AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

147-7337 PUMP GP-FUEL INJECTION S/N 5HK1-90222 PART OF 130-4666 ENGINE AR 312B L EXCAVATOR


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-REFUELING
SEPARATOR GP-WATER
PUMP GP-REFUELING

EXCAVATOR 312B L EXCAVATOR 2KW
 312B & 312B L Excavators 2KW00001-UP (MACHINE) POWERED BY 3054 Engine SEBP2699 312B L 2KW   (1997)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
147-7337 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
147-7337 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
147-7337 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
147-7337 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
149-4721 PUMP GP-FUEL INJECTION
 

#SEBP26990090
 

147-7337: PUMP GP-FUEL INJECTION

147-7337 PUMP GP-FUEL INJECTION
S/N 5HK1-90222
PART OF 130-4666 ENGINE AR
i00566020 SEBP2699
1477337 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-4721 Y [1] PUMP GP-FUEL INJECTION  
2. 140-8723 [1] LEAD  
3. 067-7006 [1] SEAL  
4. 5P-6627 D LOCKWIRE (0.1M)  
5. 101-3877 [3] STUD (M8X1.25X37-MM)  
6. 6I-0291 M [3] NUT (M8X1.25-THD)  
7. 154-6016 [1] GEAR-PUMP (56-TEETH)  
8. 140-8713 [4] CLIP  
9. 140-8714 [2] CLIP  
10. 148-7108 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
11. 148-7110 [1] HOLDER  
12. 148-7111 [1] NOZZLE  
13. 140-8718 [4] WASHER  
14. 140-8719 [1] LINE-LEAKOFF  
15. 124-3714 [3] BOLT  
16. 140-8720 [8] WASHER  
17. 124-3713 [1] CONNECTION  
18. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
19. 142-5070 [1] TUBE AS  
20. 067-6264 [1] FITTING-FLARED  
21. 067-6265 [1] FITTING-BRASS  
22. 033-7625 [1] ELBOW  
23. 149-4910 [1] SWITCH (TIMING ADVANCE)  
24. 154-8055 [1] HOSE  
25. 107-2348 [2] CLIP  
26. [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
27. [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
28. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
29. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
  D   ORDER BY THE METER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26990091
 

147-7337: PUMP GP-FUEL INJECTION

147-7337 PUMP GP-FUEL INJECTION
S/N 7BJ1-25912; 5HK90223-99999
PART OF 130-4666 ENGINE AR
i00995702 SEBP2699
1477337 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-4721 Y [1] PUMP GP-FUEL INJECTION  
2. 140-8723 [1] LEAD  
3. 067-7006 [1] SEAL  
4. 5P-6627 D LOCKWIRE (0.1M)  
5. 101-3877 [3] STUD (M8X1.25X37-MM)  
6. 6I-0291 M [3] NUT (M8X1.25-THD)  
7. 154-6016 [1] GEAR-PUMP (56-TEETH)  
8. 140-8713 [4] CLIP  
9. 140-8714 [2] CLIP  
10. 148-7108 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
11. 148-7110 [1] HOLDER  
12. 148-7111 [1] NOZZLE  
13. 140-8718 [4] WASHER  
14. 140-8719 [1] LINE-LEAKOFF  
15. 124-3714 [3] BOLT  
16. 140-8720 [8] WASHER  
17. 124-3713 [1] CONNECTION  
18. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
19. 142-5070 [1] TUBE AS  
20. 067-6264 [1] FITTING-FLARED  
21. 067-6265 [1] FITTING-BRASS  
22. 033-7625 [1] ELBOW  
23. 149-4910 [1] SWITCH (TIMING ADVANCE)  
24. 154-8055 [1] HOSE  
25. 107-2348 [2] CLIP  
26. 163-8673 C [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
27. 163-8674 C [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
28. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
29. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26990092
 

147-7337: PUMP GP-FUEL INJECTION

147-7337 PUMP GP-FUEL INJECTION
S/N 7BJ1-25912
PART OF 130-4666 ENGINE AR
i01492179 SEBP2699
1477337 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-4721 Y [1] PUMP GP-FUEL INJECTION  
2. 140-8723 [1] LEAD  
3. 067-7006 [1] SEAL  
4. 5P-6627 D LOCKWIRE (0.1M)  
5. 101-3877 [3] STUD (M8X1.25X37-MM)  
6. 6I-0291 M [3] NUT (M8X1.25-THD)  
7. 154-6016 [1] GEAR-PUMP (56-TEETH)  
8. 140-8713 [4] CLIP  
9. 140-8714 [2] CLIP  
10. 148-7108 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
11. 148-7110 [1] HOLDER  
12. 148-7111 [1] NOZZLE  
13. 140-8718 [4] WASHER  
14. 140-8719 [1] LINE-LEAKOFF  
15. 124-3714 [3] BOLT  
16. 140-8720 [8] WASHER  
17. 124-3713 [1] CONNECTION  
18. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
19. 142-5070 [1] TUBE AS  
20. 067-6264 [1] FITTING-FLARED  
21. 067-6265 [1] FITTING-BRASS  
22. 033-7625 [1] ELBOW  
23. 149-4910 [1] SWITCH (TIMING ADVANCE)  
24. 154-8055 [1] HOSE  
25. 107-2348 [2] CLIP  
26. 163-8673 C [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
27. 163-8674 C [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
28. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
29. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26990093
 

147-7337: PUMP GP-FUEL INJECTION

147-7337 PUMP GP-FUEL INJECTION
S/N 7BJ25913-UP
PART OF 130-4666 ENGINE AR
i02214258 SEBP2699
1477337 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-4721 Y [1] PUMP GP-FUEL INJECTION  
2. 140-8723 [1] LEAD  
3. 067-7006 [1] SEAL  
4. 5P-6627 D LOCKWIRE (0.1M)  
5. 101-3877 [3] STUD (M8X1.25X37-MM)  
6. 6I-0291 M [3] NUT (M8X1.25-THD)  
7. 154-6016 [1] GEAR-PUMP (56-TEETH)  
8. 140-8713 [4] CLIP  
9. 140-8714 [2] CLIP  
10. 148-7108 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
11. 148-7110 [1] HOLDER  
12. 148-7111 [1] NOZZLE  
13. 140-8718 [4] WASHER  
14. 140-8719 [1] LINE-LEAKOFF  
15. 247-9844 C [3] BOLT (M6X1X16-MM)  
16. 241-4754 C [8] WASHER (6.35X9.75X1.55-MM THK)  
17. 247-9855 C [1] BOLT (M6X1X30-MM)  
18. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
19. 142-5070 [1] TUBE AS  
20. 067-6264 [1] FITTING-FLARED  
21. 067-6265 [1] FITTING-BRASS  
22. 033-7625 [1] ELBOW  
23. 169-5326 [1] SWITCH-TEMPERATURE  
24. 154-8055 [1] HOSE  
25. 107-2348 [2] CLIP  
26. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
27. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
28. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
29. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP26990094
 

149-4721: PUMP GP-FUEL INJECTION

149-4721 PUMP GP-FUEL INJECTION
S/N 7BJ1-UP; 5HK1-99999
PART OF 147-7337 PUMP GP-FUEL INJECTION
i00650415 SEBP2699
1494721 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 161-2161 [1] SEAL-O-RING  
3. 192-9155 [1] CONTROL AS-FUEL RATIO  
4. 116-8648 [2] RING  
   
    AVAILABLE REPAIR KIT(S):
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
 

#SEBP26990095
 

144-8807: PUMP GP-REFUELING

144-8807 PUMP GP-REFUELING
S/N 9FS1-137; 2KW1-UP
PART OF 142-9628 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
i00567874 SEBP2699
1448807 PUMP GP-REFUELING Parts scheme
  For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-8808 [1] SUPPORT AS  
2. 120-5114 [1] FILM-INSTRUCTION (REFUELING PUMP)  
3. 123-3928 [1] PUMP & MOTOR GP-FUEL TRANSFER  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
4. 118-6731 [1] CAP AS  
5. 5C-0746 Y [1] STRAINER GP-FUEL  
6. 5P-0742 E HOSE (350 CM)  
7. 006-5707 [1] ELBOW-PIPE  
8. 102-6170 [1] CONNECTOR-HOSE  
9. 093-2068 [2] GROMMET  
10. 7I-0845 [1] CONNECTOR  
11. 4I-8443 [1] VALVE-CHECK  
12. 005-7898 [2] CONNECTOR-HOSE  
13. 2S-3440 [4] CLAMP-HOSE  
14. 122-4021 [1] COVER  
15. 5C-6108 Y [1] SWITCH GP-REFUELING (FUEL TANK SHUTOFF)  
16. 8T-4192 M [5] BOLT (M12X1.75X25-MM)  
17. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
18. 5P-1076 [5] WASHER-HARD (13.5X30X4-MM THK)  
19. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
20. 5P-0742 E [2] HOSE (95 CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26990096
 

144-8807: PUMP GP-REFUELING

144-8807 PUMP GP-REFUELING
S/N 9FS138-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 142-9628 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT
i00726372 SEBP2699
1448807 PUMP GP-REFUELING Parts scheme
  For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-8808 [1] SUPPORT AS  
2. 120-5114 [1] FILM-INSTRUCTION (REFUELING PUMP)  
3. 123-3928 [1] PUMP & MOTOR GP-FUEL TRANSFER  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
4. 118-6731 [1] CAP AS  
5. 5C-0746 Y [1] STRAINER GP-FUEL  
6. 5P-0742 E HOSE (350 CM)  
7. 6B-9081 C [1] BUSHING-REDUCER  
8. 003-9163 C [1] ELBOW (90 DEGREE)  
9. 093-2068 [2] GROMMET  
10. 3B-6490 [1] COUPLING-PIPE  
11. 4I-8443 [1] VALVE-CHECK  
12. 005-7898 C [1] CONNECTOR-HOSE  
13. 2S-3440 C [4] CLAMP-HOSE  
14. 122-4021 [1] COVER  
15. 5C-6108 Y [1] SWITCH GP-REFUELING (FUEL TANK SHUTOFF)  
16. 8T-4192 M [5] BOLT (M12X1.75X25-MM)  
17. 5P-1076 [5] WASHER-HARD (13.5X30X4-MM THK)  
18. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
19. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
20. 6D-3534 C [1] CONNECTOR-HOSE  
21. 5P-0743 EC HOSE (105 CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26990097
 

144-8807: PUMP GP-REFUELING

144-8807 PUMP GP-REFUELING
S/N 9FS138-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 142-9628 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT
i01144015 SEBP2699
1448807 PUMP GP-REFUELING Parts scheme
  For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-8808 [1] SUPPORT AS  
2. 120-5114 [1] FILM-INSTRUCTION (REFUELING PUMP)  
3. 175-4807 [1] PUMP & MOTOR GP  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
4. 118-6731 [1] CAP AS  
5. 5C-0746 Y [1] STRAINER GP-FUEL  
6. 5P-0742 E HOSE (350 CM)  
7. 6B-9081 [1] BUSHING-REDUCER  
8. 003-9163 [1] ELBOW (90 DEGREE)  
9. 093-2068 [2] GROMMET  
10. 7I-0845 [1] CONNECTOR  
11. 4I-8443 [1] VALVE-CHECK  
12. 005-7898 [1] CONNECTOR-HOSE  
13. 2S-3440 [4] CLAMP-HOSE  
14. 122-4021 [1] COVER  
15. 5C-6108 Y [1] SWITCH GP-REFUELING (FUEL TANK SHUTOFF)  
16. 8T-4192 M [5] BOLT (M12X1.75X25-MM)  
17. 5P-1076 [5] WASHER-HARD (13.5X30X4-MM THK)  
18. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
19. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
20. 6D-3534 [2] CONNECTOR-HOSE  
21. 5P-0743 E HOSE (105 CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP26990098
 

138-3097: SEPARATOR GP-WATER

138-3097 SEPARATOR GP-WATER
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 135-1446 LINES GP-FUEL
i00994158 SEBP2699
1383097 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3912 [1] WASHER  
2. 101-3949 [1] SEAL  
3. 101-3953 [1] SEAL  
4. 101-3955 [1] SEAL  
5. 138-3100 [1] ELEMENT-WATER SEPARATOR  
6. 101-3739 [1] NUT  
7. 101-3740 [1] CAP  
8. 101-3741 [1] SEAL  
   
    AVAILABLE REPLACEMENT PART(S):
  118-5637 [1] KIT-BOWL (WATER SEPARATOR)  
 

#SEBP26990099
 

5C-0746: STRAINER GP-FUEL

5C-0746 STRAINER GP-FUEL
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 144-8807 PUMP GP-REFUELING
AN ATTACHMENT
i00380943 SEBP2699
5C0746 STRAINER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 312B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 033-6783 [1] FITTING  
2. 5C-0747 [1] COUPLING  
3. 5C-0748 [1] STRAINER AS (FUEL)  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Fuel Injection Pump
3054 Engine
Fuel Injection Nozzles
3054 Engine
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 Engine
Disassembly and Assembly
Fuel Injection Nozzles - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Remove
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Service Magazine
Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}
1998/08/17
Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/09
Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08
Remanufactured Stanadyne Fuel Injection Pumps are now available for 3054 and 3056 Engines {1251}
2000/10/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Support for Fuel Injection Pumps {1251}
2008/07/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 312B L :

142-9628 PUMP AR-FUEL TRANSFER
LINES GP-FUEL
145-4952 LINES GP-FUEL
LINES GP-FUEL
145-4952 LINES GP-FUEL
LINES GP-FUEL
135-1446 LINES GP-FUEL
FITTING GP-FUEL LINES
130-4646 FITTING GP-FUEL LINES
FILTER GP-FUEL
148-5456 FILTER GP-FUEL
FILTER GP-FUEL
148-5456 FILTER GP-FUEL
FILTER GP-FUEL
148-5456 FILTER GP-FUEL
PUMP GP-FUEL INJECTION
147-7337 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
147-7337 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
147-7337 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
149-4721 PUMP GP-FUEL INJECTION
PUMP GP-REFUELING
144-8807 PUMP GP-REFUELING
PUMP GP-REFUELING
144-8807 PUMP GP-REFUELING
PUMP GP-REFUELING
144-8807 PUMP GP-REFUELING
SEPARATOR GP-WATER
138-3097 SEPARATOR GP-WATER

Truck sale:

Caterpillar 312BL, Construction
43,000 
Caterpillar 312BL, Construction
- Crawler Excavators
CARTER MACHINERY COMPANY, INC.
CATERPILLAR 312BL 1998
 
CATERPILLAR 312BL 1998
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
 
 
CATERPILLAR 312BL 1998
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
2001 CAT 312BL
USD $27,019 
2001 CAT 312BL

BERGERAT MONNOYEUR
SAINT-DENIS, 93, France
 
Call 
1997 CAT 312BL

OREGON TRACTOR & EQ - PARTS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.