AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

144-2276 WIRING GP-RELAY PANEL S/N 3JW1-UP PART OF 145-9301 WIRING GP-MACHINE 950G WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

WHEEL LOADER 950G WHEEL LOADER 3JW
 950G Wheel Loader 3JW00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2700 950G 3JW   (1998)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-MACHINE
145-9301 WIRING GP-MACHINE
WIRING GP-MACHINE
145-9301 WIRING GP-MACHINE
WIRING GP-RELAY PANEL
144-2276 WIRING GP-RELAY PANEL
WIRING GP-SECONDARY STEERING
154-2804 WIRING GP-SECONDARY STEERING
WIRING GP-SECONDARY STEERING
154-2804 WIRING GP-SECONDARY STEERING
WIRING GP-SENSOR
149-0249 WIRING GP-SENSOR
 

#SEBP27000260
 

144-2276: WIRING GP-RELAY PANEL

144-2276 WIRING GP-RELAY PANEL
S/N 3JW1-UP
PART OF 145-9301 WIRING GP-MACHINE
i00750297 SEBP2700
1442276 WIRING GP-RELAY PANEL Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0075 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY)  
2. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
3. 3K-8782 [4] FUSE (10-AMPERE)  
4. 3S-2093 [7] STRAP-CABLE  
5. 4B-2049 [2] NUT (10-32-THD)  
6. 4K-5122 [4] HOLDER AS-FUSE  
    (EACH INCLUDES)
  139-0178 [1] CAP  
7. 7V-9275 [1] STRAP  
8. 8T-6411 M [7] SCREW-MACHINE (M6X1X12-MM)  
9. 9H-1958 [1] CIRCUIT BREAKER GP (20-AMPERE)(TILT HOOD)  
10. 167-0138 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(MAIN POWER RELAY)  
11. 121-1023 [1] BLOCK-TERMINAL  
12. 125-1302 [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
13. 130-5300 [1] CLIP  
14. 130-7068 [1] PLATE-INSTRUCTION  
15. 130-7070 [1] PLATE-INSTRUCTION  
16. 144-2256 [1] BOX AS  
  6V-9632 M [9] NUT-WELD (M6X1-THD)  
  7T-1099 [3] LINK  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  8R-2186 M [1] BOSS (M10X1.5X40-MM)  
  9R-2821 M [4] BOSS (M10X1.5X15-MM)  
17. 144-2257 [1] PLATE  
18. 147-2079 [1] HARNESS AS-BOX (RELAY)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  8T-8737 [1] PLUG-SEAL  
19. 147-2080 [1] HARNESS AS-BOX (FUSES, LIGHTS, HOOD, BREAKERS)  
20. 147-2083 [1] CABLE AS  
21. 166-3423 [1] CABLE AS  
22. 147-2085 [1] CABLE AS  
23. 147-2086 [1] CABLE AS  
24. 147-2087 [1] WIRE AS  
25. 166-2834 [1] CABLE AS  
26. 147-2089 [1] CABLE AS  
27. 147-2090 [1] WIRE AS  
28. 149-2612 [1] RELAY AS (24-VOLT)(TILT HOOD)  
29. 4B-4274 [6] WASHER (5.5X13X1.2-MM THK)  
30. 5C-2890 M [2] NUT (M6X1-THD)  
31. 5C-9553 M [11] BOLT (M6X1X16-MM)  
32. 5L-4507 [6] SCREW-MACHINE (10-32X0.875-IN)  
33. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
35. 8T-4205 [13] WASHER-HARD (7.2X14.5X2-MM THK)  
36. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
37. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS)  
38. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
39. 9X-8486 [2] SCREW-MACHINE (8-32X0.75-IN)  
40. 9S-4693 [1] CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)  
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
41. 184-7435 [1] PLATE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27000261
 

154-2804: WIRING GP-SECONDARY STEERING

154-2804 WIRING GP-SECONDARY STEERING
S/N 3JW1-UP
PART OF 141-2800 STEERING AR-SECONDARY
Type 1
i00748762 SEBP2700
1542804 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6450 [1] SWITCH AS-PRESSURE (SECONDARY STEERING)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
3. 8R-1460 [1] CABLE AS  
4. 116-4491 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
5. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  3E-5494 [1] DIODE-RECTIFIER  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 118-6878 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 130-5300 [2] CLIP  
8. 139-2599 [1] RELAY (SECONDARY STEERING MOTOR)  
9. 3S-2093 [11] STRAP-CABLE  
10. 154-2809 [1] HARNESS AS-STEERING (SECONDARY)  
11. 154-2810 [1] CABLE AS  
12. 155-0621 [1] CABLE AS  
13. 3K-0360 [2] SEAL-O-RING  
14. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
15. 4D-9517 [3] CLIP  
16. 5C-8312 M [2] NUT (M4X0.7-THD)  
17. 8M-2770 [3] CLIP (LOOP)  
18. 8M-2772 [1] CLIP (LOOP)  
19. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
21. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-4244 M [1] NUT (M12X1.75-THD)  
23. 8T-9405 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
24. 3E-6450 [1] SWITCH AS-PRESSURE (PRIMARY STEERING)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
25. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP27000262
 

154-2804: WIRING GP-SECONDARY STEERING

154-2804 WIRING GP-SECONDARY STEERING
S/N 3JW1-UP
PART OF 141-2800 STEERING AR-SECONDARY
Type 2
i01237834 SEBP2700
1542804 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6450 [1] SWITCH AS-PRESSURE (SECONDARY STEERING)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
3. 8R-1460 [1] CABLE AS  
5. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  3E-5494 [1] DIODE-RECTIFIER  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 118-6878 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 130-5300 [2] CLIP  
8. 139-2599 [1] RELAY (SECONDARY STEERING MOTOR)  
9. 3S-2093 [11] STRAP-CABLE  
10. 154-2809 [1] HARNESS AS-STEERING (SECONDARY)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
11. 154-2810 [1] CABLE AS  
12. 155-0621 [1] CABLE AS  
13. 3K-0360 [2] SEAL-O-RING  
14. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
15. 4D-9517 [3] CLIP  
16. 5C-8312 M [2] NUT (M4X0.7-THD)  
17. 8M-2770 [3] CLIP (LOOP)  
18. 8M-2772 [1] CLIP (LOOP)  
19. 8T-4121 C [4] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4137 CM [4] BOLT (M10X1.5X20-MM)  
21. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-4244 M [1] NUT (M12X1.75-THD)  
23. 8T-9405 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
24. 3E-6450 [1] SWITCH AS-PRESSURE (PRIMARY STEERING)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
25. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP27000263
 

149-0249: WIRING GP-SENSOR

149-0249 WIRING GP-SENSOR
S/N 3JW1-UP
PAYLOAD CONTROL
PART OF 149-0248 MONITOR AR-PAYLOAD
Type 1
i00681984 SEBP2700
1490249 WIRING GP-SENSOR Parts scheme 1490249 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3429 [1] RING-RETAINING  
2. 2L-6726 [1] RING-RETAINING  
3. 4E-2250 [1] HOUSING  
4. 4E-2453 [1] SHAFT  
5. 4E-7088 [1] LEVER  
6. 6D-3025 [2] BALL BEARING  
7. 6V-0852 [1] CAP-DUST  
8. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
9. 7I-3236 [1] SUPPORT AS  
10. 7X-7662 [1] ROD END  
11. 8C-5607 [6] MOUNT-ISOLATION  
12. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
13. 9R-4921 I [1] HOSE AS  
14. 121-0284 Y [1] SENSOR GP-POSITION (LIFT)  
15. 122-2222 [1] ADAPTER  
16. 124-4592 [1] ROD END  
17. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYL HEAD END OIL)  
18. 125-0901 [1] ROD  
19. 127-5778 [1] TEE-O-RING PORT  
20. 130-5300 [1] CLIP  
21. 132-1451 [1] BRACKET AS  
  110-2023 M [1] STUD-WELD (M10X1.5X25-MM)  
22. 163-0094 [1] ARM-BAIL  
23. 147-2764 [1] HARNESS AS-SENSOR (LIFT CYLINDER HEAD END OIL)  
24. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
25. 3J-1907 [3] SEAL-O-RING  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 5C-2890 M [3] NUT (M6X1-THD)  
28. 5C-7261 M [1] NUT (M8X1.25-THD)  
29. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
30. 5P-9085 [2] CLIP (LOOP)  
31. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
32. 6V-8185 [2] NUT (1/4-20-THD)  
33. 6V-8397 [4] SEAL-O-RING  
34. 6V-8636 [1] CONNECTOR  
35. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
36. 6V-9850 [1] ELBOW  
37. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [4] NUT (M10X1.5-THD)  
39. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
40. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
41. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
45. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27000264
 

149-0249: WIRING GP-SENSOR

149-0249 WIRING GP-SENSOR
S/N 3JW1-UP
PAYLOAD CONTROL
PART OF 149-0248 MONITOR AR-PAYLOAD
Type 2
i00997605 SEBP2700
1490249 WIRING GP-SENSOR Parts scheme 1490249 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3429 [1] RING-RETAINING  
2. 2L-6726 [1] RING-RETAINING  
3. 4E-2250 [1] HOUSING  
4. 4E-2453 [1] SHAFT  
5. 4E-7088 [1] LEVER  
6. 6D-3025 [2] BALL BEARING  
7. 6V-0852 [1] CAP-DUST  
8. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
9. 7I-3236 [1] SUPPORT AS  
10. 7X-7662 [1] ROD END  
11. 8C-5607 [6] MOUNT-ISOLATION  
12. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
13. 9R-4921 I [1] HOSE AS  
14. 161-8904 CY [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
15. 122-2222 [1] ADAPTER  
16. 124-4592 [1] ROD END  
17. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYL HEAD END OIL)  
18. 125-0901 [1] ROD  
19. 127-5778 [1] TEE-O-RING PORT  
20. 130-5300 [1] CLIP  
21. 132-1451 [1] BRACKET AS  
  110-2023 M [1] STUD-WELD (M10X1.5X25-MM)  
22. 163-0094 [1] ARM-BAIL  
23. 147-2764 [1] HARNESS AS-SENSOR (LIFT CYLINDER HEAD END OIL)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS & WEDGE)
  8T-8737 [1] PLUG-SEAL  
24. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
25. 3J-1907 [3] SEAL-O-RING  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 5C-2890 M [3] NUT (M6X1-THD)  
28. 5C-7261 M [1] NUT (M8X1.25-THD)  
29. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
30. 5P-9085 [2] CLIP (LOOP)  
31. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
32. 6V-8185 [2] NUT (1/4-20-THD)  
33. 6V-8397 [4] SEAL-O-RING  
34. 6V-8636 [1] CONNECTOR  
35. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
36. 6V-9850 [1] ELBOW  
37. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [4] NUT (M10X1.5-THD)  
39. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
40. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
41. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
45. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27000265
 

149-0249: WIRING GP-SENSOR

149-0249 WIRING GP-SENSOR
S/N 3JW1-UP
PAYLOAD CONTROL
PART OF 149-0248 MONITOR AR-PAYLOAD
Type 3
i01732188 SEBP2700
1490249 WIRING GP-SENSOR Parts scheme 1490249 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3429 [1] RING-RETAINING  
2. 2L-6726 [1] RING-RETAINING  
3. 168-0402 C [1] HOUSING  
4. 168-8774 C [1] SHAFT  
5. 4E-7088 [1] LEVER  
6. 6D-3025 [2] BALL BEARING  
7. 6V-0852 [1] CAP-DUST  
8. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
9. 7I-3236 [1] SUPPORT AS  
10. 7X-7662 [1] ROD END  
11. 8C-5607 [6] MOUNT-ISOLATION  
12. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
13. 9R-4921 I [1] HOSE AS  
14. 161-8904 CY [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
15. 122-2222 [1] ADAPTER  
16. 124-4592 [1] ROD END  
17. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYL HEAD END OIL)  
18. 125-0901 [1] ROD  
19. 127-5778 [1] TEE-O-RING PORT  
20. 130-5300 [1] CLIP  
21. 132-1451 [1] BRACKET AS  
  110-2023 M [1] STUD-WELD (M10X1.5X25-MM)  
22. 163-0094 [1] ARM-BAIL  
23. 147-2764 [1] HARNESS AS-SENSOR (LIFT CYLINDER HEAD END OIL)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS & WEDGE)
  8T-8737 [1] PLUG-SEAL  
24. 125-0380 M [1] NUT-HEX (M8X1.25-THD, LH)  
25. 3J-1907 [3] SEAL-O-RING  
26. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
27. 5C-2890 M [3] NUT (M6X1-THD)  
28. 5C-7261 M [1] NUT (M8X1.25-THD)  
29. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
30. 5P-9085 [2] CLIP (LOOP)  
31. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
32. 6V-8185 [2] NUT (1/4-20-THD)  
33. 6V-8397 [4] SEAL-O-RING  
34. 6V-8636 [1] CONNECTOR  
35. 6V-9189 M [1] LOCKNUT (M8X1.25-THD)  
36. 6V-9850 [1] ELBOW  
37. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [4] NUT (M10X1.5-THD)  
39. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
40. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
41. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
45. 9X-2480 M [3] BOLT (M6X1X45-MM)  
46. 6V-0894 C [1] SEAL-O-RING  
47. 166-2232 C [1] SEAL-LIP TYPE  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP27000266
 

112-0768: AXLE AR-FIXED

112-0768 AXLE AR-FIXED
S/N 3JW1-UP
FRONT
PART OF 112-6984 POWER TRAIN AR
i00962274 SEBP2700
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-0757 Y [2] BRAKE & PLANETARY GP  
  143-9514 Y [1] DIFFERENTIAL GP  
    S/N 3JW1-577
  137-1392 Y [1] DIFFERENTIAL GP  
    S/N 3JW578-UP
  112-0738 Y [1] GEAR GP-BEVEL & PINION  
  112-0769 Y [1] HOUSING GP-FIXED AXLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27000267
 

126-7843: AXLE AR-FIXED

126-7843 AXLE AR-FIXED -LIMITED SLIP
S/N 3JW1-UP
DIRECT OPERATED
i00515148 SEBP2700
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-0757 Y [2] BRAKE & PLANETARY GP  
  144-4465 Y [1] DIFFERENTIAL GP-LIMITED SLIP  
  112-0738 Y [1] GEAR GP-BEVEL & PINION  
  112-0769 Y [1] HOUSING GP-FIXED AXLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27000268
 

138-3122: AXLE AR-FIXED

138-3122 AXLE AR-FIXED -LOGGING-FRONT, STANDARD DIFFERENTIAL
S/N 3JW1-UP
PART OF 147-5142 LOGGING AR
i00982366 SEBP2700
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-0757 Y [2] BRAKE & PLANETARY GP  
    -OR-
  164-3018 Y [2] BRAKE & PLANETARY GP  
  137-1392 Y [1] DIFFERENTIAL GP  
  112-0738 Y [1] GEAR GP-BEVEL & PINION  
  112-0769 Y [1] HOUSING GP-FIXED AXLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP27000269
 

157-0338: AXLE AR-FIXED

157-0338 AXLE AR-FIXED
S/N 3JW1-UP
LIMITED SLIP
i00797481 SEBP2700
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-0757 Y [2] BRAKE & PLANETARY GP  
  144-4465 Y [1] DIFFERENTIAL GP-LIMITED SLIP  
  Y [1] GEAR GP-BEVEL & PINION  
  112-0769 Y [1] HOUSING GP-FIXED AXLE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950G :

WIRING GP-MACHINE
145-9301 WIRING GP-MACHINE
WIRING GP-MACHINE
145-9301 WIRING GP-MACHINE
WIRING GP-FRONT
148-5662 WIRING GP-FRONT
WIRING GP-ENGINE
112-6981 WIRING GP-ENGINE
WIRING GP-ELECTRIC CLUTCH
156-1105 WIRING GP-ELECTRIC CLUTCH
WIRING GP-ELECTRIC CLUTCH
156-1105 WIRING GP-ELECTRIC CLUTCH
WIRING GP-CAB
154-8769 WIRING GP-CAB
WIRING GP-CAB
154-8769 WIRING GP-CAB
WIRING GP-SECONDARY STEERING
154-2804 WIRING GP-SECONDARY STEERING
WIRING GP-SECONDARY STEERING
154-2804 WIRING GP-SECONDARY STEERING
WIRING GP-SENSOR
149-0249 WIRING GP-SENSOR
WIRING GP-SENSOR
149-0249 WIRING GP-SENSOR
WIRING GP-SENSOR
149-0249 WIRING GP-SENSOR
112-0768 AXLE AR-FIXED
126-7843 AXLE AR-FIXED
138-3122 AXLE AR-FIXED

Truck sale:

Caterpillar 950G
 
Caterpillar 950G
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
129,900 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 950GC, Wheel Loaders, Construction
185,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Caterpillar 950GC, Wheel Loaders, Construction
190,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
215,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.