AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

195-3707 PUMP GP-FUEL INJECTION S/N 5YS1-14381 ALSO AN ATTACHMENT 3054 INDUSTRIAL ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION

INDUSTRIAL ENGINE 3054 INDUSTRIAL ENGINE 5YS
 3054 Industrial Engine 5YS00001-UP SEBP2666 3054 5YS   (1997)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
187-1750 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
193-0160 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
195-3707 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
195-3707 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
198-4103 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
198-4103 PUMP GP-FUEL INJECTION
 

#SEBP26661060
 

195-3707: PUMP GP-FUEL INJECTION

195-3707 PUMP GP-FUEL INJECTION
S/N 5YS1-14381
ALSO AN ATTACHMENT
i01373646 SEBP2666
1953707 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 033-7625 [1] ELBOW  
3. 365-3308 [1] NUT-COMPRESSION  
4. 067-6265 [1] FITTING-BRASS  
5. 067-7006 [1] SEAL  
6. 107-2348 [2] CLIP  
8. 124-3713 [1] CONNECTION  
9. 124-3714 [3] BOLT  
10. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
11. 140-8713 [2] CLIP  
12. 140-8714 [1] CLIP  
13. 140-8715 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
14. 140-8716 [1] HOLDER  
15. 140-8717 [1] NOZZLE  
16. 140-8718 [4] WASHER  
17. 140-8719 [1] LINE-LEAKOFF  
18. 140-8720 [8] WASHER  
19. 186-6400 [1] TUBE AS  
19A. 101-3986 [1] CLIP  
20. 154-6015 [3] STUD  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 154-8055 [1] HOSE  
23. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
24. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
25. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
26. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
27. 169-5326 [1] SWITCH-TEMPERATURE  
28. 180-7188 [1] PUMP GP-FUEL INJECTION  
28A. 192-9155 [1] CONTROL AS-FUEL RATIO  
28B. 116-8648 [2] RING  
28C. 116-8645 [1] NUT  
30. 161-2161 [1] SEAL-O-RING  
31. 5P-6627 [1] LOCKWIRE  
32. 186-6432 [1] CABLE  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26661061
 

195-3707: PUMP GP-FUEL INJECTION

195-3707 PUMP GP-FUEL INJECTION
S/N 5YS14382-UP
AN ATTACHMENT
i02212151 SEBP2666
1953707 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [3] NUT (M8X1.25-THD)  
2. 033-7625 [1] ELBOW  
3. 365-3308 [1] NUT-COMPRESSION  
4. 067-6265 [1] FITTING-BRASS  
5. 067-7006 [1] SEAL  
6. 107-2348 [2] CLIP  
8. 247-9855 C [1] BOLT (M6X1X30-MM)  
9. 247-9844 C [3] BOLT (M6X1X16-MM)  
10. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
11. 140-8713 [2] CLIP  
12. 140-8714 [1] CLIP  
13. 140-8715 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
14. 140-8716 [1] HOLDER  
15. 140-8717 [1] NOZZLE  
16. 140-8718 [4] WASHER  
17. 140-8719 [1] LINE-LEAKOFF  
18. 241-4754 C [8] WASHER (6.35X9.75X1.55-MM THK)  
19. 186-6400 [1] TUBE AS  
19A. 101-3986 [1] CLIP  
20. 154-6015 [3] STUD  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 154-8055 [1] HOSE  
23. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
24. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
25. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
26. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
27. 169-5326 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
28. 180-7188 [1] PUMP GP-FUEL INJECTION  
28A. 192-9155 [1] CONTROL AS-FUEL RATIO  
28B. 116-8648 [2] RING  
28C. 116-8645 [1] NUT  
30. 161-2161 [1] SEAL-O-RING  
31. 5P-6627 [1] LOCKWIRE  
32. 186-6432 [1] CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26661062
 

198-4103: PUMP GP-FUEL INJECTION

198-4103 PUMP GP-FUEL INJECTION
S/N 5YS1-25912
ALSO AN ATTACHMENT
i01529256 SEBP2666
1984103 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-6015 [3] STUD  
2. 6I-0291 M [4] NUT (M8X1.25-THD)  
3. 033-7625 [1] ELBOW  
4. 365-3308 [1] NUT-COMPRESSION  
5. 067-6265 [1] FITTING-BRASS  
6. 142-4248 [1] BRACKET  
7. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
8. 067-6998 [1] NUT (3/8-24-THD)  
9. 067-6999 [1] FERRULE  
12. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
13. 124-3713 [1] CONNECTION  
14. 124-3714 [3] BOLT  
15. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
16. 140-8713 [2] CLIP  
17. 140-8714 [1] CLIP  
18. 140-8718 [4] WASHER  
19. 140-8719 [1] LINE-LEAKOFF  
20. 140-8720 [8] WASHER  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 170-0580 [1] TUBE AS (CYLINDER ONE)  
23. 198-9224 [1] TUBE AS (CYLINDER TWO)  
24. 170-0582 [1] TUBE AS (CYLINDER THREE)  
25. 170-0583 [1] TUBE AS (CYLINDER FOUR)  
26. 170-2377 [1] CAP  
27. 173-7527 [1] SWITCH AS-TEMPERATURE (TIMING ADVANCE)  
28. 185-5757 [1] CABLE  
29. 185-6374 [1] TUBE AS  
30. 187-1964 [1] TUBE AS-AIR  
31. 187-1749 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
32. 198-4101 [1] HOLDER  
33. 198-4102 [1] NOZZLE  
34. 198-4100 [1] PUMP GP-FUEL INJECTION  
35. 7W-6249 [1] SOLENOID AS-SHUTOFF (12-VOLT)(FUEL)  
36. 5N-0094 [1] SEAL  
37. 152-3968 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26661063
 

198-4103: PUMP GP-FUEL INJECTION

198-4103 PUMP GP-FUEL INJECTION
S/N 5YS25913-UP
ALSO AN ATTACHMENT
i02212231 SEBP2666
1984103 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3877 [3] STUD (M8X1.25X37-MM)  
2. 6I-0291 M [4] NUT (M8X1.25-THD)  
3. 033-7625 [1] ELBOW  
4. 365-3308 [1] NUT-COMPRESSION  
5. 067-6265 [1] FITTING-BRASS  
6. 142-4248 [1] BRACKET  
7. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
8. 067-6998 [1] NUT (3/8-24-THD)  
9. 067-6999 [1] FERRULE  
12. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
13. 247-9855 C [1] BOLT (M6X1X30-MM)  
14. 247-9844 C [3] BOLT (M6X1X16-MM)  
15. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
16. 140-8713 [2] CLIP  
17. 140-8714 [1] CLIP  
18. 140-8718 [4] WASHER  
19. 140-8719 [1] LINE-LEAKOFF  
20. 241-4754 C [8] WASHER (6.35X9.75X1.55-MM THK)  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 170-0580 [1] TUBE AS (CYLINDER ONE)  
23. 198-9224 [1] TUBE AS (CYLINDER TWO)  
24. 170-0582 [1] TUBE AS (CYLINDER THREE)  
25. 170-0583 [1] TUBE AS (CYLINDER FOUR)  
26. 205-3620 [1] CAP (MAX FUEL)  
27. 173-7527 [1] SWITCH AS-TEMPERATURE (TIMING ADVANCE)  
28. 185-5757 [1] CABLE  
29. 185-6374 [1] TUBE AS  
30. 187-1964 [1] TUBE AS-AIR  
31. 187-1749 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
32. 198-4101 [1] HOLDER  
33. 198-4102 [1] NOZZLE  
34. 198-4100 [1] PUMP GP-FUEL INJECTION  
35. 7W-6249 [1] SOLENOID AS-SHUTOFF (12-VOLT)(FUEL)  
36. 5N-0094 [1] SEAL  
37. 152-3968 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26661064
 

198-4283: PUMP GP-FUEL INJECTION

198-4283 PUMP GP-FUEL INJECTION
S/N 5YS1-14381
ALSO AN ATTACHMENT
i01507247 SEBP2666
1984283 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3877 [1] STUD (M8X1.25X37-MM)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 033-7625 [1] ELBOW  
4. 365-3308 [1] NUT-COMPRESSION  
5. 067-6265 [1] FITTING-BRASS  
6. 067-6300 [2] DAMPER  
7. 067-6301 [2] PLATE  
8. 067-6998 [1] NUT (3/8-24-THD)  
9. 067-6999 [1] FERRULE  
11. 101-3908 [1] BOLT  
12. 101-3909 [1] LOCKNUT (M5-THD)  
13. 124-3713 [1] CONNECTION  
14. 124-3714 [3] BOLT  
15. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
16. 140-8713 [2] CLIP  
17. 140-8714 [1] CLIP  
18. 140-8718 [4] WASHER  
19. 140-8719 [1] LINE-LEAKOFF  
20. 140-8720 [8] WASHER  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 170-0580 [1] TUBE AS (CYLINDER ONE)  
23. 170-0581 [1] TUBE AS (CYLINDER TWO)  
24. 170-0582 [1] TUBE AS (CYLINDER THREE)  
25. 170-0583 [1] TUBE AS (CYLINDER FOUR)  
26. 170-2377 [1] CAP  
27. 173-7527 [1] SWITCH AS-TEMPERATURE (TIMING ADVANCE)  
28. 185-5757 [1] CABLE  
29. 185-6374 [1] TUBE AS  
29A. 067-6999 [1] FERRULE  
29B. 106-8835 [1] NUT  
30. 187-1707 [1] TUBE AS-AIR  
30A. 101-3984 [1] FERRULE  
30B. 106-8835 [1] NUT  
31. 187-1749 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  198-4101 [1] HOLDER  
31A. 198-4102 [1] NOZZLE  
34. 198-4100 [1] PUMP GP-FUEL INJECTION  
34A. 7W-6249 [1] SOLENOID AS-SHUTOFF (12-VOLT)(FUEL)  
34B. 5N-0094 [1] SEAL  
34C. 152-3968 [1] SEAL-O-RING  
  6I-0217 FM [1] BOLT (M8X1.25X20-MM)  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26661065
 

198-4283: PUMP GP-FUEL INJECTION

198-4283 PUMP GP-FUEL INJECTION
S/N 5YS14382-UP
ALSO AN ATTACHMENT
i02212255 SEBP2666
1984283 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3877 [1] STUD (M8X1.25X37-MM)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 033-7625 [1] ELBOW  
4. 365-3308 [1] NUT-COMPRESSION  
5. 067-6265 [1] FITTING-BRASS  
6. 067-6300 [2] DAMPER  
7. 067-6301 [2] PLATE  
8. 067-6998 [1] NUT (3/8-24-THD)  
9. 067-6999 [1] FERRULE  
11. 101-3908 [1] BOLT  
12. 101-3909 [1] LOCKNUT (M5-THD)  
13. 247-9855 C [1] BOLT (M6X1X30-MM)  
14. 247-9844 C [3] BOLT (M6X1X16-MM)  
15. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
16. 140-8713 [2] CLIP  
17. 140-8714 [1] CLIP  
18. 140-8718 [4] WASHER  
19. 140-8719 [1] LINE-LEAKOFF  
20. 241-4754 C [8] WASHER (6.35X9.75X1.55-MM THK)  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 170-0580 [1] TUBE AS (CYLINDER ONE)  
23. 170-0581 [1] TUBE AS (CYLINDER TWO)  
24. 170-0582 [1] TUBE AS (CYLINDER THREE)  
25. 170-0583 [1] TUBE AS (CYLINDER FOUR)  
26. 205-3620 [1] CAP (MAX FUEL)  
27. 173-7527 [1] SWITCH AS-TEMPERATURE (TIMING ADVANCE)  
28. 185-5757 [1] CABLE  
29. 185-6374 [1] TUBE AS  
29A. 067-6999 [1] FERRULE  
29B. 106-8835 [1] NUT  
30. 187-1707 [1] TUBE AS-AIR  
30A. 101-3984 [1] FERRULE  
30B. 106-8835 [1] NUT  
31. 187-1749 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  198-4101 [1] HOLDER  
31A. 198-4102 [1] NOZZLE  
34. 198-4100 [1] PUMP GP-FUEL INJECTION  
34A. 7W-6249 [1] SOLENOID AS-SHUTOFF (12-VOLT)(FUEL)  
34B. 5N-0094 [1] SEAL  
34C. 152-3968 [1] SEAL-O-RING  
  6I-0217 FM [1] BOLT (M8X1.25X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26661066
 

201-4607: PUMP GP-FUEL INJECTION

201-4607 PUMP GP-FUEL INJECTION
PART OF 187-1706, 187-1750 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i01451025 SEBP2666
2014607 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-5511 [1] CAP (TAMPER RESISTANT)  
2. 141-8946 [1] SEAL  
3. 141-8947 [1] THERMOCOUPLE  
  141-8948 [1] SEAL  
4. 165-3811 [2] BOLT  
6. 205-3620 [1] CAP (MAX FUEL)  
7. 176-6219 [1] SOLENOID (12-VOLT)(FUEL SHUTOFF)  
8. 152-3968 [1] SEAL-O-RING  
9. 193-0161 [1] CABLE AS-ADAPTER  
 

#SEBP26661067
 

209-0703: PUMP GP-FUEL INJECTION

209-0703 PUMP GP-FUEL INJECTION
S/N 5YS1-14381
i01547357 SEBP2666
2090703 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0291 M [4] NUT (M8X1.25-THD)  
3. 035-8017 [1] UNION  
4. 067-6264 [1] FITTING-FLARED  
5. 067-6265 [1] FITTING-BRASS  
6. 067-6998 [1] NUT (3/8-24-THD)  
7. 067-6999 [1] FERRULE  
8. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
9. 101-3877 [3] STUD (M8X1.25X37-MM)  
10. 124-3713 [1] CONNECTION  
11. 124-3714 [3] BOLT  
12. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
13. 140-8713 [2] CLIP  
14. 140-8714 [1] CLIP  
15. 140-8718 [4] WASHER  
16. 140-8719 [1] LINE-LEAKOFF  
17. 142-4248 [1] BRACKET  
18. 154-6016 [1] GEAR-PUMP (56-TEETH)  
19. 170-0580 [1] TUBE AS (CYLINDER ONE)  
20. 198-9224 [1] TUBE AS (CYLINDER TWO)  
21. 170-0582 [1] TUBE AS (CYLINDER THREE)  
22. 170-0583 [1] TUBE AS (CYLINDER FOUR)  
23. 173-7527 [1] SWITCH AS-TEMPERATURE (TIMING ADVANCE)  
24. 185-5757 [1] CABLE  
25. 185-6374 [1] TUBE AS  
26. 204-7853 [8] WASHER  
27. 205-3620 [1] CAP (MAX FUEL)  
28. 208-7947 [1] PUMP GP-FUEL INJECTION  
28A. 127-2231 [1] SEAL-O-RING  
28B. 176-6219 [1] SOLENOID (12-VOLT)(FUEL SHUTOFF)  
29. 208-7951 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
30. 147-6240 [1] HOLDER  
31. 208-7952 [1] NOZZLE  
32. 208-7954 [1] TUBE AS  
33. 101-3986 [1] CLIP  
  M   METRIC PART
 

#SEBP26661068
 

209-0703: PUMP GP-FUEL INJECTION

209-0703 PUMP GP-FUEL INJECTION
S/N 5YS14382-UP
i02177565 SEBP2666
2090703 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0291 M [4] NUT (M8X1.25-THD)  
3. 035-8017 [1] UNION  
4. 365-3308 [1] NUT-COMPRESSION  
5. 067-6265 [1] FITTING-BRASS  
6. 067-6998 [1] NUT (3/8-24-THD)  
7. 067-6999 [1] FERRULE  
8. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
9. 101-3877 [3] STUD (M8X1.25X37-MM)  
10. 247-9855 C [1] BOLT (M6X1X30-MM)  
11. 247-9844 C [3] BOLT (M6X1X16-MM)  
12. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
13. 140-8713 [2] CLIP  
14. 140-8714 [1] CLIP  
15. 140-8718 [4] WASHER  
16. 140-8719 [1] LINE-LEAKOFF  
17. 142-4248 [1] BRACKET  
18. 154-6016 [1] GEAR-PUMP (56-TEETH)  
19. 170-0580 [1] TUBE AS (CYLINDER ONE)  
20. 198-9224 [1] TUBE AS (CYLINDER TWO)  
21. 170-0582 [1] TUBE AS (CYLINDER THREE)  
22. 170-0583 [1] TUBE AS (CYLINDER FOUR)  
23. 173-7527 [1] SWITCH AS-TEMPERATURE (TIMING ADVANCE)  
24. 185-5757 [1] CABLE  
25. 185-6374 [1] TUBE AS  
26. 241-4754 C [8] WASHER (6.35X9.75X1.55-MM THK)  
27. 205-3620 [1] CAP (MAX FUEL)  
28. 208-7947 [1] PUMP GP-FUEL INJECTION  
28A. 127-2231 [1] SEAL-O-RING  
28B. 176-6219 [1] SOLENOID (12-VOLT)(FUEL SHUTOFF)  
29. 208-7951 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
30. 147-6240 [1] HOLDER  
31. 208-7952 [1] NOZZLE  
32. 208-7954 [1] TUBE AS  
33. 101-3986 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP26661069
 

210-2401: PUMP GP-FUEL INJECTION

210-2401 PUMP GP-FUEL INJECTION
S/N 5YS1-14381
ALSO AN ATTACHMENT
i01582590 SEBP2666
2102401 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 D [1] LOCKWIRE (1M)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 035-8017 [1] UNION  
4. 365-3308 [1] NUT-COMPRESSION  
5. 067-6265 [1] FITTING-BRASS  
6. 067-7006 [1] SEAL  
7. 101-3877 [3] STUD (M8X1.25X37-MM)  
8. 107-2348 [2] CLIP  
9. 107-2349 [1] HOSE  
10. 204-7853 [8] WASHER  
11. 124-3713 [1] CONNECTION  
12. 124-3714 [3] BOLT  
13. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
14. 140-8713 [2] CLIP  
15. 140-8714 [1] CLIP  
16. 140-8718 [4] WASHER  
17. 140-8719 [1] LINE-LEAKOFF  
18. 141-6189 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
18A. 141-6190 [1] NOZZLE  
18B. 154-6017 [1] HOLDER  
19. 145-8657 [1] TUBE AS  
19A. 101-3986 [1] CLIP  
20. 156-1578 [1] PUMP GP-FUEL INJECTION  
20A. 192-9155 [1] CONTROL AS-FUEL RATIO  
20B. 116-8648 [2] RING  
20C. 116-8645 [1] NUT  
21. 154-6016 [1] GEAR-PUMP (56-TEETH)  
22. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
23. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
24. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
25. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
26. 169-5326 [1] SWITCH-TEMPERATURE  
27. 186-6432 [1] CABLE  
  D   ORDER BY THE METER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
O-Ring Seal For Fuel Injection Pump Groups Is Now Serviced {1251}
1998/11/01
Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/01
Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}
1999/01/01
Cold Start Advance Solenoid Available{1272,1250}
1999/08/01
Remanufactured Stanadyne Fuel Injection Pumps are Available for 3054 and 3056 Engines {1251}
2000/11/01
Replacement of the Fuel Ratio Control Diaphragm {1251, 1278}
2003/12/01
Improvement to the Fuel Injection Pump {1251}
2008/09/01
Support for Fuel Injection Pumps {1251}
2008/07/14
Delphi Fuel Injection Pumps on 3054, 3056, 3054B, 3054C, C3.3, C4.4 (MECH), and C7.1 (MECH)Engines {1251}
2013/07/30
Operation and Maintenance Manual
Fuel Injection Nozzles - Test/Exchange
3054 and 3056 Industrial and Generator Set Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
O-Ring Seal Between Drive End Of Fuel Injection Pump And Back Side Of Front Housing
O-Ring Seal Between Drive End Of Fuel Injection Pump And Back Side Of Front Housing
REPLACEMENT OF THE FUEL RATIO CONTROL DIAPHRAGM
REPLACEMENT OF THE FUEL RATIO CONTROL DIAPHRAGM
Specifications
Fuel Injection Pump
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Nozzles
3054 and 3056 Industrial and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Timing - Check
3054 and 3056 Industrial and Generator Set Engines
Disassembly and Assembly
Fuel Injection Nozzles - Remove
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Nozzles - Install
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Pump - Remove
3054 and 3056 Industrial and Generator Set Engines
Fuel Injection Pump - Install
3054 and 3056 Industrial and Generator Set Engines
Service Magazine
Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08
Ferrule For Valve Mechanism Oil Feed {1102}
1999/11/22
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3054 :

PUMP GP-FUEL INJECTION
193-0160 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
187-1750 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
187-1750 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
187-1706 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
187-1706 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
186-6401 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
186-6401 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
184-1165 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
195-3707 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
198-4103 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
198-4103 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
198-4283 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
198-4283 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
201-4607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
209-0703 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
209-0703 PUMP GP-FUEL INJECTION

Truck sale:

CAT 3054
 
CAT 3054

Müller & Co. Equipment Ltd.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.