OPERATOR STATION
CONTROL GP-STEERINGSUPPORT GP
SUPPRESSION GP
SEAT GP
OPERATOR STATION
CONTROL GP-STEERING
#SEBP27000770
297-4926: STEERING COLUMN GP-ADJUSTABLE
297-4926 STEERING COLUMN GP-ADJUSTABLE
S/N 3JW1-UP
PART OF 141-8802 CONTROL GP-STEERING
S/N 3JW1-UP
PART OF 141-8802 CONTROL GP-STEERING
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 332-6885 | [1] | KIT-CONTACT (GROUND) | |
| (INCLUDES HORN CONTACT AS (BLACK WIRE) & SCREWS) | ||||
| 2. | 332-6817 | [1] | KIT-CONTACT | |
| (INCLUDES HORN CONTACT AS (BLUE WIRE) & SCREWS) | ||||
| 3. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| 4. | 319-9511 | [1] | KIT-GAS SPRING | |
| (INCLUDES ONE GAS STRUT) | ||||
| 5. | 271-9109 | [1] | KIT-TILT LEVER | |
| (INCLUDES BOLTS, DOWEL, SPRING & TILT LEVER) | ||||
| 6. | 325-4636 | [1] | KIT-PIVOT | |
| (INCLUDES BUSHINGS & PINS) | ||||
| M | METRIC PART | |||
#SEBP27000771
142-0874: SUPPORT GP-HYDRAULIC CONTROL
142-0874 SUPPORT GP-HYDRAULIC CONTROL
S/N 3JW1-UP
PART OF 146-3285 CAB AR-ENCLOSED ROPS, 154-7721 CANOPY AR-OPEN ROPS
S/N 3JW1-UP
PART OF 146-3285 CAB AR-ENCLOSED ROPS, 154-7721 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-1062 | [1] | CUSHION AS-ARMREST | |
| 2. | 5P-5454 | [1] | ASHTRAY | |
| 3. | 5P-5824 | [1] | HOLDER | |
| 4. | 8C-3426 J | [1] | LOCK GP-CYLINDER | |
| 4A. | 7F-9223 | [1] | LOCKWASHER | |
| 4B. | 8T-5004 | [1] | SCREW-MACHINE (1/4-28X0.375-IN) | |
| 5. | 9W-0335 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
| 6. | 162-7285 | [1] | SUPPORT AS | |
| 6A. | 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | |
| 7. | 111-7875 | [1] | PLATE | |
| 8. | 118-8568 | [1] | LEVER | |
| 9. | 125-7045 | [1] | COVER AS | |
| 10. | 125-7046 | [1] | PLATE AS | |
| 11. | 128-7380 | [1] | COVER AS | |
| 12. | 142-0433 | [1] | COVER | |
| 13. | 172-6478 | [1] | SUPPORT AS | |
| 13A. | 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | |
| 14. | 172-6479 | [1] | SUPPORT AS | |
| 15. | 144-4303 | [1] | SUPPORT AS | |
| 15A. | 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | |
| 15B. | 7T-1099 | [1] | LINK | |
| 15C. | 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | |
| 16. | 173-2384 | [1] | BOX AS | |
| 17. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 18. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 20. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 21. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 22. | 9X-2041 M | [15] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 23. | 9X-2042 M | [14] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 24. | 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 25. | 5P-5637 BE | SEAL | ||
| 28. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 29. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 30. | 149-2582 | [1] | PLATE AS | |
| 31. | 187-1878 | [1] | WASHER-PLASTIC (8.1X19X3.2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES 5P8500 KEY | |||
| M | METRIC PART | |||
#SEBP27000772
160-6236: SUPPORT GP-HYDRAULIC CONTROL
160-6236 SUPPORT GP-HYDRAULIC CONTROL
S/N 3JW1-UP
PART OF 154-7721 CANOPY AR-OPEN ROPS
S/N 3JW1-UP
PART OF 154-7721 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-4509 | [1] | PLATE | |
| 2. | 4E-1062 | [1] | CUSHION AS-ARMREST | |
| 3. | 5P-5454 | [1] | ASHTRAY | |
| 4. | 5P-5824 | [1] | HOLDER | |
| 5. | 9R-2620 | [1] | PLUG | |
| 6. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 7. | 162-7285 | [1] | SUPPORT AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 8. | 111-7875 | [1] | PLATE | |
| 9. | 118-8568 | [1] | LEVER | |
| 10. | 128-7380 | [1] | COVER AS | |
| 11. | 142-0433 | [1] | COVER | |
| 12. | 172-6479 | [1] | SUPPORT AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [2] | LINK | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 13. | 144-4303 | [1] | SUPPORT AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [1] | LINK | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 14. | [1] | ANGLE | ||
| 15. | 171-4544 | [1] | PLATE | |
| 16. | [1] | PLATE AS | ||
| 17. | 161-9681 | [1] | COVER | |
| 18. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 20. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 21. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 22. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 23. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 24. | 9X-2041 M | [19] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 25. | 9X-2042 M | [6] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 26. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 27. | 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 28. | 5P-5637 E | SEAL (40.9CM) | ||
| 29. | 5P-5637 E | SEAL (27.9CM) | ||
| 30. | 5P-5637 E | SEAL (42.1CM) | ||
| 31. | 187-1878 | [1] | WASHER-PLASTIC (8.1X19X3.2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP27000773
149-8034: SUPPRESSION GP-CAB SOUND
149-8034 SUPPRESSION GP-CAB SOUND
S/N 3JW1-1084
PART OF 146-3285 CAB AR-ENCLOSED ROPS
S/N 3JW1-1084
PART OF 146-3285 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS#SEBP27000774
150-7718: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-7884 | [2] | BEARING | |
| 2. | 3H-5841 | [1] | BOLT (3/8-16X1-IN) | |
| 3. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 4. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 5. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 6. | 8Y-6917 | [1] | BOOT | |
| 7. | 102-6317 | [2] | BUMPER | |
| 8. | 124-7128 | [1] | BUSHING-RELIEF | |
| 9. | 9M-0164 | [1] | CLAMP-HOSE | |
| 10. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 11. | 147-4549 | [1] | FITTING-ELBOW | |
| 12. | 149-2400 | [1] | FITTING | |
| 13. | 149-2399 | [1] | FITTING | |
| 14. | 8Y-6922 | [1] | HOUSING AS | |
| 15. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 16. | 3J-4818 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 17. | 1B-4430 | [4] | NUT-JAM (1/2-20-THD) | |
| 18. | 124-7126 | [1] | SCISSORS AS | |
| 19. | 8M-3267 | [1] | SCREW-HEX SOCKET (3/8-16X0.75-IN) | |
| 20. | 123-8157 | [2] | SHAFT | |
| 21. | 123-9131 | [1] | ABSORBER AS-SHOCK | |
| 22. | 147-6522 | [1] | SPRING | |
| 23. | 6K-0806 | [1] | STRAP-CABLE | |
| 24. | 8L-8413 | [4] | STRAP-CABLE (WHITE) | |
| 25. | 149-2403 | [1] | VALVE AS | |
| 26. | 153-0088 | [3] | WASHER-HARD (10.31X20X1.65-MM THK) | |
| 27. | 147-6541 BE | TUBE | ||
| 28. | 147-6541 BE | TUBE | ||
| 29. | 160-7765 | [1] | WASHER (16.26X22.23X1.97-MM THK) | |
| 30. | 160-7766 | [3] | WASHER (16.26X22.23X0.51-MM THK) | |
| 31. | 160-7767 | [8] | WASHER (3.68X12.57X0.51-MM THK) | |
| 32. | NZ | [4] | BEARING-FLANGED | |
| 33. | NZ | [4] | ROLLER | |
| 34. | NZ | [1] | WRAP-TIE (SMALL) | |
| 35. | JZ | [1] | HOUSING-UPPER | |
| 36. | JZ | [1] | BRACKET-RH | |
| 37. | PZ | [2] | TETHER | |
| 38. | LZ | [30] | CLIP (RATCHET) | |
| 39. | SZ | [1] | COMPRESSOR AS | |
| 40. | SZ | [1] | SLEEVE ((190.5MMX12.7MM DIA)) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-6928 L | [1] | KIT-FASTENER | ||
| 123-9128 N | [1] | KIT-ROLLER | ||
| 124-7125 J | [1] | KIT-HOUSING | ||
| 128-0613 P | [1] | KIT-TETHER | ||
| 149-2398 S | [1] | KIT-AIR COMPRESSOR | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| L | KIT MARKED L INCLUDES PART(S) MARKED L | |||
| N | KIT MARKED N INCLUDES PART(S) MARKED N | |||
| P | KIT MARKED P INCLUDES PART(S) MARKED P | |||
| S | KIT MARKED S INCLUDES PART(S) MARKED S | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP27000775
150-7718: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-7884 | [2] | BEARING | |
| 2. | 166-7223 C | [1] | HOUSING AS | |
| 3. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 4. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 6. | 8Y-6917 | [1] | BOOT | |
| 7. | 102-6317 | [2] | BUMPER | |
| 8. | 124-7128 | [1] | BUSHING-RELIEF | |
| 9. | 9M-0164 | [1] | CLAMP-HOSE | |
| 10. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 11. | 147-4549 | [1] | FITTING-ELBOW | |
| 12. | 149-2400 | [1] | FITTING | |
| 13. | 149-2399 | [1] | FITTING | |
| 14. | 8Y-6922 | [1] | HOUSING AS | |
| 15. | 2K-4973 C | [1] | LOCKNUT (3/8-16-THD) | |
| 16. | 3J-4818 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 17. | 1B-4430 | [4] | NUT-JAM (1/2-20-THD) | |
| 18. | 124-7126 | [1] | SCISSORS AS | |
| 19. | 8M-3267 | [1] | SCREW-HEX SOCKET (3/8-16X0.75-IN) | |
| 20. | 123-8157 | [2] | SHAFT | |
| 21. | 123-9131 | [1] | ABSORBER AS-SHOCK | |
| 22. | 147-6522 | [1] | SPRING | |
| 23. | 6K-0806 | [1] | STRAP-CABLE | |
| 24. | 8L-8413 | [4] | STRAP-CABLE (WHITE) | |
| 25. | 149-2403 | [1] | VALVE AS (SUSPENSION SEAT) | |
| 26. | 160-7767 B | [6] | WASHER (3.68X12.57X0.51-MM THK) | |
| 27. | 147-6541 E | TUBE (29-CM) | ||
| 27A. | 147-6541 E | TUBE (9-CM) | ||
| 28. | 160-7765 B | [1] | WASHER (16.26X22.23X1.97-MM THK) | |
| 29. | 160-7766 B | [6] | WASHER (16.26X22.23X0.51-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-6928 | [1] | KIT-FASTENER | ||
| (INCLUDES RATCHET CLIPS) | ||||
| 123-9128 | [1] | KIT-ROLLER | ||
| (INCLUDES FLANGED BEARINGS, ROLLERS, & TIE WRAP) | ||||
| 128-0613 | [1] | KIT-TETHER | ||
| 149-2398 | [1] | KIT-AIR COMPRESSOR | ||
| (INCLUDES COMPRESSOR AS & SLEEVE) | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP27000776
172-9444: SUSPENSION GP-SEAT
172-9444 SUSPENSION GP-SEAT -AIR
S/N 3JW1-UP
24-VOLT
PART OF 178-7916 SEAT GP-SUSPENSION
FIELD REPLACEMENT ORDER @@@@@191-2933@@@@@
S/N 3JW1-UP
24-VOLT
PART OF 178-7916 SEAT GP-SUSPENSION
FIELD REPLACEMENT ORDER @@@@@191-2933@@@@@
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-4818 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 2. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 3. | 8Y-6917 | [1] | BOOT | |
| 4. | 102-6317 | [2] | BUMPER | |
| 5. | 123-8157 | [2] | SHAFT | |
| 6. | 123-9131 | [1] | ABSORBER AS-SHOCK | |
| 7. | 124-7126 | [1] | SCISSORS AS | |
| 8. | 124-7128 | [1] | BUSHING-RELIEF | |
| 9. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 10. | 147-4549 | [1] | FITTING-ELBOW | |
| 11. | 147-6522 | [1] | SPRING | |
| 12. | 149-2399 | [1] | FITTING | |
| 13. | 149-2400 | [1] | FITTING | |
| 14. | 149-2403 | [1] | VALVE AS | |
| 15. | 160-7765 | [1] | WASHER (16.26X22.23X1.97-MM THK) | |
| 16. | 160-7766 B | [3] | WASHER (16.26X22.23X0.51-MM THK) | |
| 17. | 160-7767 B | [8] | WASHER (3.68X12.57X0.51-MM THK) | |
| 18. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 19. | 171-4045 | [1] | HOUSING AS | |
| 20. | 1B-4430 | [4] | NUT-JAM (1/2-20-THD) | |
| 21. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 22. | 4V-7884 | [2] | BEARING | |
| 23. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 24. | 6K-0806 | [1] | STRAP-CABLE | |
| 25. | 8L-8413 | [4] | STRAP-CABLE (WHITE) | |
| 26. | 8M-3267 | [1] | SCREW-HEX SOCKET (3/8-16X0.75-IN) | |
| 27. | 8Y-6922 | [1] | HOUSING AS | |
| 28. | 9M-0164 | [1] | CLAMP-HOSE | |
| 29. | 147-6541 E | TUBE (29.4-CM) | ||
| 29A. | 147-6541 E | TUBE (0.9-CM) | ||
| 203-7700 F | [1] | BOLT (3/8-16-THD) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 149-2398 | [1] | KIT-AIR COMPRESSOR | ||
| (INCLUDES COMPRESSOR AS & SLEEVE) | ||||
| 8Y-6928 | [1] | KIT-FASTENER | ||
| (INCLUDES CLIPS-RATCHET) | ||||
| 123-9128 | [1] | KIT-ROLLER | ||
| (INCLUDES BEARINGS-FLANGED, ROLLERS, & TIE WRAP (SMALL)) | ||||
| 128-0613 | [1] | KIT-TETHER | ||
| (INCLUDES TETHER) | ||||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
#SEBP27000777
191-2933: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 101-0003 | [33] | FASTENER | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 9. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 192-7760 | [1] | SHAFT | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 192-7805 | [1] | HARNESS AS-VALVE (SEAT AIR COMPRESSOR) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 211-5358 E | CONDUIT-FLEXIBLE (64-CM) | |||
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 192-7822 | [1] | SHAFT | |
| 23. | 237-3943 | [1] | BRACKET | |
| 24. | 237-3970 Y | [1] | AIR COMPRESSOR GP-SEAT | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 30A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 31. | 5P-6010 D | TUBE (0.267-M) | ||
| 31A. | 5P-6010 D | TUBE (0.356-M) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SUSPENSION SEAT) | ||
| (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING) | ||||
| 192-7848 B | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS) | ||||
| 211-9294 | [1] | KIT-TETHER (SUSPENSION SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 213-5170 AB | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7779 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(ADJUSTABLE SEAT) | ||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27000778
191-2933: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 101-0003 | [26] | FASTENER | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 9. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 192-7805 | [1] | HARNESS AS-VALVE (SEAT AIR COMPRESSOR) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 211-5358 E | CONDUIT-FLEXIBLE (64-CM) | |||
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 | [1] | SHAFT (OUTER) | |
| 23. | 372-2158 C | [1] | BRACKET-MOUNTING | |
| 24. | 370-9894 C | [1] | COMPRESSOR AS | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 30A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 31. | 5P-6010 D | TUBE (0.27-M) | ||
| 31A. | 5P-6010 D | TUBE (0.36-M) | ||
| 32. | 387-0314 C | [1] | WIRE AS (16-GA, ORANGE) | |
| 33. | 387-0317 C | [1] | WIRE AS (16-GA, BLACK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SUSPENSION SEAT) | ||
| (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING) | ||||
| 192-7848 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS) | ||||
| 211-9294 | [1] | KIT-TETHER (SUSPENSION SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 213-5170 AB | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7779 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(ADJUSTABLE SEAT) | ||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP27000779
191-2933: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 5. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 6. | 164-1234 | [1] | PLATE | |
| 7. | 101-0003 | [26] | FASTENER | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 433-5754 CY | [1] | HARNESS AS-WIRING (SEAT AIR COMPRESSOR) | |
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 163-1135 | [1] | SPRING | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 | [1] | SHAFT (OUTER) | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 30. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 30A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 31. | 5P-6010 D | TUBE (0.27-M) | ||
| 31A. | 5P-6010 D | TUBE (0.36-M) | ||
| 32. | 442-8151 C | [1] | CLIP-CABLE | |
| 33. | 3S-2093 C | [4] | STRAP-CABLE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SUSPENSION SEAT) | ||
| (INCLUDES KNOB AS, NUT, VALVE, LOCKWASHER & FITTING) | ||||
| 192-7848 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES LOCKNUT, LOCKWASHER, SHOCK ABSORBER, BEARINGS, WASHER & BOLTS) | ||||
| 211-9294 | [1] | KIT-TETHER (SUSPENSION SEAT) | ||
| (INCLUDES TETHERS) | ||||
| 213-5170 AB | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7779 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(ADJUSTABLE SEAT) | ||
| 346-4360 AB | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT)(HEAVY-DUTY) | ||
| (INCLUDES SHOCK ABSORBER, BEARINGS, WASHERS, BOLTS, LOCKNUT, & LOCKWASHER) | ||||
| 397-6405 C | [1] | KIT-SEAT AIR COMPRESSOR (SUSPENSION SEAT) | ||
| (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET & HARNESS ASSEMBLIES) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
