ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
AXLE GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP27050300
162-7354: WIRING GP-MACHINE
162-7354 WIRING GP-MACHINE
S/N 7BW1-587
PART OF 157-2110, 157-2113 CONVERSION AR-MACHINE
S/N 7BW1-587
PART OF 157-2110, 157-2113 CONVERSION AR-MACHINE
For full view, you need register
Parts for your 962G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-4312 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 2. | 3E-7693 | [1] | SWITCH AS-PRESSURE (SERVICE BRAKE OIL) | |
| (EACH SWITCH INCLUDES) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 3S-2093 | [30] | STRAP-CABLE | |
| 4. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL) | |
| 4B-2049 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 5. | 123-2993 | [1] | SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 130-5300 | [7] | CLIP | |
| 7. | 136-3937 | [1] | SHEET | |
| 8. | 136-4129 | [1] | BRACKET | |
| 9. | 163-1035 Y | [1] | WIRING GP-RELAY PANEL | |
| 10. | 145-9302 | [1] | HARNESS AS-CHASSIS | |
| 11. | 146-0240 | [1] | SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR) | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 12. | 146-5037 | [1] | PLATE-INSTRUCTION | |
| 13. | 146-9542 | [1] | HARNESS AS-HYDRAULIC TANK (OIL LEVEL SW. OIL TEMP SENSOR) | |
| 14. | 1S-0994 | [6] | CLIP (LOOP) | |
| 15. | 2M-3433 | [2] | GROMMET | |
| 16. | 2M-9780 | [1] | SEAL-O-RING | |
| 17. | 3J-1907 | [3] | SEAL-O-RING | |
| 18. | 4D-7388 | [1] | CLIP (LOOP) | |
| 19. | 4S-1962 | [6] | CLIP (LOOP) | |
| 20. | 4S-4455 | [1] | CLIP | |
| 21. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 22. | 5P-7854 | [1] | CLIP | |
| 23. | 5P-9297 | [7] | CLIP (LOOP) | |
| 24. | 5P-9299 | [2] | CLIP (LOOP) | |
| 25. | 6D-4246 | [1] | CLIP (LOOP) | |
| 26. | 6V-1889 | [2] | CLIP (LOOP) | |
| 27. | 7D-7233 | [1] | CLIP (LOOP) | |
| 28. | 8C-9660 | [8] | WASHER (4.6X7.9X0.8-MM THK) | |
| 29. | 8T-4121 | [36] | WASHER-HARD (11X21X2.5-MM THK) | |
| 30. | 8T-4133 M | [9] | NUT (M10X1.5-THD) | |
| 31. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 32. | 8T-4137 M | [24] | BOLT (M10X1.5X20-MM) | |
| 33. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 34. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 35. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 36. | 8T-9405 M | [4] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 37. | 9M-8406 | [2] | CLIP (LOOP) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27050301
162-7354: WIRING GP-MACHINE
162-7354 WIRING GP-MACHINE
S/N 7BW1-588
PART OF 157-2110, 157-2113 CONVERSION AR-MACHINE
S/N 7BW1-588
PART OF 157-2110, 157-2113 CONVERSION AR-MACHINE
For full view, you need register
Parts for your 962G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-4312 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 2. | 175-3244 C | [1] | SWITCH AS-PRESSURE (SERVICE BRAKE OIL) | |
| (EACH SWITCH INCLUDES) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 3S-2093 | [30] | STRAP-CABLE | |
| 4. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL) | |
| 4B-2049 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 5. | 123-2993 | [1] | SWITCH GP-LIQUID LEVEL (HYDRAULIC TANK) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 130-5300 | [8] | CLIP | |
| 7. | 136-3937 | [1] | SHEET | |
| 8. | 136-4129 | [1] | BRACKET | |
| 9. | 163-1035 Y | [1] | WIRING GP-RELAY PANEL | |
| 10. | 145-9302 | [1] | HARNESS AS-CHASSIS | |
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-7147 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 8N-1533 | [1] | PLUG AS-CONNECTOR (7-PIN) | ||
| 129-7163 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 129-7164 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 3T-3043 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 9X-1343 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 155-2260 | [5] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 11. | 146-0240 | [1] | SWITCH GP-TOGGLE (LOCKING)(TILT HOOD ACTUATOR) | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS WEDGE) | ||||
| 12. | 188-6252 | [1] | FILM-INSTRUCTION (HOOD TILT) | |
| 13. | 146-9542 | [1] | HARNESS AS-HYDRAULIC TANK (OIL LEVEL SW. OIL TEMP SENSOR) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 8T-8737 | PLUG-SEAL | |||
| 14. | 1S-0994 | [6] | CLIP (LOOP) | |
| 15. | 2M-3433 | [2] | GROMMET | |
| 16. | 2M-9780 | [1] | SEAL-O-RING | |
| 17. | 3J-1907 | [3] | SEAL-O-RING | |
| 18. | 4D-7388 | [1] | CLIP (LOOP) | |
| 19. | 4S-1962 | [6] | CLIP (LOOP) | |
| 20. | 4S-4455 | [1] | CLIP | |
| 21. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 22. | 5P-7854 | [1] | CLIP | |
| 23. | 5P-9297 | [7] | CLIP (LOOP) | |
| 24. | 5P-9299 | [2] | CLIP (LOOP) | |
| 25. | 6D-4246 | [1] | CLIP (LOOP) | |
| 26. | 6V-1889 | [2] | CLIP (LOOP) | |
| 27. | 7D-7233 | [1] | CLIP (LOOP) | |
| 28. | 8C-9660 | [8] | WASHER (4.6X7.9X0.8-MM THK) | |
| 29. | 8T-4121 | [37] | WASHER-HARD (11X21X2.5-MM THK) | |
| 30. | 8T-4133 M | [9] | NUT (M10X1.5-THD) | |
| 31. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 32. | 8T-4137 M | [24] | BOLT (M10X1.5X20-MM) | |
| 33. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 34. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 35. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 36. | 8T-9405 M | [4] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 37. | 9M-8406 | [2] | CLIP (LOOP) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27050302
144-2276: WIRING GP-RELAY PANEL
144-2276 WIRING GP-RELAY PANEL
S/N 7BW1-99999
PART OF 145-9301 WIRING GP-MACHINE
S/N 7BW1-99999
PART OF 145-9301 WIRING GP-MACHINE
For full view, you need register
Parts for your 962G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-0075 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY) | |
| 2. | 9S-4693 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(MAIN) | |
| 1H-3244 | [2] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 3. | 3K-8782 | [4] | FUSE (10-AMPERE) | |
| 4. | 3S-2093 | [7] | STRAP-CABLE | |
| 5. | 4B-2049 | [2] | NUT (10-32-THD) | |
| 6. | 4K-5122 | [4] | HOLDER AS-FUSE | |
| (EACH INCLUDES) | ||||
| 139-0178 | [1] | CAP | ||
| 7. | 7V-9275 | [1] | STRAP | |
| 8. | 8T-6411 M | [7] | SCREW-MACHINE (M6X1X12-MM) | |
| 9. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 10. | 167-0138 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 11. | 121-1023 | [1] | BLOCK-TERMINAL | |
| 12. | 125-1302 | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 13. | 130-5300 | [1] | CLIP | |
| 14. | 130-7068 | [1] | PLATE-INSTRUCTION | |
| 15. | 130-7070 | [1] | PLATE-INSTRUCTION | |
| 16. | 144-2256 | [1] | BOX AS | |
| 6V-9632 M | [9] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [3] | LINK | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-4935 M | [1] | BOSS-WELD (M10X1.5X45-MM) | ||
| 9R-2821 M | [4] | BOSS (M10X1.5X15-MM) | ||
| 17. | 144-2257 | [1] | PLATE | |
| 18. | 147-2079 | [1] | HARNESS AS-BOX (RELAY) | |
| 19. | 147-2080 | [1] | HARNESS AS-BOX (FUSES, LIGHTS, HOOD, BREAKERS) | |
| 20. | 147-2083 | [1] | CABLE AS (ALTERNATOR) | |
| 21. | 166-3423 | [1] | CABLE AS (AIR INLET HEATER RELAY) | |
| 22. | 147-2085 | [1] | CABLE AS (ALTERNATOR) | |
| 23. | 147-2086 | [1] | CABLE AS (MAIN POWER RELAY) | |
| 24. | 147-2087 | [1] | WIRE AS (START RELAY) | |
| 25. | 166-2834 | [1] | CABLE AS (AIR INLET HEATER RELAY) | |
| 26. | 147-2089 | [1] | CABLE AS (MAIN POWER RELAY) | |
| 27. | 147-2090 | [1] | WIRE AS | |
| 28. | 149-2612 | [1] | RELAY AS (24-VOLT)(HOOD) | |
| 29. | 4B-4274 | [6] | WASHER (5.5X13X1.2-MM THK) | |
| 30. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 31. | 5C-9553 M | [11] | BOLT (M6X1X16-MM) | |
| 32. | 5L-4507 | [6] | SCREW-MACHINE (10-32X0.875-IN) | |
| 33. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 35. | 8T-4205 | [13] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 36. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| 37. | 9S-4693 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR) | |
| 1H-3244 | [2] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 38. | 9H-1958 | [1] | CIRCUIT BREAKER GP (20-AMPERE)(TILT HOOD) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 39. | 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | |
| 40. | 9X-8486 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| 41. | 184-7435 | [1] | PLATE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27050303
163-1035: WIRING GP-RELAY PANEL
163-1035 WIRING GP-RELAY PANEL
S/N 7BW1-99999
PART OF 162-7354 WIRING GP-MACHINE
S/N 7BW1-99999
PART OF 162-7354 WIRING GP-MACHINE
For full view, you need register
Parts for your 962G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-0075 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY) | |
| 2. | 3E-7294 | [1] | CIRCUIT BREAKER AS (105-AMPERE)(MAIN) | |
| 3. | 3K-8782 | [4] | FUSE (10-AMPERE) | |
| 4. | 3S-2093 | [7] | STRAP-CABLE | |
| 5. | 4B-2049 | [4] | NUT (10-32-THD) | |
| 6. | 4K-5122 | [4] | HOLDER AS-FUSE | |
| (EACH INCLUDES) | ||||
| 139-0178 | [1] | CAP | ||
| 7. | 7V-9275 | [1] | STRAP | |
| 8. | 8T-6411 M | [7] | SCREW-MACHINE (M6X1X12-MM) | |
| 9. | 9H-1958 | [1] | CIRCUIT BREAKER GP (20-AMPERE)(RUNNING LIGHT) | |
| 10. | 101-7740 | [1] | SWITCH AS-MAGNETIC (MAIN RELAY) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 3E-3362 | [1] | WEDGE-PLUG LOCK (2-PIN) | ||
| 4F-2294 | [2] | NUT-JAM (5/16-24-THD) | ||
| 6V-8186 | [2] | NUT-FULL (5/16-24-THD) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 11. | 121-1023 | [1] | BLOCK-TERMINAL | |
| 12. | 125-1302 | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 13. | 130-5300 | [1] | CLIP | |
| 14. | 130-7068 | [1] | PLATE-INSTRUCTION | |
| 15. | 130-7070 | [1] | PLATE-INSTRUCTION | |
| 16. | 144-2256 | [1] | BOX AS | |
| 6V-9632 M | [9] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [3] | LINK | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-4935 M | [1] | BOSS-WELD (M10X1.5X45-MM) | ||
| 9R-2821 M | [4] | BOSS (M10X1.5X15-MM) | ||
| 17. | 144-2257 | [1] | PLATE | |
| 18. | 147-2079 | [1] | HARNESS AS-BOX (RELAY) | |
| 19. | 147-2080 | [1] | HARNESS AS-BOX (FUSES, LIGHTS, HOOD, BREAKERS) | |
| 20. | 147-2083 | [1] | CABLE AS (ALTERNATOR) | |
| 21. | 166-3423 | [1] | CABLE AS (AIR INLET HEATER RELAY) | |
| 22. | 147-2085 | [1] | CABLE AS (ALTERNATOR) | |
| 23. | 147-2086 | [1] | CABLE AS (MAIN POWER RELAY) | |
| 24. | 147-2087 | [1] | WIRE AS (START RELAY) | |
| 25. | 166-2834 | [1] | CABLE AS (AIR INLET HEATER RELAY) | |
| 26. | 147-2089 | [1] | CABLE AS (MAIN POWER RELAY) | |
| 27. | 147-2090 | [1] | WIRE AS | |
| 28. | 149-2612 | [1] | RELAY AS (24-VOLT)(TILT HOOD) | |
| 29. | 4B-4274 | [8] | WASHER (5.5X13X1.2-MM THK) | |
| 30. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 31. | 5C-9553 M | [11] | BOLT (M6X1X16-MM) | |
| 32. | 5L-4507 | [8] | SCREW-MACHINE (10-32X0.875-IN) | |
| 33. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 35. | 8T-4205 | [13] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 36. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| 37. | 3E-7294 | [1] | CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR) | |
| 38. | 9H-1958 | [1] | CIRCUIT BREAKER GP (20-AMPERE)(TILT HOOD) | |
| 39. | 184-7435 | [1] | PLATE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27050304
141-2803: WIRING GP-SECONDARY STEERING
141-2803 WIRING GP-SECONDARY STEERING
S/N 7BW1-556
PART OF 141-2800 STEERING AR-SECONDARY
S/N 7BW1-556
PART OF 141-2800 STEERING AR-SECONDARY
For full view, you need register
Parts for your 962G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8R-1460 | [1] | CABLE AS | |
| 2. | 115-3069 | [2] | CLIP AS-CONNECTING (3-PIN) | |
| 3. | 118-5597 | [1] | DIODE AS | |
| 4. | 139-2599 | [1] | RELAY | |
| 5. | 141-2811 | [1] | HARNESS AS | |
| 6. | 141-2812 | [1] | CABLE AS | |
| 7. | 145-1890 | [1] | WIRE AS | |
| 8. | 148-6677 | [1] | CABLE AS | |
| 9. | 3E-6450 | [2] | SWITCH AS-PRESSURE | |
| (EACH INCLUDES) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 10. | 3K-0360 | [2] | SEAL-O-RING | |
| 11. | 4B-4863 | [4] | WASHER (4.7X11X1.2-MM THK) | |
| 12. | 4D-9517 | [1] | CLIP | |
| 13. | 5C-8312 M | [2] | NUT (M4X0.7-THD) | |
| 14. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 15. | 8M-2770 | [2] | CLIP (LOOP) | |
| 16. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 18. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 19. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 21. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 22. | 8T-9405 M | [2] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| M | METRIC PART | |||
#SEBP27050305
163-6279: WIRING GP-SECONDARY STEERING
163-6279 WIRING GP-SECONDARY STEERING
S/N 7BW557-UP
PART OF 141-2800 STEERING AR-SECONDARY
S/N 7BW557-UP
PART OF 141-2800 STEERING AR-SECONDARY
For full view, you need register
Parts for your 962G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6450 | [1] | SWITCH AS-PRESSURE (PRIMARY STEERING OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 3S-2093 | [5] | STRAP-CABLE | |
| 3. | 140-3641 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 E | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW)(22CM) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(32CM) | |||
| 4. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 164-6582 | [1] | HARNESS AS | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE) | ||||
| 7. | 166-3970 | [1] | CABLE AS | |
| 1M-4986 | [1] | TERMINAL-RING (0-GA, 1/2-IN SCREW) | ||
| 5P-0760 E | CABLE (0-GA, RED)(108CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 030-1707 | [1] | TERMINAL-RING (0-GA, 3/8-IN SCREW) | ||
| 8. | 130-5301 | [2] | CLIP | |
| 9. | 3K-0360 | [2] | SEAL-O-RING | |
| 10. | 4D-9517 | [2] | CLIP | |
| 11. | 8M-2770 | [2] | CLIP (LOOP) | |
| 12. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 16. | 3E-6450 | [1] | SWITCH AS-PRESSURE (SECONDARY STEERING OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP27050306
163-6279: WIRING GP-SECONDARY STEERING
163-6279 WIRING GP-SECONDARY STEERING
S/N 7BW557-99999
PART OF 141-2800 STEERING AR-SECONDARY
S/N 7BW557-99999
PART OF 141-2800 STEERING AR-SECONDARY
For full view, you need register
Parts for your 962G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6450 | [1] | SWITCH AS-PRESSURE (PRIMARY STEERING OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 3S-2093 | [5] | STRAP-CABLE | |
| 3. | 140-3641 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 E | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW)(22CM) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(32CM) | |||
| 4. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 164-6582 | [1] | HARNESS AS | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE) | ||||
| 7. | 155-0621 C | [1] | CABLE AS | |
| 1M-4986 | [1] | TERMINAL-RING (0-GA, 1/2-IN SCREW) | ||
| 5P-0760 E | CABLE (0-GA, RED)(108CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 030-1707 | [1] | TERMINAL-RING (0-GA, 3/8-IN SCREW) | ||
| 8. | 130-5301 | [2] | CLIP | |
| 9. | 3K-0360 | [2] | SEAL-O-RING | |
| 10. | 4D-9517 | [2] | CLIP | |
| 11. | 8M-2770 | [2] | CLIP (LOOP) | |
| 12. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 16. | 3E-6450 | [1] | SWITCH AS-PRESSURE (SECONDARY STEERING OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP27050307
149-0249: WIRING GP-SENSOR
For full view, you need register
Parts for your 962G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2H-3429 | [1] | RING-RETAINING | |
| 2. | 2L-6726 | [1] | RING-RETAINING | |
| 3. | 4E-2250 | [1] | HOUSING | |
| 4. | 4E-2453 | [1] | SHAFT | |
| 5. | 4E-7088 | [1] | LEVER | |
| 6. | 6D-3025 | [2] | BALL BEARING | |
| 7. | 6V-0852 | [1] | CAP-DUST | |
| 8. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 9. | 7I-3236 | [1] | SUPPORT AS | |
| 10. | 7X-7662 | [1] | ROD END | |
| 11. | 8C-5607 | [6] | MOUNT-ISOLATION | |
| 12. | 8C-5608 | [3] | SPACER (6.5X9.5X25.4-MM THK) | |
| 13. | 9R-4921 I | [1] | HOSE AS | |
| 14. | 121-0284 Y | [1] | SENSOR GP-POSITION (LIFT) | |
| 15. | 122-2222 | [1] | ADAPTER | |
| 16. | 124-4592 | [1] | ROD END | |
| 17. | 124-4672 Y | [1] | SENSOR GP-PRESSURE (PAYLOAD, LIFT CYL HEAD END OIL) | |
| 19. | 127-5778 | [1] | TEE-O-RING PORT | |
| 20. | 130-5300 | [1] | CLIP | |
| 21. | 132-1451 | [1] | BRACKET AS | |
| 110-2023 M | [1] | STUD-WELD (M10X1.5X25-MM) | ||
| 22. | 163-0094 | [1] | ARM-BAIL | |
| 23. | 147-2764 | [1] | HARNESS AS-SENSOR (LIFT CYLINDER HEAD END OIL) | |
| 24. | 125-0380 M | [1] | NUT-HEX (M8X1.25-THD, LH) | |
| 25. | 3J-1907 | [3] | SEAL-O-RING | |
| 26. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 27. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 28. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 29. | 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | |
| 30. | 5P-9085 | [2] | CLIP (LOOP) | |
| 31. | 6V-2313 M | [2] | BOLT (M5X0.8X30-MM) | |
| 32. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 33. | 6V-8397 | [4] | SEAL-O-RING | |
| 34. | 6V-8636 | [1] | CONNECTOR | |
| 35. | 6V-9189 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 36. | 6V-9850 | [1] | ELBOW | |
| 37. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 39. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 40. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 41. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 42. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 43. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 44. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 45. | 9X-2480 M | [3] | BOLT (M6X1X45-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27050308
149-0249: WIRING GP-SENSOR
For full view, you need register
Parts for your 962G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2H-3429 | [1] | RING-RETAINING | |
| 2. | 2L-6726 | [1] | RING-RETAINING | |
| 3. | 4E-2250 | [1] | HOUSING | |
| 4. | 4E-2453 | [1] | SHAFT | |
| 5. | 4E-7088 | [1] | LEVER | |
| 6. | 6D-3025 | [2] | BALL BEARING | |
| 7. | 6V-0852 | [1] | CAP-DUST | |
| 8. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 9. | 7I-3236 | [1] | SUPPORT AS | |
| 10. | 7X-7662 | [1] | ROD END | |
| 11. | 8C-5607 | [6] | MOUNT-ISOLATION | |
| 12. | 8C-5608 | [3] | SPACER (6.5X9.5X25.4-MM THK) | |
| 13. | 9R-4921 I | [1] | HOSE AS | |
| 14. | 161-8904 CY | [1] | SENSOR GP-POSITION (ROTARY)(LIFT) | |
| 15. | 122-2222 | [1] | ADAPTER | |
| 16. | 124-4592 | [1] | ROD END | |
| 17. | 124-4672 Y | [1] | SENSOR GP-PRESSURE (PAYLOAD, LIFT CYL HEAD END OIL) | |
| 18. | 125-0901 | [1] | ROD | |
| 19. | 127-5778 | [1] | TEE-O-RING PORT | |
| 20. | 130-5300 | [1] | CLIP | |
| 21. | 132-1451 | [1] | BRACKET AS | |
| 110-2023 M | [1] | STUD-WELD (M10X1.5X25-MM) | ||
| 22. | 163-0094 | [1] | ARM-BAIL | |
| 23. | 147-2764 | [1] | HARNESS AS-SENSOR (LIFT CYLINDER HEAD END OIL) | |
| 24. | 125-0380 M | [1] | NUT-HEX (M8X1.25-THD, LH) | |
| 25. | 3J-1907 | [3] | SEAL-O-RING | |
| 26. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 27. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 28. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 29. | 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | |
| 30. | 5P-9085 | [2] | CLIP (LOOP) | |
| 31. | 6V-2313 M | [2] | BOLT (M5X0.8X30-MM) | |
| 32. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 33. | 6V-8397 | [4] | SEAL-O-RING | |
| 34. | 6V-8636 | [1] | CONNECTOR | |
| 35. | 6V-9189 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 36. | 6V-9850 | [1] | ELBOW | |
| 37. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 39. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 40. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 41. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 42. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 43. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 44. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 45. | 9X-2480 M | [3] | BOLT (M6X1X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP27050309
138-3122: AXLE AR-FIXED
138-3122 AXLE AR-FIXED -FRONT, STANDARD DIFFERENTIAL
S/N 7BW1-UP
PART OF 126-7741 POWER TRAIN AR
S/N 7BW1-UP
PART OF 126-7741 POWER TRAIN AR
For full view, you need register
