3516 Generator Set Engine With EUI Option 3NS00001-UP ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

GEN SET ENGINE 3516B GEN SET ENGINE 3NS
3516 Generator Set Engine With EUI Option 3NS00001-UP SEBP2657 3516B 3NS (1996)

Parts group 3516B:

For full view, you need register

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING

7E-4836 MOUNTING GP-ALTERNATOR

7E-4836 MOUNTING GP-ALTERNATOR
AN ATTACHMENT

331-5717 ALTERNATOR GP-CHARGING

331-5717 ALTERNATOR GP-CHARGING
24-VOLT, 105-AMPERE
FIELD INSTALLATION

333-1184 ALTERNATOR GP-CHARGING

333-1184 ALTERNATOR GP-CHARGING
24-VOLT,60-AMPERE
PART OF 7E-2858 ALTERNATOR GP-CHARGING
AN ATTACHMENT

3T-6352 ALTERNATOR GP-CHARGING

3T-6352 ALTERNATOR GP-CHARGING
24-VOLT, 35-AMPERE
PART OF 6N-9294 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT ORDER @@@@@ 6N-9294@@@@@
AN ATTACHMENT

6N-9294 ALTERNATOR GP-CHARGING

6N-9294 ALTERNATOR GP-CHARGING
24-VOLT, 35-AMPERE
PART OF 7C-4803 ALTERNATOR GP-CHARGING
Type 1
FIELD REPLACEMENT FOR @@@@@ 9G-4574@@@@@, @@@@@ 3T-6352@@@@@
AN ATTACHMENT

6N-9294 ALTERNATOR GP-CHARGING

6N-9294 ALTERNATOR GP-CHARGING
24-VOLT, 35-AMPERE
PART OF 7C-4803 ALTERNATOR GP-CHARGING
Type 2
FIELD REPLACEMENT FOR @@@@@ 9G-4574@@@@@, @@@@@ 3T-6352@@@@@
AN ATTACHMENT

7C-4803 ALTERNATOR GP-CHARGING

7C-4803 ALTERNATOR GP-CHARGING
24-VOLT, 35-AMPERE
AN ATTACHMENT

7E-2858 ALTERNATOR GP-CHARGING

7E-2858 ALTERNATOR GP-CHARGING
24-VOLT, 60-AMPERE
AN ATTACHMENT

7N-9720 ALTERNATOR GP-CHARGING

7N-9720 ALTERNATOR GP-CHARGING
24-VOLT, 35-AMPERE
PART OF 6N-9294 ALTERNATOR GP-CHARGING
AN ATTACHMENT

9G-4574 ALTERNATOR GP-CHARGING

9G-4574 ALTERNATOR GP-CHARGING
24-VOLT, 35-AMPERE
PART OF 6N-9294 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT ORDER @@@@@ 6N-9294@@@@@
AN ATTACHMENT

126-9191 GROUND GP-ELECTRICAL

126-9191 GROUND GP-ELECTRICAL -ALTERNATOR
AN ATTACHMENT

BATTERY GP

7C-3874 BATTERY CHARGER

7C-3874 BATTERY CHARGER
24-VOLT DC WITH FAILURE ALARM
FOR USE WITH LEAD ACID OR NICAD BATTERIES
AN ATTACHMENT

7W-0408 BATTERY CHARGER

7W-0408 BATTERY CHARGER
24-VOLT
FOR USE WITH LEAD ACID OR NICAD BATTERY
AN ATTACHMENT

178-3323 BATTERY GP

178-3323 BATTERY GP
PROVIDES HARDWARE, CABLES, BATTERIES AND RACK SUPPORT FOR ONE SET OF BATTERIES TO STARTER AND DISCONNECT SWITCH
FOR USE WITH ENCLOSURES AND POWER MODULES
AN ATTACHMENT

6I-3164 BATTERY GP

6I-3164 BATTERY GP
24-VOLT, 1250-COLD CRANKING AMPERE, 210-AMPERE HOUR
PART OF 178-3323 BATTERY GP
AN ATTACHMENT

7L-7871 BATTERY GP

7L-7871 BATTERY GP
24-VOLT, 1000-COLD CRANKING AMPERE, 140-AMPERE HOUR
AN ATTACHMENT

7L-7872 BATTERY GP

7L-7872 BATTERY GP
24-VOLT. 1300-COLD CRANKING AMPERE. 190-AMPERE HOUR
AN ATTACHMENT

9X-9730 BATTERY GP

9X-9730 BATTERY GP -DRY
12-VOLT
PART OF 6I-3164, 7L-7872 BATTERY GP
AN ATTACHMENT

7W-0825 CABLE GP-BATTERY

7W-0825 CABLE GP-BATTERY
PROVIDES A POSITIVE AND A NEGATIVE CABLE ASSEMBLY
AN ATTACHMENT

176-1057 SUPPORT GP-BATTERY

176-1057 SUPPORT GP-BATTERY
PART OF 178-3323 BATTERY GP
AN ATTACHMENT

3N-7056 SUPPORT GP-BATTERY

3N-7056 SUPPORT GP-BATTERY
FLOOR TYPE, 2-BATTERY
AN ATTACHMENT

BOX GP

115-5164 BOX & MOUNTING GP

115-5164 BOX & MOUNTING GP -POWER DISTRIBUTION
CANNOT BE USED WITH ELECTRIC STARTERS
AN ATTACHMENT

116-8009 BOX GP-JUNCTION

116-8009 BOX GP-JUNCTION -AIR SHUTOFF
FOR USE WITH @@@@@113-1324@@@@@
AN ATTACHMENT

157-2792 STRIP AS-TERMINAL

157-2792 STRIP AS-TERMINAL -EMCP II
PART OF 121-4450 PANEL GP-CONTROL
AN ATTACHMENT

170-5394 STRIP GP-TERMINAL

170-5394 STRIP GP-TERMINAL -EUI
S/N 3NS223-UP
PART OF 121-8856 CONNECTION GP-ELECTRICAL
AN ATTACHMENT

170-5397 STRIP GP-TERMINAL

170-5397 STRIP GP-TERMINAL -AC
S/N 3NS223-UP
PART OF 121-8856 CONNECTION GP-ELECTRICAL
AN ATTACHMENT

170-5399 STRIP GP-TERMINAL

170-5399 STRIP GP-TERMINAL -DC
S/N 3NS223-UP
PART OF 121-8856 CONNECTION GP-ELECTRICAL
AN ATTACHMENT

CIRCUIT BREAKER GP

6T-3645 CIRCUIT BREAKER GP

6T-3645 CIRCUIT BREAKER GP
60-AMPERE
PART OF 105-3255 MOUNTING GP-CIRCUIT BREAKER, 132-8270 WIRING GP-ENGINE
AN ATTACHMENT

105-3255 MOUNTING GP-CIRCUIT BREAKER

105-3255 MOUNTING GP-CIRCUIT BREAKER
FOR USE WITH EMCPII CONTROL PANEL
AN ATTACHMENT

CONTACTOR GP

4W-2767 CONTACTOR GP

4W-2767 CONTACTOR GP
ALARM
AN ATTACHMENT

4W-2768 CONTACTOR GP

4W-2768 CONTACTOR GP
SHUTOFF
AN ATTACHMENT

7E-6469 MOUNTING GP-CONTACTOR

7E-6469 MOUNTING GP-CONTACTOR -ALARM OR SHUTOFF
AN ATTACHMENT

ELECTRONICS GP-ENGINE

101-1172 CONTROL & MTG GP-ENGINE ELEK

101-1172 CONTROL & MTG GP-ENGINE ELEK -PRIMARY

144-3635 CONTROL GP-ENG RATINGS ELEK

144-3635 CONTROL GP-ENG RATINGS ELEK
FIELD INSTALLATION

176-6047 CONTROL GP-ENG RATINGS ELEK

176-6047 CONTROL GP-ENG RATINGS ELEK
S/N 3NS229-UP
FIELD INSTALLATION

180-1733 CONTROL GP-ENG RATINGS ELEK

180-1733 CONTROL GP-ENG RATINGS ELEK
S/N 3NS229-UP
FIELD INSTALLATION

130-7481 CONTROL GP-ENGINE ELECTRONIC

130-7481 CONTROL GP-ENGINE ELECTRONIC
S/N 3NS1-240
PART OF 132-8900 CONTROL GP-ENGINE ELECTRONIC

132-8900 CONTROL GP-ENGINE ELECTRONIC

132-8900 CONTROL GP-ENGINE ELECTRONIC
S/N 3NS1-240
PART OF 101-1172 CONTROL & MTG GP-ENGINE ELEK

132-8900 CONTROL GP-ENGINE ELECTRONIC

132-8900 CONTROL GP-ENGINE ELECTRONIC
S/N 3NS241-UP
PART OF 101-1172 CONTROL & MTG GP-ENGINE ELEK

133-9300 CONTROL GP-ENGINE ELECTRONIC

133-9300 CONTROL GP-ENGINE ELECTRONIC -RELAY
AN ATTACHMENT

176-7503 CONTROL GP-ENGINE ELECTRONIC

176-7503 CONTROL GP-ENGINE ELECTRONIC
S/N 3NS241-UP
PART OF 132-8900 CONTROL GP-ENGINE ELECTRONIC

143-2871 MOUNTING GP-CONTROL

143-2871 MOUNTING GP-CONTROL
PART OF 141-4099, 141-4100, 141-4101, 145-0191, 145-0192 CONNECTION GP-INTERFACE
AN ATTACHMENT

CONVERTER GP-ELECTRICAL

9X-9591 CONVERTER GP-ELECTRICAL

9X-9591 CONVERTER GP-ELECTRICAL
PULSE WIDTH MODULATED
PART OF 120-4489 HARNESS GP-WIRING, 134-6323 WIRING GP-PANEL
AN ATTACHMENT

ELECTRONICS GP

141-3281 MODULE GP-INTERFACE

141-3281 MODULE GP-INTERFACE
SYSTEMS COMMUNICATION, SPECIFIC COMMUNICATION PROTOCOL CONVERTOR FOR HANDSHAKING THE ADEM/DVR/SLC500 PLC
PART OF 141-4099 CONNECTION GP-INTERFACE
AN ATTACHMENT

141-3282 MODULE GP-INTERFACE

141-3282 MODULE GP-INTERFACE
SYSTEMS COMMUNICATION, SPECIFIC COMMUNICATION PROTOCOL CONVERTOR FOR HANDSHAKING THE ADEM/DVR/S5 PLC
PART OF 141-4100 CONNECTION GP-INTERFACE
AN ATTACHMENT

141-3283 MODULE GP-INTERFACE

141-3283 MODULE GP-INTERFACE
SYSTEMS COMMUNICATION, SPECIFIC COMMUNICATION PROTOCOL CONVERTOR FOR HANDSHAKING THE ADEM/DVE/SNP PLC
PART OF 141-4101 CONNECTION GP-INTERFACE
AN ATTACHMENT

145-0193 MODULE GP-INTERFACE

145-0193 MODULE GP-INTERFACE
PROTOCOL CONVERTOR, CAPABLE OF RS-232 OR RS-485 COMMUNICATION
PART OF 145-0191 CONNECTION GP-INTERFACE
AN ATTACHMENT

145-0194 MODULE GP-INTERFACE

145-0194 MODULE GP-INTERFACE
SYSTEMS COMMUNICATION, SPECIFIC COMMUNICATION PROTOCOL CONVERTOR FOR HANDSHAKING THE ADEM/DVR
PART OF 145-0192 CONNECTION GP-INTERFACE
AN ATTACHMENT

154-7081 MODULE GP-INTERFACE

154-7081 MODULE GP-INTERFACE
PROTOCOL CONVERTER, CAPABLE OF RS-232/RS-422/OR RS-485 COMMUNICATION
PART OF 145-0193 MODULE GP-INTERFACE
AN ATTACHMENT

SENSOR GP

110-5959 SWITCH GP-COOLANT LEVEL

110-5959 SWITCH GP-COOLANT LEVEL
FOR USE WITH 35-CV RADIATOR
AN ATTACHMENT

121-2479 SWITCH GP-COOLANT LEVEL

121-2479 SWITCH GP-COOLANT LEVEL
FOR USE WITH 60-CV RADIATOR
AN ATTACHMENT

7E-9267 SWITCH GP-COOLANT LEVEL

7E-9267 SWITCH GP-COOLANT LEVEL
FOR USE WITH 46-CV RADIATOR
AN ATTACHMENT

9Y-7579 SWITCH GP-COOLANT LEVEL

9Y-7579 SWITCH GP-COOLANT LEVEL
FOR USE WITH 50-11 AND 60-13 FOLDED CORE RADIATOR
AN ATTACHMENT

9Y-7695 SWITCH GP-COOLANT LEVEL

9Y-7695 SWITCH GP-COOLANT LEVEL
CAN BE INSTALLED ON RIGHT OR LEFT SIDE OF RADIATOR TOP TANK
FOR USE WITH 72-25 FOLDED CORE RADIATOR
AN ATTACHMENT

163-1462 SENSOR & MTG GP-ELECTRIC

163-1462 SENSOR & MTG GP-ELECTRIC -ENGINE COOLANT
FOR USE WITH SEPARATE CIRCUIT AFTERCOOLER
AN ATTACHMENT

121-3356 SENSOR & MTG GP-RADIATOR

121-3356 SENSOR & MTG GP-RADIATOR
S/N 3NS1-245
FOR USE WITH SIZE 60 CONVENTIONAL DUAL RADIATORS
AN ATTACHMENT

121-3356 SENSOR & MTG GP-RADIATOR

121-3356 SENSOR & MTG GP-RADIATOR
S/N 3NS246-UP
FOR USE WITH SIZE 60 CONVENTIONAL DUAL RADIATORS
AN ATTACHMENT

121-3362 SENSOR & MTG GP-RADIATOR

121-3362 SENSOR & MTG GP-RADIATOR
S/N 3NS1-245
FOR USE WITH 72/25 RADIATOR
AN ATTACHMENT

121-3362 SENSOR & MTG GP-RADIATOR

121-3362 SENSOR & MTG GP-RADIATOR
S/N 3NS246-UP
FOR USE WITH 72/25 RADIATOR
AN ATTACHMENT

121-3364 SENSOR & MTG GP-RADIATOR

121-3364 SENSOR & MTG GP-RADIATOR
S/N 3NS1-245
FOR USE WITH SIZE 46 CONVENTIONAL RADIATORS
AN ATTACHMENT

121-3364 SENSOR & MTG GP-RADIATOR

121-3364 SENSOR & MTG GP-RADIATOR
S/N 3NS246-UP
Type 1
FOR USE WITH SIZE 46 CONVENTIONAL RADIATORS
AN ATTACHMENT

121-3364 SENSOR & MTG GP-RADIATOR

121-3364 SENSOR & MTG GP-RADIATOR
S/N 3NS246-UP
Type 2
FOR USE WITH SIZE 46 CONVENTIONAL RADIATORS
AN ATTACHMENT

129-2244 SENSOR & MTG GP-RADIATOR

129-2244 SENSOR & MTG GP-RADIATOR
Type 1
FOR USE WITH SIZE 35 CONVENTIONAL DUAL INLET/OUTLET RADIATORS
AN ATTACHMENT

129-2244 SENSOR & MTG GP-RADIATOR

129-2244 SENSOR & MTG GP-RADIATOR
Type 2
FOR USE WITH SIZE 35 CONVENTIONAL DUAL INLET/OUTLET RADIATORS
AN ATTACHMENT

111-3794 SENSOR GP-COOLANT LEVEL

111-3794 SENSOR GP-COOLANT LEVEL
PART OF 121-3356, 121-3362, 121-3364, 129-2244 SENSOR & MTG GP-RADIATOR
FIELD REPLACEMENT ORDER @@@@@165-6634@@@@@, @@@@@239-9957@@@@@
AN ATTACHMENT

165-6634 SENSOR GP-COOLANT LEVEL

165-6634 SENSOR GP-COOLANT LEVEL
FIELD REPLACEMENT ORDER @@@@@239-9957@@@@@
FIELD REPLACEMENT FOR @@@@@111-3794@@@@@

430-9449 SENSOR GP-COOLANT LEVEL

430-9449 SENSOR GP-COOLANT LEVEL
PART OF 121-3364 SENSOR & MTG GP-RADIATOR, 239-9957 SENSOR GP-LIQUID LEVEL
FIELD REPLACEMENT FOR @@@@@239-9957@@@@@
AN ATTACHMENT

500-3087 SENSOR GP-COOLANT LEVEL

500-3087 SENSOR GP-COOLANT LEVEL
PART OF 204-2518 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT

109-4367 SENSOR GP-EXHAUST TEMPERATURE

109-4367 SENSOR GP-EXHAUST TEMPERATURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
AN ATTACHMENT

204-2518 SENSOR GP-LIQUID LEVEL

204-2518 SENSOR GP-LIQUID LEVEL
PART OF 121-3356, 121-3362, 121-3364, 129-2244 SENSOR & MTG GP-RADIATOR
FIELD REPLACEMENT ORDER @@@@@500-3087@@@@@
AN ATTACHMENT

239-9957 SENSOR GP-LIQUID LEVEL

239-9957 SENSOR GP-LIQUID LEVEL
COOLANT LOSS
FIELD REPLACEMENT ORDER @@@@@430-9449@@@@@
FIELD REPLACEMENT FOR @@@@@165-6634@@@@@, @@@@@111-3794@@@@@
AN ATTACHMENT

143-9694 SENSOR GP-PRESSURE

143-9694 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
AN ATTACHMENT

143-9695 SENSOR GP-PRESSURE

143-9695 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
AN ATTACHMENT

143-9696 SENSOR GP-PRESSURE

143-9696 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
AN ATTACHMENT

161-9926 SENSOR GP-PRESSURE

161-9926 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
OPTIONAL FIELD REPLACEMENT ORDER 350-0664 SENSOR GP-PRESSURE, 249-5293 HARNESS AS-SENSOR
AN ATTACHMENT

194-6724 SENSOR GP-PRESSURE

194-6724 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
OPTIONAL FIELD REPLACEMENT ORDER @@@@@249-5293@@@@@, 276-6793 SENSOR GP-PRESSURE
AN ATTACHMENT

194-6725 SENSOR GP-PRESSURE

194-6725 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
AN ATTACHMENT

129-6628 SENSOR GP-SPEED

129-6628 SENSOR GP-SPEED
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
FIELD REPLACEMENT ORDER @@@@@273-5041@@@@@, @@@@@273-5041@@@@@
AN ATTACHMENT

189-5746 SENSOR GP-SPEED

189-5746 SENSOR GP-SPEED
PART OF 132-8270 WIRING GP-ENGINE
FIELD REPLACEMENT ORDER @@@@@318-1181@@@@@
AN ATTACHMENT

273-5041 SENSOR GP-SPEED

273-5041 SENSOR GP-SPEED
FIELD REPLACEMENT FOR @@@@@129-6628@@@@@
FOR USE WITH FIELD REPLACEMENT OF 129-6628 ON THE FOLLOWING ENGINES ONLY, 3508, 3512, 3508B, 3512B, 3516B, & 3524B

318-1181 SENSOR GP-SPEED

318-1181 SENSOR GP-SPEED
MAGNETIC, LOW OUTPUT
FIELD REPLACEMENT FOR @@@@@189-5746@@@@@

102-2240 SENSOR GP-TEMPERATURE

102-2240 SENSOR GP-TEMPERATURE
PART OF 163-1462 SENSOR & MTG GP-ELECTRIC
AN ATTACHMENT

SHUTOFF GP

113-1324 SHUTOFF GP-AIR

113-1324 SHUTOFF GP-AIR
Type 1
AN ATTACHMENT

113-1324 SHUTOFF GP-AIR

113-1324 SHUTOFF GP-AIR
Type 2
AN ATTACHMENT

135-0180 SHUTOFF GP-AIR

135-0180 SHUTOFF GP-AIR
PART OF 113-1324 SHUTOFF GP-AIR
AN ATTACHMENT

113-1325 SOLENOID GP-SHUTOFF

113-1325 SOLENOID GP-SHUTOFF -AIR
24-VOLT TO 32-VOLT DC
PART OF 113-1324 SHUTOFF GP-AIR
AN ATTACHMENT

141-6747 SOLENOID GP-SHUTOFF

141-6747 SOLENOID GP-SHUTOFF -AIR
24-VOLT TO 32-VOLT DC
PART OF 113-1324 SHUTOFF GP-AIR
AN ATTACHMENT

SOLENOID GP

113-1325 SOLENOID GP-SHUTOFF

113-1325 SOLENOID GP-SHUTOFF -AIR
24-VOLT TO 32-VOLT DC
PART OF 113-1324 SHUTOFF GP-AIR
AN ATTACHMENT

141-6747 SOLENOID GP-SHUTOFF

141-6747 SOLENOID GP-SHUTOFF -AIR
24-VOLT TO 32-VOLT DC
PART OF 113-1324 SHUTOFF GP-AIR
AN ATTACHMENT

5N-8980 VALVE AS-SOLENOID

5N-8980 VALVE AS-SOLENOID -AIR START
24/32-VOLT
PART OF 7C-5104 STARTING MOTOR GP-AIR
AN ATTACHMENT

STARTING AID GP

139-0596 STARTING AID GP-ETHER

139-0596 STARTING AID GP-ETHER
AN ATTACHMENT

STARTING MOTOR GP

119-6282 LUBRICATOR GP-AIR MOTOR

119-6282 LUBRICATOR GP-AIR MOTOR
PART OF 119-6284 LUBRICATOR GP-AIR MOTOR
FIELD REPLACEMENT ORDER @@@@@119-6284@@@@@
AN ATTACHMENT

119-6283 LUBRICATOR GP-AIR MOTOR

119-6283 LUBRICATOR GP-AIR MOTOR
PART OF 119-6284 LUBRICATOR GP-AIR MOTOR
FIELD REPLACEMENT ORDER @@@@@119-6284@@@@@
AN ATTACHMENT

119-6284 LUBRICATOR GP-AIR MOTOR

119-6284 LUBRICATOR GP-AIR MOTOR
PART OF 7C-2971, 7C-4167, 7C-5104 STARTING MOTOR GP-AIR
FIELD REPLACEMENT FOR @@@@@119-6282@@@@@, @@@@@119-6283@@@@@
AN ATTACHMENT AND FIELD INSTALLATION

3T-9525 PLATE AS-BRUSH

3T-9525 PLATE AS-BRUSH
PART OF 352-9766, 6V-0927 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

7W-9476 REGULATOR GP-AIR PRESSURE

7W-9476 REGULATOR GP-AIR PRESSURE
FOR USE WITH AIR STARING MOTORS
AN ATTACHMENT

4W-5107 STARTING MOTOR GP-AIR

4W-5107 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@
FIELD REPLACEMENT FOR @@@@@ 4W-5732@@@@@
FIELD INSTALLATION

4W-5732 STARTING MOTOR GP-AIR

4W-5732 STARTING MOTOR GP-AIR -LH
PART OF 7C-2971, 7C-4167, 7C-5104 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 4W-5107@@@@@, @@@@@ 7C-3372@@@@@
AN ATTACHMENT

7C-2971 STARTING MOTOR GP-AIR

7C-2971 STARTING MOTOR GP-AIR
LH MOUNTED - MANUAL CONTROL
CANNOT BE USED WITH HYDRA-MECHANICAL SHUTOFF
AN ATTACHMENT

7C-3372 STARTING MOTOR GP-AIR

7C-3372 STARTING MOTOR GP-AIR
FIELD REPLACEMENT FOR @@@@@ 4W-5732@@@@@, @@@@@ 4W-5107@@@@@

7C-4167 STARTING MOTOR GP-AIR

7C-4167 STARTING MOTOR GP-AIR
115 VOLT CONTROL. LH MOUNTED
CANNOT BE USED WITH HYDRA-MECHANICAL SHUTOFF
AN ATTACHMENT

7C-5104 STARTING MOTOR GP-AIR

7C-5104 STARTING MOTOR GP-AIR
24-32 VOLT CONTROL. LH MOUNTED
Type 1
CANNOT BE USED WITH HYDRA-MECHANICAL SHUTOFF
AN ATTACHMENT

7C-5104 STARTING MOTOR GP-AIR

7C-5104 STARTING MOTOR GP-AIR
24-32 VOLT CONTROL. LH MOUNTED
Type 2
CANNOT BE USED WITH HYDRA-MECHANICAL SHUTOFF
AN ATTACHMENT

106-8551 STARTING MOTOR GP-ELECTRIC

106-8551 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 6V-4246 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
AN ATTACHMENT

106-8554 STARTING MOTOR GP-ELECTRIC

106-8554 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
24-VOLT
Type 1

237-1962 STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
24-VOLT
Type 2

352-9766 STARTING MOTOR GP-ELECTRIC

352-9766 STARTING MOTOR GP-ELECTRIC
24-VOLT

6V-0890 STARTING MOTOR GP-ELECTRIC

6V-0890 STARTING MOTOR GP-ELECTRIC
24-VOLT
FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
FIELD REPLACEMENT FOR @@@@@ 6V-0927@@@@@
FIELD INSTALLATION

6V-0927 STARTING MOTOR GP-ELECTRIC

6V-0927 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 8N-3896 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

6V-4246 STARTING MOTOR GP-ELECTRIC

6V-4246 STARTING MOTOR GP-ELECTRIC
S/N 3NS1-245
PART OF 7C-0527 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
AN ATTACHMENT

6V-4320 STARTING MOTOR GP-ELECTRIC

6V-4320 STARTING MOTOR GP-ELECTRIC
PART OF 6V-4246 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
AN ATTACHMENT

6V-5539 STARTING MOTOR GP-ELECTRIC

6V-5539 STARTING MOTOR GP-ELECTRIC
24-VOLT
FIELD REPLACEMENT FOR @@@@@ 6V-4246@@@@@, @@@@@ 6V-4320@@@@@, @@@@@106-8551@@@@@, @@@@@ 6V-5540@@@@@

6V-5540 STARTING MOTOR GP-ELECTRIC

6V-5540 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@

6V-5582 STARTING MOTOR GP-ELECTRIC

6V-5582 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC

7C-0527 STARTING MOTOR GP-ELECTRIC

7C-0527 STARTING MOTOR GP-ELECTRIC -DUAL
S/N 3NS1-245
24-VOLT
AN ATTACHMENT

8N-3896 STARTING MOTOR GP-ELECTRIC

8N-3896 STARTING MOTOR GP-ELECTRIC -DUAL
24-VOLT
AN ATTACHMENT

1L-2073 VALVE GP-PRESSURE REDUCING

1L-2073 VALVE GP-PRESSURE REDUCING -RH
AIR CONTROL
PART OF 7W-9476 REGULATOR GP-AIR PRESSURE
AN ATTACHMENT

SWITCH GP

8N-0694 SWITCH AS-TOGGLE

8N-0694 SWITCH AS-TOGGLE
PART OF 125-9748 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT

123-2993 SWITCH GP-LIQUID LEVEL

123-2993 SWITCH GP-LIQUID LEVEL
FIELD REPLACEMENT ORDER @@@@@172-8660@@@@@
FOR USE WITH DRY CIRCUIT APPLICATIONS
AN ATTACHMENT

172-8660 SWITCH GP-LIQUID LEVEL

172-8660 SWITCH GP-LIQUID LEVEL
FIELD REPLACEMENT FOR @@@@@123-2993@@@@@
FOR USE WITH DRY CIRCUIT APPLICATIONS ONLY

4W-4755 SWITCH GP-MAGNETIC

4W-4755 SWITCH GP-MAGNETIC
FOR USE WITH DUAL 24-VOLT ELECTRIC STARTING MOTOR
AN ATTACHMENT

7N-8001 SWITCH GP-TOGGLE

7N-8001 SWITCH GP-TOGGLE
S/N 3NS1-245
PART OF 125-9748 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT

TRANSFORMER GP

206-0240 TRANSFORMER GP-CURRENT

206-0240 TRANSFORMER GP-CURRENT
5000:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0241 TRANSFORMER GP-CURRENT

206-0241 TRANSFORMER GP-CURRENT
1500:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0242 TRANSFORMER GP-CURRENT

206-0242 TRANSFORMER GP-CURRENT
2000:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0243 TRANSFORMER GP-CURRENT

206-0243 TRANSFORMER GP-CURRENT
2500:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0244 TRANSFORMER GP-CURRENT

206-0244 TRANSFORMER GP-CURRENT
3000:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0245 TRANSFORMER GP-CURRENT

206-0245 TRANSFORMER GP-CURRENT
4000:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0246 TRANSFORMER GP-CURRENT

206-0246 TRANSFORMER GP-CURRENT
3500:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0247 TRANSFORMER GP-CURRENT

206-0247 TRANSFORMER GP-CURRENT
200:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0248 TRANSFORMER GP-CURRENT

206-0248 TRANSFORMER GP-CURRENT
300:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0249 TRANSFORMER GP-CURRENT

206-0249 TRANSFORMER GP-CURRENT
400:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0250 TRANSFORMER GP-CURRENT

206-0250 TRANSFORMER GP-CURRENT
600:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

206-0251 TRANSFORMER GP-CURRENT

206-0251 TRANSFORMER GP-CURRENT
800:5 RATIO
FOR USE WITH EMCP II+
AN ATTACHMENT

229-5837 TRANSFORMER GP-CURRENT

229-5837 TRANSFORMER GP-CURRENT
1000:5 RATIO
AN ATTACHMENT

229-5838 TRANSFORMER GP-CURRENT

229-5838 TRANSFORMER GP-CURRENT
1200:5 RATIO
AN ATTACHMENT

175-7748 TRANSFORMER GP-POTENTIAL

175-7748 TRANSFORMER GP-POTENTIAL
PART OF 158-6169 CONVERSION AR-GENERATOR SET
AN ATTACHMENT

VALVE GP

4W-5424 VALVE GP-AIR CONTROL

4W-5424 VALVE GP-AIR CONTROL
PART OF 7C-2971 STARTING MOTOR GP-AIR
AN ATTACHMENT

5N-8980 VALVE AS-SOLENOID

5N-8980 VALVE AS-SOLENOID -AIR START
24/32-VOLT
PART OF 7C-5104 STARTING MOTOR GP-AIR
AN ATTACHMENT

1L-2073 VALVE GP-PRESSURE REDUCING

1L-2073 VALVE GP-PRESSURE REDUCING -RH
AIR CONTROL
PART OF 7W-9476 REGULATOR GP-AIR PRESSURE
AN ATTACHMENT

WIRING GP

115-5163 ENCLOSURE GP-WIRING

115-5163 ENCLOSURE GP-WIRING
PART OF 115-5164 BOX & MOUNTING GP
Type 1
AN ATTACHMENT

115-5163 ENCLOSURE GP-WIRING

115-5163 ENCLOSURE GP-WIRING
PART OF 115-5164 BOX & MOUNTING GP
Type 2
AN ATTACHMENT

120-4489 HARNESS GP-WIRING

120-4489 HARNESS GP-WIRING -SPEED CONTROL
AN ATTACHMENT

134-6321 HARNESS GP-WIRING

134-6321 HARNESS GP-WIRING -DENOX AFTERTREATMENT
AN ATTACHMENT

143-9694 SENSOR GP-PRESSURE

143-9694 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
AN ATTACHMENT

143-9695 SENSOR GP-PRESSURE

143-9695 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
AN ATTACHMENT

143-9696 SENSOR GP-PRESSURE

143-9696 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
AN ATTACHMENT

161-9926 SENSOR GP-PRESSURE

161-9926 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
OPTIONAL FIELD REPLACEMENT ORDER 350-0664 SENSOR GP-PRESSURE, 249-5293 HARNESS AS-SENSOR
AN ATTACHMENT

194-6724 SENSOR GP-PRESSURE

194-6724 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
OPTIONAL FIELD REPLACEMENT ORDER @@@@@249-5293@@@@@, 276-6793 SENSOR GP-PRESSURE
AN ATTACHMENT

194-6725 SENSOR GP-PRESSURE

194-6725 SENSOR GP-PRESSURE
PART OF 131-4346, 132-8270 WIRING GP-ENGINE
AN ATTACHMENT

133-6468 WIRE AS-GROUND

133-6468 WIRE AS-GROUND
FOR USE WITH 35-AMPERE ALTERNATOR
AN ATTACHMENT

131-4346 WIRING GP-ENGINE

131-4346 WIRING GP-ENGINE
S/N 3NS1-226
AN ATTACHMENT

131-4346 WIRING GP-ENGINE

131-4346 WIRING GP-ENGINE
S/N 3NS227-UP
AN ATTACHMENT

132-8270 WIRING GP-ENGINE

132-8270 WIRING GP-ENGINE
S/N 3NS1-226
AN ATTACHMENT

132-8270 WIRING GP-ENGINE

132-8270 WIRING GP-ENGINE
S/N 3NS227-UP
AN ATTACHMENT

136-5924 WIRING GP-ENGINE

136-5924 WIRING GP-ENGINE
FOR USE WITH JWAC
AN ATTACHMENT

150-4494 WIRING GP-ENGINE

150-4494 WIRING GP-ENGINE -SHUTDOWN NOTIFY
FIELD INSTALLATION

120-4486 WIRING GP-PANEL

120-4486 WIRING GP-PANEL -AIR SHUTOFF
AN ATTACHMENT

120-4487 WIRING GP-PANEL

120-4487 WIRING GP-PANEL -ALTERNATOR CIRCUIT BREAKER
AN ATTACHMENT

134-6313 WIRING GP-PANEL

134-6313 WIRING GP-PANEL -PRELUBRICATION
AN ATTACHMENT

134-6315 WIRING GP-PANEL

134-6315 WIRING GP-PANEL -AIR SHUTOFF
AN ATTACHMENT

134-6317 WIRING GP-PANEL

134-6317 WIRING GP-PANEL -ALTERNATOR
AN ATTACHMENT

134-6319 WIRING GP-PANEL

134-6319 WIRING GP-PANEL -STARTING AID
AN ATTACHMENT

134-6323 WIRING GP-PANEL

134-6323 WIRING GP-PANEL -SPEED CONTROL
AN ATTACHMENT

CONNECTION GP

121-8856 CONNECTION GP-ELECTRICAL

121-8856 CONNECTION GP-ELECTRICAL
S/N 3NS1-222
AN ATTACHMENT

121-8856 CONNECTION GP-ELECTRICAL

121-8856 CONNECTION GP-ELECTRICAL
S/N 3NS223-UP
AN ATTACHMENT

141-4099 CONNECTION GP-INTERFACE

141-4099 CONNECTION GP-INTERFACE
SYSTEMS COMMUNICATION, INTERFACE FOR ADEM/CCM/DVR/SLC500 PLC
AN ATTACHMENT

141-4100 CONNECTION GP-INTERFACE

141-4100 CONNECTION GP-INTERFACE
SYSTEMS COMMUNICATION, INTERFACE FOR ADEM/CCM/DVR/S5 PLC
AN ATTACHMENT

141-4101 CONNECTION GP-INTERFACE

141-4101 CONNECTION GP-INTERFACE
SYSTEMS COMMUNICATION, INTERFACE FOR ADEM/CCM/DVR/SNP PLC
AN ATTACHMENT

145-0191 CONNECTION GP-INTERFACE

145-0191 CONNECTION GP-INTERFACE
SYSTEMS COMMUNICATION, INTERFACE FOR EMCPII+/CCM/DVR
AN ATTACHMENT

145-0192 CONNECTION GP-INTERFACE

145-0192 CONNECTION GP-INTERFACE
SYSTEMS COMMUNICATION, INTERFACE FOR ADEM/CCM/DVR
AN ATTACHMENT

126-9191 GROUND GP-ELECTRICAL

126-9191 GROUND GP-ELECTRICAL -ALTERNATOR
AN ATTACHMENT

RELAY GP

158-6181 RELAY GP

158-6181 RELAY GP
24 VOLT DC. 3-POLE
PART OF 158-6167, 158-6169 CONVERSION AR-GENERATOR SET
AN ATTACHMENT

174-1439 RELAY GP

174-1439 RELAY GP -EMERGENCY STOP
FIELD INSTALLATION

175-5042 RELAY GP

175-5042 RELAY GP -EMERGENCY STOP
FOR USE WITH PREMIUM HARNESS
FIELD INSTALLATION

ELECTRONICS GP-MONITOR

115-4636 CONTROL GP-ENGINE MONITORING

115-4636 CONTROL GP-ENGINE MONITORING
PART OF 125-9748 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT

144-1623 CONTROL GP-ENGINE MONITORING

144-1623 CONTROL GP-ENGINE MONITORING -PROGRAMMABLE RELAY
PART OF 144-1624 CONTROL GP-ENGINE MONITORING
AN ATTACHMENT

144-1624 CONTROL GP-ENGINE MONITORING

144-1624 CONTROL GP-ENGINE MONITORING -PROGRAMMABLE RELAY CONTROL MODULE
PART OF 133-9300 CONTROL GP-ENGINE ELECTRONIC
AN ATTACHMENT

158-6255 CONTROL GP-ENGINE MONITORING

158-6255 CONTROL GP-ENGINE MONITORING
S/N 3NS220-UP
EMSII
PART OF 125-9748 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT

HEATER GP

200-6504 HEATER GP-JACKET WATER

200-6504 HEATER GP-JACKET WATER
240-VOLT TO 480-VOLT AC, 6-KILOWATT
FIELD REPLACEMENT FOR @@@@@ 7E-6248@@@@@
AN ATTACHMENT

7E-6247 HEATER GP-JACKET WATER

7E-6247 HEATER GP-JACKET WATER
120-VOLT TO 240-VOLT. 3-KILOWATT
AN ATTACHMENT

7E-6248 HEATER GP-JACKET WATER

7E-6248 HEATER GP-JACKET WATER
240-VOLT TO 480-VOLT. 6-KILOWATT
Type 1
FIELD REPLACEMENT ORDER @@@@@200-6504@@@@@
AN ATTACHMENT

7E-6248 HEATER GP-JACKET WATER

7E-6248 HEATER GP-JACKET WATER
240-VOLT TO 480-VOLT. 6-KILOWATT
Type 2
FIELD REPLACEMENT ORDER @@@@@200-6504@@@@@
AN ATTACHMENT

134-3159 MOUNTING GP-JACKET WTR HEATER

134-3159 MOUNTING GP-JACKET WTR HEATER -RH
S/N 3NS1-245
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP OR RH PRELUBRICATION CONVERSION
AN ATTACHMENT

134-3159 MOUNTING GP-JACKET WTR HEATER

134-3159 MOUNTING GP-JACKET WTR HEATER -RH
S/N 3NS246-UP
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP OR RH PRELUBRICATION CONVERSION
AN ATTACHMENT

134-3160 MOUNTING GP-JACKET WTR HEATER

134-3160 MOUNTING GP-JACKET WTR HEATER -LH
Type 1
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP OR RH PRELUBRICATION CONVERSION
AN ATTACHMENT

134-3160 MOUNTING GP-JACKET WTR HEATER

134-3160 MOUNTING GP-JACKET WTR HEATER -LH
Type 2
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP OR RH PRELUBRICATION CONVERSION
AN ATTACHMENT

166-6652 MOUNTING GP-JACKET WTR HEATER

166-6652 MOUNTING GP-JACKET WTR HEATER -RH
S/N 3NS1-245
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP, OR RH PRELUBRICATION CONVERSION
AN ATTACHMENT

166-6652 MOUNTING GP-JACKET WTR HEATER

166-6652 MOUNTING GP-JACKET WTR HEATER -RH
S/N 3NS246-UP
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP, OR RH PRELUBRICATION CONVERSION
AN ATTACHMENT

258-8950 MOUNTING GP-JACKET WTR HEATER

258-8950 MOUNTING GP-JACKET WTR HEATER -RH
AN ATTACHMENT

258-8951 MOUNTING GP-JACKET WTR HEATER

258-8951 MOUNTING GP-JACKET WTR HEATER -LH
AN ATTACHMENT

6I-1043 MOUNTING GP-JACKET WTR HEATER

6I-1043 MOUNTING GP-JACKET WTR HEATER -LH
CANNOT BE USED WITH HEAVY DUTY AIR CLEANERS WITH PRECLEANERS, LH AIR COMPRESSOR
AN ATTACHMENT

6I-1044 MOUNTING GP-JACKET WTR HEATER

6I-1044 MOUNTING GP-JACKET WTR HEATER -RH
Type 1
FOR USE WITH LH SUMP PUMP, LH PRELUBE
CANNOT BE USED WITH HEAVY DUTY AIR CLEANERS WITH PRECLEANERS, LEDGE TYPE RAILS, RH SUMP PUMP, RH PRELUBE
AN ATTACHMENT

6I-1044 MOUNTING GP-JACKET WTR HEATER

6I-1044 MOUNTING GP-JACKET WTR HEATER -RH
Type 2
FOR USE WITH LH SUMP PUMP, LH PRELUBE
CANNOT BE USED WITH HEAVY DUTY AIR CLEANERS WITH PRECLEANERS, LEDGE TYPE RAILS, RH SUMP PUMP, RH PRELUBE
AN ATTACHMENT

HARNESS GP

145-4387 HARNESS AS-BOX

145-4387 HARNESS AS-BOX
FOR USE WITH EMCP II WITH SWITCHGEAR
AN ATTACHMENT

126-3085 HARNESS AS-ENGINE

126-3085 HARNESS AS-ENGINE -GOVERNOR
AN ATTACHMENT

126-3084 HARNESS AS-PANEL

126-3084 HARNESS AS-PANEL -TERMINAL BLOCK
PART OF 121-4450 PANEL GP-CONTROL
AN ATTACHMENT

126-3087 HARNESS AS-PANEL

126-3087 HARNESS AS-PANEL -AC CONNECTIONS
PART OF 121-4450 PANEL GP-CONTROL
AN ATTACHMENT

126-3092 HARNESS AS-PANEL

126-3092 HARNESS AS-PANEL -GOVERNOR
PART OF 121-4450 PANEL GP-CONTROL
AN ATTACHMENT

126-3094 HARNESS AS-PANEL

126-3094 HARNESS AS-PANEL -GOVERNOR
AN ATTACHMENT

126-3097 HARNESS AS-PANEL

126-3097 HARNESS AS-PANEL -RELAY 2
FOR USE WITH EMCP II
AN ATTACHMENT

126-3105 HARNESS AS-PANEL

126-3105 HARNESS AS-PANEL -SLAVE RELAY
AN ATTACHMENT

141-0716 HARNESS AS-PANEL

141-0716 HARNESS AS-PANEL -INTERCONNECT
10-FT LENGTH
FOR USE WITH SWITCHGEAR CONVERSION
AN ATTACHMENT

141-0717 HARNESS AS-PANEL

141-0717 HARNESS AS-PANEL -INTERCONNECT
25-FT LENGTH
FOR USE WITH SWITCHGEAR CONVERSION
AN ATTACHMENT

141-0719 HARNESS AS-PANEL

141-0719 HARNESS AS-PANEL -INTERCONNECT
50-FT EXTENSION
FOR USE WITH SWITCHGEAR CONVERSION
AN ATTACHMENT

141-0720 HARNESS AS-PANEL

141-0720 HARNESS AS-PANEL -INTERCONNECT
100-FT EXTENSION
FOR USE WITH SWITCHGEAR CONVERSION
AN ATTACHMENT

143-5176 HARNESS AS-PANEL

143-5176 HARNESS AS-PANEL -INTERCONNECT
S/N 3NS1-237
PART OF 125-9748 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT

172-7666 HARNESS AS-PANEL

172-7666 HARNESS AS-PANEL -GENERATOR SET CONTROL
PART OF 121-4450 PANEL GP-CONTROL
AN ATTACHMENT

172-7667 HARNESS AS-PANEL

172-7667 HARNESS AS-PANEL -INTERNAL COMPONENTS
PART OF 121-4450 PANEL GP-CONTROL
AN ATTACHMENT

172-7668 HARNESS AS-PANEL

172-7668 HARNESS AS-PANEL -GENERATOR TERMINAL STRIP
PART OF 121-4450 PANEL GP-CONTROL
AN ATTACHMENT

174-1436 HARNESS AS-PANEL

174-1436 HARNESS AS-PANEL -INSTRUMENT
S/N 3NS238-UP
PART OF 125-9748 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT

282-0917 HARNESS AS-PANEL

282-0917 HARNESS AS-PANEL -PRODUCT LINK
FIELD INSTALLATION

121-3365 HARNESS AS-SENSOR

121-3365 HARNESS AS-SENSOR -COOLANT LEVEL
S/N 3NS246-UP
PART OF 121-3364 SENSOR & MTG GP-RADIATOR
AN ATTACHMENT

249-5293 HARNESS AS-SENSOR

249-5293 HARNESS AS-SENSOR
FIELD REPLACEMENT FOR @@@@@194-6724@@@@@

132-6469 HARNESS AS-WIRING

132-6469 HARNESS AS-WIRING -VALVE MECHANISM
S/N 3NS246-UP
PART OF 370-9889 VALVE MECHANISM GP
PART OF 7E-5314 VALVE MECHANISM GP

Information:

(For parts list, see above)

ELECTRICAL AND STARTING SYSTEM

THERMOCOUPLE GP

Special Instruction

Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}

ALARM GP

Operation and Maintenance Manual

Alarms and Shutoffs
3500 and 3500B Engines

Monitoring System
3500 and 3500B Engines

Testing and Adjusting

CID 0271 FMI 03 Alarm (Action) Voltage Above Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0271 FMI 05 Alarm (Action) Current Below Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0271 FMI 06 Alarm (Action) Current Above Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

ALTERNATOR GP-CHARGING

Engine News

A New Seal Is Used In The Alternator Mounting Group {1405}
2000/11/01

Repair Parts Available for Alternator R-Terminal {1405}
2000/12/01

Harness Repair of Alternator R-Terminal Connector {1405}
2000/12/01

Improved Alternator Adjusting Rod {1405}
2005/03/07

Improved Design for the Alternator Guard Assembly {7168}
2005/05/30

Recommendations for Battery Charging for Genset Usage {1401, 1406}
2015/04/03

Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}

Operation and Maintenance Manual

Alternator - Inspect
3500 and 3500B Engines

Special Instruction

Generator Set Start-up Checklist{1021, 1404, 7002}
Generator Set Start-up Checklist{1021, 1404, 7002}

Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}

Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}

Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}

Specifications

Alternator and Regulator
3500 Engines with EUI Option

Alternator
30SI Series and 34SI Series Alternator

Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators

Alternator
N3 Series Brushless Alternators

Alternator and Regulator
3500 Engines with EUI Option

Alternator Mounting
3500 Engines with EUI Option

Systems Operation

General Information
30SI Series and 34SI Series Alternator

Normal Operation
30SI Series and 34SI Series Alternator

Component Description
30SI Series and 34SI Series Alternator

Alternator
3500 Engines with EUI Option

General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators

Normal Operation
HDB Series and M1 Series Heavy Duty Brushless Alternators

Component Description
HDB Series and M1 Series Heavy Duty Brushless Alternators

General Information
N3 Series Brushless Alternators

Component Description
N3 Series Brushless Alternators

Normal Operation
N3 Series Brushless Alternators

Testing and Adjusting

T1 Alternator Output - Test
30SI Series and 34SI Series Alternator

T2 Electrical System Current - Test
30SI Series and 34SI Series Alternator

T3 Charging System - Test
30SI Series and 34SI Series Alternator

T4 Alternator Drive System - Check
30SI Series and 34SI Series Alternator

T5 Alternator Current - Test
30SI Series and 34SI Series Alternator

T6 Residual Magnetism Restoration
30SI Series and 34SI Series Alternator

T7 Identifying Source of Current Draw - Test
30SI Series and 34SI Series Alternator

T8 Alternator Overcharging - Test
30SI Series and 34SI Series Alternator

General Information
30SI Series and 34SI Series Alternator

Initial Troubleshooting Procedure
30SI Series and 34SI Series Alternator

Component - Test
30SI Series and 34SI Series Alternator

Alternator Regulator
3500 Engines with EUI Option

Charging System
3500 Engines with EUI Option

Field Winding - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators

Capacitor - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators

Stator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators

Rectifier - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators

Residual Magnetism - Restore
HDB Series and M1 Series Heavy Duty Brushless Alternators

Regulator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators

Field Winding - Test
N3 Series Brushless Alternators

Capacitor - Test
N3 Series Brushless Alternators

Rectifier - Test
N3 Series Brushless Alternators

Stator - Test
N3 Series Brushless Alternators

Regulator - Test
N3 Series Brushless Alternators

Troubleshooting

Alternator
3500B Engines and 3500 Engines with EUI Option

General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators

Charging System
HDB Series and M1 Series Heavy Duty Brushless Alternators

Disassembly and Assembly

Alternator - Disassemble
30SI Series and 34SI Series Alternator

Alternator - Assemble
30SI Series and 34SI Series Alternator

Alternator - Disassemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators

Alternator - Assemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators

Alternator - Assemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators

Alternator - Disassemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators

Alternator - Assemble
N3 Series Brushless Alternators

Alternator - Disassemble
N3 Series Brushless Alternators

Service Magazine

Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02

Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02

Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/01

Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

BATTERY GP

Engine News

Recommendations for Battery Charging for Genset Usage {1401, 1406}
2015/04/03

New Procedure For Disconnecting The Battery Cables On Generator Sets {1401, 1402, 751B}
2009/10/23

Operation and Maintenance Manual

Battery Electrolyte Level - Check
3500 and 3500B Engines

Starting with Jump Start Cables
3500 and 3500B Engines

Battery - Recycle
3500 and 3500B Engines

Battery Charger - Check
3500 and 3500B Engines

Batteries - Replace
3500 and 3500B Engines

Cold Weather Starting
3500 and 3500B Engines

Battery Disconnect Switch - If Equipped
3500 and 3500B Engines

Special Instruction

Battery Test Procedure {1401}
Battery Test Procedure {1401}

Tool Operating Manual

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

Testing and Adjusting

Charging System - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

CID 168 FMI 3 Electrical System Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

CID 168 FMI 4 Electrical System Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

Charging System - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 168 FMI 4 Electrical System Voltage Below Normal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 168 FMI 3 Electrical System Voltage Above Normal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Battery
3500 Engines with EUI Option

Troubleshooting

Electrical Power Supply
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0168 - FMI 00 System Voltage High
3500B Engines and 3500 Engines with EUI Option

Service Magazine

Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09

CIRCUIT BREAKER GP

Engine News

Obsolete Merlin Gerin CK and CM Frame Circuit Breaker Replacements Are Now Available {1420, 4461}
2012/06/25

Systems Operation

Circuit Breaker
3500 Engines with EUI Option

CONTROL GP-ELECTRONIC

Engine News

New Electronic Control Module (ECM){1901,1900,1920}
1998/04/01

Real Time Clock is no Longer Supported {1901}
Real Time Clock is no Longer Supported {1901}

Special Instruction

Emergency Stop Indication on EMCPII with an ADEM II, ADEM III, or ADEM IV Electronic Control Module (ECM){1900, 1901}
Emergency Stop Indication on EMCPII with an ADEM II, ADEM III, or ADEM IV Electronic Control Module (ECM){1900, 1901}

Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQ^TM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}

Service Magazine

Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09

ELECTRONICS GP-ENGINE

Engine News

New Software For Customer Communications Module (CCM){1920,1926}
1997/03/01

Software Serviceability{1902}
1997/07/01

New Electronic Control Module (ECM){1901,1900,1920}
1998/04/01

Be Sure To Verify The Rated Fuel Position Parameter After Flashing 3500 Commercial Engines{1902}
1998/05/01

New Software Helps Eliminate False Warnings And Error Codes {1920,1902}
1999/11/01

New Electronic Control Module (ECM) Provides Improved Reliability {1901}
2000/02/01

Caterpillar Electronic Control Modules and Computer Viruses {1901, 7620}
2000/11/01

Electronic Control Modules and Computer Viruses {7620}
2001/06/01

New Software Is Available For The Engines That Follow {7620}
2001/06/01

Additional Troubleshooting Procedures For Speed Burps {1901, 1913}
2001/08/01

New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01

Finding the Latest Flash Files {7620}
2009/10/01

New Engine Monitoring System III Software Is Used on Certain 3500 Generator Set Engines {1901, 1920}
2013/10/17

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Engine Protective Devices - Check
3500 and 3500B Engines

Cold Weather Starting
3500 and 3500B Engines

Instrument Panel
3500 and 3500B Engines

Programmable System Parameters
3500 and 3500B Engines

Gauges and Indicators
3500 and 3500B Engines

Monitoring System
3500 and 3500B Engines

Special Instruction

Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}

Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}

Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}

Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar^® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}

Service Letter-NACD

Product Support Program For Flashing New ECM Software On Certain 3508, 3512, And 3516 With EUI Option; And Certain 3508B, 3512B, And 3516B EPG And Marine Auxiliary Engines
Product Support Program For Flashing New ECM Software On Certain 3508, 3512, And 3516 With EUI Option; And Certain 3508B, 3512B, And 3516B EPG And Marine Auxiliary Engines

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Truck/Ag/Marine

Service Letter-China

Service Letter-Asia

Systems Operation

Electronic Control Module (ECM)
3500 Engines with EUI Option

Electronic Control System Components
3500 Engines with EUI Option

Cold Cylinder Cutout
3500 Engines with EUI Option

Electronic Control Module (Engine)
Electronic Modular Control Panel II (EMCP II) for EUI Engines

Electronic Control Module (Engine)
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Histogramming
3500 Engines with EUI Option

Cat Data Link
3500 Engines with EUI Option

Secondary Cat Data Link
3500 Engines with EUI Option

System Configuration Parameters
3500 Engines with EUI Option

100 Hour Free Configuration on Engine Start-up
3500 Engines with EUI Option

Fuel Rate Scaling (Fuel Correction Factor) - Diesel Fuel
3500 Engines with EUI Option

Electronic Circuits
3500 Engines with EUI Option

Engine Monitoring System
3500 Engines with EUI Option

ECM Total Fuel Consumption Adjustment - Diesel Fuel
3500 Engines with EUI Option

ECM Hour Increment Adjustment
3500 Engines with EUI Option

Electronic Control System Operation
3500 Engines with EUI Option

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Testing and Adjusting

CID 590 FMI 9 Engine Electronic Control Module Abnormal Update - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

CID 590 FMI 9 Engine Electronic Control Module Abnormal Update - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Checking and Calibrating Electronic Injection Timing with the Electronic Service Tool
3500 Engines with EUI Option

Calibration
3500 Engines with EUI Option

Monitoring System Parameters
3500 Engines with EUI Option

Configuration Parameters
3500 Engines with EUI Option

Troubleshooting

ECM Will Not Communicate with Other Systems or Display Modules
3500B Engines and 3500 Engines with EUI Option

Excessive White Smoke
3500B Engines and 3500 Engines with EUI Option

Too Much Vibration
3500B Engines and 3500 Engines with EUI Option

Too Much Valve Lash
3500B Engines and 3500 Engines with EUI Option

Engine Oil in Cooling System
3500B Engines and 3500 Engines with EUI Option

Fuel in Cooling System
3500B Engines and 3500 Engines with EUI Option

Oil Contains Coolant
3500B Engines and 3500 Engines with EUI Option

Low Engine Oil Pressure
3500B Engines and 3500 Engines with EUI Option

Coolant Temperature Is Too High
3500B Engines and 3500 Engines with EUI Option

Exhaust Temperature Is Too High
3500B Engines and 3500 Engines with EUI Option

E190 Engine Overspeed Warning
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0248 - FMI 09 Cat Data Link not communicating
3500B Engines and 3500 Engines with EUI Option

Self-Diagnostics
3500B Engines and 3500 Engines with EUI Option

Electronic Display Module
3500B Engines and 3500 Engines with EUI Option

System Configuration Parameters
3500B Engines and 3500 Engines with EUI Option

Customer Parameters Worksheet
3500B Engines and 3500 Engines with EUI Option

ECM/Personality Module
3500B Engines and 3500 Engines with EUI Option

System Overview
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0336 - FMI 02 Incorrect ECS Switch inputs
3500B Engines and 3500 Engines with EUI Option

Engine Monitoring System
3500B Engines and 3500 Engines with EUI Option

Speed Control
3500B Engines and 3500 Engines with EUI Option

Emergency Stop Switch
3500B Engines and 3500 Engines with EUI Option

Engine Control Switch (ECS)
3500B Engines and 3500 Engines with EUI Option

Analog Sensor Supply
3500B Engines and 3500 Engines with EUI Option

Cat Data Link
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0253 - FMI 02 Personality Module mismatch
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0254 - FMI 12 Electronic Control Module Error
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0094 - FMI 02 Fuel Pressure misinstalled
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0337 - FMI 02 Incorrect Remote E-Stop Switch inputs
3500B Engines and 3500 Engines with EUI Option

Starting Motor System
3500B Engines and 3500 Engines with EUI Option

Engine Misfires, Runs Rough or Is Unstable
3500B Engines and 3500 Engines with EUI Option

Poor Fuel Consumption
3500B Engines and 3500 Engines with EUI Option

Engine Stalls at Low RPM
3500B Engines and 3500 Engines with EUI Option

Noise Coming from Cylinder
3500B Engines and 3500 Engines with EUI Option

Mechanical Noise (Knock) in Engine
3500B Engines and 3500 Engines with EUI Option

Excessive Engine Oil Consumption
3500B Engines and 3500 Engines with EUI Option

Programming Parameters
3500B Engines and 3500 Engines with EUI Option

Factory Passwords Worksheet
3500B Engines and 3500 Engines with EUI Option

Direct Fuel Control Mode
3500B Engines and 3500 Engines with EUI Option

Intermittent Low Power or Power Cutout
3500B Engines and 3500 Engines with EUI Option

Low Power/Poor or No Response to Throttle
3500B Engines and 3500 Engines with EUI Option

Engine Cranks but Will Not Start
3500B Engines and 3500 Engines with EUI Option

Can Not Reach Top Engine RPM
3500B Engines and 3500 Engines with EUI Option

Engine Has Early Wear
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0094 - FMI 03 Fuel Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0094 - FMI 04 Fuel Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0094 - FMI 13 Fuel Pressure calibration required
3500B Engines and 3500 Engines with EUI Option

Electronic Service Tools
3500B Engines and 3500 Engines with EUI Option

Factory Passwords
3500B Engines and 3500 Engines with EUI Option

Excessive Black Smoke
3500B Engines and 3500 Engines with EUI Option

Fuel Dilution of Engine Oil
3500B Engines and 3500 Engines with EUI Option

Flash Programming
3500B Engines and 3500 Engines with EUI Option

Replacing the ECM
3500B Engines and 3500 Engines with EUI Option

Electronic Service Tool Will Not Communicate with ECM
3500B Engines and 3500 Engines with EUI Option

Intermittent Engine Shutdown
3500B Engines and 3500 Engines with EUI Option

PRCM CID 0590 - FMI 09
Programmable Relay Control Module (PRCM)

E017 High Engine Coolant Temperature Warning
3500B Engines and 3500 Engines with EUI Option

E272 Inlet Air Restriction Warning
3500B Engines and 3500 Engines with EUI Option

E100 Low Engine Oil Pressure Warning
3500B Engines and 3500 Engines with EUI Option

Engine Will Not Crank
3500B Engines and 3500 Engines with EUI Option

Diagnostic Codes
3500B Engines and 3500 Engines with EUI Option

Event Codes
3500B Engines and 3500 Engines with EUI Option

ECM Will Not Accept Factory Passwords
3500B Engines and 3500 Engines with EUI Option

Inspecting Electrical Connectors
3500B Engines and 3500 Engines with EUI Option

Symptoms
3500B Engines and 3500 Engines with EUI Option

Service Magazine

Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

ELECTRONICS GP-POWER TRAIN

Special Instruction

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

ELECTRONICS GP-IMPLEMENT

Special Instruction

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

ELECTRONICS GP-MACHINE

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Special Instruction

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

CONTROL GP-UNPROGRAMMED

Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09

CONVERTER GP-ELECTRICAL

Systems Operation

Electrical Converter (Pulse Width Modulated)
Electronic Modular Control Panel II (EMCP II) for EUI Engines

Electrical Converter (Pulse Width Modulated)
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

ELECTRONICS GP

Special Instruction

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat^® Products {1408}

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat^® Products {1400}

INDICATOR GP

Testing and Adjusting

Indicators for Engine Oil Pressure
3500 Engines with EUI Option

MISCELLANEOUS INFORMATION

Operation and Maintenance Manual

Engine Protective Devices - Check
3500 and 3500B Engines

Starting Motor - Inspect
3500 and 3500B Engines

Starting the Engine
3500 and 3500B Engines

Technical Information Bulletin

Loss Of The Desired Speed Signal During Earth Fault Test
Loss Of The Desired Speed Signal During Earth Fault Test

Systems Operation

Electrical System Operation
3500 Engines with EUI Option

Grounding Practices
3500 Engines with EUI Option

Service Magazine

Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09

MODULE GP-SYSTEM COMMUNICATION

Engine News

Improved Data Logger Feature For Customer Communication Module{1926}
1999/04/01

New Format of PC Software for Customer Communication Module {1926}
2000/05/01

Operation and Maintenance Manual

Battery - Replace
Customer Communication Module (CCM) for Diesel Engines

Communication Initialization
Customer Communication Module (CCM) for Diesel Engines

Communication Parameters - Identify
Customer Communication Module (CCM) for Diesel Engines

General Installation Requirements
Customer Communication Module (CCM) for Diesel Engines

Serial Number Location
Customer Communication Module (CCM) for Diesel Engines

Acronyms
Customer Communication Module (CCM) for Diesel Engines

General Wiring Diagram
Customer Communication Module (CCM) for Diesel Engines

Data Link Guidelines
Customer Communication Module (CCM) for Diesel Engines

Parameter Identifiers for EMCP II
Customer Communication Module (CCM) for Diesel Engines

Specifications
Customer Communication Module (CCM) for Diesel Engines

Model View Illustrations
Customer Communication Module (CCM) for Diesel Engines

General Operation
Customer Communication Module (CCM) for Diesel Engines

General Specifications for Wire and Cable
Customer Communication Module (CCM) for Diesel Engines

Communication Protocol for Customized Systems
Customer Communication Module (CCM) for Diesel Engines

Display Description
Customer Communication Module (CCM) for Diesel Engines

Engine Number - Program
Customer Communication Module (CCM) for Diesel Engines

Fault Identifiers
Customer Communication Module (CCM) for Diesel Engines

Instruction Identifiers
Customer Communication Module (CCM) for Diesel Engines

Parameter Identifiers for General Usage
Customer Communication Module (CCM) for Diesel Engines

Programming Examples for M5X Protocol
Customer Communication Module (CCM) for Diesel Engines

Reference Material
Customer Communication Module (CCM) for Diesel Engines

Password - Enable and Disable
Customer Communication Module (CCM) for Diesel Engines

Initialization for Direct Connection
Customer Communication Module (CCM) for Diesel Engines

Initialization for Remote Connection with Modem
Customer Communication Module (CCM) for Diesel Engines

Diagnostic Code - Troubleshoot
Customer Communication Module (CCM) for Diesel Engines

M5X Protocol - Troubleshoot
Customer Communication Module (CCM) for Diesel Engines

System - Troubleshoot
Customer Communication Module (CCM) for Diesel Engines

RS-232C Cable Requirements
Customer Communication Module (CCM) for Diesel Engines

REGULATOR GP-VOLTAGE

Engine News

Proper Termination Techniques May Increase VR3 Voltage Regulator Reliability {1410}
2003/10/01

Operation and Maintenance Manual

Voltage Regulators
SR4 HV and SR4B HV Generators

SENDER GP

Systems Operation

Senders
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Testing and Adjusting

CID 0172 FMI 04 Temperature Sender (Inlet Air) Voltage Below Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0175 FMI 04 Temperature Sender (Engine Oil) Voltage Below Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0175 FMI 08 Temperature Sender (Engine Oil) Abnormal Signal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Service Magazine

Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09

SENSOR GP

Engine News

New Electronic Control Module (ECM){1901,1900,1920}
1998/04/01

New Engine Pressure Sensors Available {1916,1917,1922,1923,1924}
1999/03/01

Additional Troubleshooting Procedures For Speed Burps {1901, 1913}
2001/08/01

Correction to Troubleshooting , "GSC CID 0190 - FMI 02" {1907}
2002/07/01

Coolant Sensor Installation Service Notes {5574}
2008/07/07

A New Speed-Timing Sensor is Available {1912}
2006/07/24

Operation and Maintenance Manual

Engine Protective Devices - Check
3500 and 3500B Engines

Magnetic Pickups - Clean/Inspect
3500 and 3500B Engines

Special Instruction

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar^® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}

Technical Information Bulletin

Loss Of The Desired Speed Signal During Earth Fault Test
Loss Of The Desired Speed Signal During Earth Fault Test

Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}

Specifications

Engine Speed/Timing Sensor
3500 Engines with EUI Option

Crankcase Pressure Sensor
3500 Engines with EUI Option

Turbocharger Outlet Pressure Sensor
3500 Engines with EUI Option

Engine Oil Pressure Sensor
3500 Engines with EUI Option

Atmospheric Pressure Sensor
3500 Engines with EUI Option

Aftercooler Coolant Temperature Sensor
3500 Engines with EUI Option

Fuel Pressure Sensor
3500 Engines with EUI Option

Engine Oil Pressure Sensor
3500 Engines with EUI Option

Engine Coolant Temperature Sensor
3500 Engines with EUI Option

Engine Speed Sensor
3500 Engines with EUI Option

Engine Speed/Timing Sensor
3500 Engines with EUI Option

Crankcase Pressure Sensor
3500 Engines with EUI Option

Fuel Pressure Sensor
3500 Engines with EUI Option

Atmospheric Pressure Sensor
3500 Engines with EUI Option

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Sensors
Electronic Modular Control Panel II (EMCP II) for EUI Engines

Sensors
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Sensors
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Engine Speed Sensor
3500 Engines with EUI Option

Testing and Adjusting

CID 100 FMI 2 Pressure Sensor (Engine Oil) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

Speed Sensor (Engine) - Adjust
Electronic Modular Control Panel II (EMCP II) for EUI Engines

CID 110 FMI 2 Temperature Sensor (Engine Coolant) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

CID 111 FMI 3 Fluid Level Sensor (Engine Coolant) Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

CID 190 FMI 2 Speed Sensor (Engine) Incorrect Signal - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

CID 190 FMI 3 Speed Sensor (Engine) Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

CID 269 FMI 3 Sensor Power Supply Voltage Above Normal - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

CID 269 FMI 4 Sensor Power Supply Voltage Below Normal - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

CID 0127 FMI 08 Pressure Sensor (Transmission Oil) Abnormal Signal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0177 FMI 08 Temperature Sensor (Transmission Oil) Abnormal Signal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 100 FMI 2 Pressure Sensor (Engine Oil) Incorrect Signal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 110 FMI 2 Temperature Sensor (Engine Coolant) Incorrect Signal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 111 FMI 3 Fluid Level Sensor (Engine Coolant) Voltage Above Normal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 175 FMI 2 Temperature Sensor (Engine Oil) Incorrect Signal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 175 FMI 3 Temperature Sensor (Engine Oil) Voltage Above Normal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 175 FMI 4 Temperature Sensor (Engine Oil) Voltage Below Normal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 190 FMI 2 Speed Sensor (Engine) Incorrect Signal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 190 FMI 3 Speed Sensor (Engine) Voltage Above Normal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Speed Sensor (Engine) - Adjust
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Pulse Width Modulated (PWM) Sensor - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Coolant Temperature Sensor - Test
3500 Engines with EUI Option

Troubleshooting

MID 036 - CID 0101 - FMI 03 Crankcase Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0101 - FMI 04 Crankcase Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0262 - FMI 04 5 Volt Sensor DC Power Supply short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0262 - FMI 03 5 Volt Sensor DC Power Supply short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0263 - FMI 03 Digital Sensor Supply short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0263 - FMI 04 Digital Sensor Supply short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0274 - FMI 04 Atmospheric Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0274 - FMI 13 Atmospheric Pressure calibration required
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0827 - FMI 08 Left Exhaust Temperature signal abnormal
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0261 - FMI 13 Engine Timing calibration required
3500B Engines and 3500 Engines with EUI Option

Engine Speed/Timing Sensor
3500B Engines and 3500 Engines with EUI Option

Digital Sensor Supply
3500B Engines and 3500 Engines with EUI Option

Engine Speed/Timing Sensor - Calibrate
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0289 - FMI 03 Unfiltered Fuel Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0289 - FMI 13 Unfiltered Fuel Pressure calibration required
3500B Engines and 3500 Engines with EUI Option

Analog Sensor Supply
3500B Engines and 3500 Engines with EUI Option

Engine Sensor Open/Short Test
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0101 - FMI 13 Crankcase Pressure calibration required
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0110 - FMI 04 Engine Coolant Temperature short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0168 - FMI 01 System Voltage Low
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0168 - FMI 02 System Voltage intermittent/erratic
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0274 - FMI 03 Atmospheric Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0542 - FMI 13 Unfiltered Engine Oil Pressure cal required
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0100 - FMI 13 Engine Oil Pressure calibration required
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0542 - FMI 02 Unfiltered Engine Oil Pressure misinstalled
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0190 - FMI 02 Loss of Engine Speed signal
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0190 - FMI 03 Engine Speed open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0190 - FMI 08 Engine Speed signal abnormal
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0091 - FMI 08 Throttle Position signal abnormal
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0289 - FMI 04 Unfiltered Fuel Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0542 - FMI 03 Unfiltered Engine Oil Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

Analog Sensor - Calibrate
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0100 - FMI 02 Engine Oil Pressure out of range
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0289 - FMI 02 Unfiltered Fuel Pressure misinstalled
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0828 - FMI 08 Right Exhaust Temperature signal abnormal
3500B Engines and 3500 Engines with EUI Option

Service Magazine

Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09

SHUTOFF GP

Operation and Maintenance Manual

Alarms and Shutoffs
3500 and 3500B Engines

Emergency Stopping
3500 and 3500B Engines

Manual Stop Procedure
3500 and 3500B Engines

SOLENOID GP

Troubleshooting

Injector Solenoids
3500B Engines and 3500 Engines with EUI Option

STARTING GP-AUTOMATIC

Operation and Maintenance Manual

Automatic Start/Stop - Inspect - Generator Set
3500 and 3500B Engines

STARTING AID GP

Cold Weather Starting
3500 and 3500B Engines

Systems Operation

Ether Control System
3500 Engines with EUI Option

Troubleshooting

MID 036 - CID 0545 - FMI 06 Ether Start Relay short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0545 - FMI 05 Ether Start Relay open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0546 - FMI 06 Ether Hold Relay short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0546 - FMI 05 Ether Hold Relay open/short to ground
3500B Engines and 3500 Engines with EUI Option

Ether Injection System
3500B Engines and 3500 Engines with EUI Option

STARTING MOTOR GP

General Service Information

Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES

Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES

Operation and Maintenance Manual

Air Tank Moisture and Sediment - Drain
3500 and 3500B Engines

Air Starting Motor Lubricator Bowl - Clean
3500 and 3500B Engines

Air Starting Motor Lubricator Oil Level - Check
3500 and 3500B Engines

Starting Motor - Inspect
3500 and 3500B Engines

Cold Weather Starting
3500 and 3500B Engines

Starting the Engine
3500 and 3500B Engines

Air Starting Motor - Inspect
3500 and 3500B Engines

Special Instruction

Caterpillar PRELUB® Diagnostics{1469}
Caterpillar PRELUB^® Diagnostics{1469}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Electric Starting Motor
3500 Engines with EUI Option

Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor
Starting Motor - Delco 50-MT

Electric Starting Motor
3500 Engines with EUI Option

Systems Operation

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors

Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors

Component Description
Starting Motor - Delco 50-MT

General Information
Starting Motor - Delco 50-MT

Normal Operation
Starting Motor - Delco 50-MT

Testing and Adjusting

Engaged Starting Motor - Troubleshoot
Electronic Modular Control Panel II (EMCP II) for EUI Engines

Starting Motor Magnetic Switch - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines

Engaged Starting Motor - Troubleshoot
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Starting Motor Magnetic Switch - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Electric Starting System
3500 Engines with EUI Option

Pinion Clearance Adjustment
3500 Engines with EUI Option

General Information (Air/Electric Starting System)
3500 Engines with EUI Option

No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors

Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors

Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT

Field Winding - Test
Starting Motor - Delco 50-MT

Armature - Test
Starting Motor - Delco 50-MT

Brush and Brush Holder - Check
Starting Motor - Delco 50-MT

Pinion Drive - Check
Starting Motor - Delco 50-MT

No Load - Test
Starting Motor - Delco 50-MT

Pinion Clearance - Adjust
Starting Motor - Delco 50-MT

Troubleshooting

Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
Starting Motor - Delco 50-MT

Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT

Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT

Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT

Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT

Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT

Disassembly and Assembly

Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
Starting Motor - Delco 50-MT

Starting Motor - Disassemble
Starting Motor - Delco 50-MT

Starting Motor - Assemble
Starting Motor - Delco 50-MT

SWITCH GP

Operation and Maintenance Manual

Battery Disconnect Switch - If Equipped
3500 and 3500B Engines

Technical Information Bulletin

Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off

Specifications

Magnetic Switch
3500 Engines with EUI Option

Systems Operation

Magnetic Switch
3500 Engines with EUI Option

Testing and Adjusting

CID 0096 FMI 03 Level Switch (Fuel) Voltage Above Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Level Switch (Coolant) - Troubleshoot
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Service Magazine

Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/05/04

TANK GP-AIR

Operation and Maintenance Manual

Air Tank Moisture and Sediment - Drain
3500 and 3500B Engines

TOOLS

Engine News

Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01

2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
2002/08/01

Tool Operating Manual

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Service Tools
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Test Tools for the Electrical System
3500 Engines with EUI Option

Troubleshooting

Electronic Service Tools
3500B Engines and 3500 Engines with EUI Option

Service Tools
N3 Series Brushless Alternators

Service Tools
Programmable Relay Control Module (PRCM)

Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors

Service Tools
Starting Motor - Delco 50-MT

Service Magazine

Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25

Two New Tools Check Tension on Engine Belts {0701, 0767}
2004/05/01

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

TRANSFORMER GP

Technical Information Bulletin

3300V/2400V Primary Taps Have Not Been Capped When The Third Transformer Is Installed For Use With EMCPII+ Control Panels
3300V/2400V Primary Taps Have Not Been Capped When The Third Transformer Is Installed For Use With EMCPII+ Control Panels

Power Transformer Failures Due to Overburden of the Medium Voltage Power Transformers
Power Transformer Failures Due to Overburden of the Medium Voltage Power Transformers

Overburdened Power Transformers Can Lead to Power Transformer Failures
Overburdened Power Transformers Can Lead to Power Transformer Failures

VALVE GP

Engine News

A New Screen is Used in the 1L-2073 Pressure Reducing Valve {1462}
2004/07/01

WIRING GP

Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/01

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/11/01

Heavy Duty Ring Terminals Are Now Being Used on High Voltage Generators {7553}
2005/11/07

New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
2013/11/04

Operation and Maintenance Manual

Battery - Recycle
3500 and 3500B Engines

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}

Proper Grounding for the 161-0797 Governor Control As {1264, 1408}
Proper Grounding for the 161-0797 Governor Control As {1264, 1408}

Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}

Schematic

Schematics & Wiring Diagrams
CATERPILLAR SWITCHGEAR

Technical Information Bulletin

Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)

Tool Operating Manual

Systems Operation

Internal Panel Components
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Senders
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Sensors
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Action Alarm and Alarm Silence Switch
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electrical Connector - Inspect
Electronic Modular Control Panel II (EMCP II) for EUI Engines

Reading DC Schematics
Electronic Modular Control Panel II (EMCP II) for EUI Engines

Schematics and Wiring Diagrams
Electronic Modular Control Panel II (EMCP II) for EUI Engines

Connector Contact Identification of Generator Set Control
Electronic Modular Control Panel II (EMCP II) for EUI Engines

General Information
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Electrical Components And Connector Locations
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0096 FMI 03 Level Switch (Fuel) Voltage Above Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0127 FMI 08 Pressure Sensor (Transmission Oil) Abnormal Signal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0172 FMI 04 Temperature Sender (Inlet Air) Voltage Below Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0175 FMI 04 Temperature Sender (Engine Oil) Voltage Below Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0177 FMI 08 Temperature Sensor (Transmission Oil) Abnormal Signal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0248 FMI 02 Cat Data Link Incorrect - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0263 FMI 03 Sensor Power Supply Voltage Above Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0263 FMI 04 Sensor Power Supply Voltage Below Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0271 FMI 03 Alarm (Action) Voltage Above Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0271 FMI 05 Alarm (Action) Current Below Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0271 FMI 06 Alarm (Action) Current Above Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0819 FMI 02 Display Data Link Incorrect - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0821 FMI 03 Display Power Supply Voltage Above Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0821 FMI 04 Display Power Supply Voltage Below Normal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Alert Indicator - Troubleshoot
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

LH/RH Switch - Troubleshoot
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Scroll Switch - Troubleshoot
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Clear/Mode Switch - Troubleshoot
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Alarm Silence Switch - Troubleshoot
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Connector Contact Description of Main Display Module
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

System Schematic
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 0175 FMI 08 Temperature Sender (Engine Oil) Abnormal Signal - Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Harness Code - Troubleshoot
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

Level Switch (Coolant) - Troubleshoot
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System

CID 248 FMI 9 CAT Data Link Abnormal Update - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 269 FMI 3 Sensor Power Supply Voltage Above Normal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

CID 269 FMI 4 Sensor Power Supply Voltage Below Normal - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Electrical Connector - Inspect
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Symbols
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Reading DC Schematics
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Connector Contact Identification of Generator Set Control
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Schematics and Wiring Diagrams
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines

Electric Starting System
3500 Engines with EUI Option

Electrical Connector - Inspect
Programmable Relay Control Module (PRCM)

Troubleshooting

MID 036 - CID 0101 - FMI 03 Crankcase Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0101 - FMI 04 Crankcase Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0262 - FMI 04 5 Volt Sensor DC Power Supply short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0262 - FMI 03 5 Volt Sensor DC Power Supply short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0263 - FMI 03 Digital Sensor Supply short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0263 - FMI 04 Digital Sensor Supply short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0274 - FMI 04 Atmospheric Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0274 - FMI 13 Atmospheric Pressure calibration required
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0827 - FMI 08 Left Exhaust Temperature signal abnormal
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0261 - FMI 13 Engine Timing calibration required
3500B Engines and 3500 Engines with EUI Option

Engine Speed/Timing Sensor
3500B Engines and 3500 Engines with EUI Option

Digital Sensor Supply
3500B Engines and 3500 Engines with EUI Option

Engine Speed/Timing Sensor - Calibrate
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0289 - FMI 03 Unfiltered Fuel Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0289 - FMI 13 Unfiltered Fuel Pressure calibration required
3500B Engines and 3500 Engines with EUI Option

Analog Sensor Supply
3500B Engines and 3500 Engines with EUI Option

Engine Sensor Open/Short Test
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0101 - FMI 13 Crankcase Pressure calibration required
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0110 - FMI 04 Engine Coolant Temperature short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0168 - FMI 01 System Voltage Low
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0168 - FMI 02 System Voltage intermittent/erratic
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0274 - FMI 03 Atmospheric Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0542 - FMI 13 Unfiltered Engine Oil Pressure cal required
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0100 - FMI 13 Engine Oil Pressure calibration required
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0542 - FMI 02 Unfiltered Engine Oil Pressure misinstalled
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0190 - FMI 02 Loss of Engine Speed signal
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0190 - FMI 03 Engine Speed open/short to +batt
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0190 - FMI 08 Engine Speed signal abnormal
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0091 - FMI 08 Throttle Position signal abnormal
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0289 - FMI 04 Unfiltered Fuel Pressure short to ground
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0542 - FMI 03 Unfiltered Engine Oil Pressure open/short to +batt
3500B Engines and 3500 Engines with EUI Option

Analog Sensor - Calibrate
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0100 - FMI 02 Engine Oil Pressure out of range
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0289 - FMI 02 Unfiltered Fuel Pressure misinstalled
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0828 - FMI 08 Right Exhaust Temperature signal abnormal
3500B Engines and 3500 Engines with EUI Option

Service Magazine

Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

CONNECTION GP

Operation and Maintenance Manual

Stator Lead - Check
SR4 HV and SR4B HV Generators

Electrical Connections - Check
SR4 HV and SR4B HV Generators

Electrical Connections - Check
SR500 Generators

Stator Lead - Check
SR500 Generators

Special Instruction

Proper Grounding for the 161-0797 Governor Control As {1264, 1408}
Proper Grounding for the 161-0797 Governor Control As {1264, 1408}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING GENERATOR TERMINAL RINGS ON CERTAIN HIGH VOLTAGE 3508, 3508B, 3512, 3512B, G3512, 3516, 3516B, G3516, G3516B GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING GENERATOR TERMINAL RINGS ON CERTAIN HIGH VOLTAGE 3508, 3508B, 3512, 3512B, G3512, 3516, 3516B, G3516, G3516B GENERATOR SETS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Service Letter-APD

Troubleshooting

Inspecting Electrical Connectors
3500B Engines and 3500 Engines with EUI Option

Service Magazine

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}

RELAY GP

Troubleshooting

MID 036 - CID 0444 - FMI 05 Start Relay open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0444 - FMI 06 Start Relay short to ground
3500B Engines and 3500 Engines with EUI Option

ELECTRONICS GP-MONITOR

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Special Instruction

Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}

Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}

Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}

Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQ^TM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

Technical Information Bulletin

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/22

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

HEATER GP

Engine News

A New Thermostat for the Jacket Water Heater {1383}
2006/09/11

Operation and Maintenance Manual

Jacket Water Heater - Check
3500 and 3500B Engines

Cold Weather Starting
3500 and 3500B Engines

Technical Information Bulletin

7E6248 Jacket Water Heater Group
7E6248 Jacket Water Heater Group

ELECTRONICS GP-WORK TOOL

Special Instruction

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

ELECTRONICS GP-COMMUNICATION

Engine News

New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
2013/11/04

Troubleshooting SIM Cards On Product Links 522 and 523 For All Generator Sets {7606}
2014/05/23

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

Special Instruction

Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}

Installation Procedure for Product Link PL421 Retrofit for Generator Sets{7606}
Installation Procedure for Product Link PL421 Retrofit for Generator Sets{7606}

Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}

Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115}
Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115}

Service Magazine

New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17

Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/07/14

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software Is Now Available for All Cat® Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606}
2014/08/08

Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
2014/08/13

Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/22

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat® Products with Cat® Product Link 121/321 {7606}
2014/12/24

Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06

Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606, 7620}
2015/06/26

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
2015/09/11

ELECTRONICS GP-GENERATOR SET

Engine News

New EMCP 3.2/3.3 Software Is Now Available For Use On Certain Cat® Products {4490, 7620}
2014/11/14

Special Instruction

Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}

Technical Information Bulletin

Data link J1939 on EMCP 3.2 and EMCP 3.3 Fails to Communicate on Certain Generator Sets{4490}
Data link J1939 on EMCP 3.2 and EMCP 3.3 Fails to Communicate on Certain Generator Sets{4490}

Service Magazine

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

METER GP-SERVICE

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

HARNESS GP

Special Instruction

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Tool Operating Manual

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

CABINET GP

Operation and Maintenance Manual

Maintenance Program
SR500 Generators

Truck sale:

Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.

500,000

Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.

350,000

Caterpillar 3516B, Stationary Generator Sets, Construction

Caterpillar 3516B
- Industrial engines
RING POWER CORP.

Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.