AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

117-7714 CONTROL GP-HYDRAULIC HAND S/N 5HS1-UP; 6CS1-UP; 7PS1-UP PART OF 115-1074 HYDRAULIC AR Type 1 D5C III


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-STEERING
PANEL GP
DOOR GP
SEAT GP

TRACK-TYPE TRACTOR D5C III TRACK-TYPE TRACTOR 5HS
 D5C & D5C LGP, XL Series III Hystat Tractors 5HS00001-UP (MACHINE) POWERED BY 3046 Engine SEBP2688 D5C III 5HS   (1997)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
117-7714 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
117-7714 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
8Y-7111 CONTROL GP-HYDRAULIC HAND
 

#SEBP26880360
 

117-7714: CONTROL GP-HYDRAULIC HAND

117-7714 CONTROL GP-HYDRAULIC HAND
S/N 5HS1-UP; 6CS1-UP; 7PS1-UP
PART OF 115-1074 HYDRAULIC AR
Type 1
i00557696 SEBP2688
1177714 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1473 [1] HANDLE  
2. 7X-3374 [1] NUT-FULL (1/2-20-THD)  
3. 6S-7982 [1] SPACER  
4. 8Y-5155 [1] BOOT AS  
5. 4M-6425 [8] BOLT (5/16-18X1-IN)  
6. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
7. 8T-4896 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
9. 3W-1491 [1] SUPPORT  
10. 8G-1825 [3] ROD  
11. 3D-8752 [2] LOCKNUT (5/16-24-THD)  
12. 6V-1033 [2] END-BEARING ROD  
13. 8Y-6143 [1] ROD  
14. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
15. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
16. 8Y-5384 [1] BRACKET AS  
  1F-0750 [7] NUT-WELD (3/8-16-THD)  
17. 031-4155 [8] LOCKNUT (5/16-18-THD)  
18. 7X-3376 [10] NUT-FULL (5/16-24-THD)  
19. 7H-3641 [8] END-ROD (5/16-24-THD)  
20. 8Y-2986 [1] LEVER AS  
21. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
22. 4L-6454 [2] BOLT (3/8-16X1-IN)  
23. 8Y-5156 [1] LEVER  
24. 8Y-5150 [1] LEVER  
25. 3W-1492 [1] LEVER  
26. 8Y-5151 [1] YOKE  
27. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
28. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-0798 [10] BEARING-ROLLER  
30. 8T-0741 [10] SEAL-LIP TYPE  
31. 8Y-5158 [1] SHAFT  
32. 8Y-5157 [1] SHAFT  
33. 8Y-5153 [1] SHAFT AS  
34. 3W-1482 [1] SHAFT AS  
35. 1B-8704 [1] KEY-WOODRUFF  
36. 8G-4658 [1] ROD  
37. 7S-5757 [1] RING-RETAINING  
38. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
39. 6V-9528 [1] FILM-INSTRUCTION (BLADE LIFT, TILT, ANGLE)(BLADE LIFT, TILT, ANGLE)  
  M   METRIC PART
 

#SEBP26880361
 

117-7714: CONTROL GP-HYDRAULIC HAND

117-7714 CONTROL GP-HYDRAULIC HAND
S/N 5HS1-UP; 6CS1-UP; 7PS1-UP
PART OF 115-1074 HYDRAULIC AR
Type 2
i01073777 SEBP2688
1177714 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1473 [1] HANDLE  
2. 7X-3374 [1] NUT-FULL (1/2-20-THD)  
3. 6S-7982 [1] SPACER  
4. 8Y-5155 [1] BOOT AS  
5. 4M-6425 [8] BOLT (5/16-18X1-IN)  
6. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
7. 8T-4896 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
9. 3W-1491 [1] SUPPORT  
10. 8G-1825 [2] ROD  
11. 3D-8752 [2] LOCKNUT (5/16-24-THD)  
12. 6V-1033 [2] END-BEARING ROD  
13. 8Y-6143 [1] ROD  
14. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
15. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
16. 8Y-5384 [1] BRACKET AS  
  1F-0750 [7] NUT-WELD (3/8-16-THD)  
17. 031-4155 [8] LOCKNUT (5/16-18-THD)  
18. 7X-3376 [10] NUT-FULL (5/16-24-THD)  
19. 7H-3641 [8] END-ROD (5/16-24-THD)  
20. 8Y-2986 [1] LEVER AS  
21. 7X-7729 C [2] WASHER (11X25X3-MM THK)  
22. 4L-6454 [2] BOLT (3/8-16X1-IN)  
23. 8Y-5156 [1] LEVER  
24. 8Y-5150 [1] LEVER  
25. 3W-1492 [1] LEVER  
26. 8Y-5151 [1] YOKE  
27. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
28. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-0798 [10] BEARING-ROLLER  
30. 8T-0741 [10] SEAL-LIP TYPE  
31. 8Y-5158 [1] SHAFT  
32. 8Y-5157 [1] SHAFT  
33. 8Y-5153 [1] SHAFT AS  
34. 3W-1482 [1] SHAFT AS  
35. 1B-8704 [1] KEY-WOODRUFF  
36. 8G-4658 [1] ROD  
37. 7S-5757 [1] RING-RETAINING  
38. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
39. 6V-9528 [1] FILM-INSTRUCTION (BLADE LIFT, TILT, ANGLE)(BLADE LIFT, TILT, ANGLE)  
40. 2M-2292 C [1] ROD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP26880362
 

8Y-7111: CONTROL GP-HYDRAULIC HAND

8Y-7111 CONTROL GP-HYDRAULIC HAND
S/N 5HS1-UP; 6CS1-UP; 7PS1-UP
RIPPER
PART OF 8Y-7126 HYDRAULIC AR
AN ATTACHMENT
i00197175 SEBP2688
8Y7111 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-4084 [1] FILM-INSTRUCTION (RIPPER LIFT, LOWER)  
2. 8Y-7112 [1] LEVER AS  
  1B-6182 [1] SPACER (13.11X19.05X1.18-MM THK)  
3. 4L-6454 [3] BOLT (3/8-16X1-IN)  
  5P-1075 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 3B-4610 [1] PIN-COTTER  
5. 3D-9609 [1] ROD END  
6. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
7. 3D-8752 [2] LOCKNUT (5/16-24-THD)  
8. 9K-8757 [1] ROD END  
9. 8Y-0559 [1] ROD  
10. 8Y-7113 [1] LEVER AS  
11. 4H-1641 [1] PIN-SPRING  
12. 8K-1255 [1] PIN  
13. 0L-1170 [1] HANDLE-LEVER  
 

#SEBP26880363
 

168-7959: CONTROL GP-STEERING

168-7959 CONTROL GP-STEERING
S/N 5HS1-UP; 6CS1-UP; 7PS1-UP
PART OF 168-7958, 170-5136 MODIFICATION AR-JOYSTICK
i01076652 SEBP2688
1687959 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-7819 [1] RING-RETAINING  
2. 3S-2093 [1] STRAP-CABLE  
3. 6K-0806 [1] STRAP-CABLE  
4. 7S-5757 [1] RING-RETAINING  
5. 8C-3111 [2] ROD END  
6. 009-8670 [6] WASHER (SPRING)  
7. 161-0023 [1] BRACKET AS  
  6D-3787 [1] BEARING-ROLLER  
  7T-1099 [1] LINK  
8. 161-0532 [1] PLATE  
9. 161-0747 [1] PLATE AS  
10. 161-3986 [1] LEVER AS  
  9S-6465 [1] BEARING-ROLLER  
11. 161-4419 [1] LEVER AS  
12. 161-5659 [1] LEVER AS  
  8T-1177 [1] BEARING-ROLLER  
13. 161-6181 [1] YOKE AS  
14. [2] LEVER  
15. [1] ROD  
16. 161-6629 [1] PIN  
17. 163-3902 [1] BRACKET AS  
18. 163-3906 [1] SHAFT  
19. 163-3908 [1] CLEVIS  
20. 163-3910 [1] ROD  
21. 163-4579 [2] SPACER (11-MM THK)  
22. 163-5503 [1] COLLAR  
23. 163-5504 [2] DISC  
24. 164-3879 [1] PLATE  
25. 164-3880 [1] SEAL (9.6-MM ID)  
26. 164-3942 [2] SPACER (6-MM THK)  
27. 164-9438 Y [1] VALVE GP-PILOT  
28. 165-8409 [2] ROD END  
29. 166-2334 [1] BOOT-DUST  
30. [1] ROD  
31. 1B-8702 [1] KEY-WOODRUFF  
32. 2J-6356 [2] RING-RETAINING  
33. 3B-4607 [1] PIN-COTTER  
34. 3J-1907 [1] SEAL-O-RING  
35. 4B-2913 [1] PIN-CLEVIS  
36. 1F-6887 [2] BEARING  
37. 5C-2890 M [5] NUT (M6X1-THD)  
38. 5M-8500 [1] KNOB  
39. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
40. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
41. 7X-0594 [3] WASHER-HARD (20X38X3-MM THK)  
42. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
43. 7X-7729 [2] WASHER (11X25X3-MM THK)  
44. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
45. 8T-0269 M [4] BOLT-SOCKET HEAD (M6X1X20-MM)  
46. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
47. 8T-4133 M [4] NUT (M10X1.5-THD)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
50. 8T-4138 M [2] BOLT (M6X1X20-MM)  
51. 7X-0554 [1] WASHER-HARD (13.5X32X5-MM THK)  
52. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
53. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
54. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
55. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
56. 9S-4191 [1] PLUG (9/16-18-THD)  
57. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26880364
 

115-1126: DASH GP

115-1126 DASH GP
S/N 5HS1-UP; 6CS1-UP; 7PS1-UP
TRACK TYPE TRACTOR
PART OF 115-1101, 115-1102, 137-7459 CHASSIS AR
i00489981 SEBP2688
1151126 DASH GP Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2041 M [4] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
2. 117-8290 [1] FILM-TOP  
3. 117-8291 [1] FILM-PANEL  
4. 117-8292 [2] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
5. 119-0785 [1] PANEL AS  
  5D-9629 [7] ROD  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
6. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
  M   METRIC PART
 

#SEBP26880365
 

119-5694: DASH GP

119-5694 DASH GP
S/N 5HS1-UP; 6CS1-UP; 7PS1-UP
PART OF 119-5688 CAB GP
AN ATTACHMENT
i00521507 SEBP2688
1195694 DASH GP Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-5451 [1] DASH AS  
2. 149-2639 [1] LINER  
3. 7Y-3281 [3] GROMMET  
4. 149-2637 [1] LINER  
5. 149-2636 [1] LINER  
6. 149-2635 [1] LINER  
7. 149-2638 [1] LINER  
8. 5P-5755 D SEAL (.6M)  
  D   ORDER BY THE METER
 

#SEBP26880366
 

124-4246: DOOR GP-CAB

124-4246 DOOR GP-CAB
S/N 5HS1-UP; 6CS1-UP; 7PS1-UP
PART OF 119-5688 CAB GP
AN ATTACHMENT
i00198063 SEBP2688
1244246 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6647 E SEAL (420-CM)  
2. 5P-5768 D SEAL (3.8-M)  
3. 126-8510 [1] LOCK AS-CYLINDER  
4. 6V-2375 [1] HANDLE AS-INSIDE  
5. 8Y-4802 [1] HANDLE AS (OUTSIDE)  
6. 9X-2328 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
7. 126-8511 [1] LATCH AS-ROTARY  
8. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
9. 8T-4138 M [4] BOLT (M6X1X20-MM)  
10. 7X-2393 [1] BUMPER-CONICAL  
11. 124-4319 [1] COVER  
12. 102-5800 [1] GLASS  
13. 5C-7261 M [1] NUT (M8X1.25-THD)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP26880367
 

164-0805: DOOR GP-CAB

164-0805 DOOR GP-CAB
S/N 5HS1-UP; 6CS1-UP; 7PS1-UP
PART OF 119-5688 CAB GP
AN ATTACHMENT
i01100403 SEBP2688
1640805 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6647 E SEAL (420CM)  
2. 5P-5768 BD SEAL (4M)  
3. 126-8510 [1] LOCK AS-CYLINDER  
  7F-9223 [1] LOCKWASHER  
  8T-5004 [1] SCREW-MACHINE (1/4-28X0.375-IN)  
4. 6V-2375 [1] HANDLE AS-INSIDE  
5. 8Y-4802 [1] HANDLE AS  
  [1] HANDLE-OUTSIDE  
6. 9X-2328 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
7. 126-8511 [1] LATCH AS-ROTARY  
8. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
9. 8T-4138 M [4] BOLT (M6X1X20-MM)  
10. 7X-2393 [1] BUMPER-CONICAL  
11. 124-4319 [1] COVER  
12. 164-0801 [1] GLASS  
13. [1] DOOR AS  
14. 5C-7261 M [1] NUT (M8X1.25-THD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP26880368
 

8Y-5874: EXTENSION GP-BACKREST

8Y-5874 EXTENSION GP-BACKREST -CLOTH
S/N 5HS1-UP; 6CS1-UP; 7PS1-UP
PART OF 8Y-6138 SEAT GP-SUSPENSION
AN ATTACHMENT
i00092170 SEBP2688
8Y5874 EXTENSION GP-BACKREST Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-5877 [1] PAN AS-EXTENSION  
2. 8Y-5947 J [2] FASTENER  
3. JZ [1] CUSHION AS  
   
    AVAILABLE REPAIR KIT(S):
  8Y-5943 J [1] KIT-CUSHION (BACKREST EXTENSION)  
    (INCLUDES CUSHION AS & FASTENER)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Z   NOT SERVICED SEPARATELY
 

#SEBP26880369
 

8Y-5959: EXTENSION GP-BACKREST

8Y-5959 EXTENSION GP-BACKREST -VINYL
S/N 5HS1-UP; 6CS1-UP; 7PS1-UP
PART OF 8Y-6179 SEAT GP-SUSPENSION
AN ATTACHMENT
i00122846 SEBP2688
8Y5959 EXTENSION GP-BACKREST Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-5877 [1] PAN AS-EXTENSION  
2. 8Y-5947 J [2] FASTENER  
3. JZ [1] CUSHION AS  
   
    AVAILABLE REPAIR KIT(S):
  8Y-5960 J [1] KIT-CUSHION (VINYL BACK REST)  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  Z   NOT SERVICED SEPARATELY
 

Information:

Caterpillar Parts SIS Catalog D5C III :

CONTROL GP-HANDLE
165-4754 CONTROL GP-HANDLE
CONDENSER GP-REFRIGERANT
101-9616 CONDENSER GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
8Y-8185 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1908 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
156-3557 COMPRESSOR GP-REFRIGERANT
COMPRESSOR & MTG GP-REFRIG
100-9961 COMPRESSOR & MTG GP-REFRIG
CAB GP
119-5688 CAB GP
CAB GP
119-5688 CAB GP
CONTROL GP-HYDRAULIC HAND
117-7714 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
8Y-7111 CONTROL GP-HYDRAULIC HAND
CONTROL GP-STEERING
168-7959 CONTROL GP-STEERING
DASH GP
115-1126 DASH GP
DASH GP
119-5694 DASH GP
DOOR GP-CAB
124-4246 DOOR GP-CAB
DOOR GP-CAB
164-0805 DOOR GP-CAB
EXTENSION GP-BACKREST
8Y-5874 EXTENSION GP-BACKREST

Truck sale:

Caterpillar D5CIIIXL, Construction
36,500 
Caterpillar D5CIIIXL, Construction
- Dozers
CARTER MACHINERY COMPANY, INC.
Caterpillar D5CIIIXL, Construction
28,000 
Caterpillar D5CIIIXL, Construction
- Dozers
FOLEY, INC.
Caterpillar D5CIIIXL, Construction
30,000 
Caterpillar D5CIIIXL, Construction
- Dozers
WHAYNE SUPPLY COMPANY
CATERPILLAR D5CIII 1994
 
CATERPILLAR D5CIII 1994
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CATERPILLAR D5CIII 1994
 
CATERPILLAR D5CIII 1994
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.