AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

173-9137 PUMP GP-FUEL INJECTION S/N 5YS1-14381 Type 2 ALSO AN ATTACHMENT 3054 INDUSTRIAL ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION

INDUSTRIAL ENGINE 3054 INDUSTRIAL ENGINE 5YS
 3054 Industrial Engine 5YS00001-UP SEBP2666 3054 5YS   (1997)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
166-5248 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
173-9137 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
173-9137 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
173-9137 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
175-7778 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
175-7778 PUMP GP-FUEL INJECTION
 

#SEBP26661040
 

173-9137: PUMP GP-FUEL INJECTION

173-9137 PUMP GP-FUEL INJECTION
S/N 5YS1-14381
Type 2
ALSO AN ATTACHMENT
i01366228 SEBP2666
1739137 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0291 M [4] NUT (M8X1.25-THD)  
3. 067-6998 [1] NUT (3/8-24-THD)  
4. 067-6999 [1] FERRULE  
5. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
6. 173-7527 [1] SWITCH AS-TEMPERATURE (TIMING ADVANCE)  
7. 124-3713 [1] CONNECTION  
8. 124-3714 [3] BOLT  
9. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
10. 140-8713 [2] CLIP  
11. 140-8714 [1] CLIP  
12. 140-8718 [4] WASHER  
13. 140-8719 [1] LINE-LEAKOFF  
14. 140-8720 [8] WASHER  
15. 154-6016 [1] GEAR-PUMP (56-TEETH)  
16. 142-4248 [1] BRACKET  
17. 170-2377 [1] CAP  
18. 185-6374 [1] TUBE AS  
19. 193-0160 CY [1] PUMP GP-FUEL INJECTION  
20. 152-3935 [4] INJECTOR GP-FUEL  
    (EACH INCLUDES)
  147-6240 [1] HOLDER  
20A. 152-3937 [1] NOZZLE  
21. 154-6015 [3] STUD  
22. 170-0580 [1] TUBE AS (CYLINDER ONE)  
23. 170-0581 [1] TUBE AS (CYLINDER TWO)  
24. 170-0582 [1] TUBE AS (CYLINDER THREE)  
25. 170-0583 [1] TUBE AS (CYLINDER FOUR)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26661041
 

173-9137: PUMP GP-FUEL INJECTION

173-9137 PUMP GP-FUEL INJECTION
S/N 5YS14382-UP
ALSO AN ATTACHMENT
i02210186 SEBP2666
1739137 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0291 M [4] NUT (M8X1.25-THD)  
3. 067-6998 [1] NUT (3/8-24-THD)  
4. 067-6999 [1] FERRULE  
5. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
6. 173-7527 [1] SWITCH AS-TEMPERATURE (TIMING ADVANCE)  
7. 247-9855 C [1] BOLT (M6X1X30-MM)  
8. 247-9844 C [3] BOLT (M6X1X16-MM)  
9. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
10. 140-8713 [2] CLIP  
11. 140-8714 [1] CLIP  
12. 140-8718 [4] WASHER  
13. 140-8719 [1] LINE-LEAKOFF  
14. 241-4754 C [8] WASHER (6.35X9.75X1.55-MM THK)  
15. 154-6016 [1] GEAR-PUMP (56-TEETH)  
16. 142-4248 [1] BRACKET  
17. 205-3620 [1] CAP (MAX FUEL)  
18. 185-6374 [1] TUBE AS  
18A. 067-6999 [1] FERRULE  
18B. 106-8835 [1] NUT  
19. 193-0160 Y [1] PUMP GP-FUEL INJECTION  
20. 152-3935 [4] INJECTOR GP-FUEL  
    (EACH INCLUDES)
  147-6240 [1] HOLDER  
20A. 152-3937 [1] NOZZLE  
21. 154-6015 [3] STUD  
22. 170-0580 [1] TUBE AS (CYLINDER ONE)  
23. 170-0581 [1] TUBE AS (CYLINDER TWO)  
24. 170-0582 [1] TUBE AS (CYLINDER THREE)  
25. 170-0583 [1] TUBE AS (CYLINDER FOUR)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26661042
 

175-7778: PUMP GP-FUEL INJECTION

175-7778 PUMP GP-FUEL INJECTION
S/N 5YS1-14381
ALSO AN ATTACHMENT
i01227249 SEBP2666
1757778 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 D LOCKWIRE (1-M)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 035-8017 [1] UNION  
4. 365-3308 [1] NUT-COMPRESSION  
5. 067-6265 [1] FITTING-BRASS  
6. 067-7006 [1] SEAL  
7. 107-2348 [2] CLIP  
8. 154-8055 [1] HOSE  
10. 124-3713 [1] CONNECTION  
11. 124-3714 [3] BOLT  
12. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
13. 140-8713 [2] CLIP  
14. 140-8714 [1] CLIP  
15. 140-8718 [4] WASHER  
16. 140-8719 [1] LINE-LEAKOFF  
17. 204-7853 [8] WASHER  
18. 141-6189 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
18A. 154-6017 [1] HOLDER  
19. 141-6190 [1] NOZZLE  
20. 145-8657 [1] TUBE AS  
20A. 101-3986 [1] CLIP  
21. 101-3877 [3] STUD (M8X1.25X37-MM)  
22. 154-6016 [1] GEAR-PUMP (56-TEETH)  
23. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
24. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
25. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
26. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
27. 169-5326 [1] SWITCH-TEMPERATURE  
28. 176-0353 [1] PUMP GP-FUEL INJECTION  
30. 161-2161 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP26661043
 

175-7778: PUMP GP-FUEL INJECTION

175-7778 PUMP GP-FUEL INJECTION
S/N 5YS14382-UP
ALSO AN ATTACHMENT
i02210221 SEBP2666
1757778 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 D LOCKWIRE (1-M)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 035-8017 [1] UNION  
4. 365-3308 [1] NUT-COMPRESSION  
5. 067-6265 [1] FITTING-BRASS  
6. 067-7006 [1] SEAL  
7. 107-2348 [2] CLIP  
8. 154-8055 [1] HOSE  
10. 247-9855 C [1] BOLT (M6X1X30-MM)  
11. 247-9844 C [3] BOLT (M6X1X16-MM)  
12. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
13. 140-8713 [2] CLIP  
14. 140-8714 [1] CLIP  
15. 140-8718 [4] WASHER  
16. 140-8719 [1] LINE-LEAKOFF  
17. 241-4754 C [8] WASHER (6.35X9.75X1.55-MM THK)  
18. 141-6189 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
18A. 154-6017 [1] HOLDER  
19. 141-6190 [1] NOZZLE  
20. 145-8657 [1] TUBE AS  
20A. 101-3986 [1] CLIP  
21. 101-3877 [3] STUD (M8X1.25X37-MM)  
22. 154-6016 [1] GEAR-PUMP (56-TEETH)  
23. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
24. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
25. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
26. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
27. 169-5326 [1] SWITCH-TEMPERATURE (FUEL)  
28. 176-0353 [1] PUMP GP-FUEL INJECTION  
30. 161-2161 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP26661044
 

176-3140: PUMP GP-FUEL INJECTION

176-3140 PUMP GP-FUEL INJECTION
PART OF 224-3985 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i01837489 SEBP2666
1763140 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0291 M [1] NUT (M8X1.25-THD)  
3. 142-4248 [1] BRACKET  
4. 152-3968 [1] SEAL-O-RING  
5. 176-6219 [1] SOLENOID (12-VOLT)(FUEL SHUTOFF)  
6. 193-0161 [1] CABLE AS-ADAPTER (FUEL INJECTION PUMP)  
  M   METRIC PART
 

#SEBP26661045
 

180-6373: PUMP GP-FUEL INJECTION

180-6373 PUMP GP-FUEL INJECTION
S/N 5YS1-14381
ALSO AN ATTACHMENT
i01333339 SEBP2666
1806373 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 033-7625 [1] ELBOW  
3. 365-3308 [1] NUT-COMPRESSION  
4. 067-6265 [1] FITTING-BRASS  
5. 067-7006 [1] SEAL  
6. 107-2348 [2] CLIP  
8. 124-3713 [1] CONNECTION  
9. 124-3714 [3] BOLT  
10. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
11. 140-8713 [2] CLIP  
12. 140-8714 [1] CLIP  
13. 140-8715 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
14. 140-8716 [1] HOLDER  
15. 140-8717 [1] NOZZLE  
16. 140-8718 [4] WASHER  
17. 140-8719 [1] LINE-LEAKOFF  
18. 204-7853 [8] WASHER  
19. 142-5070 [1] TUBE AS  
20. 101-3877 [3] STUD (M8X1.25X37-MM)  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 154-8055 [1] HOSE  
23. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
24. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
25. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
26. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
27. 169-5326 [1] SWITCH-TEMPERATURE  
28. 180-6372 [1] PUMP GP-FUEL INJECTION  
28A. 192-9155 [1] CONTROL AS-FUEL RATIO  
28B. 116-8648 [2] RING  
30. 161-2161 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26661046
 

180-6373: PUMP GP-FUEL INJECTION

180-6373 PUMP GP-FUEL INJECTION
S/N 5YS14382-UP
ALSO AN ATTACHMENT
i02210245 SEBP2666
1806373 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 033-7625 [1] ELBOW  
3. 365-3308 [1] NUT-COMPRESSION  
4. 067-6265 [1] FITTING-BRASS  
5. 067-7006 [1] SEAL  
6. 107-2348 [2] CLIP  
8. 247-9855 C [1] BOLT (M6X1X30-MM)  
9. 247-9844 C [3] BOLT (M6X1X16-MM)  
10. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
11. 140-8713 [2] CLIP  
12. 140-8714 [1] CLIP  
13. 140-8715 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
14. 140-8716 [1] HOLDER  
15. 140-8717 [1] NOZZLE  
16. 140-8718 [4] WASHER  
17. 140-8719 [1] LINE-LEAKOFF  
18. 241-4754 C [8] WASHER (6.35X9.75X1.55-MM THK)  
19. 142-5070 [1] TUBE AS  
20. 101-3877 [3] STUD (M8X1.25X37-MM)  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 154-8055 [1] HOSE  
23. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
24. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
25. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
26. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
27. 169-5326 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
28. 180-6372 [1] PUMP GP-FUEL INJECTION  
28A. 192-9155 [1] CONTROL AS-FUEL RATIO  
28B. 8D-5294 [2] RING  
  116-8645 [1] NUT  
30. 161-2161 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26661047
 

180-7189: PUMP GP-FUEL INJECTION

180-7189 PUMP GP-FUEL INJECTION
S/N 5YS1-14381
ALSO AN ATTACHMENT
i01182784 SEBP2666
1807189 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 033-7625 [1] ELBOW  
3. 365-3308 [1] NUT-COMPRESSION  
4. 067-6265 [1] FITTING-BRASS  
5. 067-7006 [1] SEAL  
6. 107-2348 [2] CLIP  
8. 124-3713 [1] CONNECTION  
9. 124-3714 [3] BOLT  
10. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
11. 140-8713 [2] CLIP  
12. 140-8714 [1] CLIP  
13. 140-8715 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
14. 140-8716 [1] HOLDER  
15. 140-8717 [1] NOZZLE  
16. 140-8718 [4] WASHER  
17. 140-8719 [1] LINE-LEAKOFF  
18. 204-7853 [8] WASHER  
19. 142-5070 [1] TUBE AS  
20. 101-3877 [3] STUD (M8X1.25X37-MM)  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 154-8055 [1] HOSE  
23. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
24. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
25. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
26. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
27. 169-5326 [1] SWITCH-TEMPERATURE  
28. 180-7188 [1] PUMP GP-FUEL INJECTION  
28A. 192-9155 [1] CONTROL AS-FUEL RATIO  
28B. 116-8648 [2] RING  
28C. 116-8645 [1] NUT  
30. 161-2161 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26661048
 

180-7189: PUMP GP-FUEL INJECTION

180-7189 PUMP GP-FUEL INJECTION
S/N 5YS14382-UP
ALSO AN ATTACHMENT
i02211117 SEBP2666
1807189 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 033-7625 [1] ELBOW  
3. 365-3308 [1] NUT-COMPRESSION  
4. 067-6265 [1] FITTING-BRASS  
5. 067-7006 [1] SEAL  
6. 107-2348 [2] CLIP  
8. 247-9855 C [1] BOLT (M6X1X30-MM)  
9. 247-9844 C [3] BOLT (M6X1X16-MM)  
10. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
11. 140-8713 [2] CLIP  
12. 140-8714 [1] CLIP  
13. 140-8715 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
14. 140-8716 [1] HOLDER  
15. 140-8717 [1] NOZZLE  
16. 140-8718 [4] WASHER  
17. 140-8719 [1] LINE-LEAKOFF  
18. 241-4754 C [8] WASHER (6.35X9.75X1.55-MM THK)  
19. 142-5070 [1] TUBE AS  
20. 101-3877 [3] STUD (M8X1.25X37-MM)  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 154-8055 [1] HOSE  
23. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
24. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
25. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
26. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
27. 169-5326 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
28. 180-7188 [1] PUMP GP-FUEL INJECTION  
28A. 192-9155 [1] CONTROL AS-FUEL RATIO  
28B. 8D-5294 [2] RING  
28C. 116-8645 [1] NUT  
30. 161-2161 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26661049
 

183-7214: PUMP GP-FUEL INJECTION

183-7214 PUMP GP-FUEL INJECTION
S/N 5YS1-14381
ALSO AN ATTACHMENT
i01325476 SEBP2666
1837214 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 D LOCKWIRE (0.1M)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 033-7625 [1] ELBOW  
4. 365-3308 [1] NUT-COMPRESSION  
5. 067-6265 [1] FITTING-BRASS  
6. 067-7006 [1] SEAL  
7. 107-2348 [2] CLIP  
8. 124-3713 [1] CONNECTION  
9. 124-3714 [3] BOLT  
10. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
11. 140-8713 [2] CLIP  
12. 140-8714 [1] CLIP  
13. 140-8715 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
13A. 140-8716 [1] HOLDER  
13B. 140-8717 [1] NOZZLE  
14. 140-8718 [4] WASHER  
15. 140-8719 [1] LINE-LEAKOFF  
16. 204-7853 [8] WASHER  
17. 142-5070 [1] TUBE AS  
18. 147-1735 Y [1] PUMP GP-FUEL INJECTION  
19. 169-5326 [1] SWITCH-TEMPERATURE  
20. 101-3877 [3] STUD (M8X1.25X37-MM)  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 154-8055 [1] HOSE  
23. 162-0807 [1] LEAD  
24. 162-8575 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
25. 162-8576 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
26. 162-8577 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
27. 162-8578 [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
   
  102-9909 FM [1] STUD (M10X1.5X25-MM)  
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
O-Ring Seal For Fuel Injection Pump Groups Is Now Serviced {1251}
1998/11/01
Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/01
Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}
1999/01/01
Cold Start Advance Solenoid Available{1272,1250}
1999/08/01
Remanufactured Stanadyne Fuel Injection Pumps are Available for 3054 and 3056 Engines {1251}
2000/11/01
Replacement of the Fuel Ratio Control Diaphragm {1251, 1278}
2003/12/01
Improvement to the Fuel Injection Pump {1251}
2008/09/01
Support for Fuel Injection Pumps {1251}
2008/07/14
Delphi Fuel Injection Pumps on 3054, 3056, 3054B, 3054C, C3.3, C4.4 (MECH), and C7.1 (MECH)Engines {1251}
2013/07/30
Operation and Maintenance Manual
Fuel Injection Nozzles - Test/Exchange
3054 and 3056 Industrial and Generator Set Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
O-Ring Seal Between Drive End Of Fuel Injection Pump And Back Side Of Front Housing
O-Ring Seal Between Drive End Of Fuel Injection Pump And Back Side Of Front Housing
REPLACEMENT OF THE FUEL RATIO CONTROL DIAPHRAGM
REPLACEMENT OF THE FUEL RATIO CONTROL DIAPHRAGM
Specifications
Fuel Injection Pump
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Nozzles
3054 and 3056 Industrial and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Timing - Check
3054 and 3056 Industrial and Generator Set Engines
Disassembly and Assembly
Fuel Injection Nozzles - Remove
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Nozzles - Install
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Pump - Remove
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Pump - Install
3054 and 3056 Industrial and Generator Set Engines
Service Magazine
Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08
Ferrule For Valve Mechanism Oil Feed {1102}
1999/11/22
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3054 :

PUMP GP-FUEL INJECTION
173-9137 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
166-5248 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
166-5248 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
161-4492 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
161-4492 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
161-4487 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
161-4487 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
161-4487 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
173-9137 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
175-7778 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
175-7778 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
176-3140 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
180-6373 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
180-6373 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
180-7189 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
180-7189 PUMP GP-FUEL INJECTION

Truck sale:

CAT 3054
 
CAT 3054

Müller & Co. Equipment Ltd.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.