ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPSWITCH GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#SEBP26990130
139-0655: STARTING MOTOR GP-ELECTRIC
139-0655 STARTING MOTOR GP-ELECTRIC
S/N 7BJ1-UP; 5HK1-99999
PART OF 130-4666 ENGINE AR
S/N 7BJ1-UP; 5HK1-99999
PART OF 130-4666 ENGINE AR
Parts for your 312B L EXCAVATOR:
CATERPILLAR SIS#SEBP26990131
547-7976: SWITCH & WIRE GP-FUEL LEVEL
547-7976 SWITCH & WIRE GP-FUEL LEVEL
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
FUEL LEVEL SWITCH KIT
PART OF 5C-6108 SWITCH GP-REFUELING
AN ATTACHMENT
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
FUEL LEVEL SWITCH KIT
PART OF 5C-6108 SWITCH GP-REFUELING
AN ATTACHMENT
Parts for your 312B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
3S-2093 | [18] | STRAP-CABLE | ||
418-6596 | [1] | SWITCH AS-LIQUID LEVEL | ||
3T-4696 | [1] | TERMINAL-RING (10-GA TO 12-GA, 7/16-IN SCREW) | ||
6A-3361 H | WIRE-ELECTRICAL (16-GA)(60-DM) | |||
H | ORDER BY THE DECIMETER |
#SEBP26990132
7N-0718: SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 147-0058, 176-8196 PANEL GP-CIRCUIT BREAKER
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 147-0058, 176-8196 PANEL GP-CIRCUIT BREAKER
#SEBP26990133
7Y-3918: SWITCH GP-HEAT START
7Y-3918 SWITCH GP-HEAT START
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 148-5559 WIRING GP-QUICK COUPLER
AN ATTACHMENT
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 148-5559 WIRING GP-QUICK COUPLER
AN ATTACHMENT
#SEBP26990134
5C-6108: SWITCH GP-REFUELING
5C-6108 SWITCH GP-REFUELING -FUEL TANK SHUTOFF
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 144-8807 PUMP GP-REFUELING
AN ATTACHMENT
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 144-8807 PUMP GP-REFUELING
AN ATTACHMENT
Parts for your 312B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8J-9236 | [1] | SWITCH (LIQUID LEVEL)(FUEL) | |
2. | 5C-6074 | [1] | FITTING | |
3. | 2S-4078 | [1] | SEAL-O-RING | |
4. | 3D-2824 | [1] | SEAL-O-RING | |
5. | 8S-1815 | [1] | PLUG | |
6. | 8S-1814 | [2] | INSULATOR | |
7. | 4B-2049 | [2] | NUT (10-32-THD) | |
8. | 8S-1812 | [1] | TERMINAL | |
9. | 9B-4499 | [1] | SCREW-MACHINE (8-36X0.375-IN) | |
10. | 7N-9194 | [1] | RING-TERMINAL (18-GA TO 22-GA) | |
11. | 7X-3159 E | TUBE-HEAT SHRINK (3-CM) | ||
AVAILABLE REPAIR KIT(S): | ||||
547-7976 Y | [1] | SWITCH & WIRE GP-FUEL LEVEL | ||
E | ORDER BY THE CENTIMETER | |||
Y | SEPARATE ILLUSTRATION |
#SEBP26990135
9G-7641: SWITCH GP-START
9G-7641 SWITCH GP-START -ENGINE, KEY
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 145-1862, 183-4856 WIRING GP-CONSOLE
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 145-1862, 183-4856 WIRING GP-CONSOLE
Parts for your 312B L EXCAVATOR:
CATERPILLAR SIS#SEBP26990136
158-2173: WIRING GP-ADJUSTABLE BOOM
158-2173 WIRING GP-ADJUSTABLE BOOM
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 160-7571, 174-4853, 203-0016 LINES GP-PILOT
AN ATTACHMENT
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
PART OF 160-7571, 174-4853, 203-0016 LINES GP-PILOT
AN ATTACHMENT
Parts for your 312B L EXCAVATOR:
CATERPILLAR SIS#SEBP26990137
144-2138: WIRING GP-BOOM
144-2138 WIRING GP-BOOM
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
BOOM LOWERING
PART OF 142-8033, 188-6420 VALVE AR-BOOM LOWERING CONTROL
AN ATTACHMENT
S/N 9FS1-UP; 2KW1-UP; 6SW1-UP; 9NW1-UP
BOOM LOWERING
PART OF 142-8033, 188-6420 VALVE AR-BOOM LOWERING CONTROL
AN ATTACHMENT
Parts for your 312B L EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 132-1828 | [1] | SWITCH AS-ROCKER | |
116-0173 | [1] | CONNECTOR-RECEPTACLE | ||
116-0174 | [4] | TERMINAL | ||
2. | 113-4683 | [1] | ALARM AS | |
3. | 8T-4777 M | [1] | SCREW-MACHINE (M5X0.8X12-MM) | |
4. | 144-3080 | [1] | HARNESS AS | |
5. | 6D-3479 | [2] | CLIP (LOOP) | |
6. | 116-0118 | [1] | CLIP | |
7. | 9X-2027 | [1] | WASHER (11X18X2-MM THK) | |
8. | 129-3181 M | [1] | BOLT-SOCKET HEAD (M10X1.5X55-MM) | |
9. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
10. | 144-2556 | [1] | BRACKET AS | |
11. | 8T-0334 | [2] | WASHER-HARD (6.6X12.5X1.6-MM THK) | |
12. | 132-7551 | [1] | SPACER (11X19X6-MM THK) | |
M | METRIC PART |
#SEBP26990138
144-2713: WIRING GP-CAB
#SEBP26990139
145-1860: WIRING GP-CONSOLE
145-1860 WIRING GP-CONSOLE
S/N 9FS1-630; 2KW1-UP; 6SW1-418; 9NW1-UP
PART OF 141-5665 OPERATOR AR
S/N 9FS1-630; 2KW1-UP; 6SW1-418; 9NW1-UP
PART OF 141-5665 OPERATOR AR
Parts for your 312B L EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Engine News
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Systems Operation
Reuse And Salvage Guidelines
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Information Release Memo
REMANUFACTURED STARTER AND ALTERNATOR FOR VARIOUS 3054, 3054B & 3056 INDUSTRIAL ENGINE AND MACHINE APPLICATIONS
REMANUFACTURED STARTER AND ALTERNATOR FOR VARIOUS 3054, 3054B & 3056 INDUSTRIAL ENGINE AND MACHINE APPLICATIONS
REMANUFACTURED STARTER AND ALTERNATOR FOR VARIOUS 3054, 3054B & 3056 INDUSTRIAL ENGINE AND MACHINE APPLICATIONS
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 312B L :
Truck sale:
CATERPILLAR 312BL 1998
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan