AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

101-9616 CONDENSER GP-REFRIGERANT S/N 4LS1-UP; 6BS1-UP; 8CS1-UP PART OF 8Y-8185 CONDENSER & MTG GP-REFRIGERANT AN ATTACHMENT D4C III


OPERATOR STATION
AIR CONDITIONER GP
CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC
CONTROL GP-STEERING
PANEL GP
DOOR GP

TRACK-TYPE TRACTOR D4C III TRACK-TYPE TRACTOR 4LS
 D4C & D4C LGP, XL Series III Hystat Tractors 4LS00001-UP (MACHINE) POWERED BY 3046 Engine SEBP2687 D4C III 4LS   (1997)

OPERATOR STATION

AIR CONDITIONER GP
COMPRESSOR GP-REFRIGERANT
3E-1908 COMPRESSOR GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
8Y-8185 CONDENSER & MTG GP-REFRIGERANT
CONDENSER GP-REFRIGERANT
101-9616 CONDENSER GP-REFRIGERANT
383-3518 KIT-AIR CONDITIONER
LINES GP-AIR CONDITIONER
137-4141 LINES GP-AIR CONDITIONER
LINES GP-AIR CONDITIONER
137-4141 LINES GP-AIR CONDITIONER
 

#SEBP26870350
 

101-9616: CONDENSER GP-REFRIGERANT

101-9616 CONDENSER GP-REFRIGERANT
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 8Y-8185 CONDENSER & MTG GP-REFRIGERANT
AN ATTACHMENT
i00197935 SEBP2687
1019616 CONDENSER GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-7995 [2] FAN  
2. 3S-2093 [8] STRAP-CABLE  
3. 7T-5856 [4] CLAMP  
4. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
5. 8P-6363 [1] PLUG  
6. 9X-3452 [2] GUARD AS-FAN  
7. 115-1615 [2] RELAY AS (12-VOLT)  
8. 134-6059 [1] HARNESS AS (FAN)  
9. 142-3440 [2] PLATE-ORIFICE  
10. 174-1496 [2] MOTOR GP-ELECTRIC  
    (EACH INCLUDES)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 203-2070 [8] MOUNT (7/16 X 20 THD)  
12. 204-9530 [4] TUBE  
13. 204-9531 [1] COIL-CONDENSER  
14. 204-9532 [1] CASE AS  
  7T-1099 [4] LINK  
  8T-3490 M [12] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [12] NUT-WELD (M12X1.75-THD)  
  9G-9151 [2] CLIP  
15. 5C-2890 M [2] NUT (M6X1-THD)  
16. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
17. 5P-8441 [1] GROMMET  
18. 6D-4246 [2] CLIP (LOOP)  
19. 7X-0578 [4] WASHER-HARD (10.2X32X2.5-MM THK)  
20. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [4] NUT (M10X1.5-THD)  
22. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
23. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
24. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-6685 M [4] BOLT (M10X1.5X110-MM)  
27. 9X-7373 [1] GROMMET (23.81-MM THK)  
28. 5P-5924 D SEAL (0.2-M)  
29. 5P-2753 D SEAL (1.2-M)  
30. 5P-5908 D SEAL (1-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP26870351
 

165-4754: CONTROL GP-HANDLE

165-4754 CONTROL GP-HANDLE
S/N 4LS1-UP; 6BS453-UP; 8CS721-UP
PART OF 164-9438 VALVE GP-PILOT
i01075083 SEBP2687
1654754 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 151-9275 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE ASSEMBLY & WEDGE)
  3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 159-9853 [1] GROMMET  
4. 162-2302 [1] KIT-CAP  
 

#SEBP26870352
 

117-7714: CONTROL GP-HYDRAULIC HAND

117-7714 CONTROL GP-HYDRAULIC HAND
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 115-1074 HYDRAULIC AR
Type 1
i00557696 SEBP2687
1177714 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1473 [1] HANDLE  
2. 7X-3374 [1] NUT-FULL (1/2-20-THD)  
3. 6S-7982 [1] SPACER  
4. 8Y-5155 [1] BOOT AS  
5. 4M-6425 [8] BOLT (5/16-18X1-IN)  
6. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
7. 8T-4896 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
9. 3W-1491 [1] SUPPORT  
10. 8G-1825 [3] ROD  
11. 3D-8752 [2] LOCKNUT (5/16-24-THD)  
12. 6V-1033 [2] END-BEARING ROD  
13. 8Y-6143 [1] ROD  
14. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
15. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
16. 8Y-5384 [1] BRACKET AS  
  1F-0750 [7] NUT-WELD (3/8-16-THD)  
17. 031-4155 [8] LOCKNUT (5/16-18-THD)  
18. 7X-3376 [10] NUT-FULL (5/16-24-THD)  
19. 7H-3641 [8] END-ROD (5/16-24-THD)  
20. 8Y-2986 [1] LEVER AS  
21. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
22. 4L-6454 [2] BOLT (3/8-16X1-IN)  
23. 8Y-5156 [1] LEVER  
24. 8Y-5150 [1] LEVER  
25. 3W-1492 [1] LEVER  
26. 8Y-5151 [1] YOKE  
27. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
28. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-0798 [10] BEARING-ROLLER  
30. 8T-0741 [10] SEAL-LIP TYPE  
31. 8Y-5158 [1] SHAFT  
32. 8Y-5157 [1] SHAFT  
33. 8Y-5153 [1] SHAFT AS  
34. 3W-1482 [1] SHAFT AS  
35. 1B-8704 [1] KEY-WOODRUFF  
36. 8G-4658 [1] ROD  
37. 7S-5757 [1] RING-RETAINING  
38. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
39. 6V-9528 [1] FILM-INSTRUCTION (BLADE LIFT, TILT, ANGLE)(BLADE LIFT, TILT, ANGLE)  
  M   METRIC PART
 

#SEBP26870353
 

117-7714: CONTROL GP-HYDRAULIC HAND

117-7714 CONTROL GP-HYDRAULIC HAND
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 115-1074 HYDRAULIC AR
Type 2
i01073777 SEBP2687
1177714 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1473 [1] HANDLE  
2. 7X-3374 [1] NUT-FULL (1/2-20-THD)  
3. 6S-7982 [1] SPACER  
4. 8Y-5155 [1] BOOT AS  
5. 4M-6425 [8] BOLT (5/16-18X1-IN)  
6. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
7. 8T-4896 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
9. 3W-1491 [1] SUPPORT  
10. 8G-1825 [2] ROD  
11. 3D-8752 [2] LOCKNUT (5/16-24-THD)  
12. 6V-1033 [2] END-BEARING ROD  
13. 8Y-6143 [1] ROD  
14. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
15. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
16. 8Y-5384 [1] BRACKET AS  
  1F-0750 [7] NUT-WELD (3/8-16-THD)  
17. 031-4155 [8] LOCKNUT (5/16-18-THD)  
18. 7X-3376 [10] NUT-FULL (5/16-24-THD)  
19. 7H-3641 [8] END-ROD (5/16-24-THD)  
20. 8Y-2986 [1] LEVER AS  
21. 7X-7729 C [2] WASHER (11X25X3-MM THK)  
22. 4L-6454 [2] BOLT (3/8-16X1-IN)  
23. 8Y-5156 [1] LEVER  
24. 8Y-5150 [1] LEVER  
25. 3W-1492 [1] LEVER  
26. 8Y-5151 [1] YOKE  
27. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
28. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-0798 [10] BEARING-ROLLER  
30. 8T-0741 [10] SEAL-LIP TYPE  
31. 8Y-5158 [1] SHAFT  
32. 8Y-5157 [1] SHAFT  
33. 8Y-5153 [1] SHAFT AS  
34. 3W-1482 [1] SHAFT AS  
35. 1B-8704 [1] KEY-WOODRUFF  
36. 8G-4658 [1] ROD  
37. 7S-5757 [1] RING-RETAINING  
38. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
39. 6V-9528 [1] FILM-INSTRUCTION (BLADE LIFT, TILT, ANGLE)(BLADE LIFT, TILT, ANGLE)  
40. 2M-2292 C [1] ROD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP26870354
 

8Y-7111: CONTROL GP-HYDRAULIC HAND

8Y-7111 CONTROL GP-HYDRAULIC HAND
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
RIPPER
PART OF 8Y-7126 HYDRAULIC AR
AN ATTACHMENT
i00197175 SEBP2687
8Y7111 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-4084 [1] FILM-INSTRUCTION (RIPPER LIFT, LOWER)  
2. 8Y-7112 [1] LEVER AS  
  1B-6182 [1] SPACER (13.11X19.05X1.18-MM THK)  
3. 4L-6454 [3] BOLT (3/8-16X1-IN)  
  5P-1075 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 3B-4610 [1] PIN-COTTER  
5. 3D-9609 [1] ROD END  
6. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
7. 3D-8752 [2] LOCKNUT (5/16-24-THD)  
8. 9K-8757 [1] ROD END  
9. 8Y-0559 [1] ROD  
10. 8Y-7113 [1] LEVER AS  
11. 4H-1641 [1] PIN-SPRING  
12. 8K-1255 [1] PIN  
13. 0L-1170 [1] HANDLE-LEVER  
 

#SEBP26870355
 

168-7959: CONTROL GP-STEERING

168-7959 CONTROL GP-STEERING
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 168-7958, 170-5136 MODIFICATION AR-JOYSTICK
i01076652 SEBP2687
1687959 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-7819 [1] RING-RETAINING  
2. 3S-2093 [1] STRAP-CABLE  
3. 6K-0806 [1] STRAP-CABLE  
4. 7S-5757 [1] RING-RETAINING  
5. 8C-3111 [2] ROD END  
6. 009-8670 [6] WASHER (SPRING)  
7. 161-0023 [1] BRACKET AS  
  6D-3787 [1] BEARING-ROLLER  
  7T-1099 [1] LINK  
8. 161-0532 [1] PLATE  
9. 161-0747 [1] PLATE AS  
10. 161-3986 [1] LEVER AS  
  9S-6465 [1] BEARING-ROLLER  
11. 161-4419 [1] LEVER AS  
12. 161-5659 [1] LEVER AS  
  8T-1177 [1] BEARING-ROLLER  
13. 161-6181 [1] YOKE AS  
14. [2] LEVER  
15. [1] ROD  
16. 161-6629 [1] PIN  
17. 163-3902 [1] BRACKET AS  
18. 163-3906 [1] SHAFT  
19. 163-3908 [1] CLEVIS  
20. 163-3910 [1] ROD  
21. 163-4579 [2] SPACER (11-MM THK)  
22. 163-5503 [1] COLLAR  
23. 163-5504 [2] DISC  
24. 164-3879 [1] PLATE  
25. 164-3880 [1] SEAL (9.6-MM ID)  
26. 164-3942 [2] SPACER (6-MM THK)  
27. 164-9438 Y [1] VALVE GP-PILOT  
28. 165-8409 [2] ROD END  
29. 166-2334 [1] BOOT-DUST  
30. [1] ROD  
31. 1B-8702 [1] KEY-WOODRUFF  
32. 2J-6356 [2] RING-RETAINING  
33. 3B-4607 [1] PIN-COTTER  
34. 3J-1907 [1] SEAL-O-RING  
35. 4B-2913 [1] PIN-CLEVIS  
36. 1F-6887 [2] BEARING  
37. 5C-2890 M [5] NUT (M6X1-THD)  
38. 5M-8500 [1] KNOB  
39. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
40. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
41. 7X-0594 [3] WASHER-HARD (20X38X3-MM THK)  
42. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
43. 7X-7729 [2] WASHER (11X25X3-MM THK)  
44. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
45. 8T-0269 M [4] BOLT-SOCKET HEAD (M6X1X20-MM)  
46. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
47. 8T-4133 M [4] NUT (M10X1.5-THD)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
50. 8T-4138 M [2] BOLT (M6X1X20-MM)  
51. 7X-0554 [1] WASHER-HARD (13.5X32X5-MM THK)  
52. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
53. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
54. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
55. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
56. 9S-4191 [1] PLUG (9/16-18-THD)  
57. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26870356
 

115-1126: DASH GP

115-1126 DASH GP
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
TRACK TYPE TRACTOR
PART OF 115-1099, 115-1100, 137-7458 CHASSIS AR
i00489981 SEBP2687
1151126 DASH GP Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2041 M [4] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
2. 117-8290 [1] FILM-TOP  
3. 117-8291 [1] FILM-PANEL  
4. 117-8292 [2] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
5. 119-0785 [1] PANEL AS  
  5D-9629 [7] ROD  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
6. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
  M   METRIC PART
 

#SEBP26870357
 

119-5694: DASH GP

119-5694 DASH GP
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 119-5688 CAB GP
AN ATTACHMENT
i00521507 SEBP2687
1195694 DASH GP Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-5451 [1] DASH AS  
2. 149-2639 [1] LINER  
3. 7Y-3281 [3] GROMMET  
4. 149-2637 [1] LINER  
5. 149-2636 [1] LINER  
6. 149-2635 [1] LINER  
7. 149-2638 [1] LINER  
8. 5P-5755 D SEAL (.6M)  
  D   ORDER BY THE METER
 

#SEBP26870358
 

124-4246: DOOR GP-CAB

124-4246 DOOR GP-CAB
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 119-5688 CAB GP
AN ATTACHMENT
i00198063 SEBP2687
1244246 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6647 E SEAL (420-CM)  
2. 5P-5768 D SEAL (3.8-M)  
3. 126-8510 [1] LOCK AS-CYLINDER  
4. 6V-2375 [1] HANDLE AS-INSIDE  
5. 8Y-4802 [1] HANDLE AS (OUTSIDE)  
6. 9X-2328 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
7. 126-8511 [1] LATCH AS-ROTARY  
8. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
9. 8T-4138 M [4] BOLT (M6X1X20-MM)  
10. 7X-2393 [1] BUMPER-CONICAL  
11. 124-4319 [1] COVER  
12. 102-5800 [1] GLASS  
13. 5C-7261 M [1] NUT (M8X1.25-THD)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP26870359
 

164-0805: DOOR GP-CAB

164-0805 DOOR GP-CAB
S/N 4LS1-UP; 6BS1-UP; 8CS1-UP
PART OF 119-5688 CAB GP
AN ATTACHMENT
i01100403 SEBP2687
1640805 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D4C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6647 E SEAL (420CM)  
2. 5P-5768 BD SEAL (4M)  
3. 126-8510 [1] LOCK AS-CYLINDER  
  7F-9223 [1] LOCKWASHER  
  8T-5004 [1] SCREW-MACHINE (1/4-28X0.375-IN)  
4. 6V-2375 [1] HANDLE AS-INSIDE  
5. 8Y-4802 [1] HANDLE AS  
  [1] HANDLE-OUTSIDE  
6. 9X-2328 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
7. 126-8511 [1] LATCH AS-ROTARY  
8. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
9. 8T-4138 M [4] BOLT (M6X1X20-MM)  
10. 7X-2393 [1] BUMPER-CONICAL  
11. 124-4319 [1] COVER  
12. 164-0801 [1] GLASS  
13. [1] DOOR AS  
14. 5C-7261 M [1] NUT (M8X1.25-THD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D4C III :

CONDENSER & MTG GP-REFRIGERANT
8Y-8185 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1908 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
156-3557 COMPRESSOR GP-REFRIGERANT
COMPRESSOR & MTG GP-REFRIG
100-9961 COMPRESSOR & MTG GP-REFRIG
CAB GP
119-5688 CAB GP
CAB GP
119-5688 CAB GP
CAB GP
119-5688 CAB GP
BLOWER GP-CAB
138-4839 BLOWER GP-CAB
CONTROL GP-HANDLE
165-4754 CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC HAND
117-7714 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
117-7714 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
8Y-7111 CONTROL GP-HYDRAULIC HAND
CONTROL GP-STEERING
168-7959 CONTROL GP-STEERING
DASH GP
115-1126 DASH GP
DASH GP
119-5694 DASH GP
DOOR GP-CAB
124-4246 DOOR GP-CAB

Truck sale:

Caterpillar D4CIIILGP, Construction
22,500 
Caterpillar D4CIIILGP, Construction
- Dozers
MICHIGAN CAT
Caterpillar D4CIII, Construction
29,500 
Caterpillar D4CIII, Construction
- Dozers
MICHIGAN CAT
Caterpillar D4CIIIXL, Construction
22,400 
Caterpillar D4CIIIXL, Construction
- Dozers
N C MACHINERY CO.
CATERPILLAR D4CIII 1997
 
CATERPILLAR D4CIII 1997
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4CIII 2000
 
CATERPILLAR D4CIII 2000
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.