AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

110-5099 CYLINDER HEAD GP PART OF 110-5096, 7W-2203 CYLINDER HEAD GP FIELD REPLACEMENT ORDER @@@@@110-5096@@@@@ ALSO AN ATTACHMENT 3406B


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP

MARINE ENGINE 3406B MARINE ENGINE 4TB
 3406C Marine Engine 4TB03482-UP SEBP2658 3406B 4TB   (1983)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
9Y-3775 CYLINDER HEAD AS
CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP
CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
 

#SEBP26580070
 

110-5099: CYLINDER HEAD GP

110-5099 CYLINDER HEAD GP
PART OF 110-5096, 7W-2203 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@110-5096@@@@@
ALSO AN ATTACHMENT
i00123134 SEBP2658
1105099 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [12] PLUG-CUP  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 2M-6471 [1] PLUG-CUP  
5. 3B-0623 [10] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP26580071
 

4W-2436: CYLINDER HEAD GP

4W-2436 CYLINDER HEAD GP
S/N 4TB3482-3588
i00109099 SEBP2658
4W2436 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2203 Y [1] CYLINDER HEAD GP  
2. 6L-8562 C [1] STUD-TAPERLOCK (3/8-16X1.77-IN)  
3. 7W-5435 C [6] ADAPTER-NOZZLE  
4. 5H-7153 [6] SEAL-O-RING  
5. 4N-7253 [6] GASKET-CHAMBER  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 6L-7442 [6] STUD-TAPERLOCK (5/16-18X1.08-IN)  
8. 4W-1055 [24] SEAL  
9. 2H-3750 [20] BOLT (3/4-16X7.5-IN)  
10. 7E-6000 [1] GASKET-CYLINDER HEAD  
11. 3J-5390 C [1] PLUG (3/8-18-THD)  
12. 5H-1504 [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 3J-5389 [3] PLUG (EXTERNAL)  
14. 3J-5389 B [1] PLUG (EXTERNAL)(USE WITHOUT AIR COMPRESSOR)  
15. 4S-6137 [11] STUD-TAPERLOCK (3/8-16X3.1-IN)  
16. 3S-5496 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26580072
 

4W-2436: CYLINDER HEAD GP

4W-2436 CYLINDER HEAD GP
S/N 4TB3589-3667
i00109100 SEBP2658
4W2436 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2203 Y [1] CYLINDER HEAD GP  
2. 3S-5496 [2] SEAL-O-RING  
3. 7W-5435 [6] ADAPTER-NOZZLE  
4. 5H-7153 [6] SEAL-O-RING  
5. 4N-7253 [6] GASKET-CHAMBER  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 6L-7442 [6] STUD-TAPERLOCK (5/16-18X1.08-IN)  
8. 4W-1055 [24] SEAL  
9. 9X-8904 [20] BOLT  
10. 6I-3066 [1] GASKET-CYLINDER HEAD  
11. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
12. 5H-1504 [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 7W-6492 [3] PLUG-PIPE (1/2-14-THD)  
14. 7W-6492 B [1] PLUG-PIPE (1/2-14-THD)  
    (USE WITHOUT AIR COMPRESSOR)
15. 4S-6137 [12] STUD-TAPERLOCK (3/8-16X3.1-IN)  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26580073
 

4W-2436: CYLINDER HEAD GP

4W-2436 CYLINDER HEAD GP
S/N 4TB3668-UP
i00109101 SEBP2658
4W2436 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2203 Y [1] CYLINDER HEAD GP  
2. 3S-5496 [2] SEAL-O-RING  
3. 100-6920 C [6] ADAPTER-NOZZLE  
4. 7L-4774 C [6] SEAL-O-RING  
5. 4N-7253 [6] GASKET-CHAMBER  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 6L-7442 [6] STUD-TAPERLOCK (5/16-18X1.08-IN)  
8. 3E-6772 [24] SEAL (WATER)  
9. 124-1855 C [20] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
10. 6I-3066 [1] GASKET-CYLINDER HEAD  
11. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
12. 5H-1504 C [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 7W-6492 [3] PLUG-PIPE (1/2-14-THD)  
14. 7W-6492 B [1] PLUG-PIPE (1/2-14-THD)  
    (USE WITHOUT AIR COMPRESSOR)
15. 4S-6137 [1] STUD-TAPERLOCK (3/8-16X3.1-IN)  
16. 106-1792 [11] STUD-TAPERLOCK (3/8-16X4-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26580074
 

7W-2203: CYLINDER HEAD GP

7W-2203 CYLINDER HEAD GP
PART OF 4W-2436 CYLINDER HEAD GP
Type 1
i00109127 SEBP2658
7W2203 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-0007 CY [1] CYLINDER HEAD AS  
2. 2W-2622 [12] VALVE-INLET  
3. 2N-5775 [12] DOWEL  
4. 2A-4429 [48] LOCK-RETAINER  
5. 4W-2474 [24] ROTOCOIL AS  
6. 4W-2471 [24] SPRING-VALVE  
7. 1W-3860 [12] VALVE-EXHAUST  
8. 173-7188 [24] GUIDE-VALVE  
9. 4W-2472 [24] SPRING-VALVE  
10. 4W-2473 [24] WASHER-VALVE SPRING GUIDE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26580075
 

7W-2203: CYLINDER HEAD GP

7W-2203 CYLINDER HEAD GP
PART OF 4W-2436 CYLINDER HEAD GP
Type 2
i00109128 SEBP2658
7W2203 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3775 CY [1] CYLINDER HEAD AS  
2. 108-5902 [12] VALVE-INLET  
3. 2N-5775 [12] DOWEL  
4. 2A-4429 [48] LOCK-RETAINER  
5. 4W-2474 [24] ROTOCOIL AS  
6. 4W-2471 [24] SPRING-VALVE  
7. 106-1111 [12] VALVE-EXHAUST  
8. 173-7188 [24] GUIDE-VALVE  
9. 4W-2472 [24] SPRING-VALVE  
10. 4W-2473 [24] WASHER-VALVE SPRING GUIDE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26580076
 

7W-2203: CYLINDER HEAD GP

7W-2203 CYLINDER HEAD GP
PART OF 4W-2436 CYLINDER HEAD GP
Type 3
i00122401 SEBP2658
7W2203 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-5099 CY [1] CYLINDER HEAD GP  
2. 115-2368 [12] VALVE-INLET  
3. 2N-5775 [12] DOWEL  
4. 2A-4429 [48] LOCK-RETAINER  
5. 4W-2474 [24] ROTOCOIL AS  
6. 4W-2471 [24] SPRING-VALVE (OUTER)  
7. 115-2367 [12] VALVE-EXHAUST  
8. 122-7374 [24] GUIDE-VALVE (STANDARD)  
  121-9859 AB GUIDE-VALVE (0.13-MM OS)  
  121-9860 AB GUIDE-VALVE (0.51-MM OS)  
9. 4W-2472 [24] SPRING-VALVE (INNER)  
10. 4W-2473 [24] WASHER-VALVE SPRING GUIDE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26580077
 

124-9042: DAMPER & PULLEY GP

124-9042 DAMPER & PULLEY GP
292.1 MM DIA. SINGLE GROOVE PULLEYS
AN ATTACHMENT
i00519677 SEBP2658
1249042 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1047 [1] PULLEY (1-GROOVE)  
2. 167-8126 [1] DAMPER AS  
3. 177-9026 [1] ADAPTER-DAMPER  
4. 7H-5569 [6] BOLT (5/8-18X7.5-IN)  
5. 3N-6059 [1] SHAFT-STUB  
6. 9F-2186 [1] KEY-WOODRUFF  
7. 5P-8247 [6] WASHER-HARD (17X32X3.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26580078
 

4P-5532: DAMPER & PULLEY GP

4P-5532 DAMPER & PULLEY GP
VISCOUS, 1 GROOVE PULLEY
i00384181 SEBP2658
4P5532 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1047 [1] PULLEY (1-GROOVE)  
2. 167-8126 [1] DAMPER AS  
3. 177-9024 [1] ADAPTER-DAMPER  
4. 6F-7024 [6] BOLT (5/8-18X5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26580079
 

4P-9183: DAMPER & PULLEY GP

4P-9183 DAMPER & PULLEY GP
4 GROOVE PULLEY
AN ATTACHMENT
i00372385 SEBP2658
4P9183 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-9024 [1] ADAPTER-DAMPER  
2. 167-8126 [1] DAMPER AS  
3. 6N-7378 [1] PULLEY-CRANKSHAFT (4-GROOVE)  
4. 8S-4753 [6] BOLT (5/8-18X8-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/07/11
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage
1985/08/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Change To Interval For Valve Lash Adjustment
1987/02/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Rubber Water Seals Available
1987/07/01
High Alloy Cylinder Head Improved
1987/07/01
Improved Valve Mechanism Cover Groups
1988/01/01
Seal Retainer And Seals Are Required When A New Cylinder Head Assembly Is Installed
1988/11/01
New Head Gasket Available; Head Gasket Replacement Guidelines
1989/02/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Improved Head Gasket Used; Service Tips
1990/03/01
New Valve Lifter Improves Oil Flow To Top Of Engine
1990/04/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cylinder Heads Have Additional Coolant Passages
1992/06/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Intake And Exhaust Valves Used {1105,1100}
1994/06/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Valve Lash Adjustment Intervals{1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
New Stronger Cylinder Head Bolts Used{1100}
1996/05/09
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Improved Reman Cylinder Heads Are Now Used on Certain 3406 Mechanical Engines {1100, 1101}
2012/04/05
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Replacement Procedure:
Replacement Procedure:
Specifications
Valves
3406B INDUSTRIAL & MARINE ENGINES
Cylinder Head
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406C INDUSTRIAL & MARINE ENGINES
Valves
3406C INDUSTRIAL & MARINE ENGINES
Cylinder Head
3406C INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Cylinder Head Assembly
3406B INDUSTRIAL & MARINE ENGINES
Valves
3406B INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3406B INDUSTRIAL & MARINE ENGINES
Bridge Dowels
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Cylinder Head Assembly
3406C INDUSTRIAL & MARINE ENGINES
Valves
3406C INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3406C INDUSTRIAL & MARINE ENGINES
Bridge Dowels
3406C INDUSTRIAL & MARINE ENGINES
Valve Guides
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Silicone Rubber Water Seals Available{1100}
1987/07/06
High Alloy Cylinder Head Improved{1101}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Available; Head Gasket Replacement Guidelines{1124,1216,1221}
1989/01/30
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Cylinder Heads Have Additional Coolant Passages{1101,1100}
1992/06/29
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04

Caterpillar Parts SIS Catalog 3406B :

CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP
CYLINDER HEAD AS
9Y-3775 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-0007 CYLINDER HEAD AS
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
DAMPER & PULLEY GP
124-9042 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-5532 DAMPER & PULLEY GP

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.