AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

149-1064 CYLINDER GP-BUCKET -LH S/N 4CS173-UP 220.0 MM BORE X 1715.0 STROKE PART OF 187-0790 COMMON AR-MASS EXCAVATOR AN ATTACHMENT 5130B


HYDRAULIC SYSTEM
CYLINDER GP

MINING EXCAVATOR 5130B MINING EXCAVATOR 4CS
 5130B Excavator 4CS00001-UP (MACHINE) POWERED BY 3508B Engine SEBP2672 5130B 4CS   (1996)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BUCKET
149-1063 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
149-1064 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
149-1064 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
6E-5752 CYLINDER GP-BUCKET
CYLINDER GP-STICK
103-6035 CYLINDER GP-STICK
CYLINDER GP-STICK
103-6035 CYLINDER GP-STICK
 

#SEBP26720660
 

149-1064: CYLINDER GP-BUCKET

149-1064 CYLINDER GP-BUCKET -LH
S/N 4CS173-UP
220.0 MM BORE X 1715.0 STROKE
PART OF 187-0790 COMMON AR-MASS EXCAVATOR
AN ATTACHMENT
i01466542 SEBP2672
1491064 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
3. 125-1059 [1] PISTON  
4. 135-6650 [1] CYLINDER AS  
  107-9629 [2] BUSHING  
5. 149-1065 [1] ROD AS  
  3E-9401 [2] RING-RETAINING  
  9U-9561 [1] BEARING (160-MM ID)  
6. 149-1069 [1] HEAD  
7. 108-0122 [1] RING-BACKUP  
8. 125-1204 [2] RING-WEAR  
9. 147-6585 [1] RING-WEAR  
10. 167-2233 C [1] SEAL AS  
11. 167-2352 C [1] SEAL-U-CUP  
12. 192-1425 C [1] SEAL AS  
13. 225-3296 C [1] SEAL-WIPER  
14. 8C-4893 [1] SEAL-HEAD (211.58-MM ID)  
15. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
16. 9M-5894 [1] SEAL-O-RING  
17. 9X-6018 [1] LOCKNUT (4-12-THD)  
18. 9X-6618 M [6] BOLT (M30X3.5X130-MM)  
19. 9X-8399 [8] WASHER (33X56X6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP26720661
 

6E-5752: CYLINDER GP-BUCKET

6E-5752 CYLINDER GP-BUCKET -FRONT SHOVEL
S/N 4CS1-UP
152.4MM (6IN) BORE X 450MM (17.72IN) STROKE
PART OF 106-4042 CYLINDER & MTG GP-BUCKET
AN ATTACHMENT
i00090592 SEBP2672
6E5752 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
2. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
3. 6V-3669 M [6] BOLT (M20X2.5X80-MM)  
4. 9T-0094 [1] RING-WEAR  
5. 167-2208 [1] SEAL AS-BUFFER  
6. 6E-5756 [1] HEAD  
7. 167-2319 [1] SEAL-U-CUP  
8. 225-3284 [1] SEAL-WIPER  
9. 155-2947 [1] ROD AS  
9A. 6E-5758 [2] BEARING  
10. 8T-8377 [1] SEAL-HEAD  
11. 8J-1717 [1] RING-BACKUP  
12. 6D-9157 [1] SEAL-O-RING  
13. 3G-2923 [1] PISTON  
14. 192-1441 [1] SEAL AS  
15. 7J-5326 [1] RING-WEAR  
16. 3J-6899 [1] LOCKNUT (2-1/4-12-THD)  
17. 141-9960 [1] CYLINDER AS  
  8T-9044 [2] RING-RETAINING  
  9U-9559 [1] BEARING  
18. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26720662
 

103-6035: CYLINDER GP-STICK

103-6035 CYLINDER GP-STICK -MASS EXCAVATOR
S/N 4CS1-153
254.0 MM (10.0 IN) BORE X 1780.0 MM (70.0 IN) STROKE
PART OF 135-4444 COMMON AR-MASS EXCAVATOR
AN ATTACHMENT
i00470751 SEBP2672
1036035 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-6038 [1] CYLINDER AS  
2. 107-9422 [2] BEARING  
3. 5P-2235 [1] SEAL-O-RING  
4. 1U-3307 [1] RING-BACKUP  
5. 136-8499 C [1] HEAD  
6. 124-5281 [1] ROD AS  
  095-0908 C [1] PIN-TAPERED  
7. 107-9422 [1] BEARING  
8. 3J-7354 [4] SEAL-O-RING  
9. 8T-1794 [1] SEAL AS  
10. 117-8865 [2] RING-WEAR  
11. 107-9467 M [6] BOLT (M36X4X150-MM)  
12. 3S-7023 [12] WASHER (34X57X6-MM THK)  
13. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
14. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
15. 9X-1802 C [1] RING-RETAINING  
16. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
17. 108-0134 [1] SEAL  
18. 136-7398 C [1] SEAL-U-CUP  
19. 136-7359 C [1] SEAL-BUFFER  
20. 6E-0173 [1] RING-WEAR  
21. 120-5815 [4] PISTON  
22. 9S-4182 [4] PLUG (7/16-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26720663
 

103-6035: CYLINDER GP-STICK

103-6035 CYLINDER GP-STICK -MASS EXCAVATOR
S/N 4CS154-184
254.0 MM (10.0 IN) BORE X 1780.0 MM (70.0 IN) STROKE
PART OF 135-4444, 187-0790 COMMON AR-MASS EXCAVATOR
AN ATTACHMENT
i00809039 SEBP2672
1036035 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-9858 [1] CYLINDER AS  
2. 107-9422 [2] BEARING  
3. 5P-2235 [1] SEAL-O-RING (240.66MM ID)  
4. 1U-3307 [1] RING-BACKUP  
5. 136-8499 [1] HEAD  
6. 157-8534 C [1] ROD AS  
9. 8T-1794 [1] SEAL AS  
10. 117-8865 [2] RING-WEAR  
11. 107-9467 CM [4] BOLT (M36X4X150-MM)  
12. 3S-7023 [12] WASHER (34X57X6-MM THK)  
13. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
14. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
15. 9X-1802 [1] RING-RETAINING  
16. 5M-6666 C [4] WASHER (38.5X55.3X5-MM THK)  
17. 108-0134 [1] SEAL  
18. 136-7398 [1] SEAL-U-CUP  
19. 136-7359 [1] SEAL-BUFFER  
20. 6E-0173 [1] RING-WEAR  
21. 157-8532 C [4] PISTON  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26720664
 

103-6035: CYLINDER GP-STICK

103-6035 CYLINDER GP-STICK -MASS EXCAVATOR
S/N 4CS185-196
254.0 MM (10.0 IN) BORE X 1780.0 MM (70.0 IN) STROKE
PART OF 187-0790 COMMON AR-MASS EXCAVATOR
AN ATTACHMENT
i01591674 SEBP2672
1036035 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-9858 [1] CYLINDER AS  
2. 107-9422 [2] BEARING  
3. 5P-2235 [1] SEAL-O-RING (240.66MM ID)  
4. 1U-3307 [1] RING-BACKUP  
5. 136-8499 [1] HEAD  
6. 157-8534 [1] ROD AS  
9. 172-3542 C [1] SEAL AS  
10. 117-8865 [2] RING-WEAR  
11. 107-9467 M [4] BOLT (M36X4X150-MM)  
12. 3S-7023 [12] WASHER (34X57X6-MM THK)  
13. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
14. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
16. 5M-6666 [4] WASHER (38.5X55.3X5-MM THK)  
17. 167-2501 C [1] SEAL-WIPER  
18. 167-2417 C [1] SEAL-U-CUP  
19. 167-2234 C [1] SEAL AS-BUFFER  
20. 6E-0173 [1] RING-WEAR  
21. 157-8532 [4] PISTON  
22. 166-7726 C [2] RING-BACKUP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26720665
 

112-2049: CYLINDER GP-STICK

112-2049 CYLINDER GP-STICK -FRONT SHOVEL
S/N 4CS1-184
190.5 MM (7.5 IN) BORE X 2200.0 MM (86.61 IN) STROKE
PART OF 135-4443, 187-0535 SHOVEL AR-FRONT
AN ATTACHMENT
i00091125 SEBP2672
1122049 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-2050 [1] CYLINDER AS  
  108-2990 [1] CAP AS  
  6E-5814 [2] BEARING  
2. 7J-9250 [1] LOCKNUT (3-1/4X12-THD)  
3. 125-3340 [1] PISTON  
4. 8T-7568 [1] SEAL-O-RING  
5. 158-3028 [1] RING-BACKUP  
6. 112-2052 [1] HEAD  
7. 106-4984 [1] ROD AS  
  095-0908 [1] PIN-TAPERED  
8. 9S-4182 [4] PLUG (7/16-20-THD)  
9. 3J-7354 [4] SEAL-O-RING  
10. 8T-1791 [1] SEAL AS  
11. 1U-2218 [1] RING-WEAR  
12. 9X-8480 M [8] BOLT (M24X3X110-MM)  
13. 5P-6604 [10] WASHER-HARD (25.4X40X5-MM THK)  
14. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
15. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
16. 9X-8915 M [2] BOLT-SOCKET HEAD (M24X3X130-MM)  
17. 161-5789 [1] SEAL-LIP TYPE  
18. [1] SEAL-U-CUP  
19. [1] SEAL-BUFFER  
20. 4T-9319 [1] RING-WEAR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26720666
 

112-2049: CYLINDER GP-STICK

112-2049 CYLINDER GP-STICK -FRONT SHOVEL
S/N 4CS185-UP
190.5 MM (7.5 IN) BORE X 2200.0 MM (86.61 IN) STROKE
PART OF 187-0535 SHOVEL AR-FRONT
AN ATTACHMENT
i01572210 SEBP2672
1122049 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-2050 [1] CYLINDER AS  
  108-2990 [1] CAP AS  
  6E-5814 [2] BEARING  
2. 7J-9250 [1] LOCKNUT (3-1/4X12-THD)  
3. 125-3340 [1] PISTON  
4. 8T-7568 [1] SEAL-O-RING  
5. 158-3028 [1] RING-BACKUP  
6. 112-2052 [1] HEAD  
7. 106-4984 [1] ROD AS  
  095-0908 [1] PIN-TAPERED  
8. 9S-4182 [4] PLUG (7/16-20-THD)  
9. 3J-7354 [4] SEAL-O-RING  
10. 192-1439 [1] SEAL AS  
11. 1U-2218 [2] RING-WEAR  
12. 9X-8480 M [8] BOLT (M24X3X110-MM)  
13. 5P-6604 [10] WASHER-HARD (25.4X40X5-MM THK)  
14. 9X-8915 M [2] BOLT-SOCKET HEAD (M24X3X130-MM)  
15. 167-2497 [1] SEAL-WIPER  
16. 167-2421 [1] SEAL-U-CUP  
17. 167-2228 [1] SEAL AS-BUFFER  
18. 4T-9319 [1] RING-WEAR  
19. 192-2051 [2] RING-BACKUP  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26720667
 

213-3531: CYLINDER GP-STICK

213-3531 CYLINDER GP-STICK
S/N 4CS197-UP
PART OF 187-0790 COMMON AR-MASS EXCAVATOR
Type 1
AN ATTACHMENT
i01734201 SEBP2672
2133531 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-9858 [1] CYLINDER AS  
2. 107-9467 M [4] BOLT (M36X4X150-MM)  
3. 5M-6666 [4] WASHER (38.5X55.3X5-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 172-3542 [1] SEAL AS  
6. 213-3532 [1] PISTON  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 136-8499 [1] HEAD  
10. 157-8534 [1] ROD AS  
  095-0908 [1] PIN-TAPERED  
11. 225-3297 [1] SEAL-WIPER  
12. 167-2417 [1] SEAL-U-CUP  
13. 167-2234 [1] SEAL AS-BUFFER  
14. 6E-0173 [1] RING-WEAR  
15. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
16. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
17. 3S-7023 [12] WASHER (34X57X6-MM THK)  
18. 166-7726 [2] RING-BACKUP  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26720668
 

213-3531: CYLINDER GP-STICK

213-3531 CYLINDER GP-STICK
S/N 4CS197-UP
PART OF 187-0790 COMMON AR-MASS EXCAVATOR
Type 2
AN ATTACHMENT
i02217199 SEBP2672
2133531 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-9858 [1] CYLINDER AS  
2. 107-9467 M [4] BOLT (M36X4X150-MM)  
3. 5M-6666 [4] WASHER (38.5X55.3X5-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 172-3542 [1] SEAL AS  
6. 213-3532 [1] PISTON  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 136-8499 [1] HEAD  
10. 157-8534 [1] ROD AS  
11. 225-3297 [1] SEAL-WIPER  
12. 167-2417 [1] SEAL-U-CUP  
13. 167-2234 [1] SEAL AS-BUFFER  
14. 6E-0173 [1] RING-WEAR  
15. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
16. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
17. 3S-7023 [12] WASHER (34X57X6-MM THK)  
18. 9F-2167 C [1] SCREW-PURGE (3/8-24X1.164-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26720669
 

127-1474: CYLINDER GP-TRACK TENSION

127-1474 CYLINDER GP-TRACK TENSION
S/N 4CS1-UP
177.8-MM (7-IN) BORE X 417-MM (16.4-IN) STROKE
PART OF 106-4069, 106-4072 IDLER GP-FRONT
Type 1
i00090424 SEBP2672
1271474 CYLINDER GP-TRACK TENSION Parts scheme
  For full view, you need register

Parts for your 5130B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-1697 [1] SEAL-LIP TYPE  
2. 121-1296 [1] HEAD  
3. 124-8364 [1] SEAL  
4. 127-1477 [1] CYLINDER AS  
5. 127-1478 [1] ROD  
6. 5P-6393 [1] RING-RETAINING  
7. 5P-8247 [12] WASHER-HARD (17X32X3.5-MM THK)  
8. 7J-8956 [1] SEAL-O-RING  
9. 8T-0281 M [12] BOLT (M16X2X80-MM)  
10. 9F-1399 [1] SEAL-O-RING  
11. 9J-0711 [1] RING-WEAR  
12. 9X-3613 [1] RING-WEAR  
13. 6V-5215 M [3] BOLT (M8X1.25X16-MM)  
  7S-6369 [3] WASHER (0.344X0.75X0.188-IN THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 5130B :

CYLINDER GP-BUCKET
149-1064 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
149-1063 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
149-1063 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
136-5044 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
136-5043 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
122-4967 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
122-4967 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
112-2053 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
6E-5752 CYLINDER GP-BUCKET
CYLINDER GP-STICK
103-6035 CYLINDER GP-STICK
CYLINDER GP-STICK
103-6035 CYLINDER GP-STICK
CYLINDER GP-STICK
103-6035 CYLINDER GP-STICK
CYLINDER GP-STICK
112-2049 CYLINDER GP-STICK
CYLINDER GP-STICK
112-2049 CYLINDER GP-STICK
CYLINDER GP-STICK
213-3531 CYLINDER GP-STICK
CYLINDER GP-STICK
213-3531 CYLINDER GP-STICK

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.