137-9588 WIRING GP-CHASSIS -COLD WEATHER S/N 4CS1-UP 240 VOLT PART OF 140-3003 STARTING AR-COLD WEATHER AN ATTACHMENT 5130B

137-9588: WIRING GP-CHASSIS

137-9588 WIRING GP-CHASSIS -COLD WEATHER
S/N 4CS1-UP
240 VOLT
PART OF 140-3003 STARTING AR-COLD WEATHER
AN ATTACHMENT

Parts for your 5130B MINING EXCAVATOR:

Pos.	Part No	Qty	Parts name
3.	061-9593	[2]	ADAPTER
4.	1S-0994	[7]	CLIP (LOOP)
5.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
6.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
7.	092-6025	[5]	CLIP (LOOP)
8.	9X-3495	[3]	CLIP AS
9.	4S-4455	[1]	CLIP
10.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
11.	8T-4133 M	[1]	NUT (M10X1.5-THD)
12.	139-6032	[1]	WIRE AS
13.	7K-1181	[4]	STRAP-CABLE
14.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
	M		METRIC PART

137-9587: WIRING GP-COLD WEATHER

WIRING GP-COLD WEATHER

137-9587 WIRING GP-COLD WEATHER -ENGINE, RH
S/N 4CS1-176
240 VOLT
PART OF 140-3003 STARTING AR-COLD WEATHER
AN ATTACHMENT

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	139-6033	[1]	WIRE AS (GREASE BARREL HEATER)
2.	122-2300	[1]	WIRE AS (FRONT HYDRAULIC TANK HEATER)
	1S-4915	[1]	LINER (CONDUIT)
	5P-0695 E		CONDUIT (450CM)
	6Y-6812	[1]	ELBOW-CONNECTOR
	2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(8CM)
	122-2299	[1]	WIRE AS
3.	122-2306	[1]	WIRE AS (LUBE TEMPERATURE SWITCH)
	5P-0695 E		CONDUIT (424CM)
	6Y-6812	[1]	ELBOW-CONNECTOR
	6Y-6814	[1]	CONNECTOR
	2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	9X-9756	[1]	FITTING AS
	122-2305	[1]	WIRE AS
4.	122-2298	[1]	WIRE AS (REAR HYDRAULIC TANK HEATER)
	1S-4915	[1]	LINER (CONDUIT)
	5P-0695 E		CONDUIT (451CM)
	6Y-6812	[1]	ELBOW-CONNECTOR
	2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(8CM)
	122-2297	[1]	WIRE AS
5.	122-2308	[1]	WIRE AS (LUBE OIL HEATER)
	5P-0695 E		CONDUIT (409CM)
	6Y-6814	[2]	CONNECTOR
	2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	9X-9758	[1]	FITTING AS
	122-2307	[1]	WIRE AS
6.	122-2304	[1]	WIRE AS (LH HEATER)
	5P-0695 E		CONDUIT (432CM)
	6Y-6814	[2]	CONNECTOR
	2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	9X-9756	[1]	FITTING AS
	122-2303	[1]	WIRE AS
7.	122-2302	[1]	WIRE AS (RH HEATER)
	5P-0695 E		CONDUIT (680CM)
	6Y-6814	[2]	CONNECTOR
	2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	9X-9756	[1]	FITTING AS
	122-2301	[1]	WIRE AS
8.	122-2296	[1]	WIRE AS (MAIN POWER)
	2L-8054	[1]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
	2L-8061	[1]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
	3N-9696	[1]	CONNECTOR
	3N-9711	[1]	CONNECTOR
	5P-1276 E		CONDUIT (26.5-MM ID)(541CM)
	2L-8049	[2]	TERMINAL-RING (6-GA, NO. 10 SCREW)
	2L-8057	[2]	TERMINAL-RING (8-GA, NO. 10 SCREW)
	122-2295		WIRE AS
9.	4V-3877	[1]	CABLE AS (GROUND)
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(132CM)
10.	8X-6020	[1]	BOX AS
	8X-4711 M	[2]	BOSS AS (M12X1.75X20-MM)
11.	8X-6635	[2]	WIRE AS
12.	8X-6058	[2]	WIRE AS
13.	122-2271	[2]	FUSE (20-AMPERE)
14.	8X-6643	[1]	PANEL
15.	7X-6020	[4]	INSULATION
16.	9F-9327	[4]	SCREW-MACHINE (10-32X0.375-IN)
17.	5N-5534	[4]	FUSE (15-AMPERE)
18.	9X-0259	[1]	GASKET
19.	8X-7174	[1]	PLATE
20.	7X-3349	[4]	SCREW-HEX HEAD (12-24X0.75-IN)
21.	4B-2051	[4]	NUT (12X24-THD)
22.	5N-5536	[6]	BLOCK-FUSE (250-VOLT AC)
23.	8C-7507	[28]	LOCKWASHER
24.	8T-6693 M	[24]	SCREW-MACHINE (M5X0.8X16-MM)
25.	5C-2874 M	[28]	NUT (M5X0.8-THD)
26.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
28.	121-9292	[1]	WIRE AS
29.	6Y-6815	[7]	GASKET AS (CONNECTOR)
30.	9X-8194	[3]	JUMPER-STRIP
31.	8T-0289 M	[4]	BOLT (M5X0.8X20-MM)
32.	4K-6498	[1]	BLOCK AS-TERMINAL
	6V-8363	[12]	SCREW (10-32X0.312-IN)
33.	8T-4224	[6]	WASHER-HARD (8.8X16X2-MM THK)
34.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
35.	6G-2263	[2]	SPACER (10.5X19X28.5-MM THK)
36.	9M-8406	[1]	CLIP (LOOP)
37.	5P-4325	[1]	CLIP (LOOP)
38.	3P-9847	[2]	CLIP
39.	1P-7009	[1]	CLIP
40.	1S-0994	[5]	CLIP (LOOP)
41.	4S-4455	[4]	CLIP
42.	092-6025	[3]	CLIP (LOOP)
43.	8R-6583	[4]	CLIP
44.	8R-6584	[4]	CLIP
45.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
46.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
47.	8T-4195 M	[8]	BOLT (M10X1.5X30-MM)
48.	142-1810	[1]	BOX
49.	8T-4121	[17]	WASHER-HARD (11X21X2.5-MM THK)
50.	142-1809	[1]	RECEPTACLE AS
	8T-9043	[4]	BOLT (5/16-18X0.875-IN)
	122-7154	[1]	GASKET
51.	8L-7593	[1]	BUSHING-TERMINAL
52.	122-6961	[1]	PLUG AS
	122-7153	[1]	GASKET
53.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
54.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
55.	9X-9754	[1]	SPRING
56.	4P-8134	[1]	CLIP (LADDER)
57.	7K-1181	[15]	STRAP-CABLE
58.	3B-7257	[1]	BUSHING-REDUCER
59.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
60.	4B-4863	[3]	WASHER (4.7X11X1.2-MM THK)
61.	2V-8652	[3]	SPACER (6.75X10.32X10-MM THK)
62.	6V-7978	[3]	SCREW-MACHINE (10-32X0.375-IN)
63.	8T-4133 M	[4]	NUT (M10X1.5-THD)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

137-9587: WIRING GP-COLD WEATHER

WIRING GP-COLD WEATHER

137-9587 WIRING GP-COLD WEATHER -ENGINE, RH
S/N 4CS177-UP
240 VOLT
PART OF 140-3003 STARTING AR-COLD WEATHER
AN ATTACHMENT

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2V-8652 C	[15]	SPACER (6.75X10.32X10-MM THK)
2.	3S-2093 C	[10]	STRAP-CABLE
3.	4K-6498	[1]	BLOCK AS-TERMINAL
	6V-8363	[12]	SCREW (10-32X0.312-IN)
4.	5N-5536	[6]	BLOCK-FUSE (250-VOLT AC)
5.	6G-2263 C	[7]	SPACER (10.5X19X28.5-MM THK)
6.	6Y-6815	[7]	GASKET AS (CONNECTOR)
7.	7K-1181 C	[1]	STRAP-CABLE
8.	8L-7593	[1]	BUSHING-TERMINAL
9.	8X-6635	[2]	WIRE AS
10.	8X-6643	[1]	PANEL
11.	8X-7174	[1]	PLATE
12.	9X-0259	[1]	GASKET
13.	9X-8194	[3]	JUMPER-STRIP
14.	092-6025 C	[2]	CLIP (LOOP)
15.	207-7541 C	[1]	WIRE AS
	5P-0695 E		CONDUIT (417-CM)
	6Y-6812	[1]	ELBOW-CONNECTOR
	6Y-6814	[1]	CONNECTOR
	2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	9X-9756	[1]	FITTING AS
	208-5049	[1]	WIRE AS
16.	207-7542 C	[1]	WIRE AS
	5P-0695 E		CONDUIT (409-CM)
	6Y-6814	[2]	CONNECTOR
	2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	9X-9758	[1]	FITTING AS
	208-5050	[1]	WIRE AS
17.	207-7543 C	[1]	WIRE AS
	5P-0695 E		CONDUIT (432-CM)
	6Y-6814	[2]	CONNECTOR
	2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	9X-9756	[1]	FITTING AS
	208-5052	[1]	WIRE AS
18.	207-7544 C	[1]	WIRE AS
	5P-0695 E		CONDUIT (673-CM)
	6Y-6814	[2]	CONNECTOR
	2L-8076	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	9X-9756	[1]	FITTING AS
	208-5051	[1]	WIRE AS
19.	207-7545 C	[1]	WIRE AS
20.	208-3780 C	[1]	HARNESS AS
21.	208-3781 C	[1]	WIRE AS
22.	208-3782 C	[1]	WIRE AS
23.	121-9292	[1]	WIRE AS
24.	122-2271	[2]	FUSE (20-AMPERE)
25.	142-1809	[1]	RECEPTACLE AS
	8T-9043	[4]	BOLT (5/16-18X0.875-IN)
	122-7154	[1]	GASKET
26.	142-1810	[1]	BOX
27.	1S-0994 C	[6]	CLIP (LOOP)
28.	3B-7257	[1]	BUSHING-REDUCER
29.	3P-9847 C	[3]	CLIP
30.	4B-1240 C	[4]	SCREW-MACHINE (10-32X1-IN)
31.	4B-2051	[4]	NUT (12X24-THD)
32.	4B-4863	[3]	WASHER (4.7X11X1.2-MM THK)
33.	4L-1250 C	[4]	LOCKNUT (10-32-THD)
34.	4P-8134	[1]	CLIP (LADDER)
35.	4S-4455	[4]	CLIP
36.	4V-3877	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(132-CM)
37.	5C-2874 M	[28]	NUT (M5X0.8-THD)
38.	5N-5534	[4]	FUSE (15-AMPERE)
39.	6V-7978	[3]	SCREW-MACHINE (10-32X0.375-IN)
40.	6V-8363 C	[11]	SCREW (10-32X0.312-IN)
41.	7X-0620 C	[8]	WASHER-HARD (5.5X13X1.6-MM THK)
42.	7X-3349	[4]	SCREW-HEX HEAD (12-24X0.75-IN)
43.	8C-7507	[28]	LOCKWASHER
44.	8R-6583	[4]	CLIP
45.	8R-6584	[4]	CLIP
46.	8T-0289 M	[4]	BOLT (M5X0.8X20-MM)
47.	8T-4121 C	[19]	WASHER-HARD (11X21X2.5-MM THK)
48.	8T-4133 CM	[5]	NUT (M10X1.5-THD)
49.	8T-4136 CM	[4]	BOLT (M10X1.5X25-MM)
50.	8T-4137 CM	[4]	BOLT (M10X1.5X20-MM)
51.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
52.	8T-4185 CM	[2]	BOLT (M10X1.5X50-MM)
53.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
54.	8T-4195 CM	[5]	BOLT (M10X1.5X30-MM)
55.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
56.	8T-4224	[6]	WASHER-HARD (8.8X16X2-MM THK)
57.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
58.	8T-5005 CM	[4]	BOLT (M10X1.5X70-MM)
59.	8T-6693 M	[24]	SCREW-MACHINE (M5X0.8X16-MM)
60.	8X-6020	[1]	BOX AS
	8X-4711 M	[2]	BOSS AS (M12X1.75X20-MM)
61.	8X-6058	[2]	WIRE AS
62.	9M-8406 C	[2]	CLIP (LOOP)
63.	9X-9754	[1]	SPRING
64.	122-6961	[1]	PLUG AS
	122-7153	[1]	GASKET
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

136-2003: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

136-2003 WIRING GP-ELECTRONIC CONTROL
S/N 4CS1-172
PART OF 135-4424 ENCLOSURE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-2071	[1]	HARNESS AS
2.	4P-8134	[2]	CLIP (LADDER)
3.	115-3072	[2]	CLIP AS-CONNECTING (8-PIN)
4.	7X-7729	[3]	WASHER (11X25X3-MM THK)
6.	6D-4636	[2]	CLIP (LOOP)
7.	1S-0994	[4]	CLIP (LOOP)
8.	3T-3046	[1]	CLIP AS
9.	5P-7211 D		SEAL (.3M)
10.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
11.	3S-2093	[2]	STRAP-CABLE
12.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4137 M	[17]	BOLT (M10X1.5X20-MM)
14.	140-9817	[1]	BOX AS
	6V-9632 M	[15]	NUT-WELD (M6X1-THD)
	7T-1099	[8]	LINK
	8T-3490 M	[7]	NUT-WELD (M10X1.5-THD)
	8T-3612 M	[13]	NUT-WELD (M8X1.25-THD)
	8X-4711 M	[3]	BOSS AS (M12X1.75X20-MM)
	8Y-3795 M	[1]	BOSS (M10X1.5X39-MM)
	9R-2613 M	[1]	BOSS-WELD (M10X1.5X25-MM)
15.	125-7806	[1]	COVER AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
	8X-3869	[2]	HINGE
16.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
17.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
18.	6Y-6584	[1]	STRAP AS-GROUND
19.	8X-5804	[1]	STRAP AS-GROUND
20.	125-7805	[1]	DOOR AS
21.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
22.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
23.	8M-2770	[2]	CLIP (LOOP)
24.	8P-8540	[1]	GROMMET
25.	9G-9152	[1]	CLIP
26.	7X-7729	[4]	WASHER (11X25X3-MM THK)
27.	123-9146	[1]	PLATE
28.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
29.	6V-8918	[2]	BOLT (5/16-18X1.25-IN)
30.	116-2267 Y	[1]	SWITCH GP-POSITION (LH LADDER)
31.	9U-2277	[1]	CLIP AS
32.	8T-4133 M	[1]	NUT (M10X1.5-THD)
33.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
34.	3S-2093	[6]	STRAP-CABLE
35.	6D-9331	[8]	WASHER (5X9X74-MM THK)
36.	4M-7470	[2]	GROMMET
37.	098-8968	[4]	WASHER (5X16X1.2-MM THK)
38.	4V-4164	[4]	BUSHING-TERMINAL
39.	9F-8125	[4]	LOCKWASHER
40.	5P-7848 M	[4]	NUT (M4X0.7-THD)
41.	9X-2606 M	[2]	SCREW-ROUND HEAD (M4X0.7X30-MM)
42.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
43.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
44.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(SUBSTRUCTURE LAMP)
	3L-8187	[2]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
45.	125-4192	[1]	PLATE
46.	124-8098	[1]	LATCH AS
47.	125-8176	[1]	CAM-LATCH
48.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
49.	4D-7794	[1]	CLIP
50.	114-5333 L	[1]	SWITCH AS-PRESSURE (HIGH LOW)(A/C)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
51.	144-3010	[1]	WIRE AS
52.	103-5973	[1]	CABLE AS (4-GA, RED)
	8T-5346 BE		TUBE-HEAT SHRINK (19.1-MM DIA)
	5P-3454	[2]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
53.	144-3011	[1]	WIRE AS
54.	108-7678	[1]	WIRE AS (8-GA)
55.	9X-7378	[1]	SEAL-O-RING
56.	8M-2770	[1]	CLIP (LOOP)
57.	6T-3642	[1]	CIRCUIT BREAKER AS (10-AMPERE)(KEY SWITCH)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
58.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
59.	9X-8486	[4]	SCREW-MACHINE (8-32X0.75-IN)
60.	3E-7294	[2]	CIRCUIT BREAKER AS (105-AMPERE)
			(EACH INCLUDES)
	1H-3244	[2]	LOCKWASHER
	6V-8365	[2]	SCREW-MACHINE (1/4-28X0.5-IN)
61.	6V-7978	[4]	SCREW-MACHINE (10-32X0.375-IN)
62.	4H-2558	[1]	GROMMET
63.	125-6794 Y	[1]	LAMP GP-VIMS SERVICE INDICATOR
64.	3S-2093	[9]	STRAP-CABLE
65.	8T-9658	[4]	SPACER (8.2X12.7X25.4-MM THK)
66.	8T-9655	[8]	MOUNT-ISOLATION
67.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
68.	8T-6912 M	[4]	BOLT (M8X1.25X50-MM)
69.	108-7696	[2]	BAR
70.	7I-5336	[1]	BRACKET
71.	108-7682	[1]	BRACKET
72.	8T-4138 M	[6]	BOLT (M6X1X20-MM)
73.	9X-8256	[9]	WASHER (6.6X12X2-MM THK)
74.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
75.	167-0138 JY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
76.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
77.	106-8704 P	[1]	SUPPRESSOR AS-ARC
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
78.	5C-2890 M	[3]	NUT (M6X1-THD)
79.	8T-8799	[2]	BOOT (RED)
80.	9U-2277	[1]	CLIP AS
81.	8T-8827	[1]	BOOT (RED)
82.	136-2072	[1]	HARNESS AS
83.	8M-8948	[1]	FUSE (15-AMPERE)
84.	7K-1181	[9]	STRAP-CABLE
85.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
86.	124-6704	[1]	RESISTOR AS (ETHER SOLENOID LOAD)
87.	9G-8451	[1]	BLOCK AS
88.	165-8682 Y	[1]	CONTROL GP-UNPRGMED MONITOR (VIDS, VIMS MAIN MODULE)
89.	6V-6649 Y	[1]	MODULE GP-VIDS/VIMS INTERFACE
90.	118-3534	[2]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
			(EACH INCLUDES)
	5C-2890 M	[2]	NUT (M6X1-THD)
91.	4P-8134	[1]	CLIP (LADDER)
92.	130-4735	[2]	WIRE AS
93.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
94.	3E-5239	[4]	RELAY AS (24-VOLT)
95.	3K-8782	[8]	FUSE (10-AMPERE)
96.	6V-1889	[4]	CLIP (LOOP)
97.	7I-5312	[2]	STRIP (2-MM THK)
98.	3V-4784	[2]	BLOCK-FUSE
99.	032-4000	[4]	SCREW (6-32X0.5-IN)
100.	4B-1255	[2]	SCREW-MACHINE (1/4-20X0.75-IN)
101.	2F-0951	[2]	LOCKWASHER
102.	4F-5644	[2]	NUT-FULL (1/4-20-THD)
103.	6D-4636	[1]	CLIP (LOOP)
104.	9M-8406	[8]	CLIP (LOOP)
105.	8T-4138 M	[9]	BOLT (M6X1X20-MM)
106.	9X-8256	[9]	WASHER (6.6X12X2-MM THK)
107.	156-1044 Y	[1]	CONTROL GP-MACHINE (MACHINE MODULE)
108.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
109.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
110.	6G-2263	[1]	SPACER (10.5X19X28.5-MM THK)
111.	8T-4133 M	[3]	NUT (M10X1.5-THD)
112.	8T-4136 M	[11]	BOLT (M10X1.5X25-MM)
113.	3S-2093 B	[10]	STRAP-CABLE
114.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
115.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
116.	3S-2093	[2]	STRAP-CABLE
117.	8T-9658	[4]	SPACER (8.2X12.7X25.4-MM THK)
118.	8T-9655	[16]	MOUNT-ISOLATION
119.	104-5612	[2]	BAR
120.	4L-6454	[4]	BOLT (3/8-16X1-IN)
121.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
122.	8T-4121	[20]	WASHER-HARD (11X21X2.5-MM THK)
123.	9N-0869	[24]	WASHER-HARD (8.8X25.5X2-MM THK)
124.	8T-6912 M	[8]	BOLT (M8X1.25X50-MM)
125.	5P-2369	[1]	CLIP (LOOP)
126.	7D-7233	[1]	CLIP (LOOP)

			AVAILABLE REPAIR KIT(S):
	102-8802 LP	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	102-8807 J	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J SERVICES PART(S) MARKED J
	L		KIT MARKED L SERVICES PART(S) MARKED L
	M		METRIC PART
	P		KIT MARKED P SERVICES PART(S) MARKED P
	Y		SEPARATE ILLUSTRATION

187-1691: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

187-1691 WIRING GP-ELECTRONIC CONTROL
S/N 4CS173-191
PART OF 187-1684 RISER AR-CAB

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	189-3662	[1]	HARNESS AS
2.	194-6830	[1]	HARNESS AS (CAB RISER)
3.	8M-8948	[1]	FUSE (15-AMPERE)(DC CONVERTER)
4.	144-3010	[1]	WIRE AS
5.	103-5973	[1]	CABLE AS (4-GA, RED)
6.	144-3011	[1]	WIRE AS
7.	108-7678	[1]	WIRE AS (8-GA)
8.	189-3677 Y	[1]	APPLICATION GP-MONITOR (VIMS MAIN MODULE)
9.	6V-6649 Y	[1]	MODULE GP-VIDS/VIMS INTERFACE
10.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE CONTROL)
11.	6T-3642	[1]	CIRCUIT BREAKER AS (10-AMPERE)(KEY SWITCH)
12.	9X-8486	[4]	SCREW-MACHINE (8-32X0.75-IN)
13.	3E-7294	[1]	CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR)
13A.	3E-7294	[1]	CIRCUIT BREAKER AS (105-AMPERE)(MAIN)
14.	6V-7978	[4]	SCREW-MACHINE (10-32X0.375-IN)
15.	125-7806	[1]	COVER AS
16.	125-6794 Y	[1]	LAMP GP-VIMS SERVICE INDICATOR
17.	7I-5312	[2]	STRIP (2-MM THK)
18.	3V-4784	[2]	BLOCK-FUSE
19.	032-4000	[4]	SCREW (6-32X0.5-IN)
20.	4B-1255	[2]	SCREW-MACHINE (1/4-20X0.75-IN)
21.	2F-0951	[2]	LOCKWASHER
22.	4F-5644	[2]	NUT-FULL (1/4-20-THD)
23.	7I-5336	[1]	BRACKET
24.	108-7682	[1]	BRACKET
25.	8T-4138 M	[18]	BOLT (M6X1X20-MM)
26.	9X-8256	[21]	WASHER (6.6X12X2-MM THK)
27.	125-4192	[1]	PLATE
28.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
29.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(LAMP SWITCH)
30.	125-7805	[1]	DOOR AS
31.	5C-2890 M	[3]	NUT (M6X1-THD)
32.	8X-5804	[1]	STRAP AS-GROUND
33.	6Y-6584	[1]	STRAP AS-GROUND
34.	8T-4179 M	[4]	BOLT (M12X1.75X20-MM)
35.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
36.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
37.	106-8704	[1]	SUPPRESSOR AS-ARC
38.	184-6078	[1]	BOX AS
39.	104-5612	[2]	BAR
40.	4L-6454	[4]	BOLT (3/8-16X1-IN)
41.	8T-4137 M	[23]	BOLT (M10X1.5X20-MM)
42.	8T-4121	[41]	WASHER-HARD (11X21X2.5-MM THK)
43.	108-7696	[2]	BAR
44.	8T-6912 M	[12]	BOLT (M8X1.25X50-MM)
45.	9N-0869	[32]	WASHER-HARD (8.8X25.5X2-MM THK)
46.	8T-9655	[24]	MOUNT-ISOLATION
47.	8T-9658	[8]	SPACER (8.2X12.7X25.4-MM THK)
48.	9X-2606 M	[2]	SCREW-ROUND HEAD (M4X0.7X30-MM)
49.	5P-7848 M	[4]	NUT (M4X0.7-THD)
50.	9F-8125	[4]	LOCKWASHER
51.	4V-4164	[4]	BUSHING-TERMINAL
52.	098-8968	[4]	WASHER (5X16X1.2-MM THK)
53.	4M-7470	[2]	GROMMET
54.	6D-9331	[8]	WASHER (5X9X74-MM THK)
55.	3S-2093 B	[26]	STRAP-CABLE
56.	8T-4136 M	[15]	BOLT (M10X1.5X25-MM)
57.	8T-4133 M	[4]	NUT (M10X1.5-THD)
58.	6G-2263	[1]	SPACER (10.5X19X28.5-MM THK)
59.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
60.	5P-7211 D		SEAL (30 CM)
61.	4H-2558	[1]	GROMMET
62.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
63.	191-2937 Y	[1]	APPLICATION GP-MACHINE (MACHINE CONTROL MODULE)
64.	1S-0994	[4]	CLIP (LOOP)
65.	9M-8406	[8]	CLIP (LOOP)
66.	6D-4636	[3]	CLIP (LOOP)
67.	6V-1889	[4]	CLIP (LOOP)
68.	3K-8782	[8]	FUSE (10-AMPERE)
69.	124-8098	[1]	LATCH AS
70.	125-8176	[1]	CAM-LATCH
71.	9U-2277	[2]	CLIP AS
72.	3E-5239	[4]	RELAY AS (24-VOLT)
73.	4D-7794	[1]	CLIP
74.	7X-7729	[3]	WASHER (11X25X3-MM THK)
75.	8M-2770	[3]	CLIP (LOOP)
76.	9X-7378	[1]	SEAL-O-RING
77.	114-5333	[1]	SWITCH AS-PRESSURE (HIGH LOW)(A/C)
78.	115-3072	[2]	CLIP AS-CONNECTING (8-PIN)
79.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
80.	130-4735	[2]	WIRE AS
81.	4P-8134	[3]	CLIP (LADDER)
82.	118-3534	[2]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAYS)
83.	9G-8451	[1]	BLOCK AS
84.	124-6704	[1]	RESISTOR AS (ETHER SOLENOID LOAD)
85.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
86.	7K-1181	[9]	STRAP-CABLE
87.	8T-8827	[1]	BOOT (RED)
88.	8T-8799	[2]	BOOT (RED)
89.	7D-7233	[1]	CLIP (LOOP)
90.	5P-2369	[1]	CLIP (LOOP)
91.	2M-4004	[1]	BUTTON-PLUG
92.	197-9452	[1]	HARNESS AS-CHASSIS
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

187-1691: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

187-1691 WIRING GP-ELECTRONIC CONTROL
S/N 4CS192-212
PART OF 187-1684 RISER AR-CAB

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	205-3214 C	[1]	HARNESS AS
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	102-8811	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH KIT INCLUDES PLUG AS. & WEDGE)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
2.	205-3212 C	[1]	HARNESS AS-CAB (CAB RISER)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	102-8808	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS. & WEDGE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS. & WEDGE)
3.	8M-8948	[1]	FUSE (15-AMPERE)(DC CONVERTER)
4.	144-3010	[1]	WIRE AS
5.	103-5973	[1]	CABLE AS (4-GA, RED)
6.	144-3011	[1]	WIRE AS
7.	108-7678	[1]	WIRE AS (8-GA)
8.	189-3677 Y	[1]	APPLICATION GP-MONITOR (VIMS MAIN MODULE)
9.	6V-6649 Y	[1]	MODULE GP-VIDS/VIMS INTERFACE
10.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
11.	6T-3642	[1]	CIRCUIT BREAKER AS (10-AMPERE)(KEY SWITCH)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
12.	9X-8486	[4]	SCREW-MACHINE (8-32X0.75-IN)
13.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR)
13A.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(MAIN)
14.	6V-7978	[4]	SCREW-MACHINE (10-32X0.375-IN)
15.	125-7806	[1]	COVER AS
16.	125-6794 Y	[1]	LAMP GP-VIMS SERVICE INDICATOR
17.	7I-5312	[2]	STRIP (2-MM THK)
18.	3V-4784	[2]	BLOCK-FUSE
19.	032-4000	[4]	SCREW (6-32X0.5-IN)
20.	4B-1255	[2]	SCREW-MACHINE (1/4-20X0.75-IN)
21.	2F-0951	[2]	LOCKWASHER
22.	4F-5644	[2]	NUT-FULL (1/4-20-THD)
23.	7I-5336	[1]	BRACKET
24.	108-7682	[1]	BRACKET
25.	8T-4138 M	[18]	BOLT (M6X1X20-MM)
26.	9X-8256	[21]	WASHER (6.6X12X2-MM THK)
27.	125-4192	[1]	PLATE
28.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
29.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(LAMP SWITCH)
30.	125-7805	[1]	DOOR AS
31.	5C-2890 M	[3]	NUT (M6X1-THD)
32.	8X-5804	[1]	STRAP AS-GROUND
33.	6Y-6584	[1]	STRAP AS-GROUND
34.	8T-4179 CM	[5]	BOLT (M12X1.75X20-MM)
35.	8T-4223 C	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
36.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
37.	106-8704	[1]	SUPPRESSOR AS-ARC
38.	184-6078	[1]	BOX AS
39.	104-5612	[2]	BAR
40.	4L-6454	[4]	BOLT (3/8-16X1-IN)
41.	8T-4137 M	[23]	BOLT (M10X1.5X20-MM)
42.	8T-4121	[41]	WASHER-HARD (11X21X2.5-MM THK)
43.	108-7696	[2]	BAR
44.	8T-6912 M	[12]	BOLT (M8X1.25X50-MM)
45.	9N-0869	[32]	WASHER-HARD (8.8X25.5X2-MM THK)
46.	8T-9655	[24]	MOUNT-ISOLATION
47.	8T-9658	[8]	SPACER (8.2X12.7X25.4-MM THK)
48.	9X-2606 M	[2]	SCREW-ROUND HEAD (M4X0.7X30-MM)
49.	5P-7848 M	[4]	NUT (M4X0.7-THD)
50.	9F-8125	[4]	LOCKWASHER
51.	4V-4164	[4]	BUSHING-TERMINAL
52.	098-8968	[4]	WASHER (5X16X1.2-MM THK)
53.	4M-7470	[2]	GROMMET
54.	6D-9331	[8]	WASHER (5X9X74-MM THK)
55.	3S-2093 B	[26]	STRAP-CABLE
56.	8T-4136 M	[15]	BOLT (M10X1.5X25-MM)
57.	8T-4133 M	[4]	NUT (M10X1.5-THD)
58.	6G-2263	[1]	SPACER (10.5X19X28.5-MM THK)
59.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
60.	5P-7211 D		SEAL (30 CM)
61.	4H-2558	[1]	GROMMET
62.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
63.	191-2937 Y	[1]	APPLICATION GP-MACHINE (MACHINE CONTROL MODULE)
64.	1S-0994	[4]	CLIP (LOOP)
65.	9M-8406	[8]	CLIP (LOOP)
66.	6D-4636	[3]	CLIP (LOOP)
67.	6V-1889	[4]	CLIP (LOOP)
68.	3K-8782	[1]	FUSE (10-AMPERE)(AUTO LUBE)
69.	124-8098	[1]	LATCH AS
70.	125-8176	[1]	CAM-LATCH
71.	9U-2277	[2]	CLIP AS
72.	3E-5239	[1]	RELAY AS (24-VOLT)(ETHER CURRENT LEVEL)
73.	4D-7794	[1]	CLIP
74.	7X-7729	[3]	WASHER (11X25X3-MM THK)
75.	8M-2770	[3]	CLIP (LOOP)
76.	9X-7378	[1]	SEAL-O-RING
77.	114-5333	[1]	SWITCH AS-PRESSURE (HIGH LOW)(A/C)
78.	115-3072	[2]	CLIP AS-CONNECTING (8-PIN)
79.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
80.	130-4735	[2]	WIRE AS
81.	4P-8134	[3]	CLIP (LADDER)
82.	118-3534	[2]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAYS)
83.	9G-8451	[1]	BLOCK AS
	1H-3244	[1]	LOCKWASHER
	4B-4276	[2]	WASHER (7X16X1.6-MM THK)
	4L-7124	[1]	BOLT (1/4-20X1.25-IN)
	6V-8185	[2]	NUT (1/4-20-THD)
84.	124-6704	[1]	RESISTOR AS (ETHER SOLENOID LOAD)
85.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
86.	7K-1181	[9]	STRAP-CABLE
87.	8T-8827	[1]	BOOT (RED)
88.	8T-8799	[2]	BOOT (RED)
89.	7D-7233	[1]	CLIP (LOOP)
90.	5P-2369	[1]	CLIP (LOOP)
91.	2M-4004	[1]	BUTTON-PLUG
92.	197-9452	[1]	HARNESS AS-CHASSIS
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
93.	3E-5239	[1]	RELAY AS (24-VOLT)(ETHER START)
94.	3E-5239	[1]	RELAY AS (24-VOLT)(BOOM FLOAT)
95.	3E-5239	[1]	RELAY AS (24-VOLT)(AUTO LUBE)
96.	3K-8782	[1]	FUSE (10-AMPERE)(MAC-14)
97.	3K-8782	[1]	FUSE (10-AMPERE)(VIMS)
98.	3K-8782	[1]	FUSE (10-AMPERE)(AIR DRYER)
99.	3K-8782	[1]	FUSE (10-AMPERE)(DOME LIGHT)
100.	3K-8782	[1]	FUSE (10-AMPERE)(LADDER LAMP)
101.	3K-8782	[1]	FUSE (10-AMPERE)(ENGINE LAMP)
102.	3K-8782	[1]	FUSE (10-AMPERE)(SERVICE LAMP)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

187-1691: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

187-1691 WIRING GP-ELECTRONIC CONTROL
S/N 4CS213-UP
PART OF 187-1684 RISER AR-CAB

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	227-8267 C	[1]	HARNESS AS-FRONT
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3T-3412	[2]	PLUG AS-CONNECTOR (37-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2272	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
2.	205-3212	[1]	HARNESS AS-CAB
	3T-3044	[1]	PLUG AS-CONNECTOR (25-PIN)
	8N-1514	[2]	PLUG AS-CONNECTOR (37-PIN)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
	9X-1054	[4]	PLUG AS-CONNECTOR (4-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6846	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS. & WEDGE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS. & WEDGE)
3.	8M-8948	[1]	FUSE (15-AMPERE)(DC CONVERTER)
4.	144-3010	[1]	WIRE AS
5.	103-5973	[1]	CABLE AS (4-GA, RED)
	8T-5346 BE		TUBE-HEAT SHRINK (19.1-MM DIA)
6.	144-3011	[1]	WIRE AS
7.	108-7678	[1]	WIRE AS (8-GA)
8.	189-3677 Y	[1]	APPLICATION GP-MONITOR (VIMS MAIN MODULE)
9.	6V-6649 Y	[1]	MODULE GP-VIDS/VIMS INTERFACE
10.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENGINE CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
11.	6T-3642	[1]	CIRCUIT BREAKER AS (10-AMPERE)(KEY SWITCH)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
12.	9X-8486	[4]	SCREW-MACHINE (8-32X0.75-IN)
13.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR)
13A.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(MAIN)
			(EACH INCLUDES)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
14.	6V-7978	[4]	SCREW-MACHINE (10-32X0.375-IN)
15.	125-7806	[1]	COVER AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
	8X-3869	[2]	HINGE
16.	125-6794 Y	[1]	LAMP GP-VIMS SERVICE INDICATOR
17.	7I-5312	[2]	STRIP (2-MM THK)
18.	3V-4784	[2]	BLOCK-FUSE
	3L-8187	[20]	LOCKWASHER
	8F-5734	[20]	SCREW-MACHINE (6-32X0.187-IN)
19.	032-4000	[4]	SCREW (6-32X0.5-IN)
20.	4B-1255	[2]	SCREW-MACHINE (1/4-20X0.75-IN)
21.	2F-0951	[2]	LOCKWASHER
22.	4F-5644	[2]	NUT-FULL (1/4-20-THD)
23.	7I-5336	[1]	BRACKET
24.	108-7682	[1]	BRACKET
25.	8T-4138 M	[18]	BOLT (M6X1X20-MM)
26.	9X-8256	[21]	WASHER (6.6X12X2-MM THK)
27.	125-4192	[1]	PLATE
28.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
29.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(LAMP SWITCH)
	3L-8187	[2]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
30.	125-7805	[1]	DOOR AS
31.	5C-2890 M	[3]	NUT (M6X1-THD)
32.	8X-5804	[1]	STRAP AS-GROUND
33.	6Y-6584	[1]	STRAP AS-GROUND
34.	8T-4179 M	[5]	BOLT (M12X1.75X20-MM)
35.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
36.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
37.	184-6078	[1]	BOX AS
38.	104-5612	[2]	BAR
39.	4L-6454	[4]	BOLT (3/8-16X1-IN)
40.	8T-4137 CM	[24]	BOLT (M10X1.5X20-MM)
41.	8T-4121 C	[43]	WASHER-HARD (11X21X2.5-MM THK)
42.	108-7696	[2]	BAR
43.	8T-6912 M	[12]	BOLT (M8X1.25X50-MM)
44.	9N-0869	[32]	WASHER-HARD (8.8X25.5X2-MM THK)
45.	8T-9655	[24]	MOUNT-ISOLATION
46.	8T-9658	[8]	SPACER (8.2X12.7X25.4-MM THK)
47.	9X-2606 M	[2]	SCREW-ROUND HEAD (M4X0.7X30-MM)
48.	5P-7848 M	[4]	NUT (M4X0.7-THD)
49.	9F-8125	[4]	LOCKWASHER
50.	4V-4164	[4]	BUSHING-TERMINAL
51.	098-8968	[4]	WASHER (5X16X1.2-MM THK)
52.	4M-7470	[2]	GROMMET
53.	6D-9331	[8]	WASHER (5X9X74-MM THK)
54.	3S-2093 BC	[25]	STRAP-CABLE
55.	8T-4136 M	[15]	BOLT (M10X1.5X25-MM)
56.	8T-4133 M	[4]	NUT (M10X1.5-THD)
57.	6G-2263	[1]	SPACER (10.5X19X28.5-MM THK)
58.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
59.	5P-7211 E		SEAL (30 CM)
60.	4H-2558	[1]	GROMMET
61.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
62.	191-2937 Y	[1]	APPLICATION GP-MACHINE (MACHINE CONTROL MODULE)
63.	1S-0994	[4]	CLIP (LOOP)
64.	9M-8406	[8]	CLIP (LOOP)
65.	6D-4636	[3]	CLIP (LOOP)
66.	6V-1889	[4]	CLIP (LOOP)
67.	3K-8782	[1]	FUSE (10-AMPERE)(AUTO LUBE)
67A.	3K-8782	[1]	FUSE (10-AMPERE)(MAC-14)
67B.	3K-8782	[1]	FUSE (10-AMPERE)(VIMS)
67C.	3K-8782	[1]	FUSE (10-AMPERE)(AIR DRYER)
67D.	3K-8782	[1]	FUSE (10-AMPERE)(DOME LIGHT)
67E.	3K-8782	[1]	FUSE (10-AMPERE)(LADDER LAMP)
67F.	3K-8782	[1]	FUSE (10-AMPERE)(ENGINE LAMP)
67G.	3K-8782	[1]	FUSE (10-AMPERE)(SERVICE LAMP)
68.	124-8098	[1]	LATCH AS
69.	125-8176	[1]	CAM-LATCH
70.	9U-2277 C	[1]	CLIP AS
	8C-3334	[1]	RIVET-TUBULAR
71.	3E-5239	[1]	RELAY AS (24-VOLT)(ETHER CURRENT LEVEL)
71A.	3E-5239	[1]	RELAY AS (24-VOLT)(ETHER START)
71B.	3E-5239	[1]	RELAY AS (24-VOLT)(BOOM FLOAT)
71C.	3E-5239	[1]	RELAY AS (24-VOLT)(AUTO LUBE)
72.	7X-7729	[3]	WASHER (11X25X3-MM THK)
73.	8M-2770	[3]	CLIP (LOOP)
74.	9X-7378 C	[2]	SEAL-O-RING
75.	114-5333	[1]	SWITCH AS-PRESSURE (HIGH LOW)(A/C)
	9X-1386		SLEEVE (25-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
76.	115-3072	[2]	CLIP AS-CONNECTING (8-PIN)
	8C-3334	[1]	RIVET-TUBULAR
77.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
78.	130-4735	[2]	WIRE AS
79.	4P-8134	[3]	CLIP (LADDER)
80.	118-3534	[2]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAYS)
81.	9G-8451	[1]	BLOCK AS
	1H-3244	[1]	LOCKWASHER
	4B-4276	[2]	WASHER (7X16X1.6-MM THK)
	4L-7124	[1]	BOLT (1/4-20X1.25-IN)
	6V-8185	[2]	NUT (1/4-20-THD)
82.	124-6704	[1]	RESISTOR AS (ETHER SOLENOID LOAD)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	5P-0705 BD		TUBE-HEAT SHRINK (6.35-MM DIA)
	8C-3334	[1]	RIVET-TUBULAR
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
83.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
84.	7K-1181	[9]	STRAP-CABLE
85.	8T-8827	[1]	BOOT (RED)
86.	8T-8799	[2]	BOOT (RED)
87.	7D-7233	[1]	CLIP (LOOP)
88.	5P-2369	[1]	CLIP (LOOP)
89.	2M-4004	[1]	BUTTON-PLUG
90.	197-9452	[1]	HARNESS AS-CHASSIS
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS. & WEDGE)
91.	130-5300	[3]	CLIP
92.	169-7443	[1]	TIMER AS-ON DELAY (24-VOLT)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
93.	149-6371	[1]	SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(AIR CONDITIONER, LOW)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

136-2002: WIRING GP-ENCLOSURE

WIRING GP-ENCLOSURE

136-2002 WIRING GP-ENCLOSURE -LH
S/N 4CS1-207
PART OF 135-4424, 187-2916 ENCLOSURE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-2014	[1]	HARNESS AS (MAIN)
2.	194-6831	[1]	HARNESS AS-CHASSIS (CAB, FRAME)
3.	140-9815	[1]	PLATE
4.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
5.	115-3070	[2]	CLIP AS-CONNECTING (4-PIN)
6.	109-2119	[1]	GUARD AS
7.	4D-1836	[1]	SWITCH-TOGGLE (GROUND LEVEL SHUTOFF)
8.	112-6797	[1]	PLATE
9.	3E-5169	[1]	GUARD-SWITCH
10.	8X-5804	[2]	STRAP AS-GROUND
11.	8T-4179 M	[4]	BOLT (M12X1.75X20-MM)
12.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	102-1400 Y	[1]	SENSOR GP-PRESSURE (AUTOLUBE)
14.	8T-7087	[1]	GROMMET (34-MM ID)
15.	5P-7468	[1]	CLIP (SLOT)
16.	5P-7469	[1]	CLIP (TAB)
17.	3E-2337	[1]	ADAPTER
18.	7J-0204	[1]	SEAL-O-RING
19.	6V-8397	[1]	SEAL-O-RING
20.	9X-3495	[2]	CLIP AS
21.	118-5051	[1]	PLATE
22.	4H-2558	[1]	GROMMET
23.	9G-9150	[3]	CLIP
24.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(ENCLOSURE LAMP)
	3L-8187	[2]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
25.	3S-2093	[11]	STRAP-CABLE
26.	101-0461 Y	[1]	LAMP GP-WORKING (ENCLOSURE)(HYDRAULIC OIL COOLER FAN ROOM)
27.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
28.	5C-2890 M	[3]	NUT (M6X1-THD)
29.	5P-4115	[1]	WASHER-HARD (7.2X19X2-MM THK)
30.	8T-4137 M	[30]	BOLT (M10X1.5X20-MM)
31.	8T-4121	[47]	WASHER-HARD (11X21X2.5-MM THK)
33.	4S-4455	[6]	CLIP
34.	033-8248	[8]	CLIP (LOOP)
37.	9M-8406	[2]	CLIP (LOOP)
38.	4D-7794	[11]	CLIP
40.	118-3909 Y	[1]	SENSOR GP-TEMPERATURE (AMBIENT AIR)
41.	5B-2183	[1]	NUT-JAM (9/16-18-THD)
42.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
43.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
44.	4K-8864	[4]	CLIP (LOOP)
45.	107-6689 Y	[1]	LAMP GP-FLOOD (24-VOLT)
46.	4P-8134	[1]	CLIP (LADDER)
47.	130-6469	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
48.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
49.	6V-9189 M	[1]	LOCKNUT (M8X1.25-THD)
50.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
51.	115-3072	[1]	CLIP AS-CONNECTING (8-PIN)
52.	4D-1836	[1]	SWITCH-TOGGLE (LADDER LAMP)
53.	5P-9085	[1]	CLIP (LOOP)
54.	7D-1553	[1]	CLIP
55.	7K-1181	[7]	STRAP-CABLE
56.	8M-2770	[3]	CLIP (LOOP)
57.	9U-2277	[1]	CLIP AS
58.	092-7385	[2]	CLIP
59.	8T-4182 M	[6]	BOLT (M10X1.5X45-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

136-2002: WIRING GP-ENCLOSURE

WIRING GP-ENCLOSURE

136-2002 WIRING GP-ENCLOSURE -LH
S/N 4CS208-UP
PART OF 187-2916 ENCLOSURE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	225-9591 C	[1]	HARNESS AS-CHASSIS (MAIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	3T-3410	[1]	RECEPTACLE AS-CONNECTOR (37-PIN)
	8N-1513	[1]	RECEPTACLE AS-CONNECTOR (37-PIN)
	8N-1514	[1]	PLUG AS-CONNECTOR (37-PIN)
	8N-1525	[1]	PLUG AS-CONNECTOR (20-PIN)
2.	194-6831	[1]	HARNESS AS-CHASSIS (CAB, FRAME)
	3T-3043	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
	3T-3044	[1]	PLUG AS-CONNECTOR (25-PIN)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
3.	140-9815	[1]	PLATE
4.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
5.	115-3070	[2]	CLIP AS-CONNECTING (4-PIN)
6.	109-2119	[1]	GUARD AS
7.	4D-1836	[1]	SWITCH-TOGGLE (GROUND LEVEL SHUTDOWN)
7A.	4D-1836	[1]	SWITCH-TOGGLE (STAIRWAY ACCESS LIGHTS)
8.	112-6797	[1]	PLATE
9.	3E-5169	[1]	GUARD-SWITCH
10.	8X-5804	[2]	STRAP AS-GROUND
11.	8T-4179 M	[4]	BOLT (M12X1.75X20-MM)
12.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	102-1400 Y	[1]	SENSOR GP-PRESSURE (AUTOLUBE)
14.	8T-7087	[1]	GROMMET (34-MM ID)
15.	5P-7468	[1]	CLIP (SLOT)
16.	5P-7469	[1]	CLIP (TAB)
17.	3E-2337	[1]	ADAPTER
18.	7J-0204	[1]	SEAL-O-RING
19.	6V-8397	[1]	SEAL-O-RING
20.	9X-3495	[2]	CLIP AS
21.	118-5051	[1]	PLATE
22.	4H-2558	[1]	GROMMET
23.	9G-9150 C	[1]	CLIP
24.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(SERVICE LIGHT)
	3L-8187	[2]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
25.	3S-2093	[11]	STRAP-CABLE
26.	101-0461 Y	[1]	LAMP GP-WORKING (ENCLOSURE)(HYD OIL COOLER ROOM)
27.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
28.	5C-2890 M	[3]	NUT (M6X1-THD)
29.	5P-4115	[1]	WASHER-HARD (7.2X19X2-MM THK)
30.	8T-4137 M	[30]	BOLT (M10X1.5X20-MM)
31.	8T-4121	[47]	WASHER-HARD (11X21X2.5-MM THK)
32.	092-7385	[2]	CLIP
33.	4S-4455	[6]	CLIP
34.	033-8248	[8]	CLIP (LOOP)
35.	5P-9085	[1]	CLIP (LOOP)
36.	7D-1553	[1]	CLIP
37.	9M-8406	[2]	CLIP (LOOP)
38.	4D-7794	[11]	CLIP
39.	9U-2277	[1]	CLIP AS
40.	118-3909 Y	[1]	SENSOR GP-TEMPERATURE (AMBIENT AIR)
41.	5B-2183	[1]	NUT-JAM (9/16-18-THD)
42.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
43.	8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
44.	4K-8864	[4]	CLIP (LOOP)
45.	107-6689 Y	[1]	LAMP GP-FLOOD (24-VOLT)(FRONT-LOWER)
46.	4P-8134	[1]	CLIP (LADDER)
47.	130-6469	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
48.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
49.	6V-9189 M	[1]	LOCKNUT (M8X1.25-THD)
50.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
51.	115-3072	[1]	CLIP AS-CONNECTING (8-PIN)
52.	8M-2770	[3]	CLIP (LOOP)
53.	7K-1181	[7]	STRAP-CABLE
54.	8T-4182 M	[6]	BOLT (M10X1.5X45-MM)
55.	130-5300 C	[2]	CLIP
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

187-3096: WIRING GP-ENCLOSURE

WIRING GP-ENCLOSURE

187-3096 WIRING GP-ENCLOSURE -LADDER SENSOR-LH
S/N 4CS173-207
PART OF 187-2916 ENCLOSURE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	116-2267 Y	[1]	SWITCH GP-POSITION (LADDER)
3.	123-9146	[1]	PLATE
4.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
5.	6V-8918	[2]	BOLT (5/16-18X1.25-IN)
6.	7X-7729	[4]	WASHER (11X25X3-MM THK)
7.	8P-8540	[1]	GROMMET
8.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
9.	9G-9152	[1]	CLIP
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Technical Information Bulletin

Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Throttle Position Sensor
3508B Engine for Caterpillar Built Machines

Hardware and Schematics
Oil Renewal System for Off-Highway Trucks

Engine Speed Controlled by the Transmission ECM
3508B Engine for Caterpillar Built Machines

Controlled Throttle Shift/Direction Shift Management
3508B Engine for Caterpillar Built Machines

Decelerator Pedal
3508B Engine for Caterpillar Built Machines

Engine Oil Pressure
3508B Engine for Caterpillar Built Machines

Permanent Timing Calibration Sensor
3508B Engine for Caterpillar Built Machines

Atmospheric Pressure Sensor
3508B Engine for Caterpillar Built Machines

Engine Oil Pressure
3500B Engines

Hardware and Schematics
Oil Renewal System

Axle Protection
3508B Engine for Caterpillar Built Machines

Engine Oil Pressure
3508B Engine for Caterpillar Built Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System
3508B Engine for Caterpillar Built Machines

Troubleshooting

MID 036 - CID 0091 - FMI 08 Throttle Position signal abnormal
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0101 - FMI 03 Crankcase Pressure open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0101 - FMI 04 Crankcase Pressure short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0262 - FMI 04 5 Volt Sensor DC Power Supply short to ground
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0262 - FMI 03 5 Volt Sensor DC Power Supply short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0263 - FMI 03 Digital Sensor Supply short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0263 - FMI 04 Digital Sensor Supply short to ground
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0274 - FMI 04 Atmospheric Pressure short to ground
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0274 - FMI 13 Atmospheric Pressure calibration required
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0827 - FMI 08 Left Exhaust Temperature signal abnormal
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0261 - FMI 13 Engine Timing calibration required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0101 - FMI 13 Crankcase Pressure calibration required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0110 - FMI 04 Engine Coolant Temperature short to ground
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0168 - FMI 01 System Voltage Low
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0168 - FMI 02 System Voltage intermittent/erratic
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0274 - FMI 03 Atmospheric Pressure open/short to +batt
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0542 - FMI 13 Unfiltered Engine Oil Pressure cal required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0100 - FMI 13 Engine Oil Pressure calibration required
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0542 - FMI 02 Unfiltered Engine Oil Pressure misinstalled
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0190 - FMI 02 Loss of Engine Speed signal
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0190 - FMI 03 Engine Speed open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0190 - FMI 08 Engine Speed signal abnormal
3500B Engines for 5130B and 5230B Excavators

Engine Speed/Timing Sensor
3500B Engines for 5130B and 5230B Excavators

Analog Sensor - Calibrate
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

Analog Sensor Supply
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Digital Sensor Supply
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Electrical Connectors and Functions
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Engine Speed/Timing Sensor - Calibrate
3500B Engines for 5130B and 5230B Excavators

Throttle Position Sensor
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Engine Sensor Open/Short Test
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Electrical Connectors and Functions
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0091 - FMI 00 Throttle Switch not released
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0264 - FMI 08 Decel Throttle Position signal abnormal
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0277 - FMI 08 Timing Calibration signal abnormal
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0290 - FMI 03 Engine Fan Pump Pressure open/short to +batt
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0290 - FMI 04 Engine Fan Pump Pressure short to ground
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0861 - FMI 05 Service Engine Lamp open/short to +batt
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0861 - FMI 06 Service Engine Lamp short to ground
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0865 - FMI 05 Engine Exhaust Temp Lamp open/short to +batt
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0865 - FMI 06 Engine Exhaust Temp Lamp short to ground
3508B Engine for D11R Track-Type Tractors

Analog Sensor Supply
3508B Engine for D11R Track-Type Tractors

Decelerator Position Sensor
3508B Engine for D11R Track-Type Tractors

Digital Sensor Supply
3508B Engine for D11R Track-Type Tractors

Engine Speed/Timing Sensor - Calibrate
3508B Engine for D11R Track-Type Tractors

Engine Speed/Timing Sensor
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0091 - FMI 02 Incorrect Throttle Switch inputs
3508B Engine for D11R Track-Type Tractors

Electrical Connectors and Functions
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

Throttle Position Sensor
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

Engine Sensor Open/Short Test
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0542 - FMI 03 Unfiltered Engine Oil Pressure open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Engine Sensor Open/Short Test
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0828 - FMI 08 Right Exhaust Temperature signal abnormal
3500B Engines for 5130B and 5230B Excavators

Analog Sensor Supply
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

Engine Speed/Timing Sensor
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

Permanent Timing Calibration Sensor
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0091 - FMI 02 Incorrect Throttle Switch inputs
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0580 - FMI 03 Power Shift Pres Sensor open/short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0580 - FMI 04 Power Shift Pres Sensor short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0580 - FMI 08 Power Shift Pres Sensor signal is abnormal
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0581 - FMI 05 Power Shift Solenoid open circuit
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0581 - FMI 06 Power Shift Solenoid short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0581 - FMI 13 Power Shift Solenoid cal required
3500B Engines for 5130B and 5230B Excavators

Electrical Connectors and Functions
3500B Engines for 5130B and 5230B Excavators

Analog Sensor Supply
3500B Engines for 5130B and 5230B Excavators

Digital Sensor Supply
3500B Engines for 5130B and 5230B Excavators

Power Shift Solenoid Circuit - Test
3500B Engines for 5130B and 5230B Excavators

Power Shift Solenoid - Calibrate
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0290 - FMI 03 Engine Fan Pump Pressure open/short to +batt
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0290 - FMI 04 Engine Fan Pump Pressure short to ground
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 1076 - FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 1076 - FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3508B Engine for D11R Track-Type Tractors

Engine Cooling Fan Bypass Solenoid
3508B Engine for D11R Track-Type Tractors

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

137-9588 WIRING GP-CHASSIS -COLD WEATHER S/N 4CS1-UP 240 VOLT PART OF 140-3003 STARTING AR-COLD WEATHER AN ATTACHMENT 5130B

ELECTRICAL AND STARTING SYSTEM

137-9588: WIRING GP-CHASSIS

Parts for your 5130B MINING EXCAVATOR:

137-9587: WIRING GP-COLD WEATHER

Parts for your 5130B MINING EXCAVATOR:

137-9587: WIRING GP-COLD WEATHER

Parts for your 5130B MINING EXCAVATOR:

136-2003: WIRING GP-ELECTRONIC CONTROL

Parts for your 5130B MINING EXCAVATOR:

187-1691: WIRING GP-ELECTRONIC CONTROL

Parts for your 5130B MINING EXCAVATOR:

187-1691: WIRING GP-ELECTRONIC CONTROL

Parts for your 5130B MINING EXCAVATOR:

187-1691: WIRING GP-ELECTRONIC CONTROL

Parts for your 5130B MINING EXCAVATOR:

136-2002: WIRING GP-ENCLOSURE

Parts for your 5130B MINING EXCAVATOR:

136-2002: WIRING GP-ENCLOSURE

Parts for your 5130B MINING EXCAVATOR:

187-3096: WIRING GP-ENCLOSURE

Parts for your 5130B MINING EXCAVATOR:

Information:

Caterpillar Parts SIS Catalog 5130B :

Truck sale: