BASIC ENGINE
HOUSING GP-FRONTVALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP
BASIC ENGINE
HOUSING GP-FRONT
#SEBP26890660
118-1727: COVER GP-FRONT HOUSING
118-1727 COVER GP-FRONT HOUSING -ACCESSORY DRIVE
S/N 1WM22666-26507
REQUIRED ON ENGINES WITHOUT FACTORY INSTALLED AIR COMPRESSOR
FOR USE WITH @@@@@116-4550@@@@@
ALSO AN ATTACHMENT
S/N 1WM22666-26507
REQUIRED ON ENGINES WITHOUT FACTORY INSTALLED AIR COMPRESSOR
FOR USE WITH @@@@@116-4550@@@@@
ALSO AN ATTACHMENT
For full view, you need register
#SEBP26890661
7L-0004: COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
S/N 1WM1-230
S/N 1WM1-230
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-0100 M | [2] | BOLT (M8X1.25X60-MM) | |
| 2. | 106-7920 | [1] | COVER AS-FRONT | |
| 3. | 6V-2317 M | [10] | BOLT (M8X1.25X30-MM) | |
| 4. | 135-9819 | [1] | SEAL-INTEGRAL | |
| 5. | 6V-8336 M | [2] | BOLT (M12X1.75X70-MM) | |
| 6. | 6V-8149 M | [2] | NUT (M12X1.75-THD) | |
| 7. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 7W-6552 | [1] | GASKET | |
| 9. | 4W-2026 | [1] | COVER | |
| 10. | 6V-2317 M | [2] | BOLT (M8X1.25X30-MM)(LOCATION A) | |
| 11. | 1U-8846 B | SEALANT-GASKET | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP26890662
7W-9847: COVER GP-FRONT HOUSING
7W-9847 COVER GP-FRONT HOUSING
S/N 1WM1-929
S/N 1WM1-929
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26890663
100-4943: COVER GP-VALVE MECHANISM
100-4943 COVER GP-VALVE MECHANISM
S/N 1WM1-26507
PROVIDES CLEARANCE FOR HEUI VALVE MECHANISM AND THREE BOSSES FOR MOUNTING EXTERNAL HARDWARE
ALSO AN ATTACHMENT
S/N 1WM1-26507
PROVIDES CLEARANCE FOR HEUI VALVE MECHANISM AND THREE BOSSES FOR MOUNTING EXTERNAL HARDWARE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26890664
115-4187: COVER GP-VALVE MECHANISM
115-4187 COVER GP-VALVE MECHANISM
S/N 1WM1-230
S/N 1WM1-230
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26890665
120-9300: COVER GP-VALVE MECHANISM
120-9300 COVER GP-VALVE MECHANISM
S/N 1WM5189-26507
FOR USE WITH TOP FRONT OIL FILL
ALSO AN ATTACHMENT
S/N 1WM5189-26507
FOR USE WITH TOP FRONT OIL FILL
ALSO AN ATTACHMENT
For full view, you need register
#SEBP26890666
126-1513: COVER GP-VALVE MECHANISM
126-1513 COVER GP-VALVE MECHANISM
S/N 1WM6802-26507
FOR USE WITH TOP REAR OIL FILL
ALSO AN ATTACHMENT
S/N 1WM6802-26507
FOR USE WITH TOP REAR OIL FILL
ALSO AN ATTACHMENT
For full view, you need register
#SEBP26890667
113-6087: CRANKSHAFT GP
113-6087 CRANKSHAFT GP
S/N 1WM1-26507
S/N 1WM1-26507
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 489-2731 | [1] | CRANKSHAFT AS | |
| 1A. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 1B. | 2W-8147 | [1] | GEAR (50-TEETH) | |
| 2. | 212-4893 | [1] | BEARING-THRUST (STANDARD) | |
| 229-5153 AB | BEARING-THRUST (0.25-MM US) | |||
| 229-5154 AB | BEARING-THRUST (0.5-MM US) | |||
| 229-5155 AB | BEARING-THRUST (0.5-MM OS) | |||
| 229-5156 AB | BEARING-THRUST (0.5-MM OS, 0.5-MM US) | |||
| 3. | 107-7708 | [6] | BEARING-MAIN (STANDARD) | |
| 145-0168 AB | BEARING-MAIN (0.5-MM OS) | |||
| 145-0170 AB | BEARING-MAIN (0.5-MM OS, 0.5-MM US) | |||
| 145-0162 AB | BEARING-MAIN (0.25-MM US) | |||
| 145-0164 AB | BEARING-MAIN (0.5-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP26890668
151-6301: CRANKSHAFT GP
151-6301 CRANKSHAFT GP
S/N 1WM20817-25593
S/N 1WM20817-25593
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 259-3246 | [1] | CRANKSHAFT AS | |
| 1A. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 1B. | 2W-8147 | [1] | GEAR (50-TEETH) | |
| 2. | 212-4893 | [1] | BEARING-THRUST | |
| 229-5153 AB | BEARING-THRUST (0.25-MM US) | |||
| 229-5154 AB | BEARING-THRUST (0.5-MM US) | |||
| 229-5155 AB | BEARING-THRUST (0.5-MM OS) | |||
| 229-5156 AB | BEARING-THRUST (0.5-MM OS, 0.5-MM US) | |||
| 3. | 107-7708 | [6] | BEARING-MAIN (STANDARD) | |
| 145-0162 AB | BEARING-MAIN (0.25-MM US) | |||
| 145-0164 AB | BEARING-MAIN (0.5-MM US) | |||
| 145-0168 AB | BEARING-MAIN (0.5-MM OS) | |||
| 145-0170 AB | BEARING-MAIN (0.5-MM OS, 0.5-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP26890669
105-1735: CYLINDER BLOCK AS
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SISInformation:
BASIC ENGINE
HOUSING GP-FRONT
Service Letter-NACD
Product Support Program For Replacing The Compressor Mounting Bracket On Certain 3126 Freightliner Truck Engines
Product Support Program For Replacing The Compressor Mounting Bracket On Certain 3126 Freightliner Truck Engines
Product Support Program For Replacing The Compressor Mounting Bracket On Certain 3126 Freightliner Truck Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Service Letter-China
Product Support Program For Replacing The Compressor Mounting Bracket On Certain 3126 Freightliner Truck Engines
Product Support Program For Replacing The Compressor Mounting Bracket On Certain 3126 Freightliner Truck Engines
Product Support Program For Replacing The Compressor Mounting Bracket On Certain 3126 Freightliner Truck Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Caterpillar Parts SIS Catalog 3126 :
Truck sale:
On Request
