OPERATOR STATION
PANEL GPBRAKING SYSTEM
CONTROL GPOPERATOR STATION
PANEL GP
#SEBP27020760
154-8766: PANEL GP-INSTRUMENT
For full view, you need register
Parts for your 966G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2H-3920 C | [2] | LOCKWASHER | |
| 2. | 3E-0109 | [10] | PLUG (ROCKER SWITCH) | |
| 3. | 3E-5239 C | [4] | RELAY AS (24-VOLT) | |
| 4. | 3E-6328 Y | [1] | ALARM GP (24-VOLT)(ACTION) | |
| 5. | 3E-6389 Y | [2] | LAMP GP-DOME (24-VOLT) | |
| 6. | 3S-2093 | [1] | STRAP-CABLE | |
| 7. | 5S-4245 | [4] | SCREW-MACHINE (4-40X0.5-IN) | |
| 8. | 161-9225 | [1] | PLATE | |
| 9. | 6V-8369 C | [2] | NUT (7/16-28-THD) | |
| 10. | 7N-5876 | [2] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 11. | 9G-8451 | [1] | BLOCK AS | |
| 1H-3244 | [1] | LOCKWASHER | ||
| 4B-4276 | [2] | WASHER (7X16X1.6-MM THK) | ||
| 4L-7124 | [1] | BOLT (1/4-20X1.25-IN) | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 12. | 199-8926 C | [1] | FILM-FUSE (IDENTIFICATION) | |
| 13. | 103-5526 Y | [1] | CONTROL GP-MONITOR (BACKLIGHT DIMMER) | |
| 14. | 104-2091 | [2] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 15. | 108-3320 | [1] | SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING/FLOOD/PANEL/TAIL LIGHT) | |
| 3E-3389 | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | ||
| 9W-0852 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 16. | 275-7741 Y | [1] | SWITCH GP-WIPER (24-VOLT)(FRONT INTERMITTENT) | |
| 17. | 202-8006 C | [1] | BEZEL (RH) | |
| 18. | 112-5420 | [1] | BEZEL (LH) | |
| 19. | 112-5421 | [1] | STRIP | |
| 20. | 185-5382 | [1] | FILM-SWITCH PANEL (RH) | |
| 21. | 112-6174 | [1] | SWITCH GP-ROTARY (WIPER, WASHER)(REAR WIPER) | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 2H-3920 | [1] | LOCKWASHER | ||
| 3E-3389 | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | ||
| 6V-8369 | [1] | NUT (7/16-28-THD) | ||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 22. | 113-0002 | [2] | STRIP AS | |
| (EACH INCLUDES) | ||||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 23. | 116-2246 | [1] | WIRE AS | |
| 24. | 116-2247 | [2] | WIRE AS | |
| 25. | 291-2165 | [1] | POTENTIOMETER AS (TEMPERATURE SELECTOR) | |
| 236-8722 | [1] | WASHER (10.5X22.2X1.6-MM THK) | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 26. | 130-5300 | [1] | CLIP | |
| 27. | 110-6109 C | [6] | KNOB-CONTROL | |
| 28. | 185-6335 C | [1] | SWITCH AS-ROTARY (24-VOLT)(AUTOSHIFT CONTROL) | |
| 28A. | 185-6335 C | [1] | SWITCH AS-ROTARY (24-VOLT)(VARIABLE SHIFT CONTROL) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 29. | 9X-2480 M | [2] | BOLT (M6X1X45-MM) | |
| 30. | 9X-8486 | [4] | SCREW-MACHINE (8-32X0.75-IN) | |
| 31. | 199-4148 C | [1] | HARNESS AS-PANEL (FUSE, REAR CAB) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 3E-5519 | [1] | PLUG AS-CONNECTOR (5-PIN) | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8L-8413 | [17] | STRAP-CABLE (WHITE) | ||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-1054 | [3] | PLUG AS-CONNECTOR (4-PIN) | ||
| 32. | 154-9501 | [1] | PANEL AS | |
| 6V-9632 M | [6] | NUT-WELD (M6X1-THD) | ||
| 33. | 203-4266 C | [1] | PLUG AS-CODE | |
| 5P-5677 D | WIRE (18-GA, BLACK)(6M) | |||
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 34. | 6T-3643 | [1] | CIRCUIT BREAKER AS (15-AMPERE)(SEAT AIR COMPRESSOR) | |
| 34A. | 6T-3643 | [1] | CIRCUIT BREAKER AS (15-AMPERE)(FAN BLOWER MOTOR) | |
| (EACH CIRCUIT BREAKER AS INCLUDES) | ||||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 35. | 200-8446 | [1] | FILM-SWITCH PANEL (RH) | |
| 37. | 188-4804 C | [1] | SWITCH AS-ROCKER (TMSN NEUT OVERRIDE CONT) | |
| 123-6388 | [1] | SWITCH AS | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 3E-9331 | [1] | ACTUATOR | ||
| 38. | 8M-8948 | [1] | FUSE (15-AMPERE)(FLOOD LIGHTS FRONT) | |
| 38A. | 8M-8948 | [1] | FUSE (15-AMPERE)(FLOOD LIGHTS REAR) | |
| 39. | 3E-7155 | [1] | SWITCH AS-ROCKER (HEAT/AC SELECTOR) | |
| 3E-8772 | [1] | SWITCH-ROCKER (24-VOLT) | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 3E-8793 | [1] | ACTUATOR | ||
| 40. | 3E-7156 | [1] | SWITCH AS-ROCKER (FAN BLOWER SPEED) | |
| 3E-8773 | [1] | SWITCH AS-ROCKER | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 3E-8794 | [1] | ACTUATOR | ||
| 41. | 3K-8782 | [1] | FUSE (10-AMPERE)(TRANSMISSION CONTROL) | |
| 41A. | 3K-8782 | [1] | FUSE (10-AMPERE)(SECONDARY STEERING) | |
| 41B. | 3K-8782 | [1] | FUSE (10-AMPERE)(ROTATING BEACON) | |
| 41C. | 3K-8782 | [1] | FUSE (10-AMPERE)(CAT MONITORING SYSTEM CHECK) | |
| 41D. | 3K-8782 | [1] | FUSE (10-AMPERE)(WIPER MOTORS) | |
| 41E. | 3K-8782 | [1] | FUSE (10-AMPERE)(PAYLOAD CONTROL SYSTEM) | |
| 41F. | 3K-8782 | [1] | FUSE (10-AMPERE)(VOLTAGE CONVERSION) | |
| 41G. | 3K-8782 | [1] | FUSE (10-AMPERE)(LIGHT SWITCH) | |
| 41H. | 3K-8782 | [1] | FUSE (10-AMPERE)(IMPLEMENT CONTROL) | |
| 41J. | 3K-8782 | [1] | FUSE (10-AMPERE)(AXLE OIL COOLER) | |
| 41K. | 3K-8782 | [1] | FUSE (10-AMPERE)(CIGAR LIGHTER) | |
| 41L. | 3K-8782 C | [1] | FUSE (10-AMPERE)(QUICK COUPLER) | |
| 42. | 4K-5122 C | [14] | HOLDER AS-FUSE | |
| (EACH INCLUDES) | ||||
| 6T-8115 | [1] | NUT (1/2-24-THD) | ||
| 139-0178 | [1] | CAP | ||
| 43. | 5C-2890 CM | [5] | NUT (M6X1-THD) | |
| 44. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 47. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 48. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 49. | 8T-4205 C | [9] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 50. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 51. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 52. | 8T-4244 M | [3] | NUT (M12X1.75-THD) | |
| 53. | 8T-4970 M | [6] | BOLT (M6X1X14-MM) | |
| 54. | 9G-2673 | [2] | GROMMET | |
| 55. | 9X-1046 M | [18] | SCREW (M4X0.7X18-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27020761
160-9169: PANEL GP-INSTRUMENT
160-9169 PANEL GP-INSTRUMENT -LOWER
S/N 3SW240-675
PART OF 146-3286 CAB AR, 152-7720 CANOPY AR-OPEN ROPS
S/N 3SW240-675
PART OF 146-3286 CAB AR, 152-7720 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 966G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-0109 | [1] | PLUG (ROCKER SWITCH) | |
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 4E-8722 | [7] | NUT (RETAINER) | |
| 4. | 7N-5876 | [11] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 5. | 9W-2111 | [1] | LAMP (24-VOLT) | |
| 6. | 100-5895 Y | [1] | MODULE GP-QUAD GAUGE | |
| 7. | 110-4215 | [1] | BEZEL (CENTER) | |
| 8. | 110-4216 | [1] | BEZEL (RH) | |
| 9. | 110-4217 | [1] | BEZEL (LH) | |
| 10. | 163-7310 | [1] | COVER (RH) | |
| 11. | 112-4211 | [1] | COVER | |
| 12. | 110-4218 | [1] | MODULE AS-LIGHT | |
| 7X-3319 M | [2] | SCREW-HEX SOCKET (M4X0.7X6-MM) | ||
| 112-5928 | [1] | PLATE | ||
| 13. | 153-8061 Y | [1] | MODULE GP-SPEEDOMETER & TACH | |
| 14. | 166-7237 | [1] | CONTROL GP-MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| 15. | 155-8720 | [1] | FILM-MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| 16. | [1] | HARNESS AS-PANEL | ||
| 17. | 162-7092 | [1] | FILM-PANEL (INDICATOR MODULE) | |
| 18. | 112-6171 | [1] | SWITCH AS-ROCKER (OPERATOR MONITOR MODE SELECTOR) | |
| 3E-8768 | [1] | SWITCH AS (24-VOLT) | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 112-6170 | [1] | ACTUATOR | ||
| 19. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 21. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 22. | 9M-8406 | [2] | CLIP (LOOP) | |
| 23. | 9X-1046 M | [24] | SCREW (M4X0.7X18-MM) | |
| 24. | 9X-2042 M | [15] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 25. | 9X-2044 M | [7] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 26. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 27. | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| 28. | 129-7184 | [1] | FILM-INSTRUCTION (ENGINE START) | |
| 29. | 163-6537 | [1] | PLATE AS | |
| 30. | 9X-2038 B | [2] | WASHER (7X19X2-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27020762
160-9169: PANEL GP-INSTRUMENT
160-9169 PANEL GP-INSTRUMENT -LOWER
S/N 3SW676-1224
PART OF 146-3286 CAB AR, 152-7720 CANOPY AR-OPEN ROPS
S/N 3SW676-1224
PART OF 146-3286 CAB AR, 152-7720 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 966G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-0109 | [1] | PLUG (ROCKER SWITCH) | |
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 4E-8722 | [7] | NUT (RETAINER) | |
| 4. | 7N-5876 | [11] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 5. | 9W-2111 | [1] | LAMP (24-VOLT) | |
| 6. | 166-6928 CY | [1] | MODULE GP-QUAD GAUGE | |
| 7. | 110-4215 | [1] | BEZEL (CENTER) | |
| 8. | 110-4216 | [1] | BEZEL (RH) | |
| 9. | 110-4217 | [1] | BEZEL (LH) | |
| 10. | 163-7310 | [1] | COVER (RH) | |
| 11. | 188-3119 | [1] | COVER (LH) | |
| 12. | 110-4218 | [1] | MODULE AS-LIGHT | |
| 7X-3319 M | [2] | SCREW-HEX SOCKET (M4X0.7X6-MM) | ||
| 112-5928 | [1] | PLATE | ||
| 13. | 153-8061 Y | [1] | MODULE GP-SPEEDOMETER & TACH | |
| 14. | 171-5342 C | [1] | CONTROL GP-MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| 15. | 155-8720 | [1] | FILM-MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| 16. | [1] | HARNESS AS-PANEL | ||
| 17. | 162-7092 | [1] | FILM-PANEL (INDICATOR MODULE) | |
| 18. | 112-6171 | [1] | SWITCH AS-ROCKER (OPERATOR MONITOR MODE SELECTOR) | |
| 3E-8768 | [1] | SWITCH AS (24-VOLT) | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 112-6170 | [1] | ACTUATOR | ||
| 19. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 21. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 22. | 9M-8406 | [2] | CLIP (LOOP) | |
| 23. | 9X-1046 M | [24] | SCREW (M4X0.7X18-MM) | |
| 24. | 9X-2042 M | [15] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 25. | 9X-2044 M | [7] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 26. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 27. | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| 28. | 129-7184 | [1] | FILM-INSTRUCTION (ENGINE START) | |
| 29. | 163-6537 | [1] | PLATE AS | |
| 30. | 9X-2038 B | [2] | WASHER (7X19X2-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27020763
160-9169: PANEL GP-INSTRUMENT
For full view, you need register
Parts for your 966G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-0109 | [1] | PLUG (ROCKER SWITCH) | |
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 4E-8722 | [7] | NUT (RETAINER) | |
| 4. | 7N-5876 | [11] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 5. | 9W-2111 | [1] | LAMP (24-VOLT) | |
| 6. | 166-6928 Y | [1] | MODULE GP-QUAD GAUGE | |
| 7. | 110-4215 | [1] | BEZEL (CENTER) | |
| 8. | 110-4216 | [1] | BEZEL (RH) | |
| 9. | 110-4217 | [1] | BEZEL (LH) | |
| 10. | 163-7310 | [1] | COVER (RH) | |
| 11. | 188-3119 | [1] | COVER (LH) | |
| 12. | 110-4218 | [1] | MODULE AS-LIGHT | |
| 7X-3319 M | [2] | SCREW-HEX SOCKET (M4X0.7X6-MM) | ||
| 112-5928 | [1] | PLATE | ||
| 13. | 153-8061 Y | [1] | MODULE GP-SPEEDOMETER & TACH | |
| 14. | 200-4412 C | [1] | CONTROL GP-MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| 15. | 155-8720 | [1] | FILM-MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| 16. | 197-0736 C | [1] | HARNESS AS-PANEL | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-7145 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [4] | KIT-CONNECTING PLUG (6-PIN) | ||
| 102-8800 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE) | ||||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-7996 | PLUG-CONNECTOR (6-PIN) | |||
| 8L-8413 | [43] | STRAP-CABLE (WHITE) | ||
| 6D-4161 | [14] | CONTACT | ||
| 3T-3159 | [14] | SPRING | ||
| 3T-3158 | [14] | SOCKET-LAMP | ||
| 17. | 162-7092 | [1] | FILM-PANEL (INDICATOR MODULE) | |
| 18. | 112-6171 | [1] | SWITCH AS-ROCKER (OPERATOR MONITOR MODE SELECTOR) | |
| 3E-8768 | [1] | SWITCH AS (24-VOLT) | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 112-6170 | [1] | ACTUATOR | ||
| 19. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 21. | 110-7887 C | [1] | SWITCH AS-START (KEY) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 22. | 9M-8406 | [2] | CLIP (LOOP) | |
| 23. | 9X-1046 M | [24] | SCREW (M4X0.7X18-MM) | |
| 24. | 9X-2042 M | [15] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 25. | 9X-2044 M | [7] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 26. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 27. | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| 28. | 129-7184 | [1] | FILM-INSTRUCTION (ENGINE START) | |
| 29. | 203-6481 C | [1] | PLATE AS | |
| 30. | 9X-2038 B | [2] | WASHER (7X19X2-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27020764
160-9169: PANEL GP-INSTRUMENT
160-9169 PANEL GP-INSTRUMENT -LOWER
S/N 3SW676-99999
PART OF 146-3286 CAB AR, 152-7720 CANOPY AR-OPEN ROPS
S/N 3SW676-99999
PART OF 146-3286 CAB AR, 152-7720 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 966G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-0109 | [2] | PLUG (ROCKER SWITCH) | |
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 4E-8722 | [7] | NUT (RETAINER) | |
| 4. | 7N-5876 | [11] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 5. | 9W-2111 | [1] | LAMP (24-VOLT) | |
| 6. | 166-6928 Y | [1] | MODULE GP-QUAD GAUGE | |
| 7. | 110-4215 | [1] | BEZEL (CENTER) | |
| 8. | 110-4216 | [1] | BEZEL (RH) | |
| 9. | 110-4217 | [1] | BEZEL (LH) | |
| 10. | 163-7310 | [1] | COVER (RH) | |
| 11. | 188-3119 | [1] | COVER (LH) | |
| 12. | 110-4218 | [1] | MODULE AS-LIGHT | |
| 7X-3319 M | [2] | SCREW-HEX SOCKET (M4X0.7X6-MM) | ||
| 112-5928 | [1] | PLATE | ||
| 13. | 190-3482 Y | [1] | MODULE GP-SPEEDOMETER & TACH | |
| 14. | 252-4503 C | [1] | CONTROL GP-UNPROGRAMMED (CATERPILLAR MONITORING SYSTEM) | |
| 15. | 155-8720 | [1] | FILM-MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| 16. | 197-0736 | [1] | HARNESS AS-PANEL | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 9X-7145 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [4] | KIT-CONNECTING PLUG (6-PIN) | ||
| 102-8800 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 8L-8413 | [43] | STRAP-CABLE (WHITE) | ||
| 17. | 162-7092 | [1] | FILM-PANEL (INDICATOR MODULE) | |
| 18. | 220-8358 | [1] | SWITCH AS-ROCKER (24-VOLT)(MODE SELECT) | |
| 19. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 21. | 110-7887 | [1] | SWITCH AS-START (KEY) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 22. | 9M-8406 | [2] | CLIP (LOOP) | |
| 23. | 9X-1046 M | [24] | SCREW (M4X0.7X18-MM) | |
| 24. | 9X-2042 M | [15] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 25. | 9X-2044 M | [7] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 26. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 27. | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| 28. | 129-7184 | [1] | FILM-INSTRUCTION (ENGINE START) | |
| 29. | 203-6481 | [1] | PLATE AS | |
| 30. | 9X-2038 | [2] | WASHER (7X19X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27020765
170-8026: PEDAL GP-BRAKE
170-8026 PEDAL GP-BRAKE -PEDAL, RH
S/N 3SW240-516
PART OF 163-3928 CONTROL GP-FOOT BRAKE
S/N 3SW240-516
PART OF 163-3928 CONTROL GP-FOOT BRAKE
For full view, you need register
Parts for your 966G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8958 | [1] | PIN | |
| 2. | 4E-9664 | [1] | PIN | |
| 3. | 009-3101 | [4] | RING-RETAINING | |
| 4. | 113-7752 | [1] | PEDAL-BRAKE | |
| 5. | 115-2247 | [1] | SPRING | |
| 6. | 163-3926 | [1] | ROLLER | |
| 7. | 170-8023 | [1] | BASE AS | |
| 7A. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 7B. | 8S-2225 | [1] | SEAL-LIP TYPE | |
| 7C. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 7D. | 163-3922 | [2] | BEARING | |
| 7E. | 163-3924 | [1] | BASE (RH) | |
| 7F. | 163-3925 | [1] | BEARING | |
| 7G. | 168-8505 M | [2] | STUD (M10X1.5X60-MM) | |
| M | METRIC PART | |||
#SEBP27020766
170-8027: PEDAL GP-BRAKE
170-8027 PEDAL GP-BRAKE -PEDAL, LH
S/N 3SW240-673
PART OF 163-3928, 180-3993 CONTROL GP-FOOT BRAKE
S/N 3SW240-673
PART OF 163-3928, 180-3993 CONTROL GP-FOOT BRAKE
For full view, you need register
Parts for your 966G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-9664 | [1] | PIN | |
| 2. | 6V-8672 M | [2] | SCREW-MACHINE (M2.5X0.45X16-MM) | |
| 3. | 8T-2899 M | [2] | SCREW-MACHINE (M2.5X0.45X6-MM) | |
| 4. | 009-3101 | [3] | RING-RETAINING | |
| 5. | 105-6117 | [1] | SWITCH AS-LIMIT (STOP LIGHT) | |
| 6. | 105-6118 | [1] | SWITCH AS-LIMIT (TMSN NEUTRALIZER) | |
| 7. | 113-7752 | [1] | PEDAL-BRAKE | |
| 8. | 114-9493 | [1] | HARNESS AS-WIRING (LEFT FOOT BRAKE BASE) | |
| 9. | 115-2247 | [1] | SPRING | |
| 10. | 125-3295 M | [2] | SCREW-PAN HEAD (M2.5X0.45X12-MM) | |
| 11. | 132-2169 | [1] | INSULATOR | |
| 12. | 153-6273 M | [1] | SETSCREW (M6X1X16-MM) | |
| 13. | 161-0022 | [1] | SWITCH AS-ADJUSTABLE (STOP LIGHT LIMIT) | |
| 14. | 163-3926 | [1] | ROLLER | |
| 15. | 170-8024 | [1] | BASE AS (LH) | |
| 16. | 7L-8316 | [1] | SETSCREW-SOCKET (10-32X2.54-IN) | |
| 16A. | 009-3101 | [1] | RING-RETAINING | |
| 16B. | 114-9490 | [1] | CAM-SWITCH | |
| 16C. | 115-0602 | [1] | SPRING | |
| 16D. | 115-0603 | [1] | KNOB | |
| 16E. | 115-1045 | [1] | SETSCREW-SOCKET | |
| 16F. | 116-9895 | [1] | PIN | |
| 16G. | 163-3927 | [1] | PIN | |
| M | METRIC PART | |||
#SEBP27020767
178-3186: PEDAL GP-BRAKE
178-3186 PEDAL GP-BRAKE -PEDAL, LH
S/N 3SW1225-99999
PART OF 178-3190 CONTROL GP-FOOT BRAKE
S/N 3SW1225-99999
PART OF 178-3190 CONTROL GP-FOOT BRAKE
For full view, you need register
Parts for your 966G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-7354 | [1] | SEAL-O-RING | |
| 2. | 4E-9664 | [1] | PIN | |
| 3. | 6V-2313 M | [2] | BOLT (M5X0.8X30-MM) | |
| 4. | 8S-2225 | [1] | SEAL-LIP TYPE | |
| 5. | 8T-2899 M | [2] | SCREW-MACHINE (M2.5X0.45X6-MM) | |
| 6. | 009-3101 | [3] | RING-RETAINING | |
| 7. | 105-6117 | [1] | SWITCH AS-LIMIT (STOP LIGHT) | |
| 8. | 113-7752 | [1] | PEDAL-BRAKE | |
| 9. | 115-2247 | [1] | SPRING | |
| 10. | 125-3295 M | [2] | SCREW-PAN HEAD (M2.5X0.45X12-MM) | |
| 11. | 146-1892 | [1] | HARNESS AS-BRAKE (STOP LIGHT) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 12. | 146-1893 | [1] | COVER | |
| 13. | 146-2598 | [1] | SEAL | |
| 14. | 153-6273 M | [1] | SETSCREW (M6X1X16-MM) | |
| 15. | 161-0022 | [1] | SWITCH AS-ADJUSTABLE (STOP LIGHT LIMIT) | |
| 16. | 187-2108 | [1] | TERMINAL | |
| 17. | 205-3582 | [1] | ROLLER | |
| 18. | 205-3583 | [1] | PIN | |
| 19. | 214-4863 Y | [1] | SENSOR GP-POSITION (ROTARY)(LEFT BRAKE PEDAL) | |
| 20. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 21. | 5M-6755 | [6] | SCREW-MACHINE (10-24X0.562-IN) | |
| 22. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27020768
180-3996: PEDAL GP-BRAKE
180-3996 PEDAL GP-BRAKE -PEDAL, RH
S/N 3SW517-673
PART OF 180-3993 CONTROL GP-FOOT BRAKE
FIELD REPLACEMENT ORDER @@@@@188-7497@@@@@
S/N 3SW517-673
PART OF 180-3993 CONTROL GP-FOOT BRAKE
FIELD REPLACEMENT ORDER @@@@@188-7497@@@@@
For full view, you need register
#SEBP27020769
186-0156: PEDAL GP-BRAKE
186-0156 PEDAL GP-BRAKE -PEDAL, LH
S/N 3SW674-UP
PART OF 186-0155 CONTROL GP-FOOT BRAKE
S/N 3SW674-UP
PART OF 186-0155 CONTROL GP-FOOT BRAKE
For full view, you need register
Parts for your 966G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-9664 | [1] | PIN | |
| 2. | 6V-8672 M | [2] | SCREW-MACHINE (M2.5X0.45X16-MM) | |
| 3. | 8S-2225 | [1] | SEAL-LIP TYPE | |
| 4. | 8T-2899 M | [2] | SCREW-MACHINE (M2.5X0.45X6-MM) | |
| 5. | 009-3101 | [3] | RING-RETAINING | |
| 6. | 105-6117 | [1] | SWITCH AS-LIMIT (STOP LIGHT) | |
| 7. | 105-6118 | [1] | SWITCH AS-LIMIT (TRANSMISSION NEUTRALIZER) | |
| 8. | 113-7752 | [1] | PEDAL-BRAKE | |
| 9. | 114-9493 | [1] | HARNESS AS-WIRING (LEFT FOOT BRAKE BASE) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 115-2247 | [1] | SPRING | |
| 11. | 125-3295 M | [2] | SCREW-PAN HEAD (M2.5X0.45X12-MM) | |
| 12. | 132-2169 | [1] | INSULATOR | |
| 13. | 153-6273 M | [1] | SETSCREW (M6X1X16-MM) | |
| 14. | 161-0022 | [1] | SWITCH AS-ADJUSTABLE (STOP LIGHT LIMIT) | |
| 15. | 163-3926 | [1] | ROLLER | |
| 16. | 163-4065 | [1] | SEAL-O-RING | |
| 17. | 187-2108 | [1] | TERMINAL | |
| 18. | 170-8583 | [1] | SHAFT AS | |
| 18A. | 7L-8316 | [1] | SETSCREW-SOCKET (10-32X2.54-IN) | |
| 18B. | 009-3101 | [1] | RING-RETAINING | |
| 18C. | 114-9490 | [1] | CAM-SWITCH | |
| 18D. | 115-0602 | [1] | SPRING | |
| 18E. | 115-0603 | [1] | KNOB | |
| 18F. | 115-1045 | [1] | SETSCREW-SOCKET | |
| 18G. | 116-9895 | [1] | PIN | |
| 19. | 8T-0325 M | [6] | BOLT (M5X0.8X14-MM) | |
| 20. | 114-0955 | [1] | SEAL | |
| 21. | 3J-7354 | [2] | SEAL-O-RING | |
| 22. | 9S-8002 | [2] | PLUG (7/16-20-THD) | |
| 23. | 114-1798 | [1] | COVER | |
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 966G :
Truck sale:
215,000
Caterpillar 966GC, Wheel Loaders, Construction
- Wheel Loaders
CATERPILLAR INTERNATIONAL SERVICES DEL PERU S.A.
- Wheel Loaders
CATERPILLAR INTERNATIONAL SERVICES DEL PERU S.A.
225,000
Caterpillar 966GC, Wheel Loaders, Construction
- Wheel Loaders
CATERPILLAR INTERNATIONAL SERVICES DEL PERU S.A.
- Wheel Loaders
CATERPILLAR INTERNATIONAL SERVICES DEL PERU S.A.
