ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
AXLE GPBRAKING SYSTEM
BRAKE GPPOWER TRAIN
CONTROL GP-TRANSMISSION HYDELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP27040310
163-6279: WIRING GP-SECONDARY STEERING
163-6279 WIRING GP-SECONDARY STEERING
S/N 5FW1340-99999
PART OF 141-2800 STEERING AR-SECONDARY
S/N 5FW1340-99999
PART OF 141-2800 STEERING AR-SECONDARY
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6450 | [1] | SWITCH AS-PRESSURE (PRIMARY STEERING OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 3S-2093 | [5] | STRAP-CABLE | |
| 3. | 140-3641 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 E | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW)(22CM) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(32CM) | |||
| 4. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 164-6582 | [1] | HARNESS AS | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE) | ||||
| 7. | 155-0621 C | [1] | CABLE AS | |
| 1M-4986 | [1] | TERMINAL-RING (0-GA, 1/2-IN SCREW) | ||
| 5P-0760 E | CABLE (0-GA, RED)(108CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 030-1707 | [1] | TERMINAL-RING (0-GA, 3/8-IN SCREW) | ||
| 8. | 130-5301 | [2] | CLIP | |
| 9. | 3K-0360 | [2] | SEAL-O-RING | |
| 10. | 4D-9517 | [2] | CLIP | |
| 11. | 8M-2770 | [2] | CLIP (LOOP) | |
| 12. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 16. | 3E-6450 | [1] | SWITCH AS-PRESSURE (SECONDARY STEERING OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP27040311
149-0249: WIRING GP-SENSOR
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2H-3429 | [1] | RING-RETAINING | |
| 2. | 2L-6726 | [1] | RING-RETAINING | |
| 3. | 4E-2250 | [1] | HOUSING | |
| 4. | 4E-2453 | [1] | SHAFT | |
| 5. | 4E-7088 | [1] | LEVER | |
| 6. | 6D-3025 | [2] | BALL BEARING | |
| 7. | 6V-0852 | [1] | CAP-DUST | |
| 8. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 9. | 7I-3236 | [1] | SUPPORT AS | |
| 10. | 7X-7662 | [1] | ROD END | |
| 11. | 8C-5607 | [6] | MOUNT-ISOLATION | |
| 12. | 8C-5608 | [3] | SPACER (6.5X9.5X25.4-MM THK) | |
| 13. | 9R-4921 I | [1] | HOSE AS | |
| 14. | 121-0284 Y | [1] | SENSOR GP-POSITION (LIFT) | |
| 15. | 122-2222 | [1] | ADAPTER | |
| 16. | 124-4592 | [1] | ROD END | |
| 17. | 124-4672 Y | [1] | SENSOR GP-PRESSURE (PAYLOAD, LIFT CYL HEAD END OIL) | |
| 19. | 127-5778 | [1] | TEE-O-RING PORT | |
| 20. | 130-5300 | [1] | CLIP | |
| 21. | 132-1451 | [1] | BRACKET AS | |
| 110-2023 M | [1] | STUD-WELD (M10X1.5X25-MM) | ||
| 22. | 163-0094 | [1] | ARM-BAIL | |
| 23. | 147-2764 | [1] | HARNESS AS-SENSOR (LIFT CYLINDER HEAD END OIL) | |
| 24. | 125-0380 M | [1] | NUT-HEX (M8X1.25-THD, LH) | |
| 25. | 3J-1907 | [3] | SEAL-O-RING | |
| 26. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 27. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 28. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 29. | 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | |
| 30. | 5P-9085 | [2] | CLIP (LOOP) | |
| 31. | 6V-2313 M | [2] | BOLT (M5X0.8X30-MM) | |
| 32. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 33. | 6V-8397 | [4] | SEAL-O-RING | |
| 34. | 6V-8636 | [1] | CONNECTOR | |
| 35. | 6V-9189 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 36. | 6V-9850 | [1] | ELBOW | |
| 37. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 39. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 40. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 41. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 42. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 43. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 44. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 45. | 9X-2480 M | [3] | BOLT (M6X1X45-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27040312
149-0249: WIRING GP-SENSOR
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2H-3429 | [1] | RING-RETAINING | |
| 2. | 2L-6726 | [1] | RING-RETAINING | |
| 3. | 4E-2250 | [1] | HOUSING | |
| 4. | 4E-2453 | [1] | SHAFT | |
| 5. | 4E-7088 | [1] | LEVER | |
| 6. | 6D-3025 | [2] | BALL BEARING | |
| 7. | 6V-0852 | [1] | CAP-DUST | |
| 8. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 9. | 7I-3236 | [1] | SUPPORT AS | |
| 10. | 7X-7662 | [1] | ROD END | |
| 11. | 8C-5607 | [6] | MOUNT-ISOLATION | |
| 12. | 8C-5608 | [3] | SPACER (6.5X9.5X25.4-MM THK) | |
| 13. | 9R-4921 I | [1] | HOSE AS | |
| 14. | 161-8904 CY | [1] | SENSOR GP-POSITION (ROTARY)(LIFT) | |
| 15. | 122-2222 | [1] | ADAPTER | |
| 16. | 124-4592 | [1] | ROD END | |
| 17. | 124-4672 Y | [1] | SENSOR GP-PRESSURE (PAYLOAD, LIFT CYL HEAD END OIL) | |
| 18. | 125-0901 | [1] | ROD | |
| 19. | 127-5778 | [1] | TEE-O-RING PORT | |
| 20. | 130-5300 | [1] | CLIP | |
| 21. | 132-1451 | [1] | BRACKET AS | |
| 110-2023 M | [1] | STUD-WELD (M10X1.5X25-MM) | ||
| 22. | 163-0094 | [1] | ARM-BAIL | |
| 23. | 147-2764 | [1] | HARNESS AS-SENSOR (LIFT CYLINDER HEAD END OIL) | |
| 24. | 125-0380 M | [1] | NUT-HEX (M8X1.25-THD, LH) | |
| 25. | 3J-1907 | [3] | SEAL-O-RING | |
| 26. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 27. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 28. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 29. | 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | |
| 30. | 5P-9085 | [2] | CLIP (LOOP) | |
| 31. | 6V-2313 M | [2] | BOLT (M5X0.8X30-MM) | |
| 32. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 33. | 6V-8397 | [4] | SEAL-O-RING | |
| 34. | 6V-8636 | [1] | CONNECTOR | |
| 35. | 6V-9189 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 36. | 6V-9850 | [1] | ELBOW | |
| 37. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 39. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 40. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 41. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 42. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 43. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 44. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 45. | 9X-2480 M | [3] | BOLT (M6X1X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27040313
112-0768: AXLE AR-FIXED
112-0768 AXLE AR-FIXED -FRONT, STANDARD DIFFERENTIAL
S/N 5FW1-UP
PART OF 112-6984 POWER TRAIN AR
S/N 5FW1-UP
PART OF 112-6984 POWER TRAIN AR
For full view, you need register
#SEBP27040314
126-7843: AXLE AR-FIXED
126-7843 AXLE AR-FIXED -FRONT, LIMITED SLIP DIFFERENTIAL
S/N 5FW1-99999
S/N 5FW1-99999
For full view, you need register
#SEBP27040315
112-0723: AXLE AR-OSCILLATING
112-0723 AXLE AR-OSCILLATING -REAR, STANDARD DIFFERENTIAL
S/N 5FW1-99999
PART OF 112-6984 POWER TRAIN AR
S/N 5FW1-99999
PART OF 112-6984 POWER TRAIN AR
For full view, you need register
#SEBP27040316
126-7845: AXLE AR-OSCILLATING
126-7845 AXLE AR-OSCILLATING -REAR, LIMITED SLIP DIFFERENTIAL
S/N 5FW1-UP
PART OF 164-6498 CONVERSION AR-RIDE CONTROL
S/N 5FW1-UP
PART OF 164-6498 CONVERSION AR-RIDE CONTROL
For full view, you need register
#SEBP27040317
126-7846: AXLE AR-OSCILLATING
126-7846 AXLE AR-OSCILLATING -REAR, NOSPIN DIFFERENTIAL
S/N 5FW1-99999
S/N 5FW1-99999
For full view, you need register
#SEBP27040318
112-0757: BRAKE & PLANETARY GP
112-0757 BRAKE & PLANETARY GP
S/N 5FW1-99999
PART OF 112-0768, 126-7843 AXLE AR-FIXED, 112-0723, 126-7845, 126-7846 AXLE AR-OSCILLATING
S/N 5FW1-99999
PART OF 112-0768, 126-7843 AXLE AR-FIXED, 112-0723, 126-7845, 126-7846 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8R-4568 | [1] | PISTON | |
| 2. | 8R-9207 | [1] | SEAL | |
| 3. | 293-3609 | [3] | SPRING | |
| 4. | 334-1034 | [1] | DISC-FRICTION | |
| 5. | 9C-8418 | [1] | PLATE-REACTION | |
| 6. | 1F-5151 | [3] | DOWEL | |
| 7. | 164-3071 | [3] | GEAR-PLANETARY (30-TEETH) | |
| 8. | 9C-7727 | [3] | BUSHING | |
| 9. | 9C-9537 | [6] | WASHER-THRUST | |
| 10. | 8T-2925 | [3] | PIN-SPRING | |
| 11. | 8R-1888 | [3] | SHAFT-PLANETARY | |
| 12. | 8R-4571 | [1] | CARRIER-PLANETARY | |
| 13. | 9M-4335 | [2] | DOWEL-REACTION | |
| 14. | 164-6476 | [1] | GEAR-SUN (18-TEETH) | |
| 15. | 149-9112 | [1] | DOWEL-HOLLOW | |
| 16. | 117-1801 | [1] | DOWEL | |
| 17. | 372-0730 | [1] | GEAR-RING (81-TEETH) | |
| 18. | 2N-2658 | [1] | BOLT-SOCKET HEAD (8-32X15.88-MM) | |
| 19. | 096-6166 | [1] | WASHER-HARD (4.5X9X1-MM THK) | |
| 20. | 112-0759 | [1] | PLUG | |
| 21. | 138-1645 | [3] | PIN-SPRING | |
| 22. | 149-9114 | [1] | PIN (BRAKE DISC WEAR INDICATOR) | |
| 23. | 150-4651 | [1] | SEAL-O-RING | |
| 24. | 325-3780 | [1] | SEAL | |
| 25. | 117-1803 | [1] | CUP | |
| 26. | 325-3781 | [1] | RING-BACKUP |
#SEBP27040319
117-5756: CONTROL GP-TRANSMISSION HYD
117-5756 CONTROL GP-TRANSMISSION HYD
S/N 2SY1-562
PART OF 114-8945 TRANSMISSION AR
S/N 2SY1-562
PART OF 114-8945 TRANSMISSION AR
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-4551 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYD CONTROL) | |
| 2. | 4F-4097 | [1] | SEAL-O-RING | |
| 3. | 121-4298 Y | [6] | VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH) | |
| 4. | 8S-0768 | [6] | SEAL-O-RING | |
| 5. | 8T-0100 M | [16] | BOLT (M8X1.25X60-MM) | |
| 6. | 9M-1974 | [15] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 6Y-2103 | [1] | VALVE GP-RELIEF (TORQUE CONVERTER INLET) | |
| 8. | 148-8805 | [1] | HARNESS AS-TRANSMISSION (HYDRAULIC CONTROL) | |
| 9. | 9X-4609 | [1] | SEAL-O-RING | |
| 10. | 3S-2093 | [4] | STRAP-CABLE | |
| 11. | 4P-7581 | [1] | CLIP (LADDER) | |
| 12. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 5P-9085 | [2] | CLIP (LOOP) | |
| 14. | 9X-3495 | [1] | CLIP AS | |
| 15. | 100-3055 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
| 16. | 3J-1907 | [1] | SEAL-O-RING | |
| 17. | 124-9403 | [1] | CLIP AS-CONNECTING | |
| 18. | 6V-5215 M | [1] | BOLT (M8X1.25X16-MM) | |
| 19. | 6D-4246 | [1] | CLIP (LOOP) | |
| 20. | 123-3182 | [2] | CLIP AS | |
| 21. | 6V-0852 | [6] | CAP-DUST | |
| 22. | 124-9402 | [5] | CLIP AS | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
