AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

133-8182 GUARD GP-TRACK GUIDE S/N 4LS1-UP; 6BS1-UP; 8CS1-UP PART OF 115-1108, 115-1109, 137-6411 UNDERCARRIAGE AR D4C III


UNDERCARRIAGE
GUARD GP
IDLER GP
LINK GP-TRACK

TRACK-TYPE TRACTOR D4C III TRACK-TYPE TRACTOR 4LS
 D4C & D4C LGP, XL Series III Hystat Tractors 4LS00001-UP (MACHINE) POWERED BY 3046 Engine SEBP2687 D4C III 4LS   (1997)

UNDERCARRIAGE

GUARD GP
GUARD GP-IDLER
102-5937 GUARD GP-IDLER
GUARD GP-IDLER
108-1580 GUARD GP-IDLER
GUARD GP-RECOIL MECHANISM
125-4563 GUARD GP-RECOIL MECHANISM
GUARD GP-RECOIL MECHANISM
125-4563 GUARD GP-RECOIL MECHANISM
GUARD GP-RECOIL MECHANISM
125-4564 GUARD GP-RECOIL MECHANISM
GUARD GP-RECOIL MECHANISM
125-4570 GUARD GP-RECOIL MECHANISM
GUARD GP-TRACK GUIDE
133-8182 GUARD GP-TRACK GUIDE
GUARD GP-TRACK ROLLER
136-8525 GUARD GP-TRACK ROLLER
GUARD GP-TRACK ROLLER
138-9689 GUARD GP-TRACK ROLLER
 

#SEBP26870220
 

133-8182: GUARD GP-TRACK GUIDE

133-8182 GUARD GP-TRACK GUIDE
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 115-1108, 115-1109, 137-6411 UNDERCARRIAGE AR
i00557858 SEBP2687
1338182 GUARD GP-TRACK GUIDE Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-9545 [1] GUARD AS (RH OUTER)  
2. 128-9546 [1] GUARD AS (LH OUTER)  
3. 132-6622 [1] GUARD AS (INNER, RH; OUTER, LH)  
4. 132-6615 [1] GUARD AS (OUTER, RH; INNER, LH)  
5. 7X-0351 [16] BOLT (5/8-11X3.75-IN)  
6. 8T-4122 [16] WASHER-HARD (17X32X3.5-MM THK)  
7. 130-1437 [1] GUARD AS (RH INNER)  
8. 130-1428 [1] GUARD AS (LH INNER)  
9. 5C-6565 [8] BOLT (1/2-13X1.125-IN)  
10. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
11. 133-9599 [1] GUARD AS (RH)  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
12. 133-9600 [1] GUARD AS (LH)  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
13. 5S-7379 [8] BOLT (3/8-16X0.875-IN)  
14. 5P-1075 [14] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 128-9555 [2] GUARD  
16. 7X-0288 [4] BOLT (3/8-16X1.625-IN)  
17. 4L-6454 [2] BOLT (3/8-16X1-IN)  
18. 2B-7557 [4] CORK  
19. 130-1433 [4] SPACER (11X25X17-MM THK)  
 

#SEBP26870221
 

136-8525: GUARD GP-TRACK ROLLER

136-8525 GUARD GP-TRACK ROLLER
S/N 4LS1-UP; 6BS1-UP
AN ATTACHMENT
i00503706 SEBP2687
1368525 GUARD GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-1937 [2] GUARD AS (LH INNER/RH OUTER)  
    (EACH INCLUDES)
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
2. 138-1936 [2] GUARD AS (RH INNER/LH OUTER)  
    (EACH INCLUDES)
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
3. 8Y-1009 [8] PIPE  
4. 6M-9613 [8] BOLT (1/2-13X9-IN)  
5. 8T-4223 [40] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 6V-8188 [8] NUT (1/2-13-THD)  
7. 8Y-3413 [4] TAB  
8. 4L-6454 [4] BOLT (3/8-16X1-IN)  
9. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 8T-8917 [16] BOLT (1/2-13X1.25-IN)  
11. 138-1945 [4] PLATE  
12. 138-1946 [4] PLATE  
13. 8T-8919 [8] BOLT (1/2-13X1.75-IN)  
 

#SEBP26870222
 

138-9689: GUARD GP-TRACK ROLLER

138-9689 GUARD GP-TRACK ROLLER
S/N 8CS1-UP
AN ATTACHMENT
i00511648 SEBP2687
1389689 GUARD GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-9694 [2] GUARD AS (OUTER, RH; INNER, LH)  
    (EACH INCLUDES)
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
2. 138-9695 [2] GUARD AS (OUTER, LH; INNER, RH)  
    (EACH INCLUDES)
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
3. 8Y-1009 [10] PIPE  
4. 8T-8917 [20] BOLT (1/2-13X1.25-IN)  
5. 8T-4223 [48] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 6M-9613 [10] BOLT (1/2-13X9-IN)  
7. 6V-8188 [10] NUT (1/2-13-THD)  
8. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 4L-6454 [4] BOLT (3/8-16X1-IN)  
10. 8Y-3413 [4] TAB  
12. 138-1946 [4] PLATE  
13. 138-1945 [4] PLATE  
 

#SEBP26870223
 

5G-4380: IDLER GP-FRONT

5G-4380 IDLER GP-FRONT
S/N 4LS1-538; 6BS1-694
A FAMILY
PART OF 115-1108, 115-1109 UNDERCARRIAGE AR
i00197084 SEBP2687
5G4380 IDLER GP-FRONT Parts scheme 5G4380 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-1067 [2] WASHER (13.5X50.8X11.1-MM THK)  
2. 2S-5925 [2] FITTING-GREASE  
3. 2S-5926 [2] VALVE-RELIEF  
4. 2V-7524 [2] STOP-RECOIL SPRING (LH INNER/RH OUTER)  
5. 2V-7525 [2] STOP-RECOIL SPRING (RH INNER/LH OUTER)  
6. 2V-9025 [2] PILOT-RECOIL SPRING  
7. 5G-4381 [2] YOKE AS  
8. 5M-6708 [4] WASHER (0.609X1.25X0.219-IN THK)  
9. 5P-9446 [2] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
10. 6S-3286 B [16] SHIM (1.5-MM THK)  
11. 6S-7220 [4] PLATE AS  
12. 6S-8797 [2] BEARING  
13. 6S-8952 [2] HEAD GP  
14. 7B-3028 [8] SCREW-DRIVE (NO 4X 3/16-IN)  
15. 7X-0588 [8] WASHER-HARD (17X27X3.5-MM THK)  
16. 8Y-2735 [2] SPRING  
17. 8Y-2736 [2] PIPE  
18. 9H-4105 [4] DOWEL  
19. 112-4297 [2] CYLINDER AS  
20. 119-5778 [2] SEAL AS-U-CUP  
21. 167-2452 [2] SEAL-WIPER  
22. 185-4037 Y [2] IDLER GP-TRACK  
23. 5P-2566 [24] BOLT (1/2-13X1.5-IN)  
24. 7X-0347 [8] BOLT (5/8-11X2.25-IN)  
25. 7X-0451 [2] NUT-FULL (1-1/4-7-THD)  
26. 7X-0584 [24] WASHER-HARD (13.5X20.5X2-MM THK)  
27. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
28. 8T-9393 [8] BOLT (5/8-11X1.5-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP26870224
 

5G-4380: IDLER GP-FRONT

5G-4380 IDLER GP-FRONT
S/N 4LS539-UP; 6BS695-UP
A FAMILY
PART OF 115-1108, 115-1109 UNDERCARRIAGE AR
i01747364 SEBP2687
5G4380 IDLER GP-FRONT Parts scheme 5G4380 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-1067 [2] WASHER (13.5X50.8X11.1-MM THK)  
2. 190-8609 C [2] VALVE-FILL  
3. 2S-5926 [2] VALVE-RELIEF  
4. 2V-7524 [2] STOP-RECOIL SPRING (LH INNER/RH OUTER)  
5. 2V-7525 [2] STOP-RECOIL SPRING (RH INNER/LH OUTER)  
6. 2V-9025 [2] PILOT-RECOIL SPRING  
7. 5G-4381 [2] YOKE AS  
8. 5M-6708 [4] WASHER (0.609X1.25X0.219-IN THK)  
9. 5P-9446 [2] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
10. 6S-3286 B [16] SHIM (1.5-MM THK)  
11. 6S-7220 [4] PLATE AS  
12. 6S-8797 [2] BEARING  
13. 6S-8952 [2] HEAD GP  
14. 7B-3028 [8] SCREW-DRIVE (NO 4X 3/16-IN)  
15. 7X-0588 [8] WASHER-HARD (17X27X3.5-MM THK)  
16. 8Y-2735 [2] SPRING  
17. 8Y-2736 [2] PIPE  
18. 9H-4105 [4] DOWEL  
19. 112-4297 [2] CYLINDER AS  
20. 119-5778 [2] SEAL AS-U-CUP  
21. 167-2452 [2] SEAL-WIPER  
22. 185-4037 CY [1] IDLER GP-TRACK (RH)  
23. 5P-2566 [24] BOLT (1/2-13X1.5-IN)  
24. 7X-0347 [8] BOLT (5/8-11X2.25-IN)  
25. 7X-0451 [2] NUT-FULL (1-1/4-7-THD)  
26. 7X-0584 [24] WASHER-HARD (13.5X20.5X2-MM THK)  
27. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
28. 8T-9393 [8] BOLT (5/8-11X1.5-IN)  
29. 164-1047 CY [1] IDLER GP-TRACK (LH)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26870225
 

6S-7272: IDLER GP-FRONT

6S-7272 IDLER GP-FRONT
S/N 8CS1-1254
PART OF 137-6411 UNDERCARRIAGE AR
i00197296 SEBP2687
6S7272 IDLER GP-FRONT Parts scheme 6S7272 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-1067 [2] WASHER (13.5X50.8X11.1-MM THK)  
2. 2S-5925 [2] FITTING-GREASE  
3. 2S-5926 [2] VALVE-RELIEF  
4. 2V-7524 [2] STOP-RECOIL SPRING (RH OUTER-LH INNER)  
5. 2V-7525 [2] STOP-RECOIL SPRING (RH INNER-LH OUTER)  
6. 2V-9025 [2] PILOT-RECOIL SPRING  
7. 5M-6708 [4] WASHER (0.609X1.25X0.219-IN THK)  
8. 5P-9446 [2] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
9. 6S-3286 B [16] SHIM (1.5-MM THK)  
10. 6S-7220 [4] PLATE AS  
11. 6S-7399 [2] YOKE AS-IDLER  
12. 6S-8797 [2] BEARING  
13. 6S-8952 [2] HEAD GP  
14. 7B-3028 [8] SCREW-DRIVE (NO 4X 3/16-IN)  
15. 7X-0588 [8] WASHER-HARD (17X27X3.5-MM THK)  
16. 8Y-2735 [2] SPRING  
17. 8Y-2736 [2] PIPE  
18. 9H-4105 [4] DOWEL  
19. 112-4297 [2] CYLINDER AS  
20. 119-5778 [2] SEAL AS-U-CUP  
21. 167-2452 [2] SEAL-WIPER  
22. 185-4037 CY [2] IDLER GP-TRACK  
23. 5P-2566 [24] BOLT (1/2-13X1.5-IN)  
24. 7X-0347 [8] BOLT (5/8-11X2.25-IN)  
25. 7X-0451 [2] NUT-FULL (1-1/4-7-THD)  
26. 7X-0584 [24] WASHER-HARD (13.5X20.5X2-MM THK)  
27. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
28. 8T-9393 [8] BOLT (5/8-11X1.5-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26870226
 

6S-7272: IDLER GP-FRONT

6S-7272 IDLER GP-FRONT
S/N 8CS1255-UP
PART OF 137-6411 UNDERCARRIAGE AR
i01747417 SEBP2687
6S7272 IDLER GP-FRONT Parts scheme 6S7272 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-1067 [2] WASHER (13.5X50.8X11.1-MM THK)  
2. 190-8609 C [2] VALVE-FILL  
3. 2S-5926 [2] VALVE-RELIEF  
4. 2V-7524 [2] STOP-RECOIL SPRING (RH OUTER-LH INNER)  
5. 2V-7525 [2] STOP-RECOIL SPRING (RH INNER-LH OUTER)  
6. 2V-9025 [2] PILOT-RECOIL SPRING  
7. 5M-6708 [4] WASHER (0.609X1.25X0.219-IN THK)  
8. 5P-9446 [2] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
9. 6S-3286 B [16] SHIM (1.5-MM THK)  
10. 6S-7220 [4] PLATE AS  
11. 6S-7399 [2] YOKE AS-IDLER  
12. 6S-8797 [2] BEARING  
13. 6S-8952 [2] HEAD GP  
14. 7B-3028 [8] SCREW-DRIVE (NO 4X 3/16-IN)  
15. 7X-0588 [8] WASHER-HARD (17X27X3.5-MM THK)  
16. 8Y-2735 [2] SPRING  
17. 8Y-2736 [2] PIPE  
18. 9H-4105 [4] DOWEL  
19. 112-4297 [2] CYLINDER AS  
20. 119-5778 [2] SEAL AS-U-CUP  
21. 167-2452 [2] SEAL-WIPER  
22. 164-1047 CY [1] IDLER GP-TRACK (LH)  
23. 5P-2566 [24] BOLT (1/2-13X1.5-IN)  
24. 7X-0347 [8] BOLT (5/8-11X2.25-IN)  
25. 7X-0451 [2] NUT-FULL (1-1/4-7-THD)  
26. 7X-0584 [24] WASHER-HARD (13.5X20.5X2-MM THK)  
27. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
28. 8T-9393 [8] BOLT (5/8-11X1.5-IN)  
29. 185-4037 CY [1] IDLER GP-TRACK (RH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26870227
 

164-1047: IDLER GP-TRACK

164-1047 IDLER GP-TRACK
S/N 4LS539-UP; 6BS695-UP; 8CS1255-UP
LH
PART OF 5G-4380, 6S-7272 IDLER GP-FRONT
i01542310 SEBP2687
1641047 IDLER GP-TRACK Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-5000 [2] LOCK-PIN  
2. 6S-3285 [2] SEAL GP-DUO-CONE  
3. 6S-3451 [1] BEARING-IDLER  
4. 6S-3453 [1] BEARING-IDLER  
5. 6S-3697 [1] SHAFT  
6. 6S-7715 [2] WASHER-THRUST (52X86X6.35-MM THK)  
7. 9F-2247 [1] PLUG-PIPE  
8. 106-9187 [1] IDLER & BEARING AS  
9. 1H-9696 [2] SEAL-O-RING  
10. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
11. 8C-6877 [2] BOLT (7/16-14X1.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26870228
 

185-4037: IDLER GP-TRACK

185-4037 IDLER GP-TRACK
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 5G-4380, 6S-7272 IDLER GP-FRONT
i01542313 SEBP2687
1854037 IDLER GP-TRACK Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-5000 [2] LOCK-PIN  
2. 6S-3285 [2] SEAL GP-DUO-CONE  
3. 6S-3451 [1] BEARING-IDLER  
4. 6S-3453 [1] BEARING-IDLER  
5. 6S-3697 [1] SHAFT  
6. 6S-7715 [2] WASHER-THRUST (52X86X6.35-MM THK)  
7. 9F-2247 [1] PLUG-PIPE  
8. 106-9187 [1] IDLER & BEARING AS  
9. 1H-9696 [2] SEAL-O-RING  
10. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
11. 8C-6877 [2] BOLT (7/16-14X1.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26870229
 

105-0247: LINK AS-TRACK

105-0247 LINK AS-TRACK
S/N 8CS1-UP
SEALED & LUBRICATED
PART OF 104-8661 TRACK GP
i00198116 SEBP2687
1050247 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-0937 [1] LINK-MASTER (PIN END, RH)  
2. 6Y-0938 [1] LINK-MASTER (PIN END, LH)  
3. 6Y-0939 [1] LINK-MASTER (BUSHING END, RH)(RH)  
4. 6Y-0940 [1] LINK-MASTER (BUSHING END, LH)(LH)  
5. 6Y-0935 [40] LINK-TRACK (RH)  
6. 6Y-0936 [40] LINK-TRACK (LH)  
7. 111-1522 [41] BUSHING-TRACK  
8. 6S-9055 [41] PIN-TRACK  
9. 6T-4206 [82] SEAL AS  
10. 6S-9049 [82] RING-THRUST  
11. 6Y-0473 [41] PLUG-CLEAR  
  5G-2247 [41] STOPPER-RUBBER  
 

Information:

Caterpillar Parts SIS Catalog D4C III :

GUARD GP-RECOIL MECHANISM
125-4570 GUARD GP-RECOIL MECHANISM
GUARD GP-RECOIL MECHANISM
125-4564 GUARD GP-RECOIL MECHANISM
GUARD GP-RECOIL MECHANISM
125-4563 GUARD GP-RECOIL MECHANISM
GUARD GP-RECOIL MECHANISM
125-4563 GUARD GP-RECOIL MECHANISM
GUARD GP-IDLER
108-1580 GUARD GP-IDLER
GUARD GP-IDLER
102-5937 GUARD GP-IDLER
FRAME GP-TRACK ROLLER
125-4559 FRAME GP-TRACK ROLLER
FRAME GP-TRACK ROLLER
125-4553 FRAME GP-TRACK ROLLER
GUARD GP-TRACK ROLLER
136-8525 GUARD GP-TRACK ROLLER
GUARD GP-TRACK ROLLER
138-9689 GUARD GP-TRACK ROLLER
IDLER GP-FRONT
5G-4380 IDLER GP-FRONT
IDLER GP-FRONT
5G-4380 IDLER GP-FRONT
IDLER GP-FRONT
6S-7272 IDLER GP-FRONT
IDLER GP-FRONT
6S-7272 IDLER GP-FRONT
IDLER GP-TRACK
164-1047 IDLER GP-TRACK
IDLER GP-TRACK
185-4037 IDLER GP-TRACK

Truck sale:

Caterpillar D4CIIILGP, Construction
22,500 
Caterpillar D4CIIILGP, Construction
- Dozers
MICHIGAN CAT
Caterpillar D4CIII, Construction
29,500 
Caterpillar D4CIII, Construction
- Dozers
MICHIGAN CAT
Caterpillar D4CIIIXL, Construction
22,400 
Caterpillar D4CIIIXL, Construction
- Dozers
N C MACHINERY CO.
CATERPILLAR D4CIII 1997
 
CATERPILLAR D4CIII 1997
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4CIII 2000
 
CATERPILLAR D4CIII 2000
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.