COOLING SYSTEM
FAN GPRADIATOR GP
HEAT EXCHANGER GP
LINES GP-WATER
COOLING SYSTEM
FAN GP#SEBP26570150
7W-6906: FAN GP-BLOWER
7W-6906 FAN GP-BLOWER
1524-MM DIAMETER-STANDARD ROTATION
FOR USE WITH ENGINE MOUNTED FAN DRIVE AND FOLDED CORE RADIATOR
AN ATTACHMENT
1524-MM DIAMETER-STANDARD ROTATION
FOR USE WITH ENGINE MOUNTED FAN DRIVE AND FOLDED CORE RADIATOR
AN ATTACHMENT
Parts for your 3516B GEN SET ENGINE:
CATERPILLAR SIS#SEBP26570151
9Y-7822: FLANGE GP-RADIATOR
9Y-7822 FLANGE GP-RADIATOR -DUCT
FOR USE WITH 46-SQ FOOT CONVENTIONAL RADIATOR
AN ATTACHMENT
FOR USE WITH 46-SQ FOOT CONVENTIONAL RADIATOR
AN ATTACHMENT
#SEBP26570152
7C-8790: GUARD GP-RADIATOR
Parts for your 3516B GEN SET ENGINE:
CATERPILLAR SIS#SEBP26570153
3N-8890: HEAT EXCHANGER GP-SEA WATER
3N-8890 HEAT EXCHANGER GP-SEA WATER
72-SQ FT COOLING AREA
PART OF 3N-8891 HEAT EXCHANGER GP-SEA WATER
AN ATTACHMENT
72-SQ FT COOLING AREA
PART OF 3N-8891 HEAT EXCHANGER GP-SEA WATER
AN ATTACHMENT
Parts for your 3516B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5L-9128 | [3] | ROD AS-ZINC | |
| (EACH INCLUDES) | ||||
| 6L-2286 | [1] | PLUG-PIPE | ||
| 6L-2284 | [1] | ROD-ZINC (HEAT EXCHANGER) | ||
| 2. | 2W-4875 | [2] | BRACKET AS | |
| 3. | 3N-9610 | [1] | BONNET | |
| 4. | 3N-9629 | [1] | SHELL AS | |
| 5. | 6L-2279 | [4] | PLUG-PIPE | |
| 6. | 6L-2282 | [2] | PLUG-PIPE | |
| 7. | 7L-0487 | [1] | GASKET | |
| 8. | 8L-4952 | [1] | GASKET | |
| 9. | 8L-4955 | [1] | BONNET-RETURN | |
| 10. | 8L-9767 B | [48] | SHIM (0.015-IN THK) | |
| 11. | 293-0008 | [1] | CORE AS (HEAT EXCHANGER) | |
| 12. | 0T-0320 | [12] | BOLT (7/16-14X1.25-IN) | |
| 13. | 0T-0768 | [12] | BOLT (7/16-14X1.75-IN) | |
| 14. | 1H-1200 | [1] | PIN-SPRING | |
| 15. | 3B-4506 | [4] | LOCKWASHER | |
| 16. | 3B-4507 | [24] | LOCKWASHER | |
| 17. | 3N-9606 | [2] | U-BOLT | |
| 18. | 7L-0486 | [1] | SEAL-RUBBER | |
| 19. | 9S-8752 | [4] | NUT-FULL (3/8-16-THD) | |
| B | USE AS REQUIRED | |||
#SEBP26570154
3N-8891: HEAT EXCHANGER GP-SEA WATER
Parts for your 3516B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-9720 | [2] | FLANGE | |
| 2. | 9B-7237 | [8] | BOLT (3/8-16X1.25-IN) | |
| 3. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4. | 4L-3862 | [2] | GASKET | |
| 5. | 6V-8801 | [8] | NUT (3/8-16-THD) | |
| 6. | 5S-7383 | [8] | BOLT (3/8-16X1.75-IN) | |
| 7. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 2N-8263 | [2] | FLANGE | |
| 9. | 9M-1289 | [2] | GASKET | |
| 10. | 3N-8890 Y | [1] | HEAT EXCHANGER GP-SEA WATER | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26570155
3N-8892: HEAT EXCHANGER GP-SEA WATER
3N-8892 HEAT EXCHANGER GP-SEA WATER
90-SQ FT COOLING AREA
PART OF 3N-8893 HEAT EXCHANGER GP-SEA WATER
AN ATTACHMENT
90-SQ FT COOLING AREA
PART OF 3N-8893 HEAT EXCHANGER GP-SEA WATER
AN ATTACHMENT
Parts for your 3516B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5L-9128 | [3] | ROD AS-ZINC | |
| (EACH INCLUDES) | ||||
| 1A. | 6L-2284 | [1] | ROD-ZINC (HEAT EXCHANGER) | |
| 1B. | 6L-2286 | [1] | PLUG-PIPE | |
| 2. | 2W-4875 | [2] | BRACKET AS | |
| 3. | 3N-9610 | [1] | BONNET | |
| 4. | 6L-2279 | [3] | PLUG-PIPE | |
| 5. | 6L-2282 | [2] | PLUG-PIPE | |
| 6. | 7L-0487 | [1] | GASKET | |
| 7. | 8L-4952 | [1] | GASKET | |
| 8. | 8L-4955 | [1] | BONNET-RETURN | |
| 9. | 8L-5066 | [1] | SHELL AS | |
| 10. | 8L-9767 B | [48] | SHIM (0.015-IN THK) | |
| 11. | 293-0009 | [1] | CORE AS (HEAT EXCHANGER) | |
| 12. | 0T-0320 | [12] | BOLT (7/16-14X1.25-IN) | |
| 13. | 0T-0768 | [12] | BOLT (7/16-14X1.75-IN) | |
| 14. | 1H-1200 | [1] | PIN-SPRING | |
| 15. | 3B-4506 | [4] | LOCKWASHER | |
| 16. | 3B-4507 | [24] | LOCKWASHER | |
| 17. | 3N-9606 | [2] | U-BOLT | |
| 18. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 19. | 7L-0486 | [1] | SEAL-RUBBER | |
| B | USE AS REQUIRED | |||
#SEBP26570156
3N-8893: HEAT EXCHANGER GP-SEA WATER
Parts for your 3516B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3N-8892 Y | [1] | HEAT EXCHANGER GP-SEA WATER | |
| 2. | 9S-8752 | [8] | NUT-FULL (3/8-16-THD) | |
| 3. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4. | 0S-1571 | [8] | BOLT (3/8-16X1.75-IN) | |
| 5. | 4B-4278 | [16] | WASHER (10.2X20.5X1.6-MM THK) | |
| 6. | 9M-1289 | [2] | GASKET | |
| 7. | 2N-8263 | [2] | FLANGE | |
| 8. | 1A-8063 | [16] | BOLT (3/4-10X2.5-IN) | |
| 9. | 5P-8248 | [32] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 10. | 2J-3506 | [16] | NUT-FULL (3/4-10-THD) | |
| 11. | 101-8679 | [2] | FLANGE | |
| 12. | 8F-2347 | [2] | GASKET | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26570157
132-8922: HOUSING & REGULATOR GP
132-8922 HOUSING & REGULATOR GP -INLET CONTROL
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3516B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-6466 | [1] | HOUSING AS-REGULATOR | |
| 1A. | 3S-9643 | [4] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | |
| 2. | 248-5513 | [4] | REGULATOR-TEMPERATURE (92-DEG C)(WATER) | |
| 3. | 1A-5183 | [5] | BOLT (3/8-16X4.75-IN) | |
| 4. | 0S-1588 | [5] | BOLT (3/8-16X1.25-IN) | |
| 5. | 7N-4927 | [1] | GASKET-HOUSING COVER | |
| 6. | 111-9374 | [1] | HOUSING-REGULATOR | |
| 7. | 8T-6762 | [3] | PLUG-PIPE (1/2-14-THD) | |
| 8. | 122-8856 | [2] | GASKET | |
| 9. | 0S-1594 B | [8] | BOLT (3/8-16X1-IN) | |
| 10. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 11. | 6V-9027 | [1] | SEAL-O-RING | |
| 12. | 106-3512 B | [2] | PLATE | |
| B | USE AS REQUIRED | |||
#SEBP26570158
9Y-6064: HOUSING & REGULATOR GP
9Y-6064 HOUSING & REGULATOR GP -INLET CONTROL
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3516B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-6466 C | [1] | HOUSING AS-REGULATOR | |
| 1A. | 3S-9643 | [4] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | |
| 2. | 248-5513 C | [4] | REGULATOR-TEMPERATURE (92-DEG C)(WATER) | |
| 3. | 1A-5183 | [5] | BOLT (3/8-16X4.75-IN) | |
| 4. | 0S-1588 | [5] | BOLT (3/8-16X1.25-IN) | |
| 5. | 7N-4927 | [1] | GASKET-HOUSING COVER | |
| 6. | 8N-9624 | [1] | HOUSING-REGULATOR | |
| 7. | 8T-6762 C | [3] | PLUG-PIPE (1/2-14-THD) | |
| 8. | 122-8856 | [2] | GASKET | |
| 9. | 0S-1594 | [8] | BOLT (3/8-16X1-IN) | |
| 10. | 106-3512 C | [2] | PLATE | |
| 11. | 6V-9027 C | [1] | SEAL-O-RING | |
| 12. | 9S-4182 C | [1] | PLUG (7/16-20-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP26570159
9Y-9171: HOUSING & REGULATOR GP
9Y-9171 HOUSING & REGULATOR GP -OUTLET CONTROL
Parts for your 3516B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-2748 C | [1] | HOUSING AS | |
| 1A. | 3S-9643 | [4] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | |
| 1B. | 111-4374 | [1] | VALVE AS | |
| 2. | 248-5513 | [4] | REGULATOR-TEMPERATURE (92-DEG C)(WATER) | |
| 3. | 7N-4927 | [1] | GASKET-HOUSING COVER | |
| 4. | 7F-3425 | [5] | BOLT (3/8-16X5.75-IN) | |
| 5. | 7W-6492 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 6. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 7. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8. | 7N-4928 | [1] | COVER | |
| 9. | 4W-3100 | [1] | GASKET | |
| 10. | 9S-4182 B | [1] | PLUG (7/16-20-THD) | |
| 11. | 6V-9027 B | [1] | SEAL-O-RING | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
COOLING SYSTEM
FAN GP
Engine News
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
Service Letter-NACD
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
The Fan Spider To Drive Hub Retaining Bolts Needs To Be Tightened To The Correct Torque On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Commercial Engines With IEA Radiators
Service Letter-Asia
Service Letter-APD
Caterpillar Parts SIS Catalog 3516B :
Truck sale:
500,000
Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.
- Stationary Generator Sets
FINNING CHILE S.A.


