AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

139-7683 LINES GP-ANGLE & TILT S/N 8LP1-UP PART OF 139-7680 BULLDOZER AR-PWR ANGLE & TILT AN ATTACHMENT D4C III


HYDRAULIC SYSTEM
LINES GP-CYLINDER
LINES GP-HYDRAULIC
LINES GP-PILOT
LINES GP-PUMP
LINES GP-REAR

TRACK-TYPE TRACTOR D4C III TRACK-TYPE TRACTOR 4LS
 D4C & D4C LGP, XL Series III Hystat Tractors 4LS00001-UP (MACHINE) POWERED BY 3046 Engine SEBP2687 D4C III 4LS   (1997)

HYDRAULIC SYSTEM

LINES GP-CYLINDER
LINES GP-ANGLE & TILT
139-7683 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
139-7683 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
8E-7558 LINES GP-ANGLE & TILT
 

#SEBP26870290
 

139-7683: LINES GP-ANGLE & TILT

139-7683 LINES GP-ANGLE & TILT
S/N 8LP1-UP
PART OF 139-7680 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00958705 SEBP2687
1397683 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-8236 [2] PLATE  
2. 6S-9052 [1] GUARD  
3. 8T-1885 [2] CLIP (SLOT)  
4. 8T-1886 [2] CLIP (TAB)  
5. 140-6324 [2] TUBE AS  
6. 141-9927 [2] CLIP  
7. 142-0114 I [2] HOSE AS  
8. 142-0420 [1] TUBE AS  
9. 142-0443 I [2] HOSE AS  
10. 143-4706 I [4] HOSE AS  
11. 143-7291 [1] COVER AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
  8R-5144 [2] WASHER (12X30X9-MM THK)  
12. 143-7715 [1] COVER AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
  8R-5144 [2] WASHER (12X30X9-MM THK)  
13. 143-7781 [1] COVER AS  
14. 143-7836 [1] COVER AS  
15. 144-1232 I [2] HOSE AS  
16. 144-5739 I [2] HOSE AS  
17. 145-3348 [2] GUARD AS  
18. 149-2360 C [1] TUBE AS  
19. 149-3247 C [1] TUBE AS  
20. 149-3248 C [1] TUBE AS  
21. 149-3249 C [1] TUBE AS  
22. 149-3250 C [1] TUBE AS  
23. 149-7525 C [1] TUBE AS  
24. 149-7526 C [1] TUBE AS  
25. 152-8329 C [1] COVER AS  
26. 152-8396 C [1] GUARD  
27. 3K-0360 [6] SEAL-O-RING  
28. 4L-6454 [2] BOLT (3/8-16X1-IN)  
29. 5M-3062 [6] BOLT (3/8-16X0.75-IN)  
30. 5P-1075 [20] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
32. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
33. 6V-8397 [24] SEAL-O-RING  
34. 6V-8398 C [6] SEAL-O-RING  
35. 6V-8634 [2] CONNECTOR  
36. 6V-8723 [4] ELBOW  
37. 6V-8994 [1] UNION (STRAIGHT)  
38. 6V-8995 [3] UNION (STRAIGHT)  
39. 6V-9168 [1] NUT (11/16-16-THD)  
40. 6V-9169 [3] NUT (13/16-16-THD)  
41. 6V-9836 [2] TEE-SWIVEL  
42. 7X-0326 [4] BOLT (1/2-13X3-IN)  
43. 8T-2501 [4] BOLT (3/8-16X2-IN)  
44. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP26870291
 

8E-7558: LINES GP-ANGLE & TILT

8E-7558 LINES GP-ANGLE & TILT
S/N 9SH1-UP
PART OF 138-6608 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00197795 SEBP2687
8E7558 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0326 [4] BOLT (1/2-13X3-IN)  
  5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
2. 5G-0682 I [4] HOSE AS  
3. 6S-4710 I [2] HOSE AS  
4. 005-4362 [4] ELBOW  
5. 3K-0360 [6] SEAL-O-RING  
6. 6S-8236 [2] PLATE  
7. 6S-8021 [2] GUARD AS  
    (EACH INCLUDES)
  3S-3158 [2] PIPE  
8. 7B-1598 [2] CLIP  
9. 8E-7337 [1] TUBE AS  
10. 6S-8040 I [2] HOSE AS  
11. 6S-4728 [2] TUBE AS  
12. 2V-0156 I [2] HOSE AS  
13. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
14. 6S-9052 [1] GUARD  
15. 030-8188 [2] CONNECTOR  
16. 8T-2501 [4] BOLT (3/8-16X2-IN)  
17. 6S-9054 [1] TUBE AS  
18. 5M-3062 [7] BOLT (3/8-16X0.75-IN)  
19. 5P-1075 [17] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 8E-7338 [1] TUBE AS  
21. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
22. 8E-9992 [1] GUARD AS  
23. 8E-7339 [1] TUBE AS  
24. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
25. 4L-6454 [4] BOLT (3/8-16X1-IN)  
26. 6S-6477 [1] GUARD  
27. 1P-1441 [6] NUT-FLARED (3/4-16-THD)  
  030-8144 [6] REDUCER-FLARED  
28. 8E-9998 [1] GUARD AS  
29. 8E-7559 [1] GUARD AS  
  9F-2978 [2] NUT-WELD (3/8-16-THD)  
30. 8E-5550 [2] CLIP  
31. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP26870292
 

115-1079: LINES GP-HYDRAULIC

115-1079 LINES GP-HYDRAULIC
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 115-1074 HYDRAULIC AR
i00557660 SEBP2687
1151079 LINES GP-HYDRAULIC Parts scheme 1151079 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 2M-9780 [6] SEAL-O-RING  
3. 6V-8398 [27] SEAL-O-RING  
4. 117-9963 [1] TUBE AS  
5. 117-9953 [4] TUBE AS  
6. 8T-6876 [4] ELBOW  
7. 3J-1907 [8] SEAL-O-RING  
8. 6V-8642 [2] CONNECTOR  
9. 7J-9108 [4] SEAL-O-RING  
10. 117-9955 [1] TUBE AS  
11. 6V-9272 [2] TEE-UNION  
12. 120-6445 I [2] HOSE AS  
13. 120-6446 I [2] HOSE AS  
14. 1H-5948 [2] CLAMP-TUBE  
15. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
16. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
18. 117-9959 [1] TUBE AS  
19. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
20. 117-9956 [1] TUBE AS  
21. 117-9958 [1] TUBE AS  
22. 6V-8638 [4] CONNECTOR  
23. 117-9961 [1] TUBE AS  
24. 117-9962 [1] TUBE AS  
25. 117-9954 [1] TUBE AS  
26. 117-9951 [1] TUBE AS  
27. 117-9952 [1] TUBE AS  
28. 8T-1885 [8] CLIP (SLOT)  
29. 8T-1886 [8] CLIP (TAB)  
30. 8T-4133 M [1] NUT (M10X1.5-THD)  
31. 6S-4709 [2] BLOCK AS  
32. 7X-2549 M [4] BOLT (M12X1.75X100-MM)  
33. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 6V-8636 [4] CONNECTOR  
35. 6V-9851 [3] ELBOW  
36. 9X-8250 [2] CLIP  
37. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
38. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
39. 138-2920 [1] PLATE  
40. 8T-4136 LM [1] BOLT (M10X1.5X25-MM)  
41. 8T-4121 L [1] WASHER-HARD (11X21X2.5-MM THK)  
42. 6V-8639 [4] CONNECTOR  
43. 3K-0360 [4] SEAL-O-RING  
44. 6V-8397 [4] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  L   USE WITH CAB ONLY
  M   METRIC PART
 

#SEBP26870293
 

143-1342: LINES GP-PILOT

143-1342 LINES GP-PILOT
S/N 4LS1-371; 6BS1-340; 8CS1-509
PART OF 113-8303, 113-8304 POWER TRAIN AR
i00504922 SEBP2687
1431342 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-7793 Y [1] VALVE GP-PILOT  
2. 117-6099 I [1] HOSE AS  
3. 6U-0455 [2] STRAP  
4. 117-6100 [1] TUBE AS  
5. 117-6103 I [1] HOSE AS  
6. 117-6104 I [1] HOSE AS  
7. 117-6105 I [1] HOSE AS  
8. 117-6106 I [1] HOSE AS  
9. 6V-8636 [6] CONNECTOR  
10. 6V-8397 [18] SEAL-O-RING  
11. 3J-1907 [17] SEAL-O-RING  
12. 146-1633 [1] TUBE AS  
13. 153-2379 [1] TUBE AS  
14. 7X-2459 [1] ADAPTER-TEE  
15. 6V-0852 [1] CAP-DUST  
16. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
17. 6V-8724 [6] ELBOW  
18. 6V-9850 [1] ELBOW  
19. 146-2690 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
20. 117-6089 [1] PLATE  
21. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
22. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-0269 M [4] BOLT-SOCKET HEAD (M6X1X20-MM)  
24. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
25. 7X-7729 [6] WASHER (11X25X3-MM THK)  
26. 9S-4191 [2] PLUG (9/16-18-THD)  
27. 125-2757 [1] FILM-INSTRUCTION (SPEED)  
28. 8T-4133 M [4] NUT (M10X1.5-THD)  
29. 146-2702 [1] BRACKET AS  
  6D-3787 [1] BEARING-ROLLER  
  7T-1099 [1] LINK  
30. 146-2694 [1] LEVER AS  
  9R-2821 M [2] BOSS (M10X1.5X15-MM)  
31. 2M-8908 [1] KNOB  
32. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
33. 8T-6431 [1] ROD END  
34. 4M-1768 [1] SPRING-DETENT  
35. 6V-8781 [1] TEE  
36. 8T-8902 [2] ADAPTER-TEE  
37. 7X-0594 [2] WASHER-HARD (20X38X3-MM THK)  
38. 2J-6356 [1] RING-RETAINING  
39. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
40. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
41. 3T-1078 Y [1] VALVE GP-BRAKE  
42. 8E-4525 [1] BOOT  
43. 6G-6396 [1] WASHER  
44. 6V-9197 [1] LOCK PIN  
45. 1B-0676 [1] PIN  
46. 6Y-2851 [1] ROD-EYE  
47. 6V-8801 [1] NUT (3/8-16-THD)  
48. 8T-5063 [1] ROD END  
49. 117-6095 [1] ROD  
50. 9X-4157 [1] SWITCH AS-NEUTRAL START (TRANSMISSION LOCK)  
  6V-8376 [4] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [4] LOCKWASHER  
51. 2Y-5829 M [1] NUT (M10X1.5-THD)  
52. 135-9495 [1] ROD  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26870294
 

156-1936: LINES GP-PILOT

156-1936 LINES GP-PILOT
S/N 4LS270-371; 6BS341-452; 8CS510-720
PART OF 113-8303, 113-8304 POWER TRAIN AR
i00960341 SEBP2687
1561936 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 156-2600 Y [1] VALVE GP-PILOT  
2. 117-6099 I [1] HOSE AS  
3. 6U-0455 [2] STRAP  
4. 117-6100 [1] TUBE AS  
5. 117-6103 I [1] HOSE AS  
6. 117-6104 I [1] HOSE AS  
7. 117-6105 I [1] HOSE AS  
8. 117-6106 I [1] HOSE AS  
9. 6V-8636 [6] CONNECTOR  
10. 6V-8397 [18] SEAL-O-RING  
11. 3J-1907 [17] SEAL-O-RING  
12. 146-1633 [1] TUBE AS  
13. 153-2379 [1] TUBE AS  
14. 7X-2459 [1] ADAPTER-TEE  
15. 6V-0852 [1] CAP-DUST  
16. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
17. 6V-8724 [6] ELBOW  
18. 6V-9850 [1] ELBOW  
19. 146-2702 [1] BRACKET AS  
  6D-3787 [1] BEARING-ROLLER  
  7T-1099 [1] LINK  
20. 117-6089 [1] PLATE  
21. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
22. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-0269 M [4] BOLT-SOCKET HEAD (M6X1X20-MM)  
24. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 7X-7729 [6] WASHER (11X25X3-MM THK)  
26. 146-2694 [1] LEVER AS  
  9R-2821 M [2] BOSS (M10X1.5X15-MM)  
27. 8T-8902 [2] ADAPTER-TEE  
28. 8T-4133 M [4] NUT (M10X1.5-THD)  
29. 125-2757 [1] FILM-INSTRUCTION (SPEED)  
30. 146-2690 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
31. 2M-8908 [1] KNOB  
32. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
33. 8T-6431 [1] ROD END  
34. 4M-1768 [1] SPRING-DETENT  
35. 6V-8781 [1] TEE  
36. 7X-0594 [2] WASHER-HARD (20X38X3-MM THK)  
37. 2J-6356 [1] RING-RETAINING  
38. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
39. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
40. 3T-1078 Y [1] VALVE GP-BRAKE  
41. 8E-4525 [1] BOOT  
42. 6G-6396 [1] WASHER  
43. 6V-9197 [1] LOCK PIN  
44. 1B-0676 [1] PIN  
45. 6Y-2851 [1] ROD-EYE  
46. 6V-8801 [1] NUT (3/8-16-THD)  
47. 8T-5063 [1] ROD END  
48. 117-6095 [1] ROD  
49. 9X-4157 [1] SWITCH AS-NEUTRAL START  
  6V-8376 [4] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [4] LOCKWASHER  
50. 2Y-5829 M [1] NUT (M10X1.5-THD)  
51. 135-9495 [1] ROD  
52. 9S-4191 [2] PLUG (9/16-18-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26870295
 

164-6425: LINES GP-PILOT

164-6425 LINES GP-PILOT
S/N 4LS443-UP; 6BS557-UP; 8CS936-UP
PART OF 113-8303, 113-8304 POWER TRAIN AR
i01065595 SEBP2687
1646425 LINES GP-PILOT Parts scheme 1646425 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-7819 [1] RING-RETAINING  
2. 2M-8908 [1] KNOB  
3. 3S-2093 [1] STRAP-CABLE  
4. 4L-7049 [1] NUT (9/16-18-THD)  
5. 4M-1768 [1] SPRING-DETENT  
6. 6K-0806 [1] STRAP-CABLE  
7. 6U-0455 [2] STRAP  
8. 6V-0852 [1] CAP-DUST  
9. 7S-5757 [1] RING-RETAINING  
10. 8C-3111 [2] ROD END  
11. 9X-4157 [1] SWITCH AS-NEUTRAL START  
  6V-8376 [4] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [4] LOCKWASHER  
12. 009-8670 [6] WASHER (SPRING)  
13. 117-6103 I [1] HOSE AS  
14. 117-6104 I [1] HOSE AS  
15. 117-6105 I [1] HOSE AS  
16. 117-6106 I [1] HOSE AS  
17. 125-2757 [1] FILM-INSTRUCTION (SPEED)  
18. 135-9495 [1] ROD  
19. 146-1633 [1] TUBE AS  
20. 161-0023 [1] BRACKET AS  
  6D-3787 [1] BEARING-ROLLER  
  7T-1099 [1] LINK  
21. 161-0532 [1] PLATE  
22. 161-0747 [1] PLATE AS  
23. 161-3986 [1] LEVER AS  
  9S-6465 [1] BEARING-ROLLER  
24. 161-4419 [1] LEVER AS  
25. 161-5659 [1] LEVER AS  
  8T-1177 [1] BEARING-ROLLER  
26. 161-6181 [1] YOKE AS  
27. [2] LEVER  
28. [1] ROD  
29. 161-6629 [1] PIN  
30. 163-3902 [1] BRACKET AS  
31. 163-3906 [1] SHAFT  
32. 163-3908 [1] CLEVIS  
33. 163-3910 [1] ROD  
34. 163-4579 [2] SPACER (11-MM THK)  
35. 163-5503 [1] COLLAR  
36. 163-5504 [2] DISC  
37. 163-7799 [1] TUBE AS  
38. 164-3879 [1] PLATE  
39. 164-3880 [1] SEAL (9.6-MM ID)  
40. 164-3942 [2] SPACER (6-MM THK)  
41. 164-9438 Y [1] VALVE GP-PILOT  
42. 165-8409 [1] ROD END  
43. 166-0643 [1] FILM-INSTRUCTION (SPEED HOLD CONTROL)  
44. 166-2334 [1] BOOT-DUST  
45. 169-2502 [1] LINK AS  
46. 174-3663 [1] BRACKET AS  
47. 174-4189 I [1] HOSE AS  
48. 217-3871 [1] BOLT  
49. 175-0107 [1] TUBE AS  
50. 1B-8702 [1] KEY-WOODRUFF  
51. 2J-6356 [2] RING-RETAINING  
52. 2Y-5829 M [1] NUT (M10X1.5-THD)  
53. 3B-4607 [1] PIN-COTTER  
54. 3J-1907 [9] SEAL-O-RING  
55. 4B-2913 [1] PIN-CLEVIS  
56. 4B-9058 [2] BEARING  
57. 5C-2890 M [4] NUT (M6X1-THD)  
58. 5M-8500 [1] KNOB  
59. 5P-9297 [1] CLIP (LOOP)  
60. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
61. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
62. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
63. 6V-8397 [12] SEAL-O-RING  
64. 6V-8636 [4] CONNECTOR  
65. 6V-8724 [1] ELBOW  
66. 6V-9168 [1] NUT (11/16-16-THD)  
67. 6V-9807 [1] UNION  
68. 6V-9843 [1] TEE  
69. 7X-0554 [1] WASHER-HARD (13.5X32X5-MM THK)  
70. 7X-0594 [3] WASHER-HARD (20X38X3-MM THK)  
71. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
72. 7X-7729 [6] WASHER (11X25X3-MM THK)  
73. 8T-0075 [2] CONNECTOR  
74. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
75. 8T-0269 M [4] BOLT-SOCKET HEAD (M6X1X20-MM)  
76. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
77. 8T-4133 M [2] NUT (M10X1.5-THD)  
78. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
79. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
80. 8T-4138 M [2] BOLT (M6X1X20-MM)  
81. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
82. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
83. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
84. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
85. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
86. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
87. 8T-9358 [1] CONNECTOR  
88. 9S-4191 [1] PLUG (9/16-18-THD)  
89. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26870296
 

166-6755: LINES GP-PILOT

166-6755 LINES GP-PILOT
S/N 4LS372-442; 6BS453-556; 8CS721-935
PART OF 113-8303, 113-8304 POWER TRAIN AR
i01058456 SEBP2687
1666755 LINES GP-PILOT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-7819 [1] RING-RETAINING  
2. 2M-8908 [1] KNOB  
3. 3S-2093 [1] STRAP-CABLE  
4. 3T-1078 Y [1] VALVE GP-BRAKE  
5. 4L-7049 [1] NUT (9/16-18-THD)  
6. 4M-1768 [1] SPRING-DETENT  
7. 6G-6396 [1] WASHER  
8. 6K-0806 [1] STRAP-CABLE  
9. 6U-0455 [2] STRAP  
10. 6V-0852 [1] CAP-DUST  
11. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
12. 6V-9197 [1] LOCK PIN  
13. 6Y-2851 [1] ROD-EYE  
14. 7S-5757 [1] RING-RETAINING  
15. 7X-2459 [1] ADAPTER-TEE  
16. 8C-3111 [2] ROD END  
17. 8E-4525 [1] BOOT  
18. 8T-5063 [1] ROD END  
19. 8T-6431 [1] ROD END  
20. 9X-4157 [1] SWITCH AS-NEUTRAL START  
  6V-8376 [4] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [4] LOCKWASHER  
21. 009-8670 [6] WASHER (SPRING)  
22. 117-6095 [1] ROD  
23. 117-6099 I [1] HOSE AS  
24. 117-6103 I [1] HOSE AS  
25. 117-6104 I [1] HOSE AS  
26. 117-6105 I [1] HOSE AS  
27. 117-6106 I [1] HOSE AS  
28. 125-2757 [1] FILM-INSTRUCTION (SPEED)  
29. 135-9495 [1] ROD  
30. 146-1633 [1] TUBE AS  
31. 146-2690 [1] BRACKET AS  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
32. 161-0023 [1] BRACKET AS  
  6D-3787 [1] BEARING-ROLLER  
  7T-1099 [1] LINK  
33. 161-0532 [1] PLATE  
34. 161-0747 [1] PLATE AS  
35. 161-3986 [1] LEVER AS  
  9S-6465 [1] BEARING-ROLLER  
36. 161-4419 [1] LEVER AS  
  6T-4753 [1] HUB  
  9R-2821 M [2] BOSS (M10X1.5X15-MM)  
37. 161-5659 [1] LEVER AS  
  8T-1177 [1] BEARING-ROLLER  
38. 161-6181 [1] YOKE AS  
39. [2] LEVER  
40. [1] ROD  
41. 161-6629 [1] PIN  
42. 163-3902 [1] BRACKET AS  
43. 163-3906 [1] SHAFT  
44. 163-3908 [1] CLEVIS  
45. 163-3910 [1] ROD  
46. 163-4579 [2] SPACER (11-MM THK)  
47. 163-5503 [1] COLLAR  
48. 163-5504 [2] DISC  
49. 163-7798 [1] TUBE AS  
50. 163-7799 [1] TUBE AS  
51. 164-3879 [1] PLATE  
52. 164-3880 [1] SEAL (9.6-MM ID)  
53. 164-3942 [2] SPACER (6-MM THK)  
54. 164-9438 Y [1] VALVE GP-PILOT  
55. 165-8409 [2] ROD END  
56. 166-0643 [1] FILM-INSTRUCTION (SPEED HOLD CONTROL)  
57. 166-2334 [1] BOOT-DUST  
58. [1] ROD  
59. 1B-0676 [1] PIN  
60. 1B-8702 [1] KEY-WOODRUFF  
61. 2J-6356 [2] RING-RETAINING  
62. 2Y-5829 M [1] NUT (M10X1.5-THD)  
63. 3B-4607 [1] PIN-COTTER  
64. 3J-1907 [16] SEAL-O-RING  
65. 4B-2913 [1] PIN-CLEVIS  
66. 1F-6887 [2] BEARING  
67. 5C-2890 M [5] NUT (M6X1-THD)  
68. 5M-8500 [1] KNOB  
69. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
70. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
71. 6V-8397 [16] SEAL-O-RING  
72. 6V-8636 [4] CONNECTOR  
73. 6V-8724 [6] ELBOW  
74. 6V-8781 [1] TEE  
75. 6V-8801 [1] NUT (3/8-16-THD)  
76. 6V-9850 [1] ELBOW  
77. 7X-0594 [3] WASHER-HARD (20X38X3-MM THK)  
78. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
79. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
80. 7X-7729 [7] WASHER (11X25X3-MM THK)  
81. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
82. 8T-0269 M [4] BOLT-SOCKET HEAD (M6X1X20-MM)  
83. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
84. 8T-4133 M [4] NUT (M10X1.5-THD)  
85. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
86. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
87. 8T-4138 M [2] BOLT (M6X1X20-MM)  
88. 7X-0554 [1] WASHER-HARD (13.5X32X5-MM THK)  
89. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
90. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
91. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
92. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
93. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
94. 9S-4191 [1] PLUG (9/16-18-THD)  
95. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
96. 8T-0075 [2] CONNECTOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26870297
 

115-1081: LINES GP-PUMP

115-1081 LINES GP-PUMP
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 115-1074 HYDRAULIC AR
Type 1
i00489891 SEBP2687
1151081 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7927 [1] CONNECTOR  
2. 3D-2824 [1] SEAL-O-RING  
3. 6V-9746 [7] SEAL-O-RING  
4. 8T-3613 [1] FITTING  
5. 6V-0852 [1] CAP-DUST  
6. 144-4273 [1] TUBE AS  
7. 144-4276 I [1] HOSE AS  
8. 144-4274 [1] TUBE AS  
9. 5K-9660 [1] CLIP (LOOP)  
10. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
11. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
12. 6V-8637 [1] CONNECTOR  
13. 144-4275 [1] BRACKET AS  
  9R-2672 M [2] BOSS-THREADED (M10X1.5X120-MM)  
14. 6V-8640 [1] CONNECTOR  
15. 2M-9780 [2] SEAL-O-RING  
16. 144-4272 [1] TUBE AS  
17. 144-4271 I [1] HOSE AS  
18. 6V-9182 [1] ELBOW  
19. 7M-8485 [2] SEAL-O-RING  
20. 8T-1887 [2] CLIP (SLOT)  
21. 8T-1888 [2] CLIP (TAB)  
22. 1N-5998 [1] PLUG  
23. 6K-6307 [1] SEAL-O-RING  
24. 8T-3611 [1] CONNECTOR  
25. 6V-8400 [2] SEAL-O-RING  
26. 2S-4078 [1] SEAL-O-RING  
27. 116-1869 [1] TUBE AS  
28. 141-4735 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26870298
 

115-1081: LINES GP-PUMP

115-1081 LINES GP-PUMP
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 115-1074 HYDRAULIC AR
Type 2
i02489702 SEBP2687
1151081 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7927 [1] CONNECTOR  
2. 3D-2824 [1] SEAL-O-RING  
3. 6V-9746 [7] SEAL-O-RING  
4. 8T-3613 [1] FITTING  
5. 6V-0852 [1] CAP-DUST  
6. 144-4273 [1] TUBE AS  
7. 144-4276 I [1] HOSE AS  
8. 144-4274 [1] TUBE AS  
9. 5K-9660 [1] CLIP (LOOP)  
10. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
11. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
12. 6V-8637 [1] CONNECTOR  
13. 144-4275 [1] BRACKET AS  
  9R-2672 M [2] BOSS-THREADED (M10X1.5X120-MM)  
14. 6V-8640 [1] CONNECTOR  
15. 2M-9780 [2] SEAL-O-RING  
16. 144-4272 [1] TUBE AS  
17. 144-4271 I [1] HOSE AS  
18. 6V-9182 [1] ELBOW  
19. 7M-8485 [2] SEAL-O-RING  
20. 8T-1887 [2] CLIP (SLOT)  
21. 8T-1888 [2] CLIP (TAB)  
22. 8T-3611 [1] CONNECTOR  
23. 6V-8400 [2] SEAL-O-RING  
24. 2S-4078 [1] SEAL-O-RING  
25. 116-1869 [1] TUBE AS  
26. 141-4735 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP26870299
 

8Y-0246: LINES GP-REAR ATTACHMENT

8Y-0246 LINES GP-REAR ATTACHMENT
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 8Y-7126 HYDRAULIC AR
AN ATTACHMENT
i00197100 SEBP2687
8Y0246 LINES GP-REAR ATTACHMENT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-4584 [2] CONNECTOR  
  2M-9780 [2] SEAL-O-RING  
2. 8Y-1501 [1] TUBE AS  
3. 8Y-1502 [1] TUBE AS  
4. 5G-2090 [1] BRACKET AS  
  9F-2978 [2] NUT-WELD (3/8-16-THD)  
5. 5M-3062 [6] BOLT (3/8-16X0.75-IN)  
6. 6S-7378 [1] CLAMP AS  
  6S-7374 [1] CLAMP  
  9F-2978 [1] NUT-WELD (3/8-16-THD)  
7. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
8. 5G-0933 [2] TUBE AS  
9. 6J-7366 [2] CAP-FLARED  
10. 7F-2060 [2] LOCKNUT (7/8-14-THD)  
11. 6S-4340 [1] PLATE  
12. 6V-8801 [3] NUT (3/8-16-THD)  
 

Information:

Caterpillar Parts SIS Catalog D4C III :

LINES GP-ANGLE & TILT
139-7683 LINES GP-ANGLE & TILT
8Y-7126 HYDRAULIC AR
115-1074 HYDRAULIC AR
CYLINDER GP-TILT
9J-8674 CYLINDER GP-TILT
CYLINDER GP-TILT
143-7219 CYLINDER GP-TILT
CYLINDER GP-TILT
143-7219 CYLINDER GP-TILT
CYLINDER GP-RIPPER
7J-9920 CYLINDER GP-RIPPER
CYLINDER GP-BULLDOZER LIFT
7J-9223 CYLINDER GP-BULLDOZER LIFT
LINES GP-ANGLE & TILT
8E-7558 LINES GP-ANGLE & TILT
LINES GP-HYDRAULIC
115-1079 LINES GP-HYDRAULIC
LINES GP-PILOT
143-1342 LINES GP-PILOT
LINES GP-PILOT
156-1936 LINES GP-PILOT
LINES GP-PILOT
164-6425 LINES GP-PILOT
LINES GP-PILOT
166-6755 LINES GP-PILOT
LINES GP-PUMP
115-1081 LINES GP-PUMP
LINES GP-PUMP
115-1081 LINES GP-PUMP

Truck sale:

Caterpillar D4CIIILGP, Construction
22,500 
Caterpillar D4CIIILGP, Construction
- Dozers
MICHIGAN CAT
Caterpillar D4CIII, Construction
29,500 
Caterpillar D4CIII, Construction
- Dozers
MICHIGAN CAT
Caterpillar D4CIIIXL, Construction
22,400 
Caterpillar D4CIIIXL, Construction
- Dozers
N C MACHINERY CO.
CATERPILLAR D4CIII 1997
 
CATERPILLAR D4CIII 1997
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4CIII 2000
 
CATERPILLAR D4CIII 2000
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.