AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3512 Generator Set Engine With EUI Option 3MS00001-UP SERVICE EQUIPMENT AND SUPPLIES Caterpillar SIS



GEN SET ENGINE 3512 GEN SET ENGINE 3MS
 3512 Generator Set Engine With EUI Option 3MS00001-UP SEBP2656 3512 3MS   (1996)

Parts group 3512:

  For full view, you need register
SERVICE EQUIPMENT AND SUPPLIES
CARTRIDGE KITS
100-4095 CARTRIDGE GP-TURBOCHARGER
100-4095 CARTRIDGE GP-TURBOCHARGER
PART OF 102-0297 TURBOCHARGER GP
AN ATTACHMENT
102-0292 CARTRIDGE GP-TURBOCHARGER
102-0292 CARTRIDGE GP-TURBOCHARGER
PART OF 131-5366 TURBOCHARGER GP
CHARTS & FILMS
6L-4502 CHART-PLATE & FILM
6L-4502 CHART-PLATE & FILM
FILTERS
FILTER GP-ENGINE OIL
9Y-1155 FILTER GP-ENGINE OIL
9Y-1155 FILTER GP-ENGINE OIL
S/N 3MS1-231
FILTER GP-ENGINE OIL
9Y-1155 FILTER GP-ENGINE OIL
9Y-1155 FILTER GP-ENGINE OIL
S/N 3MS232-UP
COOLER GP-ENGINE OIL
4W-5892 COOLER GP-ENGINE OIL
4W-5892 COOLER GP-ENGINE OIL
AIR CLEANER GP
5N-7822 AIR CLEANER GP
5N-7822 AIR CLEANER GP
AN ATTACHMENT
AIR CLEANER GP
8N-3378 AIR CLEANER GP
8N-3378 AIR CLEANER GP
PART OF 8N-9302 AIR CLEANER GP
AN ATTACHMENT
AIR CLEANER GP
8N-9302 AIR CLEANER GP
8N-9302 AIR CLEANER GP
INDUSTRIAL
AN ATTACHMENT
FILTER GP-FUEL
115-0739 FILTER GP-FUEL
115-0739 FILTER GP-FUEL
FILTER GP-PRIMARY FUEL
8N-6435 FILTER GP-PRIMARY FUEL
8N-6435 FILTER GP-PRIMARY FUEL
AN ATTACHMENT
GASKET & SEAL KITS
106-3385 KIT-GASKET
106-3385 KIT-GASKET -SINGLE FUEL INJECTOR
FIELD INSTALLATION
165-7573 KIT-GASKET
165-7573 KIT-GASKET -FRONT STRUCTURE
FIELD REPLACEMENT ORDER @@@@@572-2729@@@@@
FOR USE WITH E274- ENGINE S/N 24Z 6027-UP
FIELD INSTALLATION
196-0237 KIT-GASKET
196-0237 KIT-GASKET -WATER PUMP
FIELD INSTALLATION
200-1886 KIT-GASKET
200-1886 KIT-GASKET -WATER LINES
KIT CONTAINS THE GASKETS AND SEALS NEEDED TO REINSTALL UPPER WATER MANIFILDS AND REGULATORS.
FOR USE WITH @@@@@129-5490@@@@@
FIELD INSTALLATION
201-1519 KIT-GASKET
201-1519 KIT-GASKET -REAR STRUCTURE
CONTAINS THE GASKETS & SEALS TO REINSTALL THE FLYWHEEL HOUSING, CRANKSHAFT SEAL, & REAR COVERS. THIS KIT DOES NOT INCLUDE AN OIL PAN GASKET. ***FLYWHEEL HOUSING GASKET IS NOT INCLUDED IN THIS KIT. CATERPILLAR RECOMMENDS USING LOCTITE HI-TEMP FLANGE SEALANT (FOR EUROPE, AFRICA, & MIDDLE EAST USE LOCTITE 5188). IN PLACE OF THE GASKET & MUST BE ORDERED SEPARATELY FROM LOCTITE.***
FOR USE WITH @@@@@129-5490@@@@@
FIELD INSTALLATION
219-0280 KIT-GASKET
219-0280 KIT-GASKET -EXTERNAL OIL PUMP
THIS KIT IS BEING RELEASED TO PROVIDE A NEW OIL PUMP KIT FOR THE 3500 SERIES FAMILY OF ENGINES. CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL AN EXTERNAL OIL PUMP.
FIELD INSTALLATION
313-4914 KIT-GASKET
313-4914 KIT-GASKET
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES
FOR USE WITH @@@@@129-5490@@@@@, E261- ENGINE S/N 49Y 1-UP, E274- ENGINE S/N 24Z 1-UP, E304- ENGINE S/N 65Z 1-UP, E306- ENGINE S/N 67Z 1-UP, E307- ENGINE S/N 71Z 1-UP, E309- ENGINE S/N 73Z 1-UP, E408- ENGINE S/N 6PM 1-UP, E506- ENGINE S/N 3MS 1-UP
FIELD INSTALLATION
355-0774 KIT-GASKET
355-0774 KIT-GASKET
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. EUI APPLICATIONS, WITH STANDARD EXHAUST 320-8974 GASKET AND THE EARLY VALVE BODY GASKET 7E-3772, THIS KIT DOES NOT CONTAIN INJECTOR SEALS, BREATHER SEALS, VALVE STEM SEALS, OR ROCKER ARM BUTTON SEALS. ORDER AS NEEDED
FOR USE WITH @@@@@129-5490@@@@@, E408- ENGINE S/N 6PM1-UP, E409- ENGINE S/N 7KM1-UP, ENGINE ARRANGEMENT 150-4193, E505- ENGINE S/N 3LS1-UP, E506- ENGINE S/N 3MS1-UP, E507- ENGINE S/N 3NS1-UP, RM510- ENGINE S/N 7YG1-UP, MACHINE S/N 2TK1-UP, RM510- ENGINE S/N 7YG1-UP, MACHINE S/N 2TK1-UP, RM511- ENGINE S/N 7YG1-UP, MACHINE S/N 4XJ1-UP, RM512- ENGINE S/N 4WJ1-UP, MACHINE S/N 5RK1-UP, RM512- ENGINE S/N 4WJ1-UP, MACHINE S/N 5RK1-UP, RM513- ENGINE S/N 4WJ1-UP, MACHINE S/N 6HK1-UP, RM513- ENGINE S/N 4WJ1-UP, MACHINE S/N 6HK1-UP, RM514- ENGINE S/N 2PK1-UP, MACHINE S/N 7EK1-UP, RM514- ENGINE S/N 2PK1-UP, MACHINE S/N 7EK1-UP, T632- ENGINE S/N 7YG1-UP, MACHINE S/N 4HK1-UP, T793- ENGINE S/N 7YG1-UP, MACHINE S/N 8ZR1-UP, X217- ENGINE S/N 2PK1-UP, MACHINE S/N 5ZL1-UP, X218- ENGINE S/N 2PK1-UP, MACHINE S/N 7LL1-UP
FIELD INSTALLATION
LUBRICANTS & FLUIDS
GREASE GUN GP
8F-9866 GREASE GUN GP
8F-9866 GREASE GUN GP
PART OF 9S-7977 TOOL GP-HAND
Type 1
AN ATTACHMENT
GREASE GUN GP
8F-9866 GREASE GUN GP
8F-9866 GREASE GUN GP
PART OF 9S-7977 TOOL GP-HAND
Type 2
AN ATTACHMENT
TOOLS
GREASE GUN GP
8F-9866 GREASE GUN GP
8F-9866 GREASE GUN GP
PART OF 9S-7977 TOOL GP-HAND
Type 1
AN ATTACHMENT
GREASE GUN GP
8F-9866 GREASE GUN GP
8F-9866 GREASE GUN GP
PART OF 9S-7977 TOOL GP-HAND
Type 2
AN ATTACHMENT
TOOL GP-HAND
9S-7977 TOOL GP-HAND
9S-7977 TOOL GP-HAND
AN ATTACHMENT
KIT-REBUILD
438-0141 KIT-ENGINE GASKET
438-0141 KIT-ENGINE GASKET
CLASSIC
FIELD INSTALLATION
572-2729 KIT-ENGINE GASKET
572-2729 KIT-ENGINE GASKET
FRONT STRUCTURE
FIELD REPLACEMENT FOR @@@@@165-7573@@@@@
FOR USE WITH @@@@@129-5490@@@@@
FIELD INSTALLATION
222-5152 KIT-WATER PUMP
222-5152 KIT-WATER PUMP
FIELD INSTALLATION
332-8866 KIT-ELECTRONIC CONVERSION
332-8866 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL +
PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC
FIELD REPLACEMENT FOR @@@@@133-6350@@@@@
FOR USE WITH NON-3508 BASED ENGINE APPLICATIONS
333-2392 KIT-ELECTRONIC CONVERSION
333-2392 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL +
PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC
FIELD REPLACEMENT FOR @@@@@133-6350@@@@@
FOR USE WITH G3304, G3306, G3406, G3408, G3408C, G3412, G3412C, G3508, G3512, AND G3516 ENGINES
333-2393 KIT-ELECTRONIC CONVERSION
333-2393 KIT-ELECTRONIC CONVERSION -GENERATOR SET CONTROL +
PROVIDES A SERVICE REPLACEMENT KIT FOR THE EMCP II GSC
FIELD REPLACEMENT FOR @@@@@133-6350@@@@@
FOR USE WITH 3508 AND 3508B ENGINE APPLICATIONS
106-3385 KIT-GASKET
106-3385 KIT-GASKET -SINGLE FUEL INJECTOR
FIELD INSTALLATION
165-7573 KIT-GASKET
165-7573 KIT-GASKET -FRONT STRUCTURE
FIELD REPLACEMENT ORDER @@@@@572-2729@@@@@
FOR USE WITH E274- ENGINE S/N 24Z 6027-UP
FIELD INSTALLATION
196-0237 KIT-GASKET
196-0237 KIT-GASKET -WATER PUMP
FIELD INSTALLATION
200-1886 KIT-GASKET
200-1886 KIT-GASKET -WATER LINES
KIT CONTAINS THE GASKETS AND SEALS NEEDED TO REINSTALL UPPER WATER MANIFILDS AND REGULATORS.
FOR USE WITH @@@@@129-5490@@@@@
FIELD INSTALLATION
201-1519 KIT-GASKET
201-1519 KIT-GASKET -REAR STRUCTURE
CONTAINS THE GASKETS & SEALS TO REINSTALL THE FLYWHEEL HOUSING, CRANKSHAFT SEAL, & REAR COVERS. THIS KIT DOES NOT INCLUDE AN OIL PAN GASKET. ***FLYWHEEL HOUSING GASKET IS NOT INCLUDED IN THIS KIT. CATERPILLAR RECOMMENDS USING LOCTITE HI-TEMP FLANGE SEALANT (FOR EUROPE, AFRICA, & MIDDLE EAST USE LOCTITE 5188). IN PLACE OF THE GASKET & MUST BE ORDERED SEPARATELY FROM LOCTITE.***
FOR USE WITH @@@@@129-5490@@@@@
FIELD INSTALLATION
219-0280 KIT-GASKET
219-0280 KIT-GASKET -EXTERNAL OIL PUMP
THIS KIT IS BEING RELEASED TO PROVIDE A NEW OIL PUMP KIT FOR THE 3500 SERIES FAMILY OF ENGINES. CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL AN EXTERNAL OIL PUMP.
FIELD INSTALLATION
313-4914 KIT-GASKET
313-4914 KIT-GASKET
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES
FOR USE WITH @@@@@129-5490@@@@@, E261- ENGINE S/N 49Y 1-UP, E274- ENGINE S/N 24Z 1-UP, E304- ENGINE S/N 65Z 1-UP, E306- ENGINE S/N 67Z 1-UP, E307- ENGINE S/N 71Z 1-UP, E309- ENGINE S/N 73Z 1-UP, E408- ENGINE S/N 6PM 1-UP, E506- ENGINE S/N 3MS 1-UP
FIELD INSTALLATION
355-0774 KIT-GASKET
355-0774 KIT-GASKET
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. EUI APPLICATIONS, WITH STANDARD EXHAUST 320-8974 GASKET AND THE EARLY VALVE BODY GASKET 7E-3772, THIS KIT DOES NOT CONTAIN INJECTOR SEALS, BREATHER SEALS, VALVE STEM SEALS, OR ROCKER ARM BUTTON SEALS. ORDER AS NEEDED
FOR USE WITH @@@@@129-5490@@@@@, E408- ENGINE S/N 6PM1-UP, E409- ENGINE S/N 7KM1-UP, ENGINE ARRANGEMENT 150-4193, E505- ENGINE S/N 3LS1-UP, E506- ENGINE S/N 3MS1-UP, E507- ENGINE S/N 3NS1-UP, RM510- ENGINE S/N 7YG1-UP, MACHINE S/N 2TK1-UP, RM510- ENGINE S/N 7YG1-UP, MACHINE S/N 2TK1-UP, RM511- ENGINE S/N 7YG1-UP, MACHINE S/N 4XJ1-UP, RM512- ENGINE S/N 4WJ1-UP, MACHINE S/N 5RK1-UP, RM512- ENGINE S/N 4WJ1-UP, MACHINE S/N 5RK1-UP, RM513- ENGINE S/N 4WJ1-UP, MACHINE S/N 6HK1-UP, RM513- ENGINE S/N 4WJ1-UP, MACHINE S/N 6HK1-UP, RM514- ENGINE S/N 2PK1-UP, MACHINE S/N 7EK1-UP, RM514- ENGINE S/N 2PK1-UP, MACHINE S/N 7EK1-UP, T632- ENGINE S/N 7YG1-UP, MACHINE S/N 4HK1-UP, T793- ENGINE S/N 7YG1-UP, MACHINE S/N 8ZR1-UP, X217- ENGINE S/N 2PK1-UP, MACHINE S/N 5ZL1-UP, X218- ENGINE S/N 2PK1-UP, MACHINE S/N 7LL1-UP
FIELD INSTALLATION
171-6721 KIT-PARTS
171-6721 KIT-PARTS -EMCP
S/N 3MS181-UP
PART OF 121-8856 CONNECTION GP-ELECTRICAL
FOR USE WITH DIN RAIL MOUNTED TERMINAL STRIPS, USED TO MAKE INTERCONNECTIONS ON EMCP AND ENGINE WIRING HARNESSES
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
Reliability And Fatigue Strength Improved In Connecting Rod {1218,1219}
1997/08/01
Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/09/01
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
Service Magazine
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Operation and Maintenance Manual
Reference Numbers
3500 and 3500B Engines
Safety Messages
3500 and 3500B Engines
Special Instruction
Generator Set Start-up Checklist{1021, 1404, 7002}
Generator Set Start-up Checklist{1021, 1404, 7002}
Installation of the 225-4256 Film {7405, 7557}
Installation of the 225-4256 Film {7405, 7557}
Service Magazine
Service Charts and Decals Available {0374, 0375, 7405, 7557}
2000/03/06
Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}
Engine News
New Tightening Specification For "Spin-on" Oil Filter Assembly {1306,1308}
1998/01/20
An Improved Spin-On Oil Filter Is Now Available {1306, 1308}
2003/07/01
Improved Spin-On Engine Oil Filters are Used {1308}
2005/08/15
Operation and Maintenance Manual
Engine Air Cleaner Element (Dual Element) - Clean/Replace
3500 and 3500B Engines
Engine Air Precleaner - Clean
3500 and 3500B Engines
Fuel System Primary Filter - Clean/Inspect/Replace
3500 and 3500B Engines
Engine Air Cleaner Element (Single Element) - Clean/Replace
3500 and 3500B Engines
Fuel System Secondary Filter - Replace
3500 and 3500B Engines
Engine Oil and Filter - Change
3500 and 3500B Engines
Refill Capacities and Recommendations
3500 and 3500B Engines
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Letter-NACD
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Australia
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-CFEL
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-CSARL
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Americas
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Truck/Ag/Marine
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Specifications
Fuel Filter Base
3500 Engines with EUI Option
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Asia
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Letter-APD
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Magazine
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Engine News
Improvements to Caterpillar's Gasket Kits for Engines {7555}
2001/01/01
New Seals for the Front Housing {1151, 1207}
2003/10/01
Improved Gasket for the Engine Oil Cooler {1378, 7555}
2004/04/01
New Seal for the Front Housing {1151, 1207}
2004/06/01
A New Cylinder Head Gasket is Used {1124}
2006/07/24
New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2010/01/18
A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
2010/12/16
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2011/08/09
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Technical Information Bulletin
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Magazine
Improved Caterpillar O-ring Face Seals are Now Available {7555}
2000/05/08
Engine News
New Hardware Used In Radiator Mounting Groups{1353}
1998/05/01
Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01
The Torque Value Has Changed For High Temperature Locknut {7553}
2000/03/01
Sealing and Installing the Flywheel Housing {1157, 7555}
2006/03/27
Inspection of Steel Braided Hoses with Reusable Connectors {7553, 7554}
2008/01/21
Special Instruction
Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}
Technical Information Bulletin
Do Not Use Unapproved Connecting Rod 7N-2405 Bolts for 3500 and G3500 Engines{1225, 7553}
Do Not Use Unapproved Connecting Rod 7N-2405 Bolts for 3500 and G3500 Engines{1225, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01
The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374}
2002/05/01
The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
2002/12/01
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Special Instruction
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Tool Operating Manual
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Reuse And Salvage Guidelines
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
General Salvage and Reconditioning Techniques {0374, 1000}
General Salvage and Reconditioning Techniques {0374, 1000}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Service Magazine
Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/01/31
The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374}
2002/05/13
Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374}
2002/06/03
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17
A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/22
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
Engine News
A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
2001/11/01
Understanding Elevated Copper Levels in Used Oil Samples {1348, 7542}
2003/02/01
Antifreeze is Added to the Corrosion Inhibitor {1395}
2003/11/01
Special Publication, SEBU6251, "Caterpillar Commercial Diesel Engine Fluids Recommendations" has been Revised {0645, 1000, 1250, 1280, 1300, 1348, 1350, 1395}
2004/05/01
The Engine Oil Recommendation for 3500 Series Diesel Engines has Changed {1300}
2004/12/01
A Procedure for Obtaining Fuel Samples {1280}
2005/06/20
A Dye is Now Added to the Engine Oil at the Factory {1348}
2007/06/04
Caterpillar Extended Life Inhibitor (ELI) Is Now Available for Use in Applications that Freeze Protection Is Not Needed {1350, 1352, 1395}
2010/10/06
Operation and Maintenance Manual
Battery Electrolyte Level - Check
3500 and 3500B Engines
Cooling System Coolant Extender (ELC) - Add
3500 and 3500B Engines
Engine Oil Sample - Obtain
3500 and 3500B Engines
Engine Oil Level - Check
3500 and 3500B Engines
Cooling System Coolant (DEAC) - Change
3500 and 3500B Engines
Cooling System Coolant (ELC) - Change
3500 and 3500B Engines
Fuel System Secondary Filter - Replace
3500 and 3500B Engines
Engine Oil and Filter - Change
3500 and 3500B Engines
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
3500 and 3500B Engines
Cooling System Coolant Sample (Level 1) - Obtain
3500 and 3500B Engines
Cooling System Coolant Sample (Level 2) - Obtain
3500 and 3500B Engines
Refill Capacities and Recommendations
3500 and 3500B Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
Technical Information Bulletin
Do Not Use Loctite Moly Paste 51049 on Critical Fasteners{0645}
Do Not Use Loctite Moly Paste 51049 on Critical Fasteners{0645}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21
A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
2001/11/19
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2002/04/01
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17
Truck Engine News
The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/08/01
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Engine News
Using The Correct Diode When Using The Customer Communication Module In Multiple Engine Applications{1902,0374}
1999/04/01
Several New Service Manuals And Revised Service Manual Modules Available {0374,1000}
1999/06/01
Several New Service Manuals and Revised Service Manual Modules Available{0374,1000}
1999/08/01
Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01
The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/09/01
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Special Instruction
Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Service Magazine
Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/01/31
Service Information System Product Structure Link Change for Service Letters that Address Parts Stock Distribution {1000, 7000, 7750}
2001/08/20
Correction to Service Magazine , "Use the Technical Information Feedback Systems" {0374}
2001/12/03
A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
Engine News
A Process for Product Support has been Established for the Custom Parts that are part of the 3500 Family and 3600 Family of Engine Packages {1000, 1800}
2001/10/01
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Operation and Maintenance Manual
Zinc Rods - Inspect/Replace
3500 and 3500B Engines
Special Instruction
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
Service Letter-Brazil
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING IF NEEDED 10R-4343 CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING FOR IMPROPERLY CALIBRATED 147-2059 PRE-SET TORQUE WRENCHES IN DEALER AND CUSTOMER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN FUEL INJECTORS IN DEALER PARTS STOCK
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Tool Operating Manual
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Reuse And Salvage Guidelines
Reuse and Salvage for 3500, 3600 & C175 Engine Oil Pans {1302}
Reuse and Salvage for 3500, 3600 & C175 Engine Oil Pans {1302}
Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Thermal Spray Procedures for Exhaust Manifold (I.D. &amp; O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Truck Engine News
A Guide to Reman Product Markings is Now Available {7754}
2015/09/18
Engine News
Introduction of New Pistons and Remanufactured Cylinder Packs {1214, 1239}
2003/11/01
A Guide to Reman Product Markings is Now Available {7754}
2015/09/17
Special Instruction
A Guide to Cat<SUP>&reg;</SUP> Reman Product Markings {7754}
A Guide to Cat® Reman Product Markings {7754}
Service Letter-NACD
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}
Thermal Spray Procedures for Exhaust Manifold (I.D. &amp; O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Service Letter-APD
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
0R6757, 0R6758, 0R6789, 0R6790, 0R6791, 0R6793, 0R6794, 0R6796, 0R6798, 0R6799, 0R6800, 0R6801, 0R6803, and 0R6998 Remanufactured Turbochargers And Cartridge Groups Need To Be Removed From Dealer Parts Stock
Service Magazine
A Guide to Reman Product Markings is Now Available {7754}
2015/09/15
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Engine News
New Valve Lash Adjusting Tool Group Released For All 3500 Engines{0600,1105,1121}
1998/05/01
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
114-2410 Pyrometer Battery Shelf Life Extended {7466}
2000/02/01
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
New Fabricated Tool for Piston Pin Installation {1225}
2003/08/01
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 1900, 7610}
2008/05/26
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05
A New Check Valve Driver is Available for Certain 3500 Engines {0599, 0701}
A New Check Valve Driver is Available for Certain 3500 Engines {0599, 0701}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Hoses and Clamps - Inspect/Replace
3500 and 3500B Engines
Special Instruction
Using The 6V9450 Engine Pressure Group{781}
Using The 6V9450 Engine Pressure Group{781}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Reuse And Salvage Guidelines
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Shop Review
Engine Component Racks
Engine Component Racks
Engine Stands
Engine Stands
Bench Test Procedures
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Service Magazine
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
New Hydraulic Wrenches and Pumps {0602, 0615}
2000/06/01
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
2004/04/01
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
2014/12/05
A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
Provide Proper Documentation of Returned Parts within the Warranty Claim {1000}
2007/09/10
Insulation on Exhaust Components {1000}
2006/03/06
Operation and Maintenance Manual
Warranty Information
3500 and 3500B Engines
Emissions Warranty Information
3500 and 3500B Engines
Emissions Warranty Information
3500 and 3500B Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
New Packaging for Caterpillar Electronic Control Modules (ECM) {1901}
2007/08/13
Engine News
Reliability And Fatigue Strength Improved In Connecting Rod {1218,1219}
1997/08/01
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Special Instruction
Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Technical Information Bulletin
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.