BASIC ENGINE
DRIVE GP-FANPULLEY GP
BASIC ENGINE
DRIVE GP-FAN
#SEBP26890780
142-8575: PULLEY GP-FAN & ALT DRIVE
142-8575 PULLEY GP-FAN & ALT DRIVE
S/N 1WM1-26507
1.15:1 DRIVE RATIO
FOR USE WITH 50.8 MM (2 IN) PILOT AND 6 M8X1.25 HOLES ON 3.5 INCH BOLT CIRCLE
S/N 1WM1-26507
1.15:1 DRIVE RATIO
FOR USE WITH 50.8 MM (2 IN) PILOT AND 6 M8X1.25 HOLES ON 3.5 INCH BOLT CIRCLE
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF)(FAN AND ALTERNATOR DRIVE) | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 125-3723 | [1] | PULLEY-FAN (8-GROOVE) | |
| 10. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 11. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 12. | 123-0856 | [1] | SHAFT-FAN | |
| M | METRIC PART | |||
#SEBP26890781
143-7020: PULLEY GP-FAN & ALT DRIVE
143-7020 PULLEY GP-FAN & ALT DRIVE
1.15:1 DRIVE RATIO, MULTI POSITION
FOR USE WITH 8 GROOVE FAN AND FAN CLUTCH AND MOUNTING
AN ATTACHMENT
1.15:1 DRIVE RATIO, MULTI POSITION
FOR USE WITH 8 GROOVE FAN AND FAN CLUTCH AND MOUNTING
AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 125-3723 | [1] | PULLEY-FAN (8-GROOVE) | |
| 10. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 11. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 12. | 128-2330 | [1] | SHAFT AS-FAN | |
| M | METRIC PART | |||
#SEBP26890782
143-4927: PULLEY GP-FAN DRIVE
143-4927 PULLEY GP-FAN DRIVE
S/N 1WM12818-26507
1.29:1 RATIO. PROVIDES A 8 GROOVE PULLEY WITH A SHORT SHAFT
ALSO AN ATTACHMENT
S/N 1WM12818-26507
1.29:1 RATIO. PROVIDES A 8 GROOVE PULLEY WITH A SHORT SHAFT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 120-6660 | [1] | PULLEY-FAN (8-GROOVE) | |
| 10. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 11. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 12. | 123-0856 | [1] | SHAFT-FAN | |
| M | METRIC PART | |||
#SEBP26890783
143-7018: PULLEY GP-FAN DRIVE
143-7018 PULLEY GP-FAN DRIVE
1:1 DRIVE RATIO
Type 1
FOR USE WITH @@@@@120-6661@@@@@, 50.8 MM PILOT
AN ATTACHMENT
1:1 DRIVE RATIO
Type 1
FOR USE WITH @@@@@120-6661@@@@@, 50.8 MM PILOT
AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF)(PULLEY GROUP-FAN DRIVE) | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 10. | 123-0856 | [1] | SHAFT-FAN | |
| 11. | 125-3722 | [1] | PULLEY-FAN | |
| 12. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| M | METRIC PART | |||
#SEBP26890784
143-7018: PULLEY GP-FAN DRIVE
143-7018 PULLEY GP-FAN DRIVE
1:1 DRIVE RATIO
Type 2
FOR USE WITH @@@@@120-6661@@@@@, 50.8 MM PILOT
AN ATTACHMENT
1:1 DRIVE RATIO
Type 2
FOR USE WITH @@@@@120-6661@@@@@, 50.8 MM PILOT
AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-7238 | [1] | PLATE (THRUST) | |
| 2. | 123-0856 | [1] | SHAFT-FAN | |
| 3. | 125-3722 | [1] | PULLEY-FAN (8-GROOVE) | |
| 4. | 200-2282 C | [1] | BEARING AS | |
| 5. | 226-7914 C | [1] | BRACKET (FAN BEARING) | |
| 6. | 228-5827 C | [1] | RETAINER-BEARING | |
| 7. | 6V-3940 M | [3] | BOLT (M8X1.25X25-MM) | |
| 8. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 9. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 10. | 9M-1974 C | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 6V-5217 M | [4] | BOLT (M8X1.25X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP26890785
143-7019: PULLEY GP-FAN DRIVE
143-7019 PULLEY GP-FAN DRIVE
1:1 DRIVE RATIO
Type 1
FOR USE WITH FAN & FAN CLUTCH WITH M30 X 2 LEFT HAND THREAD, 8 GROOVE K SECTION POLY-RIB BELT, MOUNTING GP-FAN DRIVE
AN ATTACHMENT
1:1 DRIVE RATIO
Type 1
FOR USE WITH FAN & FAN CLUTCH WITH M30 X 2 LEFT HAND THREAD, 8 GROOVE K SECTION POLY-RIB BELT, MOUNTING GP-FAN DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 10. | 128-2330 | [1] | SHAFT AS-FAN | |
| 10A. | 7E-8716 | [1] | CAP/PLUG-TAPERED | |
| 11. | 125-3722 | [1] | PULLEY-FAN | |
| 12. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| M | METRIC PART | |||
#SEBP26890786
143-7019: PULLEY GP-FAN DRIVE
143-7019 PULLEY GP-FAN DRIVE
1:1 DRIVE RATIO
Type 2
FOR USE WITH FAN & FAN CLUTCH WITH M30 X 2 LEFT HAND THREAD, 8 GROOVE K SECTION POLY-RIB BELT, MOUNTING GP-FAN DRIVE
AN ATTACHMENT
1:1 DRIVE RATIO
Type 2
FOR USE WITH FAN & FAN CLUTCH WITH M30 X 2 LEFT HAND THREAD, 8 GROOVE K SECTION POLY-RIB BELT, MOUNTING GP-FAN DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 111-7238 | [1] | PLATE (THRUST) | |
| 2. | 125-3722 | [1] | PULLEY-FAN | |
| 3. | 128-2330 | [1] | SHAFT AS-FAN | |
| 4. | 200-2282 C | [1] | BEARING AS | |
| 5. | 226-7914 C | [1] | BRACKET (FAN BEARING) | |
| 6. | 228-5827 C | [1] | RETAINER-BEARING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 9. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 10. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP26890787
143-7021: PULLEY GP-FAN DRIVE
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 100-4026 | [1] | RETAINER-BEARING | |
| 3. | 6I-9235 | [1] | BEARING AS-ROLLER | |
| 4. | 111-7238 | [1] | PLATE (THRUST) | |
| 5. | 6V-5219 M | [2] | BOLT (M8X1.25X40-MM) | |
| 6. | 5M-6509 | [1] | SEAL-O-RING | |
| 7. | 6V-3940 M | [7] | BOLT (M8X1.25X25-MM) | |
| 8. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 120-6660 | [1] | PULLEY-FAN | |
| 10. | 134-5690 | [1] | BRACKET-FAN BEARING | |
| 11. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 12. | 128-2330 | [1] | SHAFT AS-FAN | |
| M | METRIC PART | |||
#SEBP26890788
175-3223: PULLEY GP-IDLER
175-3223 PULLEY GP-IDLER
S/N 1WM5151-26507
PART OF 124-7786 BELT TENSIONER GP
CANNOT BE USED WITH CUSTOMER SUPPLIED REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT
S/N 1WM5151-26507
PART OF 124-7786 BELT TENSIONER GP
CANNOT BE USED WITH CUSTOMER SUPPLIED REFRIGERANT COMPRESSOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS#SEBP26890789
123-0858: PULLEY-ALTERNATOR
123-0858 PULLEY-ALTERNATOR
65-MM DIAMETER. 8 GROOVE
FOR USE WITH @@@@@143-7018@@@@@, @@@@@143-7019@@@@@, @@@@@121-9697@@@@@
CANNOT BE USED WITH @@@@@120-6657@@@@@, @@@@@117-3433@@@@@
AN ATTACHMENT
65-MM DIAMETER. 8 GROOVE
FOR USE WITH @@@@@143-7018@@@@@, @@@@@143-7019@@@@@, @@@@@121-9697@@@@@
CANNOT BE USED WITH @@@@@120-6657@@@@@, @@@@@117-3433@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3126 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
Information:
BASIC ENGINE
DRIVE GP-FAN
Specifications
Disassembly and Assembly
Caterpillar Parts SIS Catalog 3126 :
Truck sale:
On Request
