AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

177-8807 DRIVE GP-GOVERNOR & FUEL PUMP S/N 4TB6819-UP 3406B MARINE ENGINE


FUEL SYSTEM
GOVERNOR GP
DRIVE GP-TACHOMETER
PUMP GP-FUEL INJECTION
FILTER GP-FUEL

MARINE ENGINE 3406B MARINE ENGINE 4TB
 3406C Marine Engine 4TB03482-UP SEBP2658 3406B 4TB   (1983)

FUEL SYSTEM

GOVERNOR GP
ACTUATOR GP-AIR
5N-3220 ACTUATOR GP-AIR
DRIVE GP-GOVERNOR & FUEL PUMP
177-8807 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
1W-6378 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
4P-1925 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
9N-6610 DRIVE GP-GOVERNOR & FUEL PUMP
 

#SEBP26580330
 

177-8807: DRIVE GP-GOVERNOR & FUEL PUMP

177-8807 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 4TB6819-UP
i01199474 SEBP2658
1778807 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3958 [4] BOLT-SOCKET HEAD (1/4-20X2.5-IN)  
2. 9X-7715 [1] SEAL-QUAD RING  
3. 1W-5438 [1] SPOOL  
4. 4W-0435 [1] SEAL-QUAD RING  
5. 4P-1368 [1] CARRIER-DRIVE  
6. 4P-1369 [1] BODY-VALVE  
7. 7W-3218 [1] RING-GUIDE  
8. 5H-0793 [1] RING-LOCK  
9. 6V-7543 [4] BOLT-12 POINT HEAD (3/8-16X3.25-IN)  
10. 4N-2927 [1] RACE-THRUST BEARING  
11. 009-3101 [1] RING-RETAINING  
12. 8T-7893 [4] BOLT (1/4-20X0.87-IN)  
13. 1W-5427 [1] SPRING  
14. 3K-3467 [1] NUT (7/8-20-THD)  
15. 7W-7663 [1] SCREW-ADJUSTMENT  
16. 3E-4301 [1] SETSCREW-SOCKET  
17. 8L-5832 [1] NUT-HEX (10-32-THD)  
18. 4P-1358 [1] SPRING  
19. 7N-7264 [4] WEIGHT-GOVERNOR  
20. 1S-5440 [4] DOWEL  
21. 1W-5434 [1] CARRIER-WEIGHT  
22. 1W-5441 [1] RETAINER AS-SPRING  
  9V-7451 [4] NUT-WELD (1/4-20-THD)  
23. 1W-5431 [1] RING-DRIVE  
24. 7W-0993 [1] GEAR-PUMP DRIVE (64-TEETH)  
25. 4W-4616 [1] SEAL-QUAD RING  
26. 4W-4617 [1] PLUG  
 

#SEBP26580331
 

1W-6378: DRIVE GP-GOVERNOR & FUEL PUMP

1W-6378 DRIVE GP-GOVERNOR & FUEL PUMP
i03611523 SEBP2658
1W6378 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-0993 [1] GEAR-PUMP DRIVE (64-TEETH)  
2. 4W-0435 [1] SEAL-QUAD RING  
3. 0S-1594 [4] BOLT (3/8-16X1-IN)  
4. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
5. 1W-6382 [1] COVER  
6. 3S-0127 [4] BOLT-12 POINT HEAD (3/8-16X2.25-IN)  
7. 4P-4258 C [1] RING-DRIVE  
8. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 4W-4616 [1] SEAL-QUAD RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP26580332
 

4P-1925: DRIVE GP-GOVERNOR & FUEL PUMP

4P-1925 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 4TB4214-UP
i00374284 SEBP2658
4P1925 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-0993 [1] GEAR-PUMP DRIVE (64-TEETH)  
2. 100-2848 [1] RING-GUIDE  
3. 132-7446 [1] CARRIER AS  
3A. 0T-0200 [1] PLUG-CUP  
3B. 4W-2754 [1] SEAL-QUAD RING  
3C. 061-7540 [1] SEAL-O-RING  
4. 0T-0065 [8] BOLT (3/8-16X3.5-IN)  
5. 100-2851 [1] RING-DRIVE  
6. 9X-7715 [1] SEAL-QUAD RING  
7. 6V-7698 [8] BOLT (1/4-20X3.25-IN)  
8. 1B-4427 [8] NUT-JAM (1/4-20-THD)  
9. 4W-2754 [1] SEAL-QUAD RING  
10. 132-7444 [1] CARRIER-WEIGHT  
11. 1S-5440 [4] DOWEL  
12. 119-2130 [4] WEIGHT-GOVERNOR  
13. 4P-8248 [1] SPRING  
14. 3K-3467 [1] NUT (7/8-20-THD)  
15. 4P-1638 [1] SCREW  
16. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
17. 8L-5832 [1] NUT-HEX (10-32-THD)  
18. 8C-9034 [4] BOLT (10-24X1-IN)  
19. 009-3101 [1] RING-RETAINING  
20. 4P-7690 [2] RACE-FLYWEIGHT  
21. 9Y-7450 [2] RETAINER  
22. 4P-7691 [1] SPOOL-ADVANCE  
23. 100-2847 [1] COVER-FLYWEIGHT  
24. 100-2849 [1] PLATE  
25. 4P-3337 [1] RACE-FLYWEIGHT  
26. 8T-9394 [4] BOLT-SOCKET HEAD (10-24X0.5-IN)  
 

#SEBP26580333
 

9N-6610: DRIVE GP-GOVERNOR & FUEL PUMP

9N-6610 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 4TB3482-4197
i00439214 SEBP2658
9N6610 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3958 [4] BOLT-SOCKET HEAD (1/4-20X2.5-IN)  
2. 9X-7715 [1] SEAL-QUAD RING  
3. 1W-5438 [1] SPOOL  
4. 4W-0435 [1] SEAL-QUAD RING  
5. 4W-4617 [1] PLUG  
6. 4P-1369 [1] BODY-VALVE  
7. 4P-1368 [1] CARRIER-DRIVE  
8. 7W-3218 [1] RING-GUIDE  
9. 5H-0793 [1] RING-LOCK  
10. 6V-7543 C [4] BOLT-12 POINT HEAD (3/8-16X3.25-IN)  
11. 009-3101 [1] RING-RETAINING  
12. 8T-7893 C [4] BOLT (1/4-20X0.87-IN)  
13. 1W-5427 [1] SPRING  
14. 3K-3467 [1] NUT (7/8-20-THD)  
  4W-8011 C [1] SCREW-ADJUSTMENT (39.50MM LG)  
    -OR-
  3K-3467 C [1] NUT (7/8-20-THD)(9.52MM THK)  
  7W-7663 C [1] SCREW-ADJUSTMENT (56.10MM LG)  
15. 4W-4616 [1] SEAL-QUAD RING  
16. 3E-4301 [1] SETSCREW-SOCKET  
17. 8L-5832 [1] NUT-HEX (10-32-THD)  
18. 4P-4367 [1] SPRING  
19. 7N-7264 [4] WEIGHT-GOVERNOR  
20. 1S-5440 [4] DOWEL  
21. 1W-5434 [1] CARRIER-WEIGHT  
22. 1W-5441 [1] RETAINER AS-SPRING  
23. 9V-7451 [2] NUT-WELD (1/4-20-THD)  
24. 1W-5431 [1] RING-DRIVE  
25. 7W-0993 C [1] GEAR-PUMP DRIVE (64-TEETH)  
26. 4N-2927 [1] RACE-THRUST BEARING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP26580334
 

1W-8235: DRIVE GP-TACHOMETER

1W-8235 DRIVE GP-TACHOMETER
SINGLE
i00353722 SEBP2658
1W8235 DRIVE GP-TACHOMETER Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4581 [1] ADAPTER AS  
2. 9S-0211 [2] CLAMP-METER  
3. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
4. 4M-8303 [1] SEAL-O-RING  
5. 4N-0538 [1] COUPLING  
6. 4M-8303 B [1] SEAL-O-RING  
  B   USE AS REQUIRED
 

#SEBP26580335
 

4W-1101: DRIVE GP-TACHOMETER

4W-1101 DRIVE GP-TACHOMETER
DUAL
CANNOT BE USED WITH WOODWARD GOVERNOR
AN ATTACHMENT
i00378540 SEBP2658
4W1101 DRIVE GP-TACHOMETER Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4580 [1] ADAPTER AS  
2. 9S-0211 [2] CLAMP-METER  
3. 8H-3128 [2] BOLT-SOCKET HEAD (1/4-20X0.625-IN)  
4. 4M-8303 [2] SEAL-O-RING  
5. 4N-0538 [1] COUPLING  
6. 7M-7644 [2] CAP-PROTECTION  
 

#SEBP26580336
 

1W-7376: FASTENER GP-FUEL INJ PUMP

1W-7376 FASTENER GP-FUEL INJ PUMP -ENGINE
i00121991 SEBP2658
1W7376 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
2. 5P-0076 [1] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
3. 034-4288 [2] BOLT-12 POINT HEAD (3/8-16X1.125-IN)  
4. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
5. 6V-3319 [1] SEAL-O-RING  
6. 5P-5846 [1] SEAL-O-RING  
7. 2N-3350 [1] SEAL-O-RING  
8. 1C-2251 [1] BOLT (3/8-16X1.87-IN)  
 

#SEBP26580337
 

9Y-4913: FASTENER GP-FUEL INJ PUMP

9Y-4913 FASTENER GP-FUEL INJ PUMP -GOVERNOR
PART OF 110-8895, 110-8896, 178-1725, 178-1728, 2W-6193, 7W-6071, 8N-9675 PUMP GP-GOV & FUEL INJ
i00122914 SEBP2658
9Y4913 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5894 [4] BOLT (1/4-20X3.75-IN)  
2. 7B-2742 [2] BOLT (1/4-20X1.25-IN)  
3. 8S-4710 [4] BOLT (1/4-20X4-IN)  
4. 1B-2716 [2] BOLT (1/4-20X5-IN)  
5. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
6. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
7. 7X-0869 [1] BOLT-LOCKING (1/4-20X2-IN)  
8. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#SEBP26580338
 

5R-5020: FILTER & LINES GP-FUEL

5R-5020 FILTER & LINES GP-FUEL
AN ATTACHMENT
i02424914 SEBP2658
5R5020 FILTER & LINES GP-FUEL Parts scheme 5R5020 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 032-1267 [1] CONNECTOR (STRAIGHT)  
2. 3J-1907 [5] SEAL-O-RING  
3. 032-1268 [3] CONNECTOR (90-DEG)  
4. 5R-1453 J [1] FILTER AS-FUEL  
  3R-2251 [1] FILTER ELEMENT-FUEL  
5. 030-7947 [3] ADAPTER-ELBOW  
6. 1D-4717 [4] NUT (3/8-16-THD)  
7. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 2M-4779 [2] STUD-TAPERLOCK (3/8-16X1.75-IN)  
9. 5R-5406 [1] TUBE AS  
10. 1B-4330 [3] NUT (1/4-20-THD)  
11. 5P-0537 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
13. 5M-5926 [4] CLAMP  
14. 5R-5084 [1] TUBE AS  
15. 2R-6806 [2] CONNECTOR (FLARED)  
16. 2W-3454 [1] TUBE AS  
17. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
18. 0S-1590 [1] BOLT (3/8-16X2-IN)  
19. 2W-3455 [1] BRACKET  
20. 9M-1974 B [2] WASHER-HARD (8.8X16X2-MM THK)  
21. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
22. 2W-3453 [1] TUBE AS  
23. 2B-2694 B [2] BOLT (5/16-18X2-IN)  
24. 1D-4716 [3] NUT-FULL (5/16-18-THD)  
25. 2W-3456 [1] JUNCTION BLOCK  
26. 1B-2714 [1] BOLT (1/4-20X2.5-IN)  
27. 137-5541 [1] PUMP GP-FUEL PRIMING  
28. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
29. 5R-3564 [1] BLOCK  
30. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
31. 5R-5404 [1] BRACKET  
32. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
33. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
34. 5R-5405 [1] TUBE AS  
35. 2B-2694 [1] BOLT (5/16-18X2-IN)  
   
    AVAILABLE REPAIR KIT(S):
  349-5174 AJY [1] FILTER GP-WATER SEP & FUEL  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J IS A SERVICE REPLACEMENT FOR PART MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP26580339
 

4N-1981: FILTER GP-FUEL

4N-1981 FILTER GP-FUEL -ENGINE
i00107917 SEBP2658
4N1981 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3789 C [1] BASE AS-FILTER (FUEL)  
2. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3. 1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/16
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/12
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Over Fueling Spring No Longer Used In Governor
1985/03/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Special Instruction Available To Salvage Governor Housing
1985/08/01
Fuel Transfer Pump Improved
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/10/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
Fuel Injection Pump Improvements{1251}
1994/02/01
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
New Governor Weight And Race Increase Durability {1264}
1996/09/23
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Controls
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Linkage
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor and Fuel Pump Drive Group
3406C INDUSTRIAL & MARINE ENGINES
Governor Control
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Asia
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Service Letter-APD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL
Disassembly and Assembly
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor
3406B INDUSTRIAL & MARINE ENGINES
Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor Drive
3406C INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
Special Instruction Available To Salvage Governor Housing{1287}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
FT Tooling Prints Available For Bushing Installation In Governor Housing{0600,1287}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
Fuel Injection Pump Improvements{1251}
1994/02/07

Caterpillar Parts SIS Catalog 3406B :

DRAIN GP-FUEL
4W-0423 DRAIN GP-FUEL
COVER GP-FUEL TRANSFER
4W-1727 COVER GP-FUEL TRANSFER
CONTROL GP-GOVERNOR
5N-9337 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3830 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3828 CONTROL GP-GOVERNOR
3N-9158 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
1W-7413 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
1W-7412 CONTROL GP-GOVERNOR
DRIVE GP-GOVERNOR & FUEL PUMP
1W-6378 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
4P-1925 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
9N-6610 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-TACHOMETER
1W-8235 DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
4W-1101 DRIVE GP-TACHOMETER
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
9Y-4913 FASTENER GP-FUEL INJ PUMP
FILTER & LINES GP-FUEL
5R-5020 FILTER & LINES GP-FUEL

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.