6EW232-UP
PART OF 156-8049 INSTALLATION AR-ENGINE
i01161047 SEBP2645
1770766 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4961 [1] CLAMP-HOSE  
2. 160-1067 I [1] HOSE AS  
3. 141-8275 [1] VALVE-DRAIN (FUEL)  
4. 152-5478 Y [1] PUMP GP-FUEL PRM & WATER SEP  
5. 3E-7410 [1] TEE  
6. 3J-1907 [6] SEAL-O-RING  
7. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
8. 6V-8397 [2] SEAL-O-RING  
9. 6V-8636 [2] CONNECTOR  
10. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
11. 9S-4191 [2] PLUG (9/16-18-THD)  
12. 103-2529 E HOSE (55CM)  
13. 3S-2093 [1] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Governor
3114, 3116, 3126 Engines
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 962G :

GOVERNOR GP-UNIT INJECTOR
141-7866 GOVERNOR GP-UNIT INJECTOR
119-2894 GOVERNOR GP-UNIT INJECTOR
FILTER & LINES GP-SEC FUEL
138-1827 FILTER & LINES GP-SEC FUEL
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9912 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
HOUSING GP-GOVERNOR
141-7863 HOUSING GP-GOVERNOR
390-9331 KIT-INJECTOR
LINES GP-FUEL
112-6972 LINES GP-FUEL
LINES GP-FUEL FILTER
171-6968 LINES GP-FUEL FILTER
LINES GP-FUEL RATIO CONTROL
107-7731 LINES GP-FUEL RATIO CONTROL
LINES GP-GOVERNOR OIL
111-2125 LINES GP-GOVERNOR OIL
PUMP GP-FUEL INJECTION
107-7734 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRM & PRIM FILTER
154-6056 PUMP GP-FUEL PRM & PRIM FILTER

Truck sale:

Caterpillar 962G
 
Caterpillar 962G
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 962G, Wielladers, Bouw
59.000 
Caterpillar 962G, Wielladers, Bouw

QUINN COMPANY
Caterpillar 962G2, Wheel Loaders, Construction
 
Caterpillar 962G2, Wheel Loaders, Construction

CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 962G2, Wheel Loaders, Construction
 
Caterpillar 962G2, Wheel Loaders, Construction
- Wheel loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 962G, Radlader, Bau-Und Bergbauausrüstung
96.768 
Caterpillar 962G, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.