AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I-4212 PUMP GP-FUEL INJECTION S/N 6SR1-99999 3126 MARINE ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
SEPARATOR GP-WATER
LINES GP-FUEL
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

MARINE ENGINE 3126 MARINE ENGINE 6SR
 3126 Marine Engine 6SR00001-UP SEBP2685 3126 6SR   (1996)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
INJECTOR GP-FUEL
162-0218 INJECTOR GP-FUEL
PUMP GP-FUEL INJECTION
113-6171 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
113-6171 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
185-2303 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-4212 PUMP GP-FUEL INJECTION
 

#SEBP26850210
 

6I-4212: PUMP GP-FUEL INJECTION

6I-4212 PUMP GP-FUEL INJECTION
S/N 6SR1-99999
i00399017 SEBP2685
6I4212 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-5925 CM [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
2. 162-0212 C [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 9X-8267 C [1] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26850211
 

110-4394: PUMP GP-FUEL PRIMING

110-4394 PUMP GP-FUEL PRIMING
S/N 6SR1-99999
PART OF 120-3865 FILTER & LINES GP-PRIMARY FUEL, 119-2259 LINES GP-FUEL FILTER
AN ATTACHMENT
i00470616 SEBP2685
1104394 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-1532 [1] VALVE AS  
2. 104-7416 [1] KIT-VALVE (FUEL PRIMING)  
3. 3J-1907 [1] SEAL-O-RING  
4. 2P-2975 [1] SEAL-O-RING  
5. 110-4397 [1] PUMP AS  
 

#SEBP26850212
 

2W-4234: SEPARATOR GP-WATER

2W-4234 SEPARATOR GP-WATER
S/N 6SR1-99999
FOR USE WITH MARINE PROPULSION & MARINE AUXILIARY ENGINES
AN ATTACHMENT
i00359087 SEBP2685
2W4234 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4235 [1] BASE AS  
2. 8N-1590 [1] WASHER  
3. 8F-9206 [1] SEAL-O-RING  
4. 8N-1588 [1] BOLT-SEPARATOR  
5. 2W-4273 [1] VALVE AS-VENT (FUEL, WATER SEPARATOR)  
6. 8N-1589 [1] GASKET-SEPARATOR  
7. 2W-4236 [1] CASE AS  
8. 5B-7890 [1] PLUG-PIPE  
9. 8N-1586 [1] SPRING-SEPARATOR  
10. 4B-4281 [1] WASHER (16.8X33X2.5-MM THK)  
11. 8F-4610 [1] RING-RETAINING  
12. 8N-1587 [1] SUPPORT  
13. 8N-1585 [1] SEAL-SEPARATOR  
14. 8N-0205 [1] FILTER ELEMENT-FUEL (WATER SEPARATOR)  
 

#SEBP26850213
 

141-8288: VALVE GP-FUEL RELIEF

141-8288 VALVE GP-FUEL RELIEF
S/N 6SR1-99999
PART OF 120-3865 FILTER & LINES GP-PRIMARY FUEL, 117-5136, 119-2259, 119-2260 LINES GP-FUEL FILTER
AN ATTACHMENT
i00677334 SEBP2685
1418288 VALVE GP-FUEL RELIEF Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3294 [1] PLUNGER AS-VALVE  
2. 3K-0360 [1] SEAL-O-RING  
3. 6I-2424 [1] PLUG  
4. 141-8287 [1] SPRING  
 

#SEBP26850214
 

114-2707: ALTERNATOR GP-CHARGING

114-2707 ALTERNATOR GP-CHARGING
S/N 6SR1-99999
12 VOLT, 105 AMPERE
AN ATTACHMENT
i00484422 SEBP2685
1142707 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-6163 Y [1] ALTERNATOR GP-CHARGING  
2. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 7X-0338 [1] BOLT (1/2-13X6-IN)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 114-2705 [1] STRAP  
6. 8T-8917 [1] BOLT (1/2-13X1.25-IN)  
7. 9S-1240 [1] BRACKET AS  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
8. 114-2706 [1] PULLEY-ALTERNATOR  
9. 8L-8984 [1] V-BELT SET (ALTERNATOR AIR)(INCLUDES 2 BELTS)  
10. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
11. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26850215
 

115-6956: ALTERNATOR GP-CHARGING

115-6956 ALTERNATOR GP-CHARGING
S/N 6SR1-99999
24 VOLT, 60 AMP
AN ATTACHMENT
i00472243 SEBP2685
1156956 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-3986 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 60-AMPERE)  
2. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 7X-0338 [1] BOLT (1/2-13X6-IN)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 114-2705 [1] STRAP  
6. 8T-8917 [1] BOLT (1/2-13X1.25-IN)  
7. 9S-1240 [1] BRACKET AS  
  F [1] ANGLE  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
8. 114-2706 [1] PULLEY-ALTERNATOR  
9. 8L-8984 [1] V-BELT SET (ALTERNATOR AIR)(INCLUDES 2 BELTS)  
10. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
11. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26850216
 

116-4543: ALTERNATOR GP-CHARGING

116-4543 ALTERNATOR GP-CHARGING
S/N 6SR1-99999
12 VOLT, 51 AMPERE
AN ATTACHMENT
i00483652 SEBP2685
1164543 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-1396 Y [1] ALTERNATOR GP-CHARGING  
2. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-7673 M [1] BOLT (M12X1.75X50-MM)  
4. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 6F-1992 [1] V-BELT (ALTERNATOR)  
6. 0S-1618 [1] BOLT (5/16-18X1-IN)  
7. 9N-0869 [1] WASHER-HARD (8.8X25.5X2-MM THK)  
8. 8L-3523 [1] PULLEY-ALTERNATOR  
9. 117-5154 [1] STRAP  
10. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26850217
 

116-4544: ALTERNATOR GP-CHARGING

116-4544 ALTERNATOR GP-CHARGING
S/N 6SR1-99999
24 VOLT, 35 AMPERE
AN ATTACHMENT
i00973390 SEBP2685
1164544 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-1395 Y [1] ALTERNATOR GP-CHARGING  
2. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-7673 M [1] BOLT (M12X1.75X50-MM)  
4. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 6F-1992 [1] V-BELT (ALTERNATOR)  
6. 0S-1618 [1] BOLT (5/16-18X1-IN)  
7. 9N-0869 [1] WASHER-HARD (8.8X25.5X2-MM THK)  
8. 8L-3523 [1] PULLEY-ALTERNATOR  
9. 117-5154 [1] STRAP  
10. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26850218
 

4N-3986: ALTERNATOR GP-CHARGING

4N-3986 ALTERNATOR GP-CHARGING
S/N 6SR1-99999
24 VOLT, 60 AMPERE
PART OF 115-6956 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00370434 SEBP2685
4N3986 ALTERNATOR GP-CHARGING Parts scheme 4N3986 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-1876 [1] HOUSING AS  
2. 9S-2396 [1] BUSHING-TERMINAL  
3. 9N-0943 [1] PLUG-BEARING WELL  
4. 5P-3418 [1] BEARING-ROLLER  
5. 6N-1968 [1] STATOR AS  
  9S-2014 [3] CLIP  
  9N-0939 [1] GROMMET  
6. 9N-0942 [1] PLATE-COVER  
7. 2P-5616 [1] FRAME-DRIVE END  
8. 9S-2390 [1] RETAINER  
9. 9N-0937 [1] RECTIFIER AS  
10. 9S-2302 [1] ROTOR AS  
11. 5P-7807 [1] BALL BEARING  
12. 100-6531 [1] FAN-ALTERNATOR (11-BLADE)  
13. 5P-3419 [1] RACE-BEARING INNER  
14. 7F-7621 [1] WASHER (0.635X1.25X0.09-IN THK)  
15. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
16. 6N-1945 [1] COIL AS-FIELD  
17. 9X-2500 [4] SCREW-HEX FLANGE (10-24X38.1-MM)  
18. 9N-3388 [5] BOLT (10-24X0.75-IN)  
19. 100-6532 [1] COLLAR-ALTERNATOR  
20. 9S-2009 [4] BOLT-FLANGE HEAD (10-24X3.625-IN)  
21. 6N-1944 [1] DIODE AS  
22. 6N-1870 [2] SCREW AS (8-32X34-MM)  
  8M-6701 [3] WASHER (0.281X0.5X0.032-IN THK)(12.7MM .5IN OD)  
  6N-1856 [4] BUSHING-TERMINAL  
23. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
24. 9S-2544 [3] SCREW-HEX HEAD (8-32X11.13-MM)  
25. 9B-7233 [7] LOCKWASHER  
26. 4B-2043 [4] NUT (8-32-THD)  
27. 6V-8187 [2] NUT (1/4-28-THD)  
28. 1H-3244 [2] LOCKWASHER  
29. 6N-1925 [1] BRACKET  
30. 6N-1946 [1] CAPACITOR AS  
31. 6N-1872 [3] SCREW AS (8-32X1.25-IN)  
32. 3T-6354 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
33. 6N-1873 [1] LEAD AS  
34. 2L-8075 [3] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
35. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
36. 6N-1871 [1] LEAD AS  
37. 030-9612 [4] SCREW-FORMING (10-24X0.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  6N-1875 [1] KIT-OUTPUT TERMINAL (ALTERNATOR)  
    (INCLUDES TERMINAL, LOAD, BUSHING, WASHERS, NUTS & LOCKWASHERS)
  105-3762 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES TERMINAL, INSULATOR, BUSHING, WASHER, NUTS & LOCKWASHERS)
 

#SEBP26850219
 

6T-1395: ALTERNATOR GP-CHARGING

6T-1395 ALTERNATOR GP-CHARGING
24 VOLT, 35 AMPERE
PART OF 116-4544 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00401882 SEBP2685
6T1395 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-4117 [1] CAPACITOR  
2. 7T-0677 [1] DIODE AS-NEGATIVE (3 DIODE)  
3. 7T-0676 [1] DIODE AS-POSITIVE (3 DIODE)  
4. 6T-9445 [1] REGULATOR-VOLTAGE  
5. 6T-9446 [1] HOUSING-REAR  
6. 9G-5208 [1] RETAINER-REAR BEARING  
7. 6T-2032 [1] GASKET-COVER  
8. 6T-2031 [1] BRUSH AS  
9. 6T-4116 [1] GASKET  
10. 6T-4100 [1] PLATE-ADAPTER  
11. 6T-9443 [1] STATOR AS  
12. 3N-1202 [1] ROTOR AS  
13. 5P-6836 [1] BEARING (DOUBLE SHIELD)  
14. 3K-6168 [1] BOLT-SOCKET HEAD (10-32X0.625-IN)  
  7H-2079 [1] LOCKWASHER  
  3N-1223 [1] WASHER (0.196X0.312X0.067-IN THK)  
15. 3N-1200 [1] RING AS-SLIP  
16. 8L-9655 [1] HOUSING-FRONT  
17. 6T-2027 [1] RETAINER-BEARING  
18. 1N-9087 [1] SPACER (0.628X1.35X0.33-MM THK)  
19. 8L-9654 [4] SLEEVE-SHAFT  
20. 1B-8704 [1] KEY-WOODRUFF  
21. 1S-7056 [1] BALL BEARING  
22. 8L-9661 [1] FAN-ALTERNATOR (14-BLADE)  
23. 7T-0895 [2] CAP  
24. 4B-2046 C [3] NUT (10-24-THD)  
25. 6V-8185 C [1] NUT (1/4-20-THD)  
26. 2K-4821 C [1] LOCKNUT (5/8-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  7X-1028 C [1] KIT-TERMINAL  
    (INCLUDES INSULATORS, NUTS, WASHERS,
    LOCKWASHERS, & SCREWS)
  7X-1029 C [1] KIT-HARDWARE  
    (INCLUDES BOLTS, LOCKWASHERS, WASHERS,
    NUTS, SCREWS, & STRAPS)
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/23
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/04/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Use 170-9227 Reamer Shims To Aid In Reaming 3100 Engine Injector Sleeves {1250}
1999/03/01
New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/09/01
High Efficiency Orifice (HEO) Fuel Injectors Are Now Used For Service Repairs {1290}
2000/07/01
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1000, 1254}
2006/01/02
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/19
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23
Operation and Maintenance Manual
Fuel Injection Timing - Check
3116 and 3126 Marine Engines
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
Unit Injector Hold Down Bolts
Unit Injector Hold Down Bolts
Specifications
Unit Injector
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector Mechanism
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Information Release Memo
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Unit Injector - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Fuel Timing Dimension - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector Synchronization - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Unit Injector Cranking Rack Position
3114, 3116 and 3126 Engines
Unit Injector Misfire
3114, 3116 and 3126 Engines
Unit Injector
3114, 3116 and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116 and 3126 Engines
Unit Injector - Install
3114, 3116 and 3126 Engines
Service Magazine
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3126 :

PUMP GP-FUEL INJECTION
185-2303 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
113-6171 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
113-6171 PUMP GP-FUEL INJECTION
PLUG GP-FUEL FILTER LINES
121-2118 PLUG GP-FUEL FILTER LINES
PLUG GP-FUEL FILTER LINES
121-2117 PLUG GP-FUEL FILTER LINES
LINES GP-GOVERNOR OIL
119-1705 LINES GP-GOVERNOR OIL
LINES GP-FUEL RATIO CONTROL
120-0209 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL FILTER
119-2260 LINES GP-FUEL FILTER
PUMP GP-FUEL PRIMING
110-4394 PUMP GP-FUEL PRIMING
SEPARATOR GP-WATER
2W-4234 SEPARATOR GP-WATER
VALVE GP-FUEL RELIEF
141-8288 VALVE GP-FUEL RELIEF
ALTERNATOR GP-CHARGING
114-2707 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
115-6956 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
116-4543 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
116-4544 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
4N-3986 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar B312-60DC, schaufel, Bau-Und Bergbauausrüstung
 
Caterpillar B312-60DC, schaufel, Bau-Und Bergbauausrüstung
- bucket
FABICK CAT
Caterpillar 3126B, Construction
On Request 
Caterpillar 3126B, Construction
- Industrial engines
ZEPPELIN POWER SYSTEMS GMBH & CO. KG
Germany
CATERPILLAR 3126 1995
 
CATERPILLAR 3126 1995
- MARINE - PROPULSION
BARLOWORLD STET
1999 CAT 3126
USD $14,000 
1999 CAT 3126

Milton CAT Power Systems
Milford, Massachusetts
1999 CAT 3126
USD $11,000 
1999 CAT 3126

Milton CAT Power Systems
Milford, Massachusetts
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.