DRAWBAR, THREE POINT HITCH AND PTO
HITCH GP-3 POINTPOWER TAKE-OFF GP
HITCH GP-3 POINT
LINK GP
DRAWBAR, THREE POINT HITCH AND PTO
HITCH GP-3 POINT
#SEBP26910400
161-9151: HITCH READY AR
161-9151 HITCH READY AR
S/N 6GS1-UP
S/N 6GS1-UP
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 132-4654 Y | [1] | BRACKET GP-SHIPPING | ||
| 136-5577 Y | [1] | CAB GP | ||
| 9U-1695 Y | [1] | DRAWBAR GP-SWINGING | ||
| 136-6075 Y | [1] | GUARD GP-REAR | ||
| 139-1261 Y | [1] | LINES GP-HYDRAULIC | ||
| 161-9012 Y | [1] | LINES GP-HYDRAULIC | ||
| 136-5507 Y | [1] | SENSOR GP-SPEED | ||
| 152-2138 Y | [1] | VALVE GP-BANK 5 | ||
| S/N 6GS1-574 | ||||
| 173-6972 Y | [1] | VALVE GP-BANK 5 | ||
| S/N 6GS575-UP | ||||
| 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | ||
| 8C-4977 | [1] | FILM-WARNING (HITCH CONT IN HOOK-UP MODE) | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26910401
162-2130: HITCH READY AR
162-2130 HITCH READY AR
S/N 6GS1-UP
S/N 6GS1-UP
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 136-5410 Y | [1] | ADAPTER GP-3 POINT HITCH | ||
| 132-4654 Y | [1] | BRACKET GP-SHIPPING | ||
| 136-5522 Y | [1] | CAB GP (WITHOUT HITCH) | ||
| 9U-1695 Y | [1] | DRAWBAR GP-SWINGING | ||
| 136-6075 Y | [1] | GUARD GP-REAR | ||
| 139-1261 Y | [1] | LINES GP-HYDRAULIC | ||
| 152-2136 Y | [1] | VALVE GP-BANK 4 | ||
| 173-6969 Y | [1] | VALVE GP-BANK | ||
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8T-7008 | [2] | BOLT (3/8-16X3-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26910402
201-4894: HITCH READY AR
201-4894 HITCH READY AR
S/N 6GS1-UP
S/N 6GS1-UP
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 136-5410 Y | [1] | ADAPTER GP-3 POINT HITCH | ||
| 136-5522 Y | [1] | CAB GP (WITHOUT HITCH) | ||
| 136-6075 Y | [1] | GUARD GP-REAR | ||
| 145-9544 Y | [1] | LINES GP-HYDRAULIC | ||
| 173-6969 Y | [1] | VALVE GP-BANK | ||
| 8T-7008 | [2] | BOLT (3/8-16X3-IN) | ||
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26910403
204-8062: KIT-3 POINT HITCH
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 196-3017 | [2] | PIN AS | |
| 2. | 200-0010 | [2] | SPACER (17.5X25.4X12.5-MM THK) | |
| 3. | 204-8060 | [1] | PLATE | |
| 4. | 204-8061 | [1] | PLATE | |
| 5. | 204-8063 | [2] | PLATE | |
| 6. | 205-4644 | [1] | BRACKET AS | |
| 7. | 193-4472 Y | [1] | LINK GP-UPPER | |
| 8. | 210-7486 | [1] | PLATE AS | |
| 9. | 210-7487 | [1] | PLATE AS | |
| 10. | 3V-9244 | [2] | WASHER (16.5X50X5-MM THK) | |
| 11. | 7X-2553 M | [2] | BOLT (M16X2X40-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26910404
204-8062: KIT-3 POINT HITCH
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 196-3017 | [2] | PIN AS | |
| 2. | 200-0010 | [2] | SPACER (17.5X25.4X12.5-MM THK) | |
| 3. | 204-8060 | [1] | PLATE | |
| 4. | 204-8061 | [1] | PLATE | |
| 5. | 204-8063 | [2] | PLATE | |
| 6. | 205-4644 | [1] | BRACKET AS | |
| 7. | 210-7481 CY | [1] | LINK GP-UPPER | |
| 8. | 210-7486 | [1] | PLATE AS | |
| 9. | 210-7487 | [1] | PLATE AS | |
| 10. | 3V-9244 | [2] | WASHER (16.5X50X5-MM THK) | |
| 11. | 7X-2553 M | [2] | BOLT (M16X2X40-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26910405
124-4803: KIT-3 POINT HITCH VALVE
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9T-1799 Y | [1] | VALVE GP-CONTROL | ||
| 5B-9318 | [1] | BALL | ||
| 0S-1608 | [3] | BOLT (3/8-16X3.75-IN) | ||
| 3B-1915 | [1] | BOLT (3/8-16X1.375-IN) | ||
| 103-6097 | [1] | COVER | ||
| 105-1589 | [1] | MANIFOLD AS | ||
| 5B-9318 | [1] | BALL | ||
| 7J-0204 | [1] | SEAL-O-RING | ||
| 8T-2360 | [1] | SEAL-O-RING | ||
| 4T-4526 | [1] | SEAT | ||
| 2Y-5829 M | [1] | NUT (M10X1.5-THD) | ||
| 6J-3134 | [1] | SEAL-O-RING | ||
| 4D-9986 | [4] | SEAL-O-RING | ||
| 8T-2360 | [1] | SEAL-O-RING | ||
| 6V-5326 | [1] | SEAL-O-RING | ||
| 4J-5267 | [2] | SEAL-O-RING | ||
| 4J-5140 | [2] | SEAL-O-RING | ||
| 7J-0204 | [1] | SEAL-O-RING | ||
| 2K-8199 | [2] | SEAL-O-RING | ||
| 4T-4526 | [1] | SEAT | ||
| 4T-4517 | [3] | STUD | ||
| 6V-5839 | [3] | WASHER (11X21X2.5-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26910406
154-1972: KIT-POWER TAKE-OFF
154-1972 KIT-POWER TAKE-OFF
S/N 6GS1-UP
S/N 6GS1-UP
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 113-7270 Y | [1] | CONTROL GP-POWER TAKE-OFF | ||
| 7T-3000 Y | [1] | DRIVE GP-POWER TAKE-OFF | ||
| 149-1457 Y | [1] | LINES GP-POWER TAKE-OFF | ||
| 113-7271 Y | [1] | MOUNTING GP-POWER TAKE-OFF | ||
| 147-9435 Y | [1] | POWER TAKE-OFF GP | ||
| 3W-5101 Y | [1] | SHAFT GP-POWER TAKE-OFF | ||
| 9W-0664 Y | [1] | VALVE GP-MODULATING | ||
| 7X-0293 | [2] | BOLT (3/8-16X4.75-IN) | ||
| 147-7308 | [1] | FILM-INSTRUCTION | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP26910407
149-1457: LINES GP-POWER TAKE-OFF
149-1457 LINES GP-POWER TAKE-OFF
S/N 6GS1-UP
PART OF 154-1972 KIT-POWER TAKE-OFF, 139-8599 POWER TAKE-OFF AR
S/N 6GS1-UP
PART OF 154-1972 KIT-POWER TAKE-OFF, 139-8599 POWER TAKE-OFF AR
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-6769 | [1] | TUBE AS | |
| 2. | 3W-6770 | [1] | TUBE AS | |
| 3. | 5P-1947 | [2] | CONNECTOR | |
| 4. | 8C-3446 | [1] | VALVE-SAMPLING | |
| 5. | 8C-3447 | [1] | CAP-DUST | |
| 6. | 8T-6659 | [1] | ADAPTER | |
| 7. | 8T-6660 | [1] | ADAPTER | |
| 8. | 8T-8902 | [1] | ADAPTER-TEE | |
| 9. | 8T-9041 | [1] | CONNECTOR | |
| 10. | 9M-0164 | [4] | CLAMP-HOSE | |
| 11. | 149-2358 | [1] | TUBE AS | |
| 12. | I | [1] | HOSE AS | |
| 13. | 2M-9780 | [1] | SEAL-O-RING | |
| 14. | 3D-2824 | [2] | SEAL-O-RING | |
| 15. | 3J-1907 | [3] | SEAL-O-RING | |
| 16. | 3J-7354 | [4] | SEAL-O-RING | |
| 17. | 4J-5477 | [5] | SEAL-O-RING | |
| 18. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 19. | 5P-1404 | [1] | ADAPTER | |
| 20. | 5P-9617 | [1] | ADAPTER | |
| 21. | 6K-6307 | [2] | SEAL-O-RING | |
| 22. | 6V-8397 | [5] | SEAL-O-RING | |
| 23. | 6V-8628 | [1] | ELBOW | |
| 24. | 6V-8773 | [2] | TEE-FACE SEAL | |
| 25. | 6V-8774 | [1] | TEE | |
| 26. | 8C-8988 | [1] | ELBOW | |
| 27. | 8M-2773 | [1] | CLIP (LOOP) | |
| 28. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 29. | 5P-1291 E | HOSE (13CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP26910408
4E-7866: LINK GP
For full view, you need register
#SEBP26910409
4E-7872: LINK GP
For full view, you need register
Parts for your 65E CHALLENGER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-7875 | [1] | END AS-ROD (LH THREAD) | |
| 2. | 8R-0660 | [1] | PIVOT | |
| 3. | 3F-9932 | [1] | PIN-CLEVIS | |
| 4. | 4E-7876 | [1] | CLEVIS | |
| 5. | 3B-5302 | [1] | PIN-COTTER | |
| 6. | 117-0126 C | [1] | TUBE AS | |
| 7. | 4E-7873 | [1] | END AS-ROD (RH THREAD) | |
| 8. | 8R-0660 | [1] | PIVOT | |
| 9. | 3F-9932 | [1] | PIN-CLEVIS | |
| 10. | 4E-7874 | [1] | CLEVIS | |
| 11. | 3B-5302 | [1] | PIN-COTTER | |
| 12. | 119-1329 C | [1] | PIN-LINCH | |
| 13. | 4H-6996 | [2] | PIN-SPRING | |
| 14. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 15. | 117-0127 C | [1] | HASP | |
| 16. | 5M-6214 C | [4] | PLUG (1/8-27 PTF) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
