AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

133-5994 PUMP GP-FUEL INJECTION S/N 3NS246-UP Type 1 AN ATTACHMENT 3516B GEN SET ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER

GEN SET ENGINE 3516B GEN SET ENGINE 3NS
 3516 Generator Set Engine With EUI Option 3NS00001-UP SEBP2657 3516B 3NS   (1996)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
133-5994 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
133-5994 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
133-5994 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
133-5994 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
136-5929 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
136-5929 PUMP GP-FUEL INJECTION
 

#SEBP26570270
 

133-5994: PUMP GP-FUEL INJECTION

133-5994 PUMP GP-FUEL INJECTION
S/N 3NS246-UP
Type 1
AN ATTACHMENT
i02215337 SEBP2657
1335994 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 234-4182 [1] PLUG  
4. 250-1304 C [1] INJECTOR GP-FUEL  
4A. 245-4907 [1] SEAL-O-RING  
4B. 245-4908 [1] SEAL-O-RING  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26570271
 

133-5994: PUMP GP-FUEL INJECTION

133-5994 PUMP GP-FUEL INJECTION
S/N 3NS246-UP
Type 2
AN ATTACHMENT
i05867533 SEBP2657
1335994 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 234-4182 [1] PLUG  
4. 392-0204 CY [1] INJECTOR GP-FUEL  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26570272
 

136-5929: PUMP GP-FUEL INJECTION

136-5929 PUMP GP-FUEL INJECTION
S/N 3NS1-225
i00502909 SEBP2657
1365929 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-2601 Y [1] INJECTOR GP-FUEL  
2. 7C-2615 [1] PLUG  
3. 7E-2580 [1] CLAMP-INJECTOR  
4. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26570273
 

136-5929: PUMP GP-FUEL INJECTION

136-5929 PUMP GP-FUEL INJECTION
S/N 3NS226-245
i01292313 SEBP2657
1365929 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-4672 CY [1] INJECTOR GP-FUEL  
2. 7C-2615 [1] PLUG  
3. 7E-2580 [1] CLAMP-INJECTOR  
4. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26570274
 

136-5929: PUMP GP-FUEL INJECTION

136-5929 PUMP GP-FUEL INJECTION
S/N 3NS246-UP
i02215354 SEBP2657
1365929 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 234-4182 [1] PLUG  
4. 250-1307 C [1] INJECTOR GP-FUEL  
4A. 245-4907 [1] SEAL-O-RING  
4B. 245-4908 [1] SEAL-O-RING  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26570275
 

121-3327: PUMP GP-FUEL PRIMING

121-3327 PUMP GP-FUEL PRIMING
AN ATTACHMENT
i00481577 SEBP2657
1213327 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0706 [4] CLAMP AS  
2. 6B-0933 [1] SPACER (10.31X19.05X6.35-MM THK)  
3. 121-0467 [1] TUBE AS  
4. 132-9430 [1] BRACKET  
5. 0S-1594 [4] BOLT (3/8-16X1-IN)  
6. 3J-1907 [1] SEAL-O-RING  
7. 4K-6297 [1] ELBOW  
8. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 6V-0871 [1] GROMMET  
10. 7L-6326 [1] CLIP  
11. 8M-0506 [1] ADAPTER-O-RING  
12. 8T-0151 [1] ADAPTER  
13. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
 

#SEBP26570276
 

165-9154: PUMP GP-FUEL PRIMING

165-9154 PUMP GP-FUEL PRIMING -MANUAL
AN ATTACHMENT
i01075524 SEBP2657
1659154 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8389 [1] GASKET (FUEL PRIMING PUMP)  
2. 183-2823 [1] PUMP AS-FUEL PRIMING  
  061-7539 [1] SEAL-O-RING  
  229-3218 [2] VALVE AS  
3. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
4. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
6. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP26570277
 

169-8615: PUMP GP-FUEL TRANSFER

169-8615 PUMP GP-FUEL TRANSFER
S/N 3NS1-245
ONE SECTION GEAR
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
i01096238 SEBP2657
1698615 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4003 [1] GEAR AS-IDLER  
2. 1W-4005 [1] HEAD AS  
  1W-4009 [1] VALVE AS (FUEL)  
3. 1W-4006 [1] CASING  
4. 1W-4007 [1] POPPET-VALVE (RELIEF)  
5. 1W-4008 [1] GASKET  
6. 1W-4010 [1] PLATE AS  
  7C-2870 [2] BUSHING-TERMINAL  
7. 1W-4121 [1] BRACKET AS  
  7C-2870 [2] BUSHING-TERMINAL  
8. 1W-4655 [1] SPRING-RELIEF VALVE  
9. 1W-6935 [2] SLEEVE  
10. 1W-6936 [1] CAP  
11. 6V-0895 [2] SEAL-O-RING  
12. 112-3597 [1] SEAL-LIP TYPE  
13. 124-9437 [1] SHAFT AS-DRIVE  
14. 169-8617 [1] SEAL-LIP TYPE  
15. 7W-3556 [1] WASHER (14.27X20.57X1.5-MM THK)  
16. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
17. 8S-4710 [1] BOLT (1/4-20X4-IN)  
 

#SEBP26570278
 

1N-4478: PUMP GP-FUEL TRANSFER

1N-4478 PUMP GP-FUEL TRANSFER
ONE SECTION GEAR
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
i00090547 SEBP2657
1N4478 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4003 [1] GEAR AS-IDLER  
2. 124-9437 [1] SHAFT AS-DRIVE  
3. 1W-4005 [1] HEAD AS  
3A. 1W-4009 [1] VALVE AS (FUEL)  
4. 1W-4006 [1] CASING  
5. 1W-4007 [1] POPPET-VALVE (RELIEF)  
6. 1W-4008 [1] GASKET  
7. 1W-4010 C [1] PLATE AS  
  7C-2870 [2] BUSHING-TERMINAL  
8. 1W-4121 C [1] BRACKET AS  
  7C-2870 [2] BUSHING-TERMINAL  
9. 112-3596 [1] SEAL-LIP TYPE  
10. 112-3597 [1] SEAL-LIP TYPE  
11. 6V-0895 [2] SEAL-O-RING  
12. 7W-3556 C [1] WASHER (14.27X20.57X1.5-MM THK)  
13. 8S-4710 [1] BOLT (1/4-20X4-IN)  
14. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
15. 1W-4655 [1] SPRING-RELIEF VALVE  
16. 1W-6935 [2] SLEEVE  
17. 1W-6936 [1] CAP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP26570279
 

313-7770: PUMP GP-FUEL TRANSFER

313-7770 PUMP GP-FUEL TRANSFER -1-SECTION GEAR
S/N 3NS246-UP
PART OF 8N-6151 PUMP GP-FUEL TRANSFER
i02915171 SEBP2657
3137770 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
    AVAILABLE REPAIR KIT(S):
  255-8691 [1] KIT-SEAL  
    (KIT INCLUDES GASKET & SEALS)
  255-8692 [1] KIT-REPAIR (GEAR, SHAFT)  
    (KIT INCLUDES GEAR AS, BUSHINGS, & SHAFT AS)
 

Information:

Engine News
Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/05/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Be Sure To Tighten The Locknut For The Adjusting Screw For The Fuel Injector Rocker Arm To The Correct Torque {1290}
2001/05/01
Correct Lash Setting for the Fuel Injector {1290}
2003/10/01
New Sequence for Adjusting the Fuel Injectors in 3516, 3516B, and 3516C Engines {1290}
2012/12/21
Cat Reman Is Announcing an Appearance Change to the EI550 Classic, Bridge, and ACERT Electronic Unit Injectors for Certain Commercial Engines {1290}
2015/06/05
Operation and Maintenance Manual
Fuel Injector - Inspect/Adjust
3500 and 3500B Engines
Special Instruction
Performing a Multiple Cylinder Cutout Test {1290}
Performing a Multiple Cylinder Cutout Test {1290}
Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}
Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
Certain Cat<SUP>&reg;</SUP> Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
Specifications
Fuel Injector Mechanism
3500 Engines with EUI Option
Fuel Injector
3500 Engines with EUI Option
Systems Operation
Fuel Injector
3500 Engines with EUI Option
Information Release Memo
CAT REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN 3406 AND 3500 ELECTRONIC UNIT INJECTORS
CAT REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN 3406 AND 3500 ELECTRONIC UNIT INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Checking Engine Cylinders with an Electronic Service Tool
3500 Engines with EUI Option
Fuel Injector Trim Code
3500 Engines with EUI Option
Checking and Calibrating Electronic Injection Timing with the Electronic Service Tool
3500 Engines with EUI Option
Fuel Injector Adjustment
3500 Engines with EUI Option
Checking Engine Cylinders
3500 Engines with EUI Option
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Engines with EUI Option
Troubleshooting
MID 036 - CID 0001 - FMI 05 Injector Cylinder 1 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0001 - FMI 06 Injector Cylinder 1 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0002 - FMI 05 Injector Cylinder 2 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0002 - FMI 06 Injector Cylinder 2 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0003 - FMI 05 Injector Cylinder 3 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0003 - FMI 06 Injector Cylinder 3 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0004 - FMI 05 Injector Cylinder 4 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0004 - FMI 06 Injector Cylinder 4 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0005 - FMI 05 Injector Cylinder 5 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0005 - FMI 06 Injector Cylinder 5 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0006 - FMI 05 Injector Cylinder 6 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0006 - FMI 06 Injector Cylinder 6 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0007 - FMI 05 Injector Cylinder 7 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0007 - FMI 06 Injector Cylinder 7 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0008 - FMI 05 Injector Cylinder 8 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0008 - FMI 06 Injector Cylinder 8 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0009 - FMI 06 Injector Cylinder 9 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0013 - FMI 05 Injector Cylinder 13 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0013 - FMI 06 Injector Cylinder 13 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0014 - FMI 05 Injector Cylinder 14 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0014 - FMI 06 Injector Cylinder 14 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0015 - FMI 06 Injector Cylinder 15 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0015 - FMI 05 Injector Cylinder 15 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0016 - FMI 06 Injector Cylinder 16 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0016 - FMI 05 Injector Cylinder 16 open circuit
3500B Engines and 3500 Engines with EUI Option
Injector Solenoids
3500B Engines and 3500 Engines with EUI Option
Noise Coming from Cylinder
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0009 - FMI 05 Injector Cylinder 9 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0010 - FMI 05 Injector Cylinder 10 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0010 - FMI 06 Injector Cylinder 10 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0011 - FMI 05 Injector Cylinder 11 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0011 - FMI 06 Injector Cylinder 11 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0012 - FMI 05 Injector Cylinder 12 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0012 - FMI 06 Injector Cylinder 12 short
3500B Engines and 3500 Engines with EUI Option
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3516B :

PUMP GP-FUEL INJECTION
133-5994 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
133-5994 PUMP GP-FUEL INJECTION
MANIFOLD GP-FUEL
156-9756 MANIFOLD GP-FUEL
MANIFOLD GP-FUEL
156-9755 MANIFOLD GP-FUEL
LINES GP-FUEL INJECTION
115-0742 LINES GP-FUEL INJECTION
LINES GP-FLEXIBLE FUEL
5N-2438 LINES GP-FLEXIBLE FUEL
INJECTOR GP-FUEL
392-0204 INJECTOR GP-FUEL
INJECTOR GP-FUEL
172-4675 INJECTOR GP-FUEL
PUMP GP-FUEL INJECTION
133-5994 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
136-5929 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
136-5929 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
136-5929 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
121-3327 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
165-9154 PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
169-8615 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1N-4478 PUMP GP-FUEL TRANSFER

Truck sale:

Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
 
500,000 
Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.
 
350,000 
Caterpillar 3516B, Stationary Generator Sets, Construction


Caterpillar 3516B
 
Caterpillar 3516B
- Industrial engines
RING POWER CORP.
Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.