AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

104-3055 COUPLER GP-QUICK S/N 6GS1-UP PART OF 136-5529, 136-5599 HITCH AR 65E CHALLENGER


DRAWBAR, THREE POINT HITCH AND PTO
COUPLER GP-QUICK
DRAWBAR GP
DRIVE GP-POWER TAKE-OFF
FRAME AND BODY
DRAWBAR GP
DRAWBAR, THREE POINT HITCH AND PTO
HITCH AR
HITCH GP-3 POINT

CHALLENGER 65E CHALLENGER 6GS
 Challenger 65E Agricultural Tractor 6GS00001-UP (MACHINE) POWERED BY 3176C Engine SEBP2691 65E 6GS   (1997)

DRAWBAR, THREE POINT HITCH AND PTO

COUPLER GP-QUICK
COUPLER GP
146-4348 COUPLER GP
COUPLER GP-QUICK
104-3055 COUPLER GP-QUICK
 

#SEBP26910390
 

104-3055: COUPLER GP-QUICK

104-3055 COUPLER GP-QUICK
S/N 6GS1-UP
PART OF 136-5529, 136-5599 HITCH AR
i00472585 SEBP2691
1043055 COUPLER GP-QUICK Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3463 [1] FRAME AS-COUPLER  
2. 124-6644 [2] PLATE AS  
3. 104-3465 [2] PIN AS  
4. 133-4285 [1] PIN AS  
5. 104-3467 [2] LEVER AS  
6. 104-3471 [1] HOOK AS (CATEGORY III)  
7. 104-3472 [1] HOOK AS (CATEGORY IV)  
8. 133-4287 [2] ROD AS  
9. 107-0590 [1] SPACER (19.43X24.51X19.05-MM THK)  
10. 6J-0208 [2] SPRING  
11. 3J-2801 [4] BOLT-PLOW (1-8X2.5-IN)  
12. 5P-8250 [4] WASHER (28X49X5-MM THK)  
13. 6K-3632 [4] LOCKNUT (1-8-THD)  
14. 6J-3335 [2] PIN  
15. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 3B-4617 [4] PIN-COTTER  
17. 5P-8248 [5] WASHER-HARD (20X36.5X3.5-MM THK)  
18. 1A-8827 [2] PIN  
19. 1D-4615 [4] BOLT (3/4-10X5.5-IN)  
20. 0S-1626 [1] BOLT (3/4-10X1.5-IN)  
21. 7H-2069 [2] BOLT (3/4-10X1-IN)  
22. 104-3466 [2] BUSHING  
23. 1K-6870 [4] LOCKNUT (3/4-10-THD)  
24. 5P-6652 [2] WASHER (20X44.5X6-MM THK)  
 

#SEBP26910391
 

9U-1695: DRAWBAR GP-SWINGING

9U-1695 DRAWBAR GP-SWINGING
S/N 6GS1-UP
PART OF 136-5599 HITCH AR, 161-9151, 162-2130 HITCH READY AR, 136-5544 SPECIAL AR-WITHOUT HITCH
i00597415 SEBP2691
9U1695 DRAWBAR GP-SWINGING Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0347 [2] BOLT (5/8-11X2.25-IN)  
  3K-2889 [2] LOCKNUT (5/8-11-THD)  
2. 3F-3442 [1] DOWEL  
3. 3W-6116 [1] PIN  
4. 150-8766 C [2] LATCH  
5. 3B-2968 [4] BOLT (3/4-10X3.5-IN)  
6. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 119-6204 [1] PLATE  
8. 9U-3817 [1] PLATE-WEAR (BOTTOM DRAWBAR HAMMER STRAP)  
9. 125-6370 [1] DRAWBAR AS  
10. 135-4729 C [1] RETAINER AS  
11. 9B-7237 C [4] BOLT (3/8-16X1.25-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 135-4730 C [1] PIN (DRAWBAR)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP26910392
 

7T-3000: DRIVE GP-POWER TAKE-OFF

7T-3000 DRIVE GP-POWER TAKE-OFF
S/N 6GS1-UP; 4AY1-UP
PART OF 154-1972 KIT-POWER TAKE-OFF, 136-1053 TRANSMISSION AR
i00422065 SEBP2691
7T3000 DRIVE GP-POWER TAKE-OFF Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1558 [1] BOLT (1/2-20X3.25-IN)  
2. 1P-6563 [1] WASHER-RETAINING (0.531X2.559X0.48-IN THK)  
3. 7T-3063 [1] YOKE AS  
4. 3K-0196 [1] GUARD  
5. 1J-6472 [1] RING-RETAINING  
6. 1T-0043 [1] BALL BEARING  
7. 9H-6079 [1] SEAL-LIP TYPE  
8. 0S-1594 [7] BOLT (3/8-16X1-IN)  
9. 7T-3061 [1] HOUSING-CLUTCH  
10. 8M-4435 [1] SEAL-O-RING  
11. 2M-9780 [1] SEAL-O-RING  
12. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
13. 8P-4922 [3] RING-SEAL  
14. 7T-3058 [1] RING-SEAL  
15. 0S-1590 [2] BOLT (3/8-16X2-IN)  
16. 1T-0132 [1] SEAL-O-RING  
17. 5P-8191 C [3] RING-RETAINING  
18. 7T-3062 [1] MANIFOLD-CLUTCH  
19. 7T-3067 [1] RING-SEAL  
20. 6Y-7981 [8] DISC-FRICTION  
21. 7T-3057 [1] PISTON-CLUTCH  
22. 3P-1608 [1] RING-RETAINING  
23. 3P-0337 [6] PLATE-CLUTCH  
24. 3P-0335 [1] PLATE-CLUTCH PRESSURE  
25. 4M-9592 [10] SPRING  
26. 7T-3059 [1] HUB-CLUTCH  
27. 1T-0795 [1] RING-RETAINING  
28. 5D-1921 [1] RING-RETAINING  
29. 7T-3055 [1] SHAFT AS  
30. 3S-2938 [1] BUSHING  
31. 7T-3056 [1] HUB-CLUTCH  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP26910393
 

3W-5023: FRAME GP-DRAWBAR

3W-5023 FRAME GP-DRAWBAR
S/N 6GS1-UP
PART OF 136-5544 SPECIAL AR-WITHOUT HITCH
i00365855 SEBP2691
3W5023 FRAME GP-DRAWBAR Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-6125 [1] SUPPORT AS  
2. 8T-9400 C [12] BOLT (7/8-9X2.5-IN)  
3. 8C-6913 C [12] WASHER-HARD (24X41.5X4-MM THK)  
4. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
5. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 6K-1510 [2] STOP  
7. 125-5542 [1] PLATE-WEAR  
8. 4L-8183 [2] SPACER (0.656X1.125X0.38-IN THK)  
9. 7X-0515 [2] WASHER-HARD (17X35X5-MM THK)  
10. 8T-9393 [2] BOLT (5/8-11X1.5-IN)  
11. 6S-8224 [4] PLUG-PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP26910394
 

136-5529: HITCH AR

136-5529 HITCH AR
S/N 6GS1-UP
i00653889 SEBP2691
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  136-5521 Y [1] MOUNTING GP-CONTROL  
  104-3055 Y [1] COUPLER GP-QUICK  
  9T-9517 Y [2] CYLINDER GP-LIFT (HITCH)  
  113-7308 Y [1] HITCH GP-3 POINT  
  145-9564 Y [1] LINES GP-HYDRAULIC  
  136-5507 Y [1] SENSOR GP-SPEED  
  124-4803 Y [1] KIT-3 POINT HITCH VALVE  
   
  8C-4399 [1] FILM-WARNING (IMPROPERLY COUPLED IMPL)  
    (ON REAR SURFACE OF QUICK HITCH)
  8C-4977 [1] FILM-WARNING (HITCH CONT IN HOOK-UP MODE)  
    (ON INSIDE SURFACE OF OPERATOR COMPARTMENT DOOR)
   
  8T-6466 M [2] BOLT (M10X1.5X60-MM)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
    (FOR MOUNTING BANK VALVE TO ANGLE AS)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26910395
 

136-5599: HITCH AR

136-5599 HITCH AR
S/N 6GS1-UP
i01378707 SEBP2691
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  136-5577 Y [1] CAB GP  
  104-3055 Y [1] COUPLER GP-QUICK  
  9T-9517 Y [2] CYLINDER GP-LIFT (HITCH)  
  9U-1695 Y [1] DRAWBAR GP-SWINGING  
  136-6075 Y [1] GUARD GP-REAR  
  113-7308 Y [1] HITCH GP-3 POINT  
  152-5481 Y [1] LINES GP-HYDRAULIC  
    S/N 6GS1-327
  145-9544 Y [1] LINES GP-HYDRAULIC  
    S/N 6GS328-UP
  145-9564 Y [1] LINES GP-HYDRAULIC  
  136-5507 Y [1] SENSOR GP-SPEED  
  152-2138 Y [1] VALVE GP-BANK 5  
    S/N 6GS1-574
  173-6972 Y [1] VALVE GP-BANK 5  
    S/N 6GS575-UP
   
  8C-4399 [1] FILM-WARNING (IMPROPERLY COUPLED IMPL)  
    (ON REAR SURFACE OF QUICK HITCH)
  8C-4977 [1] FILM-WARNING (HITCH CONT IN HOOK-UP MODE)  
    (ON INSIDE SURFACE OF OPERATOR COMPARTMENT DOOR)
   
  8T-6466 M [2] BOLT (M10X1.5X60-MM)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
    (FOR MOUNTING BANK VALVE TO ANGLE AS)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26910396
 

198-6814: HITCH AR

198-6814 HITCH AR
S/N 6GS1-UP
i01437684 SEBP2691
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  188-8655 Y [1] GUARD GP-BELT  
   
  8T-9400 [16] BOLT (7/8-9X2.5-IN)  
  8C-6913 [16] WASHER-HARD (24X41.5X4-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26910397
 

113-7308: HITCH GP-3 POINT

113-7308 HITCH GP-3 POINT
S/N 6GS1-UP
PART OF 136-5529, 136-5599 HITCH AR
i00478827 SEBP2691
1137308 HITCH GP-3 POINT Parts scheme
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7235 [1] SUPPORT AS  
  7T-1099 [2] LINK  
2. 5P-2228 [6] BOLT (1/2-13X1-IN)  
3. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 5G-9977 [3] BAR  
5. 102-4634 [1] SHAFT AS-ROCKER ARM  
6. 6K-7983 [2] BUSHING  
7. 8F-9836 [1] BOSS (3/8-16-THD)  
8. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
9. 6L-1698 [2] SPACER (13.87X21.34X12.7-MM THK)  
10. 4E-5112 [2] PIN AS  
11. 4E-7872 Y [1] LINK GP (PITCH CONTROL)  
12. 7X-0341 [2] BOLT (1/2-13X7-IN)  
13. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
14. 1B-4287 [2] WASHER (14.3X58.7X5-MM THK)  
15. 4E-7866 Y [2] LINK GP (LIFT)  
16. 7X-0346 [8] BOLT (5/8-11X2-IN)  
17. 8T-4122 [28] WASHER-HARD (17X32X3.5-MM THK)  
18. 3W-7265 [2] BLOCK  
19. 3W-7218 [4] PLATE  
20. 8D-7424 [12] SPACER (48X81X6-MM THK)  
21. 8T-9393 [16] BOLT (5/8-11X1.5-IN)  
22. 3W-7266 [2] BLOCK  
23. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
24. 8C-6913 [16] WASHER-HARD (24X41.5X4-MM THK)  
25. 8C-6362 [4] BOLT (5/8-11X2.75-IN)  
26. 3W-7897 B [8] SPACER  
27. 8T-9400 [16] BOLT (7/8-9X2.5-IN)  
28. 4E-5114 [2] PIN  
29. 3W-7212 [2] BLOCK  
30. 3W-7255 [4] SPACER (47X80X10-MM THK)  
31. 3B-8491 [4] FITTING-GREASE (1/8-27 PTF)  
32. 4E-5110 [2] PIN AS  
33. 3W-7264 [2] PIN  
34. 7X-0537 [4] WASHER-HARD (40.5X67X6-MM THK)  
35. 3B-5324 [2] PIN-COTTER  
36. 8T-9383 [2] BOLT (1/2-13X0.75-IN)  
37. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
38. 5G-9975 [1] PIN  
39. 188-2757 [2] LINK AS-LOWER  
    (EACH INCLUDES)
40. 186-0974 [1] BALL JOINT AS  
41. 186-0975 [1] BALL JOINT AS  
42. 4L-8183 [2] SPACER (0.656X1.125X0.38-IN THK)  
43. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
44. 6K-1510 [2] STOP  
45. 7X-0515 [4] WASHER-HARD (17X35X5-MM THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
47. 125-5543 [1] PLATE-WEAR (DRAWBAR SUPPORT W/HITCH)  
48. 7X-0353 [2] BOLT (5/8-11X4.25-IN)  
49. 7X-0448 [2] NUT (5/8-11-THD)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP26910398
 

136-5590: HITCH READY AR

136-5590 HITCH READY AR
S/N 6GS1-UP
i01378653 SEBP2691
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  136-5410 Y [1] ADAPTER GP-3 POINT HITCH  
  136-5522 Y [1] CAB GP (WITHOUT HITCH)  
  136-6075 Y [1] GUARD GP-REAR  
  139-1261 Y [1] LINES GP-HYDRAULIC  
  152-2136 Y [1] VALVE GP-BANK 4  
  173-6969 Y [1] VALVE GP-BANK  
   
  8T-7008 [2] BOLT (3/8-16X3-IN)  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP26910399
 

150-4632: HITCH READY AR

150-4632 HITCH READY AR
S/N 6GS1-UP
i01299784 SEBP2691
  For full view, you need register

Parts for your 65E CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  132-4654 Y [1] BRACKET GP-SHIPPING  
  136-5410 Y [1] ADAPTER GP-3 POINT HITCH  
  136-5522 Y [1] CAB GP (WITHOUT HITCH)  
  136-6075 Y [1] GUARD GP-REAR  
  145-9544 Y [1] LINES GP-HYDRAULIC  
  152-2136 Y [1] VALVE GP-BANK 4  
    -OR-
  173-6969 Y [1] VALVE GP-BANK  
  8T-7008 [2] BOLT (3/8-16X3-IN)  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 65E :

COUPLER GP
146-4348 COUPLER GP
BRACKET GP-SHIPPING
132-4654 BRACKET GP-SHIPPING
113-7273 ADAPTER GP-POWER TAKE-OFF
136-5410 ADAPTER GP-3 POINT HITCH
VALVE GP-SOLENOID
100-3915 VALVE GP-SOLENOID
8J-6875 VALVE GP-SHUTTLE
VALVE GP-SHUTTLE
152-2646 VALVE GP-SHUTTLE
VALVE GP-RELIEF
9T-1819 VALVE GP-RELIEF
DRAWBAR GP-SWINGING
9U-1695 DRAWBAR GP-SWINGING
DRIVE GP-POWER TAKE-OFF
7T-3000 DRIVE GP-POWER TAKE-OFF
FRAME GP-DRAWBAR
3W-5023 FRAME GP-DRAWBAR
136-5529 HITCH AR
136-5599 HITCH AR
198-6814 HITCH AR
HITCH GP-3 POINT
113-7308 HITCH GP-3 POINT
136-5590 HITCH READY AR

Truck sale:

 
 
Caterpillar 65E
- tractors
ZIEGLER AG EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.