187-3096 WIRING GP-ENCLOSURE -LADDER SENSOR-LH S/N 4CS208-UP PART OF 187-2916 ENCLOSURE AR 5130B MINING EXCAVATOR

187-3096: WIRING GP-ENCLOSURE

187-3096 WIRING GP-ENCLOSURE -LADDER SENSOR-LH
S/N 4CS208-UP
PART OF 187-2916 ENCLOSURE AR

Parts for your 5130B MINING EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	174-7165 CY	[1]	SWITCH GP-POSITION (LADDER)
3.	123-9146	[1]	PLATE
4.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
5.	6V-8918	[2]	BOLT (5/16-18X1.25-IN)
6.	7X-7729	[4]	WASHER (11X25X3-MM THK)
7.	8P-8540	[1]	GROMMET
8.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
9.	130-5300 C	[1]	CLIP
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

190-5358: WIRING GP-ENCLOSURE

WIRING GP-ENCLOSURE

190-5358 WIRING GP-ENCLOSURE -RH
S/N 4CS173-210
PART OF 187-8877 HOOD & GUARD AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-1998	[1]	HARNESS AS-LIGHTING (FLOODLIGHT)(FLOOD LAMPS)
	155-2270		KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
2.	187-6607	[1]	HARNESS AS (PUMP COMPARTMENT)
	102-8802		KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(COMPARTMENT LAMP)
4.	115-3069	[1]	CLIP AS-CONNECTING (3-PIN)
5.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
6.	6V-6649 Y	[1]	MODULE GP-VIDS/VIMS INTERFACE
7.	108-7696	[2]	BAR
8.	7X-0818 M	[4]	BOLT (M8X1.25X45-MM)
9.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
10.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
11.	8T-9658	[4]	SPACER (8.2X12.7X25.4-MM THK)
12.	8T-9655	[8]	MOUNT-ISOLATION
13.	3J-1907	[1]	SEAL-O-RING
14.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
15.	8T-7087	[1]	GROMMET (34-MM ID)
16.	5P-7468	[1]	CLIP (SLOT)
17.	5P-7469	[1]	CLIP (TAB)
18.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
19.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
20.	115-3070	[1]	CLIP AS-CONNECTING (4-PIN)
21.	9G-9150	[2]	CLIP
22.	101-0461 Y	[2]	LAMP GP-WORKING (ENCLOSURE)
23.	5C-2890 M	[6]	NUT (M6X1-THD)
24.	4H-2558	[8]	GROMMET
25.	9U-2277	[3]	CLIP AS
26.	115-3073	[2]	CLIP AS-CONNECTING
27.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
28.	4D-1836	[1]	SWITCH-TOGGLE (ENGINE SHUTOFF)
29.	4P-7581	[9]	CLIP (LADDER)
30.	170-6105 Y	[1]	SENSOR GP-PRESSURE (SWING PRESSURE)
31.	3S-2093	[58]	STRAP-CABLE
32.	115-3072	[1]	CLIP AS-CONNECTING (8-PIN)
33.	5C-7261 M	[1]	NUT (M8X1.25-THD)
34.	3E-5169	[1]	GUARD-SWITCH
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

190-5358: WIRING GP-ENCLOSURE

WIRING GP-ENCLOSURE

190-5358 WIRING GP-ENCLOSURE -RH
S/N 4CS211-UP
PART OF 187-8877 HOOD & GUARD AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-1998	[1]	HARNESS AS-LIGHTING (FLOODLIGHT)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
2.	232-4659 C	[1]	HARNESS AS-CHASSIS (PUMP COMPARTMENT)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[4]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	106-8629	[4]	RECEPTACLE AS (3-PIN)
3.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(SERVICE LIGHT)
	3L-8187	[2]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
4.	115-3069	[1]	CLIP AS-CONNECTING (3-PIN)
5.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
6.	6V-6649 Y	[1]	MODULE GP-VIDS/VIMS INTERFACE
7.	108-7696	[2]	BAR
8.	7X-0818 M	[4]	BOLT (M8X1.25X45-MM)
9.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
10.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
11.	8T-9658	[4]	SPACER (8.2X12.7X25.4-MM THK)
12.	8T-9655	[8]	MOUNT-ISOLATION
13.	3J-1907	[1]	SEAL-O-RING
14.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
15.	8T-7087	[1]	GROMMET (34-MM ID)
16.	5P-7468	[1]	CLIP (SLOT)
17.	5P-7469	[1]	CLIP (TAB)
18.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
19.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
20.	115-3070	[1]	CLIP AS-CONNECTING (4-PIN)
21.	9G-9150	[2]	CLIP
22.	101-0461 Y	[2]	LAMP GP-WORKING (ENCLOSURE)(PUMP ROOM)
23.	5C-2890 M	[6]	NUT (M6X1-THD)
24.	4H-2558	[8]	GROMMET
25.	9U-2277	[3]	CLIP AS
26.	115-3073	[2]	CLIP AS-CONNECTING
27.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
28.	4D-1836	[1]	SWITCH-TOGGLE (ENGINE SHUTDOWN)
29.	4P-7581	[9]	CLIP (LADDER)
30.	170-6105 Y	[1]	SENSOR GP-PRESSURE (SWING)
31.	3S-2093	[58]	STRAP-CABLE
32.	115-3072	[1]	CLIP AS-CONNECTING (8-PIN)
33.	5C-7261 M	[1]	NUT (M8X1.25-THD)
34.	3E-5169	[1]	GUARD-SWITCH
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

135-3081: WIRING GP-ENGINE

WIRING GP-ENGINE

135-3081 WIRING GP-ENGINE
S/N 2GR1-796
PART OF 135-0135 ENGINE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-7581	[12]	CLIP (LADDER)
2.	4P-8134	[28]	CLIP (LADDER)
3.	127-1008 Y	[1]	SENSOR GP-SPEED (ENGINE/TIMING)
4.	9X-6772	[51]	STRAP-CABLE
5.	0S-0509	[13]	BOLT (3/8-16X0.75-IN)
6.	5M-2894	[25]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7.	4P-7428	[1]	CLIP (LADDER)
8.	135-3082	[1]	HARNESS AS-WIRING
9.	3E-6428 Y	[1]	SWITCH GP-FLOW (ENGINE COOLANT)
10.	4E-0718	[1]	WIRE AS
11.	2V-3216	[1]	CLIP
12.	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	0S-1620	[1]	BOLT (1/2-13X0.75-IN)
14.	103-6093 Y	[1]	SENSOR GP-PRESSURE (CRANKCASE)
14A.	103-6093 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
15.	5V-6949	[1]	STRIP
16.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
17.	9S-8752	[4]	NUT-FULL (3/8-16-THD)
18.	2A-1531	[2]	BOLT (1/2-13X6.5-IN)
19.	0S-1588	[7]	BOLT (3/8-16X1.25-IN)
20.	0S-1621	[2]	BOLT (1/2-13X1-IN)
21.	117-0067	[2]	ELBOW
22.	0S-1594	[2]	BOLT (3/8-16X1-IN)
23.	9X-0263	[1]	ADAPTER
24.	8D-9059	[1]	BRACKET
25.	098-9852	[1]	BAR
26.	6K-8179	[2]	CLIP
27.	8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
28.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
29.	109-4367 Y	[2]	SENSOR GP-EXHAUST TEMPERATURE
30.	115-3069	[3]	CLIP AS-CONNECTING (3-PIN)
31.	6V-5048	[8]	SEAL-O-RING
32.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(AFTERCOOLER)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
32A.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(ENGINE COOLANT)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
33.	7E-5326	[1]	COVER
34.	3K-6905	[1]	VALVE-BREATHER
35.	116-9933	[1]	SWITCH AS-PRESSURE (FUEL FILTER DIFFERENTIAL)
	2M-9780	[1]	SEAL-O-RING
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	6V-3922	[1]	SEAL-O-RING
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (14CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
36.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
37.	8L-2786	[1]	SEAL-O-RING
38.	103-6092 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL UNFILTERED)
38A.	103-6092 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL FILTERED)
39.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
40.	7E-6016	[1]	GASKET
41.	1W-8129	[1]	SUPPORT
42.	9X-0262	[3]	ADAPTER
43.	8T-9364	[4]	BOLT (1/4-20X0.625-IN)
44.	8T-4205	[8]	WASHER-HARD (7.2X14.5X2-MM THK)
45.	3E-5169	[1]	GUARD-SWITCH
46.	6V-8185	[4]	NUT (1/4-20-THD)
47.	4D-1836	[1]	SWITCH-TOGGLE (ENGINE SHUTDOWN)
48.	0T-0055	[2]	BOLT (3/8-16X4.25-IN)
49.	123-2993 Y	[1]	SWITCH GP-LIQUID LEVEL (LOW ENGINE OIL)
50.	117-0069	[1]	BLOCK-SENSOR MOUNTING
51.	4N-3841	[1]	GASKET
52.	117-0068 I	[1]	HOSE AS
53.	121-5729	[1]	ELBOW
54.	124-0289	[2]	CLIP
55.	7E-7731	[4]	MOUNT
56.	141-7095	[1]	PLATE-SWITCH
57.	141-7091	[1]	BRACKET
58.	3H-7654	[1]	WASHER-HARD (13.5X22.5X3-MM THK)
59.	103-6091	[1]	SENSOR GP-PRESSURE (TURBO OUTLET)
	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
	186-3736	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (34CM)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(KIT INCLUDES PLUG AS. & WEDGE)
60.	3K-0360	[1]	SEAL-O-RING
61.	2M-9780	[1]	SEAL-O-RING
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

135-3081: WIRING GP-ENGINE

WIRING GP-ENGINE

135-3081 WIRING GP-ENGINE
S/N 2GR797-1121
PART OF 135-0135 ENGINE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-7581	[12]	CLIP (LADDER)
2.	4P-8134	[28]	CLIP (LADDER)
3.	127-1008 Y	[1]	SENSOR GP-SPEED (ENGINE/TIMING)
4.	9X-6772 C	[52]	STRAP-CABLE
5.	0S-0509 C	[12]	BOLT (3/8-16X0.75-IN)
6.	5M-2894 C	[20]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7.	4P-7428	[1]	CLIP (LADDER)
8.	141-7198 C	[1]	HARNESS AS-WIRING
9.	3E-6428 Y	[1]	SWITCH GP-FLOW (ENGINE COOLANT)
10.	4E-0718	[1]	WIRE AS
11.	2V-3216	[1]	CLIP
12.	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	0S-1620	[1]	BOLT (1/2-13X0.75-IN)
14.	103-6093 Y	[1]	SENSOR GP-PRESSURE (CRANKCASE)
14A.	103-6093 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
15.	5V-6949	[1]	STRIP
16.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
17.	9S-8752 C	[1]	NUT-FULL (3/8-16-THD)
18.	2A-1531	[2]	BOLT (1/2-13X6.5-IN)
19.	0S-1588 C	[5]	BOLT (3/8-16X1.25-IN)
20.	0S-1621	[2]	BOLT (1/2-13X1-IN)
21.	117-0067	[2]	ELBOW
22.	0S-1594	[2]	BOLT (3/8-16X1-IN)
23.	9X-0263	[1]	ADAPTER
24.	8D-9059	[1]	BRACKET
25.	098-9852	[1]	BAR
26.	6K-8179	[2]	CLIP
27.	8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
28.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
29.	109-4367 Y	[2]	SENSOR GP-EXHAUST TEMPERATURE
30.	115-3069	[3]	CLIP AS-CONNECTING (3-PIN)
31.	6V-5048	[8]	SEAL-O-RING
32.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(AFTERCOOLER)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
32A.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(ENGINE COOLANT)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
33.	7E-5326	[1]	COVER
34.	3K-6905	[1]	VALVE-BREATHER
35.	116-9933	[1]	SWITCH AS-PRESSURE (FUEL FILTER DIFFERENTIAL)
	2M-9780	[1]	SEAL-O-RING
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	6V-3922	[1]	SEAL-O-RING
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (14CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
36.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
37.	8L-2786	[1]	SEAL-O-RING
38.	103-6092 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL UNFILTERED)
38A.	103-6092 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL FILTERED)
39.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
40.	7E-6016	[1]	GASKET
42.	9X-0262	[3]	ADAPTER
49.	123-2993 Y	[1]	SWITCH GP-LIQUID LEVEL (LOW ENGINE OIL)
50.	117-0069	[1]	BLOCK-SENSOR MOUNTING
51.	4N-3841	[1]	GASKET
52.	117-0068 I	[1]	HOSE AS
53.	121-5729	[1]	ELBOW
54.	124-0289	[2]	CLIP
58.	3H-7654	[1]	WASHER-HARD (13.5X22.5X3-MM THK)
59.	103-6091	[1]	SENSOR GP-PRESSURE (TURBO OUTLET)
	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
	186-3736	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (34CM)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(KIT INCLUDES PLUG AS. & WEDGE)
60.	3K-0360	[1]	SEAL-O-RING
61.	2M-9780	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

135-3081: WIRING GP-ENGINE

WIRING GP-ENGINE

135-3081 WIRING GP-ENGINE
S/N 2GR1122-1237
PART OF 135-0135 ENGINE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-7581 C	[15]	CLIP (LADDER)
2.	4P-8134 C	[27]	CLIP (LADDER)
3.	129-6628 CY	[1]	SENSOR GP-SPEED (ENGINE/TIMING)
4.	9X-6772 C	[54]	STRAP-CABLE
5.	0S-0509 C	[14]	BOLT (3/8-16X0.75-IN)
6.	5M-2894 C	[22]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7.	4P-7428	[1]	CLIP (LADDER)
8.	153-7461 C	[1]	HARNESS AS-WIRING
9.	3E-6428 Y	[1]	SWITCH GP-FLOW (ENGINE COOLANT)
10.	153-7485 C	[1]	WIRE AS-GROUND
11.	2V-3216	[1]	CLIP
12.	5P-8245 C	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	0S-1620	[1]	BOLT (1/2-13X0.75-IN)
14.	143-9696 CY	[1]	SENSOR GP-PRESSURE (CRANKCASE)
14A.	143-9696 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
15.	5V-6949	[1]	STRIP
16.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
17.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
18.	2A-1531	[2]	BOLT (1/2-13X6.5-IN)
19.	0S-1588	[5]	BOLT (3/8-16X1.25-IN)
20.	0S-1621	[2]	BOLT (1/2-13X1-IN)
21.	117-0067	[2]	ELBOW
22.	0S-1594	[2]	BOLT (3/8-16X1-IN)
23.	9X-0263	[1]	ADAPTER
24.	8D-9059	[1]	BRACKET
25.	098-9852	[1]	BAR
26.	6K-8179	[2]	CLIP
27.	8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
28.	7W-6492 C	[1]	PLUG-PIPE (1/2-14-THD)
29.	109-4367 Y	[2]	SENSOR GP-EXHAUST TEMPERATURE
30.	115-3069 C	[4]	CLIP AS-CONNECTING (3-PIN)
31.	6V-5048	[8]	SEAL-O-RING
32.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(AFTERCOOLER)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
32A.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(ENGINE COOLANT)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
33.	7E-5326	[1]	COVER
34.	3K-6905	[1]	VALVE-BREATHER
35.	143-9694 CY	[1]	SENSOR GP-PRESSURE (TURBO OUTLET)
36.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
37.	8L-2786	[1]	SEAL-O-RING
38.	144-5661 C	[1]	SWITCH AS-PRESSURE (FUEL FILTER DIFFERENTIAL)
	9X-1813 E		SLEEVE (14CM)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	2M-9780	[1]	SEAL-O-RING
	6V-3922	[1]	SEAL-O-RING
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
39.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
40.	7E-6016	[1]	GASKET
41.	1B-9575 C	[2]	BOLT (5/16-18X1.56-IN)
42.	9X-0262	[3]	ADAPTER
43.	3E-4352 C	[2]	WASHER-HARD (8.8X20.5X2.5-MM THK)
44.	143-9695 CY	[1]	SENSOR GP-PRESSURE (ENGINE OIL UNFILTERED)
44A.	143-9695 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL FILTERED)
45.	6V-1889 C	[2]	CLIP (LOOP)
46.	2H-3855 C	[1]	BOLT (1/2-13X0.875-IN)
49.	123-2993 Y	[1]	SWITCH GP-LIQUID LEVEL (LOW ENGINE OIL)
50.	117-0069	[1]	BLOCK-SENSOR MOUNTING
51.	4N-3841	[1]	GASKET
52.	117-0068 I	[1]	HOSE AS
53.	121-5729	[1]	ELBOW
54.	124-0289	[2]	CLIP
58.	3H-7654	[1]	WASHER-HARD (13.5X22.5X3-MM THK)
60.	3K-0360	[1]	SEAL-O-RING
61.	2M-9780	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

135-3081: WIRING GP-ENGINE

WIRING GP-ENGINE

135-3081 WIRING GP-ENGINE
S/N 2GR1238-1945
PART OF 135-0135 ENGINE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-7581	[15]	CLIP (LADDER)
2.	4P-8134	[29]	CLIP (LADDER)
3.	129-6628 Y	[1]	SENSOR GP-SPEED (ENGINE/TIMING)
4.	9X-6772	[58]	STRAP-CABLE
5.	0S-0509	[14]	BOLT (3/8-16X0.75-IN)
6.	5M-2894	[24]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7.	4P-7428	[1]	CLIP (LADDER)
8.	153-7461	[1]	HARNESS AS-WIRING
9.	3E-6430 CY	[1]	SWITCH GP-FLOW (ENGINE COOLANT)
10.	153-7485	[1]	WIRE AS-GROUND
11.	2V-3216	[1]	CLIP
12.	5P-8245	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	0S-1620	[1]	BOLT (1/2-13X0.75-IN)
14.	143-9696 Y	[1]	SENSOR GP-PRESSURE (CRANKCASE)
14A.	143-9696 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
15.	5V-6949	[1]	STRIP
16.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
17.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
18.	2A-1531	[2]	BOLT (1/2-13X6.5-IN)
19.	0S-1588	[5]	BOLT (3/8-16X1.25-IN)
20.	0S-1621	[2]	BOLT (1/2-13X1-IN)
21.	117-0067	[2]	ELBOW
22.	0S-1594	[6]	BOLT (3/8-16X1-IN)
23.	9X-0263	[1]	ADAPTER
24.	8D-9059	[1]	BRACKET
25.	098-9852	[1]	BAR
26.	6K-8179	[2]	CLIP
27.	8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
28.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
29.	163-7882	[2]	SENSOR GP-EXHAUST TEMPERATURE
30.	115-3069	[4]	CLIP AS-CONNECTING (3-PIN)
31.	6V-5048	[8]	SEAL-O-RING
32.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(AFTERCOOLER)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
32A.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(ENGINE COOLANT)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
33.	7E-5326	[1]	COVER
34.	3K-6905	[1]	VALVE-BREATHER
35.	143-9694 Y	[1]	SENSOR GP-PRESSURE (TURBO OUTLET)
36.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
37.	8L-2786	[1]	SEAL-O-RING
38.	144-5661	[1]	SWITCH AS-PRESSURE (FUEL FILTER DIFFERENTIAL)
	9X-1813 E		SLEEVE (14CM)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	2M-9780	[1]	SEAL-O-RING
	6V-3922	[1]	SEAL-O-RING
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
39.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
40.	7E-6016	[1]	GASKET
42.	9X-0262	[3]	ADAPTER
44.	143-9695 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL UNFILTERED)
44A.	143-9695 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL FILTERED)
45.	6V-1889	[2]	CLIP (LOOP)
46.	2H-3855	[1]	BOLT (1/2-13X0.875-IN)
49.	123-2993 Y	[1]	SWITCH GP-LIQUID LEVEL (LOW ENGINE OIL)
50.	117-0069	[1]	BLOCK-SENSOR MOUNTING
51.	4N-3841	[1]	GASKET
52.	117-0068 I	[1]	HOSE AS
53.	121-5729	[1]	ELBOW
54.	124-0289	[2]	CLIP
58.	3H-7654	[1]	WASHER-HARD (13.5X22.5X3-MM THK)
60.	3K-0360	[1]	SEAL-O-RING
61.	2M-9780	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

135-3081: WIRING GP-ENGINE

WIRING GP-ENGINE

135-3081 WIRING GP-ENGINE
S/N 2GR1946-1948
PART OF 135-0135 ENGINE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-7581 C	[12]	CLIP (LADDER)
2.	4P-8134 C	[28]	CLIP (LADDER)
3.	129-6628 Y	[1]	SENSOR GP-SPEED (ENGINE/TIMING)
4.	9X-6772 C	[63]	STRAP-CABLE
5.	0S-0509 C	[15]	BOLT (3/8-16X0.75-IN)
6.	5M-2894 C	[25]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7.	4P-7428 C	[7]	CLIP (LADDER)
8.	153-7461	[1]	HARNESS AS-WIRING
9.	3E-6430 Y	[1]	SWITCH GP-FLOW (ENGINE COOLANT)
10.	153-7485	[1]	WIRE AS-GROUND
11.	2V-3216	[1]	CLIP
12.	5P-8245	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	0S-1620	[1]	BOLT (1/2-13X0.75-IN)
14.	161-9929 CY	[1]	SENSOR GP-PRESSURE (TURBO OUTLET)
15.	5V-6949	[1]	STRIP
16.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
17.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
18.	2A-1531	[2]	BOLT (1/2-13X6.5-IN)
19.	0S-1588	[5]	BOLT (3/8-16X1.25-IN)
20.	0S-1621	[2]	BOLT (1/2-13X1-IN)
21.	117-0067	[2]	ELBOW
22.	0S-1594	[6]	BOLT (3/8-16X1-IN)
23.	9X-0263	[1]	ADAPTER
24.	8D-9059	[1]	BRACKET
25.	098-9852	[1]	BAR
26.	6K-8179	[2]	CLIP
27.	8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
28.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
29.	163-7882	[2]	SENSOR GP-EXHAUST TEMPERATURE
30.	115-3069	[4]	CLIP AS-CONNECTING (3-PIN)
31.	6V-5048	[8]	SEAL-O-RING
32.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(AFTERCOOLER)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31 CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
32A.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(ENGINE COOLANT)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31 CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
33.	7E-5326	[1]	COVER
34.	3K-6905	[1]	VALVE-BREATHER
36.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
37.	8L-2786	[1]	SEAL-O-RING
38.	144-5661	[1]	SWITCH AS-PRESSURE (FUEL FILTER DIFFERENTIAL)
	9X-1813 E		SLEEVE (14CM)
	2M-9780	[1]	SEAL-O-RING
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	6V-3922	[1]	SEAL-O-RING
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
39.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
40.	7E-6016	[1]	GASKET
41.	161-9926 CY	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
41A.	161-9926 CY	[1]	SENSOR GP-PRESSURE (CRANKCASE)
42.	9X-0262	[3]	ADAPTER
43.	161-9931 CY	[1]	SENSOR GP-PRESSURE (ENGINE OIL UNFILTERED)
43A.	161-9931 CY	[1]	SENSOR GP-PRESSURE (ENGINE OIL FILTERED)
45.	6V-1889	[2]	CLIP (LOOP)
46.	2H-3855	[1]	BOLT (1/2-13X0.875-IN)
49.	123-2993 Y	[1]	SWITCH GP-LIQUID LEVEL (LOW ENGINE OIL)
50.	117-0069	[1]	BLOCK-SENSOR MOUNTING
51.	4N-3841	[1]	GASKET
52.	117-0068 I	[1]	HOSE AS
53.	121-5729	[1]	ELBOW
54.	124-0289	[2]	CLIP
58.	3H-7654	[1]	WASHER-HARD (13.5X22.5X3-MM THK)
60.	3K-0360	[1]	SEAL-O-RING
61.	2M-9780	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

135-3081: WIRING GP-ENGINE

WIRING GP-ENGINE

135-3081 WIRING GP-ENGINE
S/N 2GR1949-3296
PART OF 135-0135 ENGINE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-7581	[12]	CLIP (LADDER)
2.	4P-8134	[28]	CLIP (LADDER)
3.	129-6628 Y	[1]	SENSOR GP-SPEED (ENGINE/TIMING)
4.	9X-6772	[63]	STRAP-CABLE
5.	0S-0509	[15]	BOLT (3/8-16X0.75-IN)
6.	5M-2894	[25]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7.	4P-7428	[7]	CLIP (LADDER)
8.	153-7461	[1]	HARNESS AS-WIRING
9.	171-8709 CY	[1]	SWITCH GP-FLOW (ENGINE COOLANT)
10.	153-7485	[1]	WIRE AS-GROUND
11.	2V-3216	[1]	CLIP
12.	5P-8245	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	0S-1620	[1]	BOLT (1/2-13X0.75-IN)
14.	161-9929 Y	[1]	SENSOR GP-PRESSURE (TURBO OUTLET)
15.	5V-6949	[1]	STRIP
16.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
17.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
18.	2A-1531	[2]	BOLT (1/2-13X6.5-IN)
19.	0S-1588	[5]	BOLT (3/8-16X1.25-IN)
20.	0S-1621	[2]	BOLT (1/2-13X1-IN)
21.	117-0067	[2]	ELBOW
22.	0S-1594	[6]	BOLT (3/8-16X1-IN)
23.	9X-0263	[1]	ADAPTER
24.	8D-9059	[1]	BRACKET
25.	098-9852	[1]	BAR
26.	6K-8179	[2]	CLIP
27.	8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
28.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
29.	163-7882	[2]	SENSOR GP-EXHAUST TEMPERATURE
30.	115-3069	[4]	CLIP AS-CONNECTING (3-PIN)
31.	6V-5048	[8]	SEAL-O-RING
32.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(AFTERCOOLER)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31 CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
32A.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(ENGINE COOLANT)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31 CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
33.	7E-5326	[1]	COVER
34.	3K-6905	[1]	VALVE-BREATHER
36.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
37.	8L-2786	[1]	SEAL-O-RING
38.	144-5661	[1]	SWITCH AS-PRESSURE (FUEL FILTER DIFFERENTIAL)
	9X-1813 E		SLEEVE (14CM)
	2M-9780	[1]	SEAL-O-RING
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	6V-3922	[1]	SEAL-O-RING
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE
39.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
40.	7E-6016	[1]	GASKET
41.	161-9926 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
41A.	161-9926 Y	[1]	SENSOR GP-PRESSURE (CRANKCASE)
42.	9X-0262	[3]	ADAPTER
43.	161-9931 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL UNFILTERED)
43A.	161-9931 Y	[1]	SENSOR GP-PRESSURE (ENGINE OIL FILTERED)
45.	6V-1889	[2]	CLIP (LOOP)
46.	2H-3855	[1]	BOLT (1/2-13X0.875-IN)
49.	123-2993 Y	[1]	SWITCH GP-LIQUID LEVEL (LOW ENGINE OIL)
50.	117-0069	[1]	BLOCK-SENSOR MOUNTING
51.	4N-3841	[1]	GASKET
52.	117-0068 I	[1]	HOSE AS
53.	121-5729	[1]	ELBOW
54.	124-0289	[2]	CLIP
58.	3H-7654	[1]	WASHER-HARD (13.5X22.5X3-MM THK)
60.	3K-0360	[1]	SEAL-O-RING
61.	2M-9780	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

135-3081: WIRING GP-ENGINE

WIRING GP-ENGINE

135-3081 WIRING GP-ENGINE
S/N 2GR3297-UP
PART OF 135-0135 ENGINE AR

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-7581	[12]	CLIP (LADDER)
2.	4P-8134	[28]	CLIP (LADDER)
3.	273-5041 Y	[1]	SENSOR GP-SPEED (ENGINE TIMING)
4.	9X-6772	[63]	STRAP-CABLE
5.	0S-0509	[13]	BOLT (3/8-16X0.75-IN)
6.	5M-2894	[25]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7.	4P-7428	[7]	CLIP (LADDER)
8.	153-7461	[1]	HARNESS AS-WIRING
	8T-8827	[1]	BOOT (RED)
	037-5197	[2]	BOOT
	112-3587	[2]	BOOT (40-PIN)
	8N-1521	[2]	BELL AS-END
	3B-3638	[2]	BOOT
	8N-1540	[2]	PIN-CONNECTOR (12-GA TO 14-GA)
	8N-1548	[1]	PIN-CONNECTOR (4-GA)
	8T-8729	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[21]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-6856	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
	110-6847	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
			(EACH PLUG AS INCLUDES)
	1U-9053	[1]	CAPSULE-LUBRICANT
	110-6844	[1]	SEAL
	3T-3044	[1]	PLUG AS-CONNECTOR (25-PIN)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[16]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[6]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	8T-8737	[44]	PLUG-SEAL
	7G-7917	[9]	PLUG-SEAL
	7G-7918	[6]	PLUG-SEAL
	7G-7919	[6]	PLUG-SEAL
	7G-7920	[1]	PLUG-SEAL
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8803	[8]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-6857	[13]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8N-1549	[2]	SOCKET-CONNECTOR (4-GA)
	8T-8730	[116]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-6772	[2]	STRAP-CABLE
	110-8769	[1]	WIRE AS (16-GA)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	2L-8049	[2]	TERMINAL-RING (6-GA, NO. 10 SCREW)
			-OR-
	2L-8057	[2]	TERMINAL-RING (8-GA, NO. 10 SCREW)
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	2L-8081	[2]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
9.	171-8709 Y	[1]	SWITCH GP-FLOW (ENGINE COOLANT)
10.	153-7485	[1]	WIRE AS-GROUND
11.	2V-3216	[1]	CLIP
12.	5P-8245	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	0S-1620	[1]	BOLT (1/2-13X0.75-IN)
14.	194-6724 CY	[1]	SENSOR GP-PRESSURE (TURBOCHARGER OUTLET)
15.	5V-6949	[1]	STRIP
16.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
17.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
18.	2A-1531	[2]	BOLT (1/2-13X6.5-IN)
19.	0S-1588	[5]	BOLT (3/8-16X1.25-IN)
20.	0S-1595	[2]	BOLT (1/2-13X1.25-IN)
21.	117-0067	[1]	ELBOW
22.	0S-1594	[6]	BOLT (3/8-16X1-IN)
23.	9X-0263	[1]	ADAPTER
24.	8D-9059	[1]	BRACKET
25.	098-9852	[1]	BAR
26.	6K-8179	[2]	CLIP
27.	8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
28.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
29.	163-7882 Y	[2]	SENSOR GP-EXHAUST TEMPERATURE
30.	115-3069	[4]	CLIP AS-CONNECTING (3-PIN)
			(EACH INCLUDES)
	8C-3334	[1]	RIVET-TUBULAR
31.	6V-5048	[10]	SEAL-O-RING
32.	102-2240 Y	[1]	SENSOR GP-TEMPERATURE (3-PIN)(AFTERCOOLER)
32A.	102-2240 Y	[1]	SENSOR GP-TEMPERATURE (3-PIN)(ENGINE COOLANT)
33.	7E-5326	[1]	COVER
34.	3K-6905	[1]	VALVE-BREATHER
35.	194-6725 CY	[1]	SENSOR GP-PRESSURE (UNFILTERED ENGINE OIL)
35A.	194-6725 CY	[1]	SENSOR GP-PRESSURE (FILTERED ENGINE OIL)
36.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
38.	255-2282	[1]	SWITCH AS-PRESSURE (FUEL FILTER, DIFFERENTIAL)
	9X-1813 E		SLEEVE (14-CM)
	2M-9780	[1]	SEAL-O-RING
	7J-9108	[1]	SEAL-O-RING
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS. & WEDGE)
39.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
40.	7E-6016	[1]	GASKET
41.	161-9926 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC)
41A.	161-9926 Y	[1]	SENSOR GP-PRESSURE (CRANKCASE)
42.	9X-0262	[3]	ADAPTER
43.	3A-3692 C	[2]	CLIP
44.	9H-8260	[4]	BOLT (1/2-13X6.25-IN)
45.	6V-1889	[2]	CLIP (LOOP)
46.	2H-3855	[1]	BOLT (1/2-13X0.875-IN)
47.	1D-4597	[2]	BOLT (5/8-11X6.5-IN)
48.	172-8660 Y	[1]	SWITCH GP-LIQUID LEVEL (LOW ENGINE OIL)
50.	117-0069	[1]	BLOCK-SENSOR MOUNTING
51.	4N-3841	[1]	GASKET
52.	117-0068 I	[1]	HOSE AS
53.	121-5729	[1]	ELBOW
58.	3H-7654	[1]	WASHER-HARD (13.5X22.5X3-MM THK)
60.	3K-0360	[1]	SEAL-O-RING
61.	2M-9780	[1]	SEAL-O-RING
62.	030-7946	[1]	ELBOW
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Technical Information Bulletin

Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Throttle Position Sensor
3508B Engine for Caterpillar Built Machines

Hardware and Schematics
Oil Renewal System for Off-Highway Trucks

Engine Speed Controlled by the Transmission ECM
3508B Engine for Caterpillar Built Machines

Controlled Throttle Shift/Direction Shift Management
3508B Engine for Caterpillar Built Machines

Decelerator Pedal
3508B Engine for Caterpillar Built Machines

Engine Oil Pressure
3508B Engine for Caterpillar Built Machines

Permanent Timing Calibration Sensor
3508B Engine for Caterpillar Built Machines

Atmospheric Pressure Sensor
3508B Engine for Caterpillar Built Machines

Engine Oil Pressure
3500B Engines

Hardware and Schematics
Oil Renewal System

Axle Protection
3508B Engine for Caterpillar Built Machines

Engine Oil Pressure
3508B Engine for Caterpillar Built Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System
3508B Engine for Caterpillar Built Machines

Troubleshooting

MID 036 - CID 0091 - FMI 08 Throttle Position signal abnormal
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0101 - FMI 03 Crankcase Pressure open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0101 - FMI 04 Crankcase Pressure short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0262 - FMI 04 5 Volt Sensor DC Power Supply short to ground
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0262 - FMI 03 5 Volt Sensor DC Power Supply short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0263 - FMI 03 Digital Sensor Supply short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0263 - FMI 04 Digital Sensor Supply short to ground
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0274 - FMI 04 Atmospheric Pressure short to ground
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0274 - FMI 13 Atmospheric Pressure calibration required
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0827 - FMI 08 Left Exhaust Temperature signal abnormal
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0261 - FMI 13 Engine Timing calibration required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0101 - FMI 13 Crankcase Pressure calibration required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0110 - FMI 04 Engine Coolant Temperature short to ground
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0168 - FMI 01 System Voltage Low
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0168 - FMI 02 System Voltage intermittent/erratic
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0274 - FMI 03 Atmospheric Pressure open/short to +batt
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0542 - FMI 13 Unfiltered Engine Oil Pressure cal required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0100 - FMI 13 Engine Oil Pressure calibration required
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0542 - FMI 02 Unfiltered Engine Oil Pressure misinstalled
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0190 - FMI 02 Loss of Engine Speed signal
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0190 - FMI 03 Engine Speed open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

MID 036 - CID 0190 - FMI 08 Engine Speed signal abnormal
3500B Engines for 5130B and 5230B Excavators

Engine Speed/Timing Sensor
3500B Engines for 5130B and 5230B Excavators

Analog Sensor - Calibrate
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

Analog Sensor Supply
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Digital Sensor Supply
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Electrical Connectors and Functions
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Engine Speed/Timing Sensor - Calibrate
3500B Engines for 5130B and 5230B Excavators

Throttle Position Sensor
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Engine Sensor Open/Short Test
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Electrical Connectors and Functions
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0091 - FMI 00 Throttle Switch not released
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0264 - FMI 08 Decel Throttle Position signal abnormal
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0277 - FMI 08 Timing Calibration signal abnormal
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0290 - FMI 03 Engine Fan Pump Pressure open/short to +batt
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0290 - FMI 04 Engine Fan Pump Pressure short to ground
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0861 - FMI 05 Service Engine Lamp open/short to +batt
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0861 - FMI 06 Service Engine Lamp short to ground
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0865 - FMI 05 Engine Exhaust Temp Lamp open/short to +batt
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0865 - FMI 06 Engine Exhaust Temp Lamp short to ground
3508B Engine for D11R Track-Type Tractors

Analog Sensor Supply
3508B Engine for D11R Track-Type Tractors

Decelerator Position Sensor
3508B Engine for D11R Track-Type Tractors

Digital Sensor Supply
3508B Engine for D11R Track-Type Tractors

Engine Speed/Timing Sensor - Calibrate
3508B Engine for D11R Track-Type Tractors

Engine Speed/Timing Sensor
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0091 - FMI 02 Incorrect Throttle Switch inputs
3508B Engine for D11R Track-Type Tractors

Electrical Connectors and Functions
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

Throttle Position Sensor
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

Engine Sensor Open/Short Test
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0542 - FMI 03 Unfiltered Engine Oil Pressure open/short to +batt
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks

Engine Sensor Open/Short Test
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0828 - FMI 08 Right Exhaust Temperature signal abnormal
3500B Engines for 5130B and 5230B Excavators

Analog Sensor Supply
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

Engine Speed/Timing Sensor
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

Permanent Timing Calibration Sensor
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders

MID 036 - CID 0091 - FMI 02 Incorrect Throttle Switch inputs
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0580 - FMI 03 Power Shift Pres Sensor open/short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0580 - FMI 04 Power Shift Pres Sensor short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0580 - FMI 08 Power Shift Pres Sensor signal is abnormal
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0581 - FMI 05 Power Shift Solenoid open circuit
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0581 - FMI 06 Power Shift Solenoid short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0581 - FMI 13 Power Shift Solenoid cal required
3500B Engines for 5130B and 5230B Excavators

Electrical Connectors and Functions
3500B Engines for 5130B and 5230B Excavators

Analog Sensor Supply
3500B Engines for 5130B and 5230B Excavators

Digital Sensor Supply
3500B Engines for 5130B and 5230B Excavators

Power Shift Solenoid Circuit - Test
3500B Engines for 5130B and 5230B Excavators

Power Shift Solenoid - Calibrate
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0290 - FMI 03 Engine Fan Pump Pressure open/short to +batt
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 0290 - FMI 04 Engine Fan Pump Pressure short to ground
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 1076 - FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3508B Engine for D11R Track-Type Tractors

MID 036 - CID 1076 - FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3508B Engine for D11R Track-Type Tractors

Engine Cooling Fan Bypass Solenoid
3508B Engine for D11R Track-Type Tractors

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

187-3096 WIRING GP-ENCLOSURE -LADDER SENSOR-LH S/N 4CS208-UP PART OF 187-2916 ENCLOSURE AR 5130B MINING EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

187-3096: WIRING GP-ENCLOSURE

Parts for your 5130B MINING EXCAVATOR:

190-5358: WIRING GP-ENCLOSURE

Parts for your 5130B MINING EXCAVATOR:

190-5358: WIRING GP-ENCLOSURE

Parts for your 5130B MINING EXCAVATOR:

135-3081: WIRING GP-ENGINE

Parts for your 5130B MINING EXCAVATOR:

135-3081: WIRING GP-ENGINE

Parts for your 5130B MINING EXCAVATOR:

135-3081: WIRING GP-ENGINE

Parts for your 5130B MINING EXCAVATOR:

135-3081: WIRING GP-ENGINE

Parts for your 5130B MINING EXCAVATOR:

135-3081: WIRING GP-ENGINE

Parts for your 5130B MINING EXCAVATOR:

135-3081: WIRING GP-ENGINE

Parts for your 5130B MINING EXCAVATOR:

135-3081: WIRING GP-ENGINE

Parts for your 5130B MINING EXCAVATOR:

Information:

Caterpillar Parts SIS Catalog 5130B :

Truck sale: