AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

143-7779 ENGINE AR 138 BRAKE KW (185 BHP) AT 2200 RPM. GENERAL MOTORS 3116 TRUCK ENGINE


ENGINE ARRANGEMENT
ENGINE AR
BASIC ENGINE
AIR COMPRESSOR GP
CAMSHAFT GP
CLUTCH GP

TRUCK ENGINE 3116 TRUCK ENGINE 2CW
 3116 Truck Engine 2CW00001-UP SEBP2694 3116 2CW   (1997)

ENGINE ARRANGEMENT

ENGINE AR
143-7779 ENGINE AR
155-4143 ENGINE AR
266-7605 KIT-ENGINE GASKET
 

#SEBP26940001
 

143-7779: ENGINE AR

143-7779 ENGINE AR
138 BRAKE KW (185 BHP) AT 2200 RPM. GENERAL MOTORS
i00505961 SEBP2694
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1N-3477 Y [1] BREATHER GP  
  105-1803 Y [1] CAMSHAFT GP  
  100-5473 Y [1] CONTROL & MTG GP-ENGINE ELEK  
  143-8551 Y [1] CONTROL GP-ENG RATINGS ELEK  
  100-6269 Y [1] COOLER GP-ENGINE OIL  
  118-0432 Y [1] COVER GP-CYLINDER BLOCK  
  130-4858 Y [1] COVER GP-FRONT HOUSING  
  118-0431 Y [1] COVER GP-VALVE MECHANISM  
  4W-2197 Y [1] CRANKSHAFT GP  
  7E-2482 Y [1] CYLINDER BLOCK GP  
  101-3251 Y [1] CYLINDER HEAD GP  
  4P-4451 Y [1] DAMPER GP  
  7E-2313 Y [1] PLUG GP-OIL PAN  
  7C-6998 Y [1] DRIVE GP-WATER PUMP  
  100-4928 Y [1] ELBOW GP-AIR INLET  
  122-7359 Y [1] FASTENER GP-ENGINE  
  121-8786 Y [1] FASTENER GP-FLYWHEEL  
  4P-8183 Y [1] FILTER GP-ENGINE OIL  
  115-4183 Y [1] FILTER GP-FUEL  
  120-9126 Y [1] FITTING GP-AIR COMPRESSOR  
  122-3372 Y [1] FUMES DISPOSAL GP  
  118-0433 Y [1] GAUGE GP-OIL LEVEL (DIPSTICK)  
  101-4540 Y [1] GEAR GP-FRONT  
  4P-1479 Y [1] STARTING AID GP (HEATER)  
  100-6570 Y [1] HOUSING GP-FLYWHEEL  
  101-4575 Y [1] HOUSING GP-FRONT  
  7E-2314 Y [1] LIFTING GP-ENGINE  
  7E-2315 Y [1] LINES GP-ENGINE OIL  
  107-7810 Y [1] LINES GP-FUEL  
  107-7813 Y [1] LINES GP-FUEL FILTER  
  130-8989 Y [6] LINES GP-INJECTOR HYD PUMP  
  4P-2906 Y [1] LINES GP-TURBOCHARGER OIL  
  122-0936 Y [1] LINES GP-WATER  
  6I-0919 Y [1] MANIFOLD GP-EXHAUST  
  107-7645 Y [1] MANIFOLD GP-INLET  
  4P-1723 Y [1] PAN GP-OIL  
  144-3449 Y [6] PISTON & ROD GP  
  121-2094 Y [1] PLUG GP-CYLINDER HEAD  
  119-0066 Y [1] PULLEY GP-CRANKSHAFT  
  107-7817 Y [1] PUMP & MTG GP-UNIT INJ HYD  
  115-4138 Y [1] PUMP GP-ENGINE OIL  
  130-8996 Y [6] PUMP GP-FUEL INJECTION  
  4P-3680 Y [1] PUMP GP-WATER  
  4W-1016 Y [1] SEAL GP-CRANKSHAFT  
  126-6260 Y [1] SENSOR GP-ENGINE  
  4P-1603 Y [1] SHIELD GP-TURBOCHARGER  
  126-1124 Y [1] TURBOCHARGER GP  
  101-3266 Y [1] VALVE MECHANISM GP  
  105-1796 Y [1] WIRING GP-ELECTRONIC CONTROL  
   
    AVAILABLE GASKET KIT(S):
  142-2432 KIT-GASKET (CENTRAL, LOWER STRUCTURE)  
  132-7922 KIT-GASKET (FRONT STRUCTURE)  
  124-3686 KIT-GASKET (OIL COOLER, LINES)  
  7X-2525 KIT-GASKET (REAR STRUCTURE)  
  132-7923 KIT-GASKET (SINGLE CYLINDER HEAD)  
  130-1310 KIT-GASKET (TURBOCHARGER)  
  140-7840 KIT-GASKET (WATER PUMP)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26940002
 

155-4143: ENGINE AR

155-4143 ENGINE AR
S/N 2CW1396-UP
138 BRAKE KW (185 BHP) AT 2200 RPM. GENERAL MOTORS
i00926376 SEBP2694
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  114-9086 Y [1] AIR COMPRESSOR GP  
  155-4814 Y [1] ALTERNATOR GP-CHARGING  
  1N-3477 Y [1] BREATHER GP  
  105-1803 Y [1] CAMSHAFT GP  
  155-4668 Y [1] CLUTCH GP  
  100-5473 Y [1] CONTROL & MTG GP-ENGINE ELEK  
  100-6269 Y [1] COOLER GP-ENGINE OIL  
  118-0432 Y [1] COVER GP-CYLINDER BLOCK  
  116-4550 Y [1] COVER GP-FRONT HOUSING  
  118-0431 Y [1] COVER GP-VALVE MECHANISM  
  4W-2197 Y [1] CRANKSHAFT GP  
  7E-2482 Y [1] CYLINDER BLOCK GP  
  101-3251 Y [1] CYLINDER HEAD GP  
  4P-4451 Y [1] DAMPER GP  
  7E-2313 Y [1] PLUG GP-OIL PAN  
  155-4770 Y [1] DRIVE GP-FAN  
  144-4618 Y [1] DRIVE GP-FAN  
  7C-6998 Y [1] DRIVE GP-WATER PUMP  
  100-4928 Y [1] ELBOW GP-AIR INLET  
  126-8233 Y [1] FASTENER GP-WIRING HARNESS  
  4P-8183 Y [1] FILTER GP-ENGINE OIL  
  115-4183 Y [1] FILTER GP-FUEL  
  122-8933 Y [1] FLYWHEEL GP  
  122-3372 Y [1] FUMES DISPOSAL GP  
  118-0433 Y [1] GAUGE GP-OIL LEVEL (DIPSTICK)  
  101-4540 Y [1] GEAR GP-FRONT  
  4P-1479 Y [1] STARTING AID GP (HEATER)  
  155-4782 Y [1] HOSE GP-RADIATOR  
  100-6570 Y [1] HOUSING GP-FLYWHEEL  
  101-4575 Y [1] HOUSING GP-FRONT  
  7E-2314 Y [1] LIFTING GP-ENGINE  
  155-4842 Y [1] LINES GP-AIR COMPRESSOR  
  155-4884 Y [1] LINES GP-AIR COMPRESSOR  
  7E-2315 Y [1] LINES GP-ENGINE OIL  
  107-7810 Y [1] LINES GP-FUEL  
  107-7813 Y [1] LINES GP-FUEL FILTER  
  130-8989 Y [6] LINES GP-INJECTOR HYD PUMP  
  4P-2906 Y [1] LINES GP-TURBOCHARGER OIL  
  122-0936 Y [1] LINES GP-WATER  
  6I-0919 Y [1] MANIFOLD GP-EXHAUST  
  107-7645 Y [1] MANIFOLD GP-INLET  
  155-4746 Y [1] MOUNTING GP-BELT TENSIONER  
  4P-1723 Y [1] PAN GP-OIL  
  155-4870 Y [1] SENSOR & MOUNTING GP (TEMPERATURE)  
  144-3449 Y [6] PISTON & ROD GP  
  121-2094 Y [1] PLUG GP-CYLINDER HEAD  
  119-0066 Y [1] PULLEY GP-CRANKSHAFT  
  107-7817 Y [1] PUMP & MTG GP-UNIT INJ HYD  
  115-4138 Y [1] PUMP GP-ENGINE OIL  
  130-8996 Y [6] PUMP GP-FUEL INJECTION  
  155-4638 Y [1] PUMP GP-POWER STEERING  
  4P-3680 Y [1] PUMP GP-WATER  
  4W-1016 Y [1] SEAL GP-CRANKSHAFT  
  126-6260 Y [1] SENSOR GP-ENGINE  
  4P-1603 Y [1] SHIELD GP-TURBOCHARGER  
  7E-6306 Y [1] STARTING MOTOR GP-ELECTRIC  
  155-4664 Y [1] SUPPORT GP-ENGINE  
  155-4657 Y [1] SUPPORT GP-ENGINE  
  126-1124 Y [1] TURBOCHARGER GP  
  101-3266 Y [1] VALVE MECHANISM GP  
  105-1796 Y [1] WIRING GP-ELECTRONIC CONTROL  
  155-4856 Y [1] WIRING GP-ENGINE  
    GASKET KITS WILL BE PROVIDED WHEN AVAILABLE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26940003
 

114-9086: AIR COMPRESSOR GP

114-9086 AIR COMPRESSOR GP
S/N 2CW1396-UP
PROVIDES AIR COMPRESSOR WITH GOVERNOR, TOP AIR INLET, KEYLESS SHAFT
Type 1
i00489454 SEBP2694
1149086 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-9819 [1] SEAL-INTEGRAL  
2. 4P-5106 [1] BRACKET  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
5. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
6. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
7. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 7C-3179 [1] GEAR (50-TEETH)  
9. 126-8214 Y [1] AIR COMPRESSOR GP  
10. 090-7055 I [1] HOSE AS  
11. 5P-4479 [1] ELBOW (FLARED-LONG)  
12. 6B-6682 [1] NUT-FULL (3/4-16-THD)  
13. 7X-0521 [1] WASHER-HARD (20X36.5X5-MM THK)  
14. 030-7946 [1] ELBOW  
15. 3J-7354 [1] SEAL-O-RING  
16. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
17. 6D-3479 [1] CLIP  
18. 6L-1883 [1] GASKET  
19. 4P-5388 [1] GOVERNOR-COMPRESSOR  
20. 4M-6424 [2] BOLT (5/16-18X3-IN)  
21. 4L-7318 [2] LOCKWASHER  
22. 4P-5389 [1] VALVE AS-RELIEF  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26940004
 

114-9086: AIR COMPRESSOR GP

114-9086 AIR COMPRESSOR GP
S/N 2CW1396-UP
PROVIDES AIR COMPRESSOR WITH GOVERNOR, TOP AIR INLET, KEYLESS SHAFT
Type 2
i01231491 SEBP2694
1149086 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-9819 [1] SEAL-INTEGRAL  
2. 4P-5106 [1] BRACKET  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
5. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
6. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
7. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 7C-3179 [1] GEAR (50-TEETH)  
9. 149-4915 CY [1] AIR COMPRESSOR GP  
10. 090-7055 I [1] HOSE AS  
11. 5P-4479 [1] ELBOW (FLARED-LONG)  
12. 6B-6682 [1] NUT-FULL (3/4-16-THD)  
13. 7X-0521 [1] WASHER-HARD (20X36.5X5-MM THK)  
14. 030-7946 [1] ELBOW  
15. 3J-7354 [1] SEAL-O-RING  
16. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
17. 6D-3479 [1] CLIP  
18. 6L-1883 [1] GASKET  
19. 4P-5388 [1] GOVERNOR-COMPRESSOR  
20. 4M-6424 [2] BOLT (5/16-18X3-IN)  
21. 4L-7318 [2] LOCKWASHER  
22. 4P-5389 [1] VALVE AS-RELIEF  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26940005
 

114-9086: AIR COMPRESSOR GP

114-9086 AIR COMPRESSOR GP
S/N 2CW1396-UP
PROVIDES AIR COMPRESSOR WITH GOVERNOR, TOP AIR INLET, KEYLESS SHAFT
Type 3
i01231594 SEBP2694
1149086 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9679 [1] GOVERNOR AS-AIR COMPRESSOR  
  2S-2923 [1] COVER AS  
  9M-0402 [1] KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)  
    (INCLUDES GROMMETS, FILTERS, SPRING, VALVE, COVER, RING & GASKET)
2. 4P-5106 [1] BRACKET  
3. 4P-5389 [1] VALVE AS-RELIEF (PRESSURE PURGE)(AIR COMPRESSOR)  
4. 6L-1883 [1] GASKET  
5. 7C-3179 [1] GEAR (50-TEETH)  
6. 135-9819 [1] SEAL-INTEGRAL  
7. 149-4915 Y [1] AIR COMPRESSOR GP  
8. 200-1196 CI [1] HOSE AS  
9. 061-7538 C [1] SEAL-O-RING  
10. 2N-1287 [1] ELBOW-FLARED  
11. 4L-7318 [2] LOCKWASHER  
12. 4M-6424 [2] BOLT (5/16-18X3-IN)  
13. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 6B-6682 [1] NUT-FULL (3/4-16-THD)  
15. 6D-3479 [1] CLIP  
16. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
17. 7X-0521 [1] WASHER-HARD (20X36.5X5-MM THK)  
18. 8C-6866 C [1] CONNECTOR  
19. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
21. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
22. 8T-6757 [3] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26940006
 

126-8214: AIR COMPRESSOR GP

126-8214 AIR COMPRESSOR GP
S/N 2CW1396-UP
PART OF 114-9086 AIR COMPRESSOR GP
i00515190 SEBP2694
1268214 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4358 [1] FLANGE  
2. 6D-1004 [1] GASKET  
3. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
4. 6V-0387 [1] PLUG-PIPE  
5. 4P-3977 [1] GASKET-CYLINDER HEAD  
6. 7E-8928 [1] GASKET  
7. 6V-1820 M [2] BOLT (M10X1.5X30-MM)  
8. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
9. 4P-3966 [1] PISTON & ROD AS  
   
    AVAILABLE REPAIR KIT(S):
  7E-8923 [1] KIT-CRANKSHAFT BEARING (AIR COMPRESSOR)  
    (INCLUDES BEARINGS, INSERTS, GASKETS, SEALS, & WASHERS)
  7E-8925 [1] KIT-STANDARD RING (AIR COMPRESSOR)  
    (INCLUDES INSTRUCTIONS & RINGS)
  7E-8926 [1] KIT-CYLINDER HEAD (AIR COMPRESSOR)  
    (INCLUDES GASKETS, O-RING, PISTON, SEATS, SPRINGS, STOPS, & VALVES)
  150-5146 [1] KIT-UNLOADER (AIR COMPRESSOR)  
  M   METRIC PART
 

#SEBP26940007
 

149-4915: AIR COMPRESSOR GP

149-4915 AIR COMPRESSOR GP
S/N 2CW1396-UP
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 114-9086 AIR COMPRESSOR GP
i00670364 SEBP2694
1494915 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4358 [1] FLANGE  
2. 6D-1004 [1] GASKET  
3. 8T-6757 [1] PLUG-PIPE  
4. 141-1546 [1] PLUG-PIPE  
5. 4P-3977 [1] GASKET-CYLINDER HEAD  
6. 7E-8928 [1] GASKET  
7. 6V-1820 M [2] BOLT (M10X1.5X30-MM)  
8. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
9. 4P-3966 [1] PISTON & ROD AS  
10. 128-7759 [1] ADAPTER AS  
  128-7761 [3] BOLT  
   
    AVAILABLE REPAIR KIT(S):
  7E-8923 [1] KIT-CRANKSHAFT BEARING (AIR COMPRESSOR)  
    (INCLUDES FRONT COVER SEAL, FRONT MAIN & REAR BEARINGS, FRONT & REAR WASHERS,
    BEARING INSERTS, SLOTTED INSERTS, O-RING SEAL, CYLINDER HEAD & BASE GASKETS)
  164-7572 [1] KIT-RING (AIR COMPRESSOR)  
    (INCLUDES PISTON RINGS & SPACERS)
  7E-8926 [1] KIT-CYLINDER HEAD (AIR COMPRESSOR)  
    (INCLUDES UNLOADER PISTONS, UNLOADER SPRINGS, UNLOADER O-RING, UNLOADER GASKET, INLET VALVES, INLET VALVE STOPS,
    INLET VALVE SEATS, INLET SPRINGS, INLET GASKETS, DISCHARGE VALVES, DISCHARGE VALVE SEATS, DISCHARGE VALVE SPRINGS,
    DISCHARGE GASKET, GOVERNOR GASKET, STRAINER GASKET, & CYLINDER HEAD GASKET)
  M   METRIC PART
 

#SEBP26940008
 

105-1803: CAMSHAFT GP

105-1803 CAMSHAFT GP
i00478409 SEBP2694
1051803 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-8841 [1] CAMSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 107-7809 [1] GEAR-CAMSHAFT (100-TEETH)  
2. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
3. 107-7694 [1] PLATE-THRUST  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP26940009
 

155-4668: CLUTCH GP

155-4668 CLUTCH GP
S/N 2CW1394-UP
i01005587 SEBP2694
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-7807 [1] BALL BEARING  
  0S-1588 [8] BOLT (3/8-16X1.25-IN)  
  141-2756 [1] DISC AS  
  155-4667 [1] PLATE AS  
  3V-3308 [8] WASHER-HARD (10.2X20.5X2.5-MM THK)  
  8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
 

Information:

Truck Engine News
New Truck Engine News Format {0374}
1999/12/01
Smoke Emissions from On-Highway Diesel Engines and Roadside Testing {1000, 1088}
1999/12/01
New Service Manuals and Revised Service Manuals are Available {1000}
2000/04/01
Use the Proper Electronic Troubleshooting Guide {1000}
2000/04/01
Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/01/01
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/01
Retirement of the Paper Version of Truck Engine News {1000}
2007/02/01
Retirement of the Paper Version for Truck Engine News {0374, 7006}
2007/08/01
Unauthorized Engine Modification {1000}
2007/09/01
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
New Engine News Format {0374}
1999/12/01
Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01
Proper Storage Procedures for Commercial Engines {0355, 1000}
2009/12/03
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Operation and Maintenance Manual
Starting Recommendations
Cold Weather Recommendations for On-Highway Diesel Truck Engines
Special Instruction
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Differences in Appearance of Cat <SUP>&reg;</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Engine Design
3100 HEUI TRUCK ENGINE
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Magazine
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/22
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 3116 :

155-4143 ENGINE AR
AIR COMPRESSOR GP
114-9086 AIR COMPRESSOR GP
AIR COMPRESSOR GP
114-9086 AIR COMPRESSOR GP
AIR COMPRESSOR GP
114-9086 AIR COMPRESSOR GP
AIR COMPRESSOR GP
126-8214 AIR COMPRESSOR GP
AIR COMPRESSOR GP
149-4915 AIR COMPRESSOR GP
CAMSHAFT GP
105-1803 CAMSHAFT GP
155-4668 CLUTCH GP

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QU&#201;BEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.