143-7219 CYLINDER GP-TILT S/N 8KP1-UP; 8XP1-UP; 4TS1-UP 88.9-MM(3.5-IN)BORE X 152.4-MM(6-IN)STROKE PART OF 142-5878 BULLDOZER AR-ANGLING, 139-7727 BULLDOZER AR-PWR ANGLE & TILT Type 2 AN ATTACHMENT D3C III

HYDRAULIC SYSTEM

CYLINDER GP

0. 143-7219 CYLINDER G
1. 9J-8674 CYLINDER G

HYDRAULIC GP

2. 115-1074 HYDRAULIC
3. 8Y-7126 HYDRAULIC

LINES GP-CYLINDER

4. 139-4622 LINES GP-A
5. 139-7729 LINES GP-A

LINES GP-HYDRAULIC

6. 115-1079 LINES GP-H

LINES GP-PILOT

7. 115-1072 LINES GP-P
8. 156-1935 LINES GP-P
9. 164-6425 LINES GP-P
0. INFORMATION

TRACK-TYPE TRACTOR D3C III TRACK-TYPE TRACTOR 4KS
D3C & D3C LGP, XL Series III Hystat Tractors 4KS00001-UP (MACHINE) POWERED BY 3046 Engine SEBP2686 D3C III 4KS (1997)

HYDRAULIC SYSTEM

CYLINDER GP

136-3156 CYLINDER GP-ANGLING

139-0548 CYLINDER GP-ANGLING

169-9527 CYLINDER GP-ANGLING

141-2915 CYLINDER GP-BULLDOZER LIFT

7J-9223 CYLINDER GP-BULLDOZER LIFT

7J-9920 CYLINDER GP-RIPPER

143-7219 CYLINDER GP-TILT

9J-8674 CYLINDER GP-TILT

#SEBP26860270

143-7219: CYLINDER GP-TILT

CYLINDER GP-TILT

143-7219 CYLINDER GP-TILT
S/N 8KP1-UP; 8XP1-UP; 4TS1-UP
88.9-MM(3.5-IN)BORE X 152.4-MM(6-IN)STROKE
PART OF 142-5878 BULLDOZER AR-ANGLING, 139-7727 BULLDOZER AR-PWR ANGLE & TILT
Type 2
AN ATTACHMENT

i01731023 SEBP2686

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	143-7220	[1]	CYLINDER AS
1A.	4D-0298	[1]	BEARING
2.	4T-8054	[1]	SEAL AS
3.	7J-9886	[1]	PISTON
4.	167-2186	[1]	SEAL AS-BUFFER
5.	167-2294	[1]	SEAL-U-CUP
6.	167-2450	[1]	SEAL-WIPER
7.	8J-0090	[1]	ROD AS-PISTON
7A.	4D-0298	[1]	BEARING
8.	7J-9887	[1]	CROWN
9.	4T-6780	[1]	RING-WEAR
10.	2H-3931	[1]	SEAL-O-RING
11.	4J-9224	[1]	RING-BACKUP
12.	9T-7346	[1]	HEAD
13.	7J-9885	[1]	RING-WEAR
14.	8J-7415	[1]	WASHER-HARD (28X51X4.5-MM THK)
15.	7J-5639	[1]	BOLT-LOCKING (1-14X2.5-IN)
16.	3B-8486	[1]	FITTING-GREASE (1/8-27 PTF)
17.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP26860271

9J-8674: CYLINDER GP-TILT

CYLINDER GP-TILT

9J-8674 CYLINDER GP-TILT
S/N 5WH1-UP; 6EH1-UP
88.9-MM (3.5-IN) BORE X 152.4-MM (6-IN) STROKE
PART OF 117-4575, 117-4576 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i00197178 SEBP2686

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7J-5639	[1]	BOLT-LOCKING (1-14X2.5-IN)
2.	7J-9885	[1]	RING-WEAR
3.	7J-9886	[1]	PISTON
4.	4T-8054	[1]	SEAL AS
5.	9J-9294	[1]	CYLINDER AS
6.	3Y-2768	[2]	RING
7.	4D-0298	[1]	BEARING
8.	5B-8855	[1]	PLATE-SCREW
9.	9J-0398	[2]	BOSS
10.	5J-8150	[1]	SEAL-U-CUP
11.	8C-9131	[1]	SEAL-LIP TYPE
12.	8J-0090	[1]	ROD AS-PISTON
13.	3Y-2768	[2]	RING
14.	4D-0298	[1]	BEARING
15.	7J-9887	[1]	CROWN
16.	9T-7346	[1]	HEAD
17.	4J-9224	[1]	RING-BACKUP
18.	2H-3931	[1]	SEAL-O-RING
19.	8J-7415	[1]	WASHER-HARD (28X51X4.5-MM THK)
20.	4T-6780	[1]	RING-WEAR
21.	3B-8486	[1]	FITTING-GREASE (1/8-27 PTF)
22.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
23.	006-8663	[1]	RING
24.	8C-9122	[1]	SEAL AS
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP26860272

115-1074: HYDRAULIC AR

HYDRAULIC AR

115-1074 HYDRAULIC AR
S/N 4KS1-UP; 4TS1-UP; 5GS1-UP
PART OF 115-1088, 115-1089, 137-7460 GENERAL AR

i00489889 SEBP2686

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
117-7714 Y	[1]	CONTROL GP-HYDRAULIC HAND
115-1079 Y	[1]	LINES GP-HYDRAULIC
115-1081 Y	[1]	LINES GP-PUMP
137-0300 Y	[1]	PUMP GP-GEAR
112-2908 Y	[1]	TANK GP-HYDRAULIC
115-1084 Y	[1]	VALVE & MTG GP-CONTROL
Y		SEPARATE ILLUSTRATION

#SEBP26860273

8Y-7126: HYDRAULIC AR

HYDRAULIC AR

8Y-7126 HYDRAULIC AR
S/N 4KS1-UP; 4TS1-UP; 5GS1-UP
FOR USE WITH OPEN ROPS, PAT BLADE AND RIPPER
CANNOT BE USED WITH T667,T668,T670,T671,T672,T673: CANNOT BE USED WITH 2 LEVER BULLDOZER CONTROL
AN ATTACHMENT

i00197176 SEBP2686

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8Y-7111 Y	[1]	CONTROL GP-HYDRAULIC HAND
8Y-0246 Y	[1]	LINES GP-REAR ATTACHMENT
9T-7250 Y	[1]	VALVE GP-BANK 4
Y		SEPARATE ILLUSTRATION

#SEBP26860274

139-4622: LINES GP-ANGLE & TILT

LINES GP-ANGLE & TILT

139-4622 LINES GP-ANGLE & TILT
S/N 5WH1-UP; 6EH1-UP
PART OF 117-4575, 117-4576 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i00496196 SEBP2686

1394622 LINES GP-ANGLE & TILT Parts scheme

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
2.	5G-0682 I	[4]	HOSE AS
3.	6I-8065 I	[2]	HOSE AS
4.	005-4362	[4]	ELBOW
5.	3K-0360	[6]	SEAL-O-RING
6.	7X-0326	[4]	BOLT (1/2-13X3-IN)
7.	6S-8021	[2]	GUARD AS
			(EACH INCLUDES)
	3S-3158	[2]	PIPE
8.	7B-1598	[2]	CLIP
9.	8E-7337	[1]	TUBE AS
10.	6S-8040 I	[2]	HOSE AS
11.	6S-4728	[2]	TUBE AS
12.	2V-0156 I	[2]	HOSE AS
13.	2P-1279	[1]	LOCKNUT (9/16-18-THD)
14.	6S-9052	[1]	GUARD
15.	030-8188	[2]	CONNECTOR
16.	8T-2501	[4]	BOLT (3/8-16X2-IN)
17.	6S-9054	[1]	TUBE AS
18.	5M-3062	[7]	BOLT (3/8-16X0.75-IN)
19.	5P-1075	[17]	WASHER-HARD (10.2X22.5X3-MM THK)
20.	139-4623	[1]	TUBE AS
21.	5P-8167	[2]	BOLT (3/8-16X0.625-IN)
22.	8E-9992	[1]	GUARD AS
23.	139-4624	[1]	TUBE AS
24.	5S-7379	[2]	BOLT (3/8-16X0.875-IN)
25.	4L-6454	[4]	BOLT (3/8-16X1-IN)
26.	6S-6477	[1]	GUARD
27.	1P-1441	[6]	NUT-FLARED (3/4-16-THD)
28.	8E-9998	[1]	GUARD AS
29.	8E-7559	[1]	GUARD AS
	1F-0750	[2]	NUT-WELD (3/8-16-THD)
30.	8E-5550	[2]	CLIP
31.	7X-0608	[2]	WASHER-HARD (10.2X16X2-MM THK)
32.	6S-8236	[2]	PLATE
33.	030-8144	[6]	REDUCER-FLARED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP26860275

139-7729: LINES GP-ANGLE & TILT

LINES GP-ANGLE & TILT

139-7729 LINES GP-ANGLE & TILT
S/N 8KP1-UP; 8XP1-UP
PART OF 142-5878 BULLDOZER AR-ANGLING, 139-7727 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i00496735 SEBP2686

1397729 LINES GP-ANGLE & TILT Parts scheme

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6S-6477	[1]	GUARD
2.	6S-8236	[2]	PLATE
3.	6S-9052	[1]	GUARD
4.	8T-1885	[2]	CLIP (SLOT)
5.	8T-1886	[2]	CLIP (TAB)
6.	140-5918	[1]	TUBE AS
7.	140-6324	[2]	TUBE AS
8.	141-7922	[1]	COVER AS
9.	141-9927	[2]	CLIP
10.	142-0114 I	[2]	HOSE AS
11.	142-0420	[1]	TUBE AS
12.	142-0443 I	[2]	HOSE AS
13.	143-4706 I	[4]	HOSE AS
14.	143-5038	[1]	TUBE AS
15.	143-5252	[1]	TUBE AS
16.	143-5367	[1]	TUBE AS
17.	143-5370	[1]	TUBE AS
18.	143-7291	[1]	COVER AS
	9F-2978	[1]	NUT-WELD (3/8-16-THD)
	8R-5144	[2]	WASHER (12X30X9-MM THK)
19.	143-7715	[1]	COVER AS
	9F-2978	[1]	NUT-WELD (3/8-16-THD)
	8R-5144	[2]	WASHER (12X30X9-MM THK)
20.	143-7781	[1]	COVER AS
21.	143-7836	[1]	COVER AS
22.	144-1232 I	[2]	HOSE AS
23.	144-5739 I	[2]	HOSE AS
24.	145-3348	[2]	GUARD AS
25.	145-9098	[1]	TUBE AS
26.	145-9143	[1]	TUBE AS
27.	3K-0360	[6]	SEAL-O-RING
28.	4L-6454	[2]	BOLT (3/8-16X1-IN)
29.	5M-3062	[2]	BOLT (3/8-16X0.75-IN)
30.	5P-1075	[20]	WASHER-HARD (10.2X22.5X3-MM THK)
31.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
32.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
33.	6V-8397	[24]	SEAL-O-RING
34.	6V-8398	[14]	SEAL-O-RING
35.	6V-8634	[2]	CONNECTOR
36.	6V-8723	[4]	ELBOW
37.	6V-8936	[8]	REDUCER
38.	6V-8994	[1]	UNION (STRAIGHT)
39.	6V-8995	[3]	UNION (STRAIGHT)
40.	6V-9168	[1]	NUT (11/16-16-THD)
41.	6V-9169	[3]	NUT (13/16-16-THD)
42.	6V-9836	[2]	TEE-SWIVEL
43.	7X-0326	[4]	BOLT (1/2-13X3-IN)
44.	8T-2501	[4]	BOLT (3/8-16X2-IN)
45.	9B-7237	[4]	BOLT (3/8-16X1.25-IN)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP26860276

115-1079: LINES GP-HYDRAULIC

LINES GP-HYDRAULIC

115-1079 LINES GP-HYDRAULIC
S/N 4KS1-UP; 4TS1-UP; 5GS1-UP
PART OF 115-1074 HYDRAULIC AR

i00557660 SEBP2686

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
2.	2M-9780	[6]	SEAL-O-RING
3.	6V-8398	[27]	SEAL-O-RING
4.	117-9963	[1]	TUBE AS
5.	117-9953	[4]	TUBE AS
6.	8T-6876	[4]	ELBOW
7.	3J-1907	[8]	SEAL-O-RING
8.	6V-8642	[2]	CONNECTOR
9.	7J-9108	[4]	SEAL-O-RING
10.	117-9955	[1]	TUBE AS
11.	6V-9272	[2]	TEE-UNION
12.	120-6445 I	[2]	HOSE AS
13.	120-6446 I	[2]	HOSE AS
14.	1H-5948	[2]	CLAMP-TUBE
15.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
16.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
18.	117-9959	[1]	TUBE AS
19.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
20.	117-9956	[1]	TUBE AS
21.	117-9958	[1]	TUBE AS
22.	6V-8638	[4]	CONNECTOR
23.	117-9961	[1]	TUBE AS
24.	117-9962	[1]	TUBE AS
25.	117-9954	[1]	TUBE AS
26.	117-9951	[1]	TUBE AS
27.	117-9952	[1]	TUBE AS
28.	8T-1885	[8]	CLIP (SLOT)
29.	8T-1886	[8]	CLIP (TAB)
30.	8T-4133 M	[1]	NUT (M10X1.5-THD)
31.	6S-4709	[2]	BLOCK AS
32.	7X-2549 M	[4]	BOLT (M12X1.75X100-MM)
33.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
34.	6V-8636	[4]	CONNECTOR
35.	6V-9851	[3]	ELBOW
36.	9X-8250	[2]	CLIP
37.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
38.	5M-3062	[2]	BOLT (3/8-16X0.75-IN)
39.	138-2920	[1]	PLATE
40.	8T-4136 LM	[1]	BOLT (M10X1.5X25-MM)
41.	8T-4121 L	[1]	WASHER-HARD (11X21X2.5-MM THK)
42.	6V-8639	[4]	CONNECTOR
43.	3K-0360	[4]	SEAL-O-RING
44.	6V-8397	[4]	SEAL-O-RING
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	L		USE WITH CAB ONLY
	M		METRIC PART

#SEBP26860277

115-1072: LINES GP-PILOT

LINES GP-PILOT

115-1072 LINES GP-PILOT
S/N 4KS1-UP; 4TS1-UP; 5GS1-UP
PART OF 113-8301, 113-8302, 137-7465 POWER TRAIN AR

i00557659 SEBP2686

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	108-7793 Y	[1]	VALVE GP-PILOT
2.	6V-9200	[4]	ELBOW
3.	117-6099 I	[1]	HOSE AS
4.	6U-0455	[2]	STRAP
5.	117-6100	[1]	TUBE AS
6.	117-6103 I	[1]	HOSE AS
7.	117-6104 I	[1]	HOSE AS
8.	117-6105 I	[1]	HOSE AS
9.	117-6106 I	[1]	HOSE AS
10.	6V-8636	[6]	CONNECTOR
11.	6V-8397	[18]	SEAL-O-RING
12.	3J-1907	[13]	SEAL-O-RING
13.	146-1633	[1]	TUBE AS
14.	3J-7354	[4]	SEAL-O-RING
15.	112-9441 I	[1]	HOSE AS
16.	7X-2459	[1]	ADAPTER-TEE
17.	6V-0852	[1]	CAP-DUST
18.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
19.	6V-8724	[2]	ELBOW
20.	6V-9850	[1]	ELBOW
21.	146-2690	[1]	BRACKET AS
	8T-3612 M	[2]	NUT-WELD (M8X1.25-THD)
22.	117-6089	[1]	PLATE
23.	8T-4136 M	[9]	BOLT (M10X1.5X25-MM)
24.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-0269 M	[4]	BOLT-SOCKET HEAD (M6X1X20-MM)
26.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
27.	7X-7729	[6]	WASHER (11X25X3-MM THK)
28.	8T-8902	[2]	ADAPTER-TEE
29.	9S-4191	[2]	PLUG (9/16-18-THD)
30.	8T-4133 M	[4]	NUT (M10X1.5-THD)
31.	125-2757	[1]	FILM-INSTRUCTION (SPEED)
32.	146-2694	[1]	LEVER AS
	9R-2821 M	[2]	BOSS (M10X1.5X15-MM)
33.	2M-8908	[1]	KNOB
34.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
35.	8T-6431	[1]	ROD END
36.	4M-1768	[1]	SPRING-DETENT
37.	6V-8781	[1]	TEE
38.	146-2702	[1]	BRACKET AS
	6D-3787	[1]	BEARING-ROLLER
	7T-1099	[1]	LINK
39.	7X-0594	[2]	WASHER-HARD (20X38X3-MM THK)
40.	2J-6356	[1]	RING-RETAINING
41.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
42.	7X-0818 M	[2]	BOLT (M8X1.25X45-MM)
43.	3T-1078 Y	[1]	VALVE GP-BRAKE
44.	8E-4525	[1]	BOOT
45.	6G-6396	[1]	WASHER
46.	6V-9197	[1]	LOCK PIN
47.	1B-0676	[1]	PIN
48.	6Y-2851	[1]	ROD-EYE
49.	6V-8801	[1]	NUT (3/8-16-THD)
50.	8T-5063	[1]	ROD END
51.	117-6095	[1]	ROD
52.	9X-4157	[1]	SWITCH AS-NEUTRAL START
	6V-8376	[4]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[4]	LOCKWASHER
53.	2Y-5829 M	[1]	NUT (M10X1.5-THD)
54.	135-9495	[1]	ROD
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP26860278

156-1935: LINES GP-PILOT

LINES GP-PILOT

156-1935 LINES GP-PILOT
S/N 4KS1-UP; 4TS1-UP; 5GS1-UP
PART OF 113-8301, 113-8302, 137-7465 POWER TRAIN AR

i00880141 SEBP2686

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	156-2600 Y	[1]	VALVE GP-PILOT
2.	6V-9200	[4]	ELBOW
3.	117-6099 I	[1]	HOSE AS
4.	6U-0455	[2]	STRAP
5.	117-6100	[1]	TUBE AS
6.	117-6103 I	[1]	HOSE AS
7.	117-6104 I	[1]	HOSE AS
8.	117-6105 I	[1]	HOSE AS
9.	117-6106 I	[1]	HOSE AS
10.	6V-8636	[6]	CONNECTOR
11.	6V-8397	[18]	SEAL-O-RING
12.	3J-1907	[13]	SEAL-O-RING
13.	153-2379	[1]	TUBE AS
14.	3J-7354	[4]	SEAL-O-RING
15.	146-1633	[1]	TUBE AS
16.	7X-2459	[1]	ADAPTER-TEE
17.	6V-0852	[1]	CAP-DUST
18.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
19.	6V-8724	[2]	ELBOW
20.	6V-9850	[1]	ELBOW
21.	146-2702	[1]	BRACKET AS
	6D-3787	[1]	BEARING-ROLLER
	7T-1099	[1]	LINK
22.	117-6089	[1]	PLATE
23.	8T-4136 M	[9]	BOLT (M10X1.5X25-MM)
24.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-0269 M	[4]	BOLT-SOCKET HEAD (M6X1X20-MM)
26.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
27.	7X-7729	[6]	WASHER (11X25X3-MM THK)
28.	146-2690	[1]	BRACKET AS
	8T-3612 M	[2]	NUT-WELD (M8X1.25-THD)
29.	8T-4133 M	[4]	NUT (M10X1.5-THD)
30.	146-2694	[1]	LEVER AS
	9R-2821 M	[2]	BOSS (M10X1.5X15-MM)
31.	2M-8908	[1]	KNOB
32.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
33.	8T-6431	[1]	ROD END
34.	4M-1768	[1]	SPRING-DETENT
35.	6V-8781	[1]	TEE
36.	7X-0594	[2]	WASHER-HARD (20X38X3-MM THK)
37.	2J-6356	[1]	RING-RETAINING
38.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
39.	7X-0818 M	[2]	BOLT (M8X1.25X45-MM)
40.	3T-1078 Y	[1]	VALVE GP-BRAKE
41.	8E-4525	[1]	BOOT
42.	6G-6396	[1]	WASHER
43.	6V-9197	[1]	LOCK PIN
44.	1B-0676	[1]	PIN
45.	6Y-2851	[1]	ROD-EYE
46.	6V-8801	[1]	NUT (3/8-16-THD)
47.	8T-5063	[1]	ROD END
48.	117-6095	[1]	ROD
49.	9X-4157	[1]	SWITCH AS-NEUTRAL START
	6V-8376	[4]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[4]	LOCKWASHER
50.	2Y-5829 M	[1]	NUT (M10X1.5-THD)
51.	135-9495	[1]	ROD
52.	9S-4191	[2]	PLUG (9/16-18-THD)
53.	125-2757	[1]	FILM-INSTRUCTION (SPEED)
54.	8T-8902	[2]	ADAPTER-TEE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP26860279

164-6425: LINES GP-PILOT

LINES GP-PILOT

164-6425 LINES GP-PILOT
S/N 4KS1-UP; 4TS1-UP; 5GS1-UP
PART OF 113-8301, 113-8302, 137-7465 POWER TRAIN AR

i01065595 SEBP2686

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-7819	[1]	RING-RETAINING
2.	2M-8908	[1]	KNOB
3.	3S-2093	[1]	STRAP-CABLE
4.	4L-7049	[1]	NUT (9/16-18-THD)
5.	4M-1768	[1]	SPRING-DETENT
6.	6K-0806	[1]	STRAP-CABLE
7.	6U-0455	[2]	STRAP
8.	6V-0852	[1]	CAP-DUST
9.	7S-5757	[1]	RING-RETAINING
10.	8C-3111	[2]	ROD END
11.	9X-4157	[1]	SWITCH AS-NEUTRAL START
	6V-8376	[4]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[4]	LOCKWASHER
12.	009-8670	[6]	WASHER (SPRING)
13.	117-6103 I	[1]	HOSE AS
14.	117-6104 I	[1]	HOSE AS
15.	117-6105 I	[1]	HOSE AS
16.	117-6106 I	[1]	HOSE AS
17.	125-2757	[1]	FILM-INSTRUCTION (SPEED)
18.	135-9495	[1]	ROD
19.	146-1633	[1]	TUBE AS
20.	161-0023	[1]	BRACKET AS
	6D-3787	[1]	BEARING-ROLLER
	7T-1099	[1]	LINK
21.	161-0532	[1]	PLATE
22.	161-0747	[1]	PLATE AS
23.	161-3986	[1]	LEVER AS
	9S-6465	[1]	BEARING-ROLLER
24.	161-4419	[1]	LEVER AS
25.	161-5659	[1]	LEVER AS
	8T-1177	[1]	BEARING-ROLLER
26.	161-6181	[1]	YOKE AS
27.		[2]	LEVER
28.		[1]	ROD
29.	161-6629	[1]	PIN
30.	163-3902	[1]	BRACKET AS
31.	163-3906	[1]	SHAFT
32.	163-3908	[1]	CLEVIS
33.	163-3910	[1]	ROD
34.	163-4579	[2]	SPACER (11-MM THK)
35.	163-5503	[1]	COLLAR
36.	163-5504	[2]	DISC
37.	163-7799	[1]	TUBE AS
38.	164-3879	[1]	PLATE
39.	164-3880	[1]	SEAL (9.6-MM ID)
40.	164-3942	[2]	SPACER (6-MM THK)
41.	164-9438 Y	[1]	VALVE GP-PILOT
42.	165-8409	[1]	ROD END
43.	166-0643	[1]	FILM-INSTRUCTION (SPEED HOLD CONTROL)
44.	166-2334	[1]	BOOT-DUST
45.	169-2502	[1]	LINK AS
46.	174-3663	[1]	BRACKET AS
47.	174-4189 I	[1]	HOSE AS
48.	217-3871	[1]	BOLT
49.	175-0107	[1]	TUBE AS
50.	1B-8702	[1]	KEY-WOODRUFF
51.	2J-6356	[2]	RING-RETAINING
52.	2Y-5829 M	[1]	NUT (M10X1.5-THD)
53.	3B-4607	[1]	PIN-COTTER
54.	3J-1907	[9]	SEAL-O-RING
55.	4B-2913	[1]	PIN-CLEVIS
56.	4B-9058	[2]	BEARING
57.	5C-2890 M	[4]	NUT (M6X1-THD)
58.	5M-8500	[1]	KNOB
59.	5P-9297	[1]	CLIP
60.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
61.	6V-7687 M	[1]	LOCKNUT (M12X1.75-THD)
62.	6V-8183	[1]	NUT-FULL (3/8-24-THD)
63.	6V-8397	[12]	SEAL-O-RING
64.	6V-8636	[4]	CONNECTOR
65.	6V-8724	[1]	ELBOW
66.	6V-9168	[1]	NUT (11/16-16-THD)
67.	6V-9807	[1]	UNION
68.	6V-9843	[1]	TEE
69.	7X-0554	[1]	WASHER-HARD (13.5X32X5-MM THK)
70.	7X-0594	[3]	WASHER-HARD (20X38X3-MM THK)
71.	7X-0618	[2]	WASHER-HARD (13.5X40X5-MM THK)
72.	7X-7729	[6]	WASHER (11X25X3-MM THK)
73.	8T-0075	[2]	CONNECTOR
74.	8T-0267 M	[4]	BOLT-SOCKET HEAD (M6X1X12-MM)
75.	8T-0269 M	[4]	BOLT-SOCKET HEAD (M6X1X20-MM)
76.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
77.	8T-4133 M	[2]	NUT (M10X1.5-THD)
78.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
79.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
80.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
81.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
82.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
83.	8T-4205	[6]	WASHER-HARD (7.2X14.5X2-MM THK)
84.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
85.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
86.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
87.	8T-9358	[1]	CONNECTOR
88.	9S-4191	[1]	PLUG (9/16-18-THD)
89.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION