135-5714 ENGINE AR S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP PART OF 141-5700, 143-9600, 150-0099, 150-0100 GENERAL AR 312B L

Part No	Qty	Parts name
131-8991 Y	[1]	AIR CLEANER GP
116-1155 Y	[1]	DRAIN GP-ENGINE OIL
135-5716 Y	[1]	LINES GP-AIR
135-5719 Y	[1]	MOUNTING GP-ENGINE
135-5717 Y	[1]	RADIATOR & HYD OIL COOLER GP
Y		SEPARATE ILLUSTRATION

#SEBP26990012

145-8504: CAMSHAFT GP

CAMSHAFT GP

145-8504 CAMSHAFT GP
S/N 7BJ1-UP; 5HK1-99999
PART OF 130-4666 ENGINE AR

i00541173 SEBP2699

For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	356-3503	[1]	CAMSHAFT
2.	232-3666	[1]	WASHER-THRUST
3.	067-6179	[1]	DOWEL
4.	9Y-2633	[1]	GEAR-CAMSHAFT (56-TEETH)
5.	067-6135	[1]	KEY-WOODRUFF (CAMSHAFT)
6.	7C-4616 M	[1]	BOLT (M12X1.75X45-MM)
7.	133-1011	[1]	WASHER
8.	324-0444	[1]	HUB-IDLER GEAR
9.	2W-1529	[1]	GEAR AS-IDLER (63-TEETH)
9A.	067-6899	[2]	BUSHING-IDLER GEAR
10.	6I-0789 M	[3]	BOLT (M10X1.5X60-MM)
11.	067-6900	[1]	PLATE-RETAINING
	M		METRIC PART

#SEBP26990013

141-6149: COVER GP-ACCESSORY DRIVE

COVER GP-ACCESSORY DRIVE

141-6149 COVER GP-ACCESSORY DRIVE
S/N 7BJ1-UP; 5HK1-99999
PART OF 130-4666 ENGINE AR

i00541121 SEBP2699

1416149 COVER GP-ACCESSORY DRIVE Parts scheme

For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-4830 M	[1]	BOLT (M10X1.5X20-MM)
2.	6I-0593 M	[1]	BOLT (M10X1.5X30-MM)
3.	138-2068	[1]	PLATE
4.	111-8222 M	[5]	BOLT (M8X16-MM)
5.	6I-0646 M	[1]	BOLT (M10X1.5X14-MM)
6.	067-6810	[1]	WASHER
7.	206-4277	[1]	GASKET
	M		METRIC PART

#SEBP26990014

141-6149: COVER GP-ACCESSORY DRIVE

COVER GP-ACCESSORY DRIVE

141-6149 COVER GP-ACCESSORY DRIVE
S/N 7BJ1-UP
PART OF 130-4666 ENGINE AR

i01582471 SEBP2699

For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-4830 M	[1]	BOLT (M10X1.5X20-MM)
2.	6I-0593 M	[1]	BOLT (M10X1.5X30-MM)
3.	329-7854 C	[1]	PLATE AS
3A.	329-7856	[1]	SEAL-O-RING
4.	111-8222 M	[5]	BOLT (M8X16-MM)
5.	6I-0646 M	[1]	BOLT (M10X1.5X14-MM)
6.	067-6810	[1]	WASHER
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP26990015

160-4819: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

160-4819 COVER GP-VALVE MECHANISM
S/N 7BJ1-UP; 5HK1-99999
PART OF 130-4666 ENGINE AR

i01024520 SEBP2699

1604819 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
2.	177-2939	[3]	NUT-RETAINING
3.	6I-0512	[1]	GASKET
4.	6I-0654 M	[2]	BOLT (M10X1.5X25-MM)
5.	6I-0843 M	[2]	BOLT (M6X1X25-MM)
6.	6I-4037	[1]	PLATE
7.	101-3675	[3]	SEAL
8.	124-3815 M	[3]	BOLT (M8X1.25X16-MM)
9.	126-8536	[1]	WASHER
10.	6L-4725	[1]	CLAMP-HOSE
11.	160-4820	[1]	BRACKET
12.		[1]	BRACKET
13.	160-4826	[2]	CLAMP-HOSE
14.		[1]	PIPE
15.		[2]	WASHER (16X25.5X2.1-MM THK)
16.		[1]	TUBE-BREATHER
17.	165-0139	[1]	COVER AS-VALVE
17A.	147-9544	[1]	GASKET (VALVE COVER)
17B.	136-3608	[1]	CAP AS (ENGINE OIL FILLER)
17C.	124-0506	[1]	SEAL
18.	165-4021	[1]	CANISTER AS-BREATHER (CRANKCASE)
18A.	185-6643	[1]	SEAL (BREATHER)
19.	166-5204	[1]	HOSE (CRANKCASE BREATHER)
20.	166-5205	[1]	CLAMP-HOSE
21.	171-2338	[1]	HOSE
	M		METRIC PART

#SEBP26990016

160-4819: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

160-4819 COVER GP-VALVE MECHANISM
S/N 7BJ1-40834
PART OF 130-4666 ENGINE AR

i01366211 SEBP2699

For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
2.	6I-0507	[3]	NUT
3.	6I-0512	[1]	GASKET
4.	6I-0654 M	[2]	BOLT (M10X1.5X25-MM)
5.	6I-0843 M	[2]	BOLT (M6X1X25-MM)
6.	6I-4037	[1]	PLATE
7.	101-3675	[3]	SEAL
8.	124-3815 M	[3]	BOLT (M8X1.25X16-MM)
9.	126-8536	[1]	WASHER
10.	127-8287	[1]	CLAMP-HOSE
11.	160-4820	[1]	BRACKET
12.		[1]	BRACKET
13.	160-4826	[2]	CLAMP-HOSE
14.		[1]	PIPE
15.		[2]	WASHER (16X25.5X2.1-MM THK)
16.		[1]	TUBE-BREATHER
17.	165-0139	[1]	COVER AS-VALVE
17A.	147-9544	[1]	GASKET (VALVE COVER)
17B.	136-3608	[1]	CAP AS (ENGINE OIL FILLER)
17C.	124-0506	[1]	SEAL
18.	165-4021	[1]	CANISTER AS-BREATHER (CRANKCASE)
18A.	185-6643	[1]	SEAL (BREATHER)
19.	166-5204	[1]	HOSE (CRANKCASE BREATHER)
20.	166-5205	[1]	CLAMP-HOSE
21.	137-8064	[1]	HOSE (CRANKCASE BREATHER)
22.	136-3339	[1]	SPRING (CRANKCASE BREATHER HOSE)
	M		METRIC PART

#SEBP26990017

160-4819: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

160-4819 COVER GP-VALVE MECHANISM
S/N 7BJ40835-UP
PART OF 130-4666 ENGINE AR

i01559767 SEBP2699

For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
2.	177-2939	[3]	NUT-RETAINING
3.	6I-0512	[1]	GASKET
4.	6I-0654 M	[2]	BOLT (M10X1.5X25-MM)
5.	6I-0843 M	[2]	BOLT (M6X1X25-MM)
6.	6I-4037	[1]	PLATE
7.	101-3675	[3]	SEAL
8.	124-3815 M	[2]	BOLT (M8X1.25X16-MM)
9.	126-8536	[1]	WASHER
10.	6L-4725	[1]	CLAMP-HOSE
11.	160-4820	[1]	BRACKET
13.	160-4826	[2]	CLAMP-HOSE
17.	206-3070	[1]	COVER AS-VALVE
17A.	200-6374	[1]	SEAL-COVER (VALVE)
17B.	136-3608	[1]	CAP AS (ENGINE OIL FILLER)
17C.	124-0506	[1]	SEAL
18.	165-4021	[1]	CANISTER AS-BREATHER (CRANKCASE)
18A.	185-6643	[1]	SEAL (BREATHER)
19.	166-5204	[1]	HOSE (CRANKCASE BREATHER)
20.	166-5205	[1]	CLAMP-HOSE
21.	137-8064	[1]	HOSE (CRANKCASE BREATHER)
22.	136-3339	[1]	SPRING (CRANKCASE BREATHER HOSE)

	F	[1]	WASHER (16X25.5X2.1-MM THK)
	F		NOT SHOWN
	M		METRIC PART

#SEBP26990018

145-6688: CRANKSHAFT GP

CRANKSHAFT GP

145-6688 CRANKSHAFT GP
S/N 7BJ1-UP; 5HK1-99999
PART OF 130-4666 ENGINE AR

i00541160 SEBP2699

For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-8736	[1]	KEY-WOODRUFF
2.	4P-9948	[1]	CRANKSHAFT GP
3.	353-2205 B	[1]	KIT-ROD BEARING (STANDARD)
	353-2206 AB		KIT-ROD BEARING (0.25-MM US)
	353-2207 AB		KIT-ROD BEARING (0.50-MM US)
	353-2208 AB		KIT-ROD BEARING (0.75-MM US)
4.	032-9090 B	[2]	WASHER-THRUST (STANDARD-UPPER)
	067-6873 AB		WASHER-THRUST (0.18-MM OS)(UPPER)
5.	353-7427 B	[1]	KIT-BEARING (STANDARD)
	353-7428 AB		KIT-BEARING (0.25-MM US)
	353-7429 AB		KIT-BEARING (0.50-MM US)
	353-7430 AB		KIT-BEARING (0.75-MM US)
6.	032-9091 B	[2]	WASHER-THRUST (STANDARD-LOWER)
	067-6874 AB		WASHER-THRUST (0.18-MM OS)(LOWER)
7.	6I-0223	[1]	GEAR-CRANKSHAFT (28-TEETH)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP26990019

145-6688: CRANKSHAFT GP

CRANKSHAFT GP

145-6688 CRANKSHAFT GP
S/N 7BJ1-UP
PART OF 130-4666 ENGINE AR

i02726427 SEBP2699

For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	067-6135	[1]	KEY-WOODRUFF
2.	364-2828 Y	[1]	CRANKSHAFT GP
3.	6I-0223	[1]	GEAR-CRANKSHAFT (28-TEETH)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}
Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
3054 Engine

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Systems Operation

Engine Design
3054 Engine

General Information
3054 Engine

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Testing and Adjusting

Troubleshooting
3054 Engine

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}

Disassembly and Assembly

Engine Design
3054 Engine for Caterpillar Built Machines

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/21

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 312B L :

135-5715 INSTALLATION AR-ENGINE

145-8504 CAMSHAFT GP

141-6149 COVER GP-ACCESSORY DRIVE

160-4819 COVER GP-VALVE MECHANISM

145-6688 CRANKSHAFT GP

Truck sale:

43,000

Caterpillar 312BL, Construction
- Crawler Excavators
CARTER MACHINERY COMPANY, INC.

CATERPILLAR 312BL 1998
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan

CATERPILLAR 312BL 1998
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -

USD $27,019

2001 CAT 312BL

BERGERAT MONNOYEUR
SAINT-DENIS, 93, France

Call

1997 CAT 312BL

OREGON TRACTOR & EQ - PARTS