BASIC ENGINE
CYLINDER BLOCK GPHOUSING GP-FLYWHEEL
HOUSING GP-FRONT
CRANKSHAFT GP
CYLINDER BLOCK GP
BASIC ENGINE
CYLINDER BLOCK GP#SEBP26760670
132-9807: COVER GP-CYLINDER BLOCK
132-9807 COVER GP-CYLINDER BLOCK
FOR USE WITH @@@@@117-2786@@@@@, @@@@@117-2787@@@@@
CANNOT BE USED WITH @@@@@124-2668@@@@@
AN ATTACHMENT
FOR USE WITH @@@@@117-2786@@@@@, @@@@@117-2787@@@@@
CANNOT BE USED WITH @@@@@124-2668@@@@@
AN ATTACHMENT
#SEBP26760671
133-1209: COVER GP-FLYWHEEL HOUSING
133-1209 COVER GP-FLYWHEEL HOUSING
S/N 2PN1446-4806
RIGHT STARTER BORE
CANNOT BE USED WITH ELECTRIC STARTING MOTORS
S/N 2PN1446-4806
RIGHT STARTER BORE
CANNOT BE USED WITH ELECTRIC STARTING MOTORS
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26760672
113-8987: COVER GP-FRONT HOUSING
113-8987 COVER GP-FRONT HOUSING
POWER TAKE-OFF
POWER TAKE-OFF
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26760673
122-0761: COVER GP-FRONT HOUSING
122-0761 COVER GP-FRONT HOUSING
CANNOT BE USED WITH OIL FILLER
ALSO AN ATTACHMENT
CANNOT BE USED WITH OIL FILLER
ALSO AN ATTACHMENT
#SEBP26760674
117-2743: CRANKSHAFT GP
117-2743 CRANKSHAFT GP
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 116-1109 J | [3] | BEARING-MAIN | |
| 128-0382 AB | [1] | BEARING-MAIN (0.51-MM US) | ||
| 128-0383 AB | [1] | BEARING-MAIN (0.76-MM US) | ||
| 128-0384 AB | [1] | BEARING-MAIN (0.51-MM OS) | ||
| 128-0385 AB | [1] | BEARING-MAIN (0.51-MM OS, 0.51-MM US) | ||
| 2. | 116-1107 J | [2] | PLATE-THRUST | |
| 3. | 116-1108 J | [4] | BEARING-MAIN | |
| 128-0400 AB | [1] | BEARING-MAIN (0.51-MM US) | ||
| 128-0401 AB | [1] | BEARING-MAIN (0.76-MM US) | ||
| 128-0402 AB | [1] | BEARING-MAIN (0.51-MM OS) | ||
| 128-0403 AB | [1] | BEARING-MAIN (0.51-MM OS, 0.51-MM US) | ||
| 4. | 151-2920 | [1] | CRANKSHAFT AS | |
| 5. | 6V-3536 | [1] | DOWEL | |
| 6. | 160-8143 | [1] | GEAR-CRANKSHAFT (48-TEETH) | |
| 9Y-0810 F | [1] | SLEEVE-WEAR (REAR SEAL) | ||
| 9Y-0821 F | [1] | SLEEVE (FRONT SEAL) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 196-9521 J | BEARING GP-MAIN (CRANKSHAFT) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP26760675
128-0407: CYLINDER BLOCK AS
128-0407 CYLINDER BLOCK AS
PART OF 144-2958 CYLINDER BLOCK AS
PART OF 144-2958 CYLINDER BLOCK AS
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26760676
144-2958: CYLINDER BLOCK AS
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26760677
115-2982: CYLINDER BLOCK GP
115-2982 CYLINDER BLOCK GP
S/N 2PN1-1032
S/N 2PN1-1032
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3H-2388 | [6] | SEAL-O-RING | |
| 2. | 115-2980 | [6] | LINER-CYLINDER BLOCK | |
| 3. | 7N-5683 | [6] | DOWEL | |
| 4. | 104-3560 | [6] | SEAL-LINER | |
| 5. | 7E-4043 | [6] | JET AS-PISTON COOLING | |
| 6. | 8T-0100 M | [6] | BOLT (M8X1.25X60-MM) | |
| 7. | 3E-4352 | [6] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 8. | 6V-3538 | [2] | DOWEL | |
| 9. | 1N-5999 | [2] | PLUG-O-RING | |
| 10. | 5P-7813 | [2] | SEAL-O-RING | |
| 11. | 3P-1896 | [5] | PLUG-CUP | |
| 12. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
| 13. | 6V-5048 | [1] | SEAL-O-RING | |
| 14. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 15. | 3B-0623 | [3] | PLUG-CUP | |
| 16. | 104-3557 | [1] | CYLINDER BLOCK AS | |
| 17. | 5P-8247 | [14] | WASHER-HARD (17X32X3.5-MM THK) | |
| 18. | 8T-1483 M | [14] | BOLT (M16X2X160-MM) | |
| 19. | 126-0126 | [5] | BUSHING | |
| 20. | 126-0127 | [1] | BUSHING | |
| 21. | 130-0872 | [1] | BUSHING | |
| 22. | 104-3559 | [6] | SEAL-O-RING | |
| M | METRIC PART | |||
#SEBP26760678
115-2982: CYLINDER BLOCK GP
115-2982 CYLINDER BLOCK GP
S/N 2PN1033-1083
S/N 2PN1033-1083
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3H-2388 | [6] | SEAL-O-RING | |
| 2. | 126-0125 | [6] | LINER-CYLINDER BLOCK | |
| 3. | 7N-5683 | [6] | DOWEL | |
| 4. | 104-3560 | [6] | SEAL-LINER | |
| 5. | 7E-4043 | [6] | JET AS-PISTON COOLING | |
| 6. | 8T-0100 M | [6] | BOLT (M8X1.25X60-MM) | |
| 7. | 3E-4352 | [6] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 8. | 6V-3538 | [2] | DOWEL | |
| 9. | 1N-5999 | [2] | PLUG-O-RING | |
| 10. | 5P-7813 | [2] | SEAL-O-RING | |
| 11. | 4F-5695 | [6] | PLUG-CUP | |
| 12. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
| 13. | 6V-5048 | [1] | SEAL-O-RING | |
| 14. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 15. | 3B-0623 | [3] | PLUG-CUP | |
| 16. | 104-3557 | [1] | CYLINDER BLOCK AS | |
| 17. | 5P-8247 | [14] | WASHER-HARD (17X32X3.5-MM THK) | |
| 18. | 8T-1483 M | [14] | BOLT (M16X2X160-MM) | |
| 19. | 126-0126 | [5] | BUSHING | |
| 20. | 126-0127 | [1] | BUSHING | |
| 21. | 130-0872 | [1] | BUSHING | |
| M | METRIC PART | |||
#SEBP26760679
115-2982: CYLINDER BLOCK GP
115-2982 CYLINDER BLOCK GP
S/N 2PN1084-4806
S/N 2PN1084-4806
Parts for your C-10 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 144-2958 Y | [1] | CYLINDER BLOCK AS | |
| 2. | 7N-5683 | [6] | DOWEL | |
| 3. | 7E-4043 | [6] | JET AS-PISTON COOLING | |
| 4. | 8T-0100 M | [6] | BOLT (M8X1.25X60-MM) | |
| 5. | 3E-4352 | [6] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 6. | 6V-3538 | [2] | DOWEL | |
| 7. | 1N-5999 | [2] | PLUG-O-RING | |
| 8. | 5P-7813 | [2] | SEAL-O-RING | |
| 9. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
| 10. | 6V-5048 | [1] | SEAL-O-RING | |
| 11. | 3B-0623 | [3] | PLUG-CUP | |
| 12. | 4G-4972 | [6] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
CYLINDER BLOCK GP
Truck Engine News
A New Liner O-Ring Seal is Available for Certain C10 through C13 Truck Engines {1216, 7555}
2013/12/23
2013/12/23
Engine News
Special Instruction
Caterpillar has released a new Cylinder Head, a new Cylinder Block, a new Cylinder Head Gasket, and a new Bracket for the Camshaft Follower on the C-10 and C-12 Truck Engines{1101, 1124, 1201, 1209}
Caterpillar has released a new Cylinder Head, a new Cylinder Block, a new Cylinder Head Gasket, and a new Bracket for the Camshaft Follower on the C-10 and C-12 Truck Engines{1101, 1124, 1201, 1209}
Caterpillar has released a new Cylinder Head, a new Cylinder Block, a new Cylinder Head Gasket, and a new Bracket for the Camshaft Follower on the C-10 and C-12 Truck Engines{1101, 1124, 1201, 1209}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Possible Main Bearing Cap Interference On Above Engines Equipped With Rear Power Take Off
Possible Main Bearing Cap Interference On Above Engines Equipped With Rear Power Take Off
Possible Main Bearing Cap Interference On Above Engines Equipped With Rear Power Take Off
Specifications
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
Testing and Adjusting
Disassembly and Assembly