150-0129 FILM GP S/N 3SW1-UP PART OF 133-0812 PLATE & FILM GP 966G WHEEL LOADER

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

0. 150-0129 FILM GP
1. 339-6231 FILM GP

GASKET & SEAL KITS

2. 134-3038 KIT-GASKET
3. 208-4836 KIT-GASKET
4. 281-0029 KIT-GASKET
5. 297-1740 KIT-GASKET
6. 297-1744 KIT-GASKET
7. 297-3126 KIT-GASKET
8. 392-3314 KIT-GASKET
9. 392-4638 KIT-GASKET
0. INFORMATION

WHEEL LOADER 966G WHEEL LOADER 3SW
966G Wheel Loader 3SW00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2702 966G 3SW (1997)

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

150-0129 FILM GP

339-6231 FILM GP

165-4104 MOUNTING GP-LUBRICATION CHART

133-0812 PLATE & FILM GP

2Q-8381 PLATE & FILM GP

#SEBP27020940

150-0129: FILM GP

FILM GP

150-0129 FILM GP
S/N 3SW1-UP
PART OF 133-0812 PLATE & FILM GP

i00680026 SEBP2702

For full view, you need register

Parts for your 966G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	151-6004	[1]	FILM-IDENTIFICATION (CAT, LH)
2.	151-6005	[1]	FILM-IDENTIFICATION (CAT, RH)
3.	152-7236	[1]	FILM-STRIPE (966G, LH)
4.	152-7237	[1]	FILM-STRIPE (966G, RH)
5.	100-5621	[2]	FILM-IDENTIFICATION (CATERPILLAR)(FRONT & REAR)

#SEBP27020941

339-6231: FILM GP

FILM GP

339-6231 FILM GP
S/N 6NC1-UP; R6J1-UP
PART OF 133-0826 ENGINE AR
FOR USE WITH 3300 CAPTIVE ENGINES BUILT AT CIPL-PSD

i03751586 SEBP2702

For full view, you need register

Parts for your 966G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7E-8050	[1]	FILM GP (EPA CERTIFICATION)
		INSTALL ON TOP OF VALVE COVER TOWARDS FRONT OF ENGINE READABLE FROM RIGHT HAND SIDE OF ENGINE IF POSSIBLE,
		OR LEFT HAND SIDE OF BLOCK JUST ABOVE ENGINE INFO LABEL.
		INSTALL LAMINANT ON TOP OF FILM.
115-5852	[1]	PLATE & FILM GP (ENGINE INFORMATION)
		INSTALL ON LEFT HAND REAR SIDE OF BLOCK.
		INSTALL LAMINANT OVER SILVER FILM.
3N-3790	[1]	PLATE-SERIAL NUMBER (ENGINE)
		INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON CAST PAD ON UPPER LEFT HAND SIDE OF CYLINDER BLOCK.
		STAMP SERIAL NUMBER IN CYLINDER BLOCK JUST BELOW SERIAL NUMBER PLATE IN CHARACTERS SIZE 6 MM HIGH.
274-7398	[1]	TAG-INFORMATION (CRANKCASE, NO OIL)
		INSTALL 'NO OIL' TAG AS REQUIRED ON ENGINES SHIPPED WITHOUT OIL IN THE CRANKCASE.
		ATTACH WITH WIRE TO OIL GAGE RING HANDLE, OR ONTO OIL FILLER CAP T-HANDLE, NECESSARY TO BE EASILY VISIBLE ON ENGINE.

#SEBP27020942

134-3038: KIT-GASKET

KIT-GASKET

134-3038 KIT-GASKET -FUEL SYSTEM
S/N 3SW1-UP

i04901899 SEBP2702

For full view, you need register

Parts for your 966G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
6I-1564	[1]	DIAPHRAGM
1P-0436	[2]	GASKET (FUEL PRIMING PUMP)
6I-2002	[1]	GASKET
6I-2003	[1]	GASKET
6I-2004	[1]	GASKET
7N-9520	[1]	GASKET
144-0477	[1]	GASKET
150-3724	[1]	GASKET
150-3726	[1]	GASKET
150-3728	[1]	GASKET
150-3730	[1]	GASKET
150-3727	[1]	GASKET-FUEL
8N-5763	[1]	SEAL
9L-9098	[6]	SEAL-CARBON STOP
4N-0260	[1]	SEAL-LIP TYPE
138-9507	[1]	SEAL-LIP TYPE
1J-9671	[1]	SEAL-O-RING
2D-6392	[1]	SEAL-O-RING
175-7900	[1]	SEAL-O-RING
2J-0157	[1]	SEAL-O-RING
2M-9780	[1]	SEAL-O-RING
3D-2824	[1]	SEAL-O-RING
3D-2898	[1]	SEAL-O-RING
4J-5477	[1]	SEAL-O-RING
3J-1907	[8]	SEAL-O-RING
3J-7354	[5]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
4J-7533	[2]	SEAL-O-RING
4J-8997	[1]	SEAL-O-RING
4M-8303	[1]	SEAL-O-RING
5F-9144	[1]	SEAL-O-RING
5P-6620	[1]	SEAL-O-RING
5P-6718	[1]	SEAL-O-RING
5P-8210	[1]	SEAL-O-RING
5P-8215	[1]	SEAL-O-RING
5P-9757	[1]	SEAL-O-RING
6F-6672	[1]	SEAL-O-RING
6H-9691	[1]	SEAL-O-RING
6J-2419	[1]	SEAL-O-RING
7F-8607	[1]	SEAL-O-RING
196-1804	[1]	SEAL-O-RING
8M-8515	[1]	SEAL-O-RING
317-0808	[1]	SEAL-O-RING
221-9941	[1]	SEAL-O-RING
061-9458	[1]	SEAL-O-RING
114-8718	[6]	SEAL-O-RING
6V-6921	[1]	SEAL-RING
8H-2778	[1]	SEAL-RING
271-2489	[6]	SEAL-WASHER
7W-4482	[6]	WASHER (17.14X9.76X3.18-MM THK)
115-3358	[1]	WASHER (12.7X6.65X0.79-MM THK)
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

#SEBP27020943

208-4836: KIT-GASKET

KIT-GASKET

208-4836 KIT-GASKET -WATER PUMP
S/N 3SW1-UP
THIS KIT IS FOR ALL 3300 ENGINES AND COME WITH ALL 3300 REMAN WATER PUMPS. THIS KIT CONTAINS THE GASKETS AND SEALS TO INSTALL THE BYPASS ELBOW AND MAIN WATER PUMP
FIELD REPLACEMENT FOR 170-1834 KIT-GASKET, 171-3686 KIT-GASKET, 204-4464 KIT-GASKET

i05291696 SEBP2702

For full view, you need register

Parts for your 966G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
2P-0406	[1]	GASKET
7N-0200	[1]	GASKET
2P-6132	[1]	GASKET-ELBOW
2P-0220	[1]	GASKET-PUMP
175-7904	[1]	SEAL-O-RING
9M-4849	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED

#SEBP27020944

281-0029: KIT-GASKET

KIT-GASKET

281-0029 KIT-GASKET -SINGLE FUEL INJECTOR SEALS
S/N 3SW1-UP

i04540300 SEBP2702

For full view, you need register

Parts for your 966G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
9L-9098	[1]	SEAL-CARBON STOP
271-2489	[1]	SEAL-WASHER
7W-4487	[1]	WASHER-SPECIAL (9.76X17.14X1.27-MM THK)

#SEBP27020945

297-1740: KIT-GASKET

KIT-GASKET

297-1740 KIT-GASKET -OIL COOLER, LINES
S/N 3SW1-UP

i05931798 SEBP2702

For full view, you need register

Parts for your 966G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
2A-3541	[2]	GASKET
2S-0795	[2]	GASKET
2W-4561	[1]	GASKET
4N-3841	[1]	GASKET
8S-5409	[2]	GASKET
9Y-6860	[1]	GASKET
3J-7354	[1]	SEAL-O-RING
3P-1155	[2]	SEAL-O-RING
5P-8118	[2]	SEAL-O-RING

#SEBP27020946

297-1744: KIT-GASKET

KIT-GASKET

297-1744 KIT-GASKET -WATER PUMP
S/N 3SW1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.

i05953069 SEBP2702

For full view, you need register

Parts for your 966G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7N-0200	[1]	GASKET
172-0038	[1]	GASKET
2P-6132	[1]	GASKET-ELBOW
175-7904	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP27020947

297-3126: KIT-GASKET

KIT-GASKET

297-3126 KIT-GASKET -TURBOCHARGER
S/N 3SW1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@133-0826@@@@@, 08Z 1-UP

i04901645 SEBP2702

For full view, you need register

Parts for your 966G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7L-3195	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)
1S-4295	[1]	GASKET (TURBOCHARGER)
4M-6480	[1]	GASKET
2F-7761	[1]	GASKET
188-6126	[1]	GASKET
1N-9372	[1]	GASKET-FLANGE (AIR INLET)
1S-4810	[1]	GASKET-OIL DRAIN
1S-6595	[1]	GASKET-OIL SUPPLY
391-2167	[4]	LOCKNUT-FLANGE (3/8X16-THD)
3J-7354	[1]	SEAL-O-RING
2M-9780	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5H-7704	[2]	SEAL-O-RING
9M-4849	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP27020948

392-3314: KIT-GASKET

KIT-GASKET

392-3314 KIT-GASKET -CENTRAL, LOWER STRUCTURE
S/N 3SW1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.

i05972792 SEBP2702

For full view, you need register

Parts for your 966G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST
2P-8746	[1]	GASKET
4M-6480	[1]	GASKET
5S-8055	[1]	GASKET
169-4200	[1]	GASKET
169-4199	[1]	GASKET-OIL PAN
2M-9780	[2]	SEAL-O-RING
3J-1907	[1]	SEAL-O-RING
3J-7354	[2]	SEAL-O-RING
3K-0360	[2]	SEAL-O-RING
8L-2786	[2]	SEAL-O-RING
8M-5248	[2]	SEAL-O-RING
8M-5253	[1]	SEAL-O-RING
9M-4849	[1]	SEAL-O-RING
114-2687	[1]	SEAL-O-RING
121-0145	[2]	SEAL-O-RING
5P-6718	[1]	SEAL-O-RING
4N-0699	[1]	GASKET
2W-4561	[1]	GASKET
2H-3932	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP27020949

392-4638: KIT-GASKET

KIT-GASKET

392-4638 KIT-GASKET
S/N 3SW1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE

i06283460 SEBP2702

For full view, you need register

Parts for your 966G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
9L-2295	[4]	BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)
1P-0451	[1]	GASKET
5S-6735	[2]	GASKET
7N-0200	[1]	GASKET
7N-0944	[1]	GASKET
8H-9788	[1]	GASKET
188-6126	[1]	GASKET
111-8015	[1]	GASKET AS-CYLINDER HEAD
2P-6132	[1]	GASKET-ELBOW
1N-9372	[1]	GASKET-FLANGE (AIR INLET)
9Y-1979	[3]	GASKET-MANIFOLD
115-7550	[1]	GASKET-PLATE
391-2167	[4]	LOCKNUT-FLANGE (3/8X16-THD)
7N-8018	[6]	SEAL
9Y-1798	[18]	SEAL
9M-4849	[1]	SEAL-O-RING
3S-5496	[2]	SEAL-O-RING
5H-7704	[2]	SEAL-O-RING
5M-5860	[2]	SEAL-O-RING
6L-1648	[2]	SEAL-O-RING
7L-9061	[1]	SEAL-O-RING
8H-2046	[1]	SEAL-O-RING
8M-4448	[1]	SEAL-O-RING
133-1247	[1]	SEAL-VALVE COVER
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED